Study guide

2.2 Permissible Business Entities, Firm Names, and Filing Requirements

California Supplemental Examination CSE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: California Architects Practice Act & Professional Practice

1.1 Licensing, Board Authority, and Unlicensed Practice Exceptions 1.2 Mandatory Written Contracts & Required Provisions 1.3 Architect's Stamp, Signature, and Professional Liability

2 Chapter 2: Professional Conduct, Ethics & Business Entities

2.1 Rules of Professional Conduct & Disciplinary Grounds 2.2 Permissible Business Entities, Firm Names, and Filing Requirements 2.3 Copyright, Instruments of Service & Ownership of Architectural Documents

3 Chapter 3: Contractual Roles, Scope & Consultant Agreements

3.1 Standard Owner-Architect Agreements (AIA B101 / B102) & California Practice Realities 3.2 Consultant Selection, Prime-Consultant Agreements & Liability Flow-Down (AIA C401) 3.3 Project Delivery Methods & Impact of Project Funding Sources

4 Chapter 4: Risk Management, Dispute Resolution & Project Planning

4.1 Professional Standard of Care & Managing Contractual Risk and Liability 4.2 Dispute Resolution in California Practice: Mediation, Arbitration, and Litigation 4.3 Project Scheduling, Budgeting Assumptions, and Milestone Approvals

5 Chapter 5: Site Feasibility, Schematic Design & Discretionary Approvals

5.1 Site Feasibility Studies, Existing-Conditions Due Diligence & Project Impacts 5.2 Programming, Schematic Design Development & Stakeholder Engagement 5.3 Local Land-Use Control: General Plans, Zoning, Specific Plans & Local Ordinances 5.4 The Discretionary Approval Process: Use Permits, Variances, Design Review & Hearings 5.5 Entitlement Exhibits, Conditions of Approval & Leading the Approval Team

6 Chapter 6: Environmental Review & CEQA Compliance

6.1 CEQA Regulatory Framework: Lead, Responsible, and Trustee Agencies 6.2 CEQA Process: Statutory & Categorical Exemptions, Initial Studies, and (Mitigated) Negative Declarations 6.3 Environmental Impact Reports (EIR) & Official Filings (NOP, NOC, NOD, NOE)

7 Chapter 7: California Coastal Act & Specialized Regional Regulations

7.1 California Coastal Commission & Coastal Development Permits (CDP) 7.2 Local Coastal Programs (LCP), Coastal Zone Boundaries, and Appeals 7.3 Clean Air Act (CARB/AQMDs) & Clean Water Regulations (Porter-Cologne, RWQCB & SWPPP)

8 Chapter 8: State Agency Jurisdictions: DSA, HCAI & Essential Services

8.1 Division of the State Architect (DSA): Field Act & Public K-12/Community College Oversight 8.2 Department of Health Care Access and Information (HCAI): Alfred E. Alquist Act & Healthcare Facility Classification 8.3 Essential Services Buildings Seismic Safety Act (ESBSSA) & California Historical Building Code (CHBC)

9 Chapter 9: California Building Code (CBC Title 24 Part 2) Core Architecture Provisions

9.1 Occupancy Classifications, Building Heights, and Allowable Floor Areas (CBC Chapters 3 & 5) 9.2 Fire and Smoke Protection Features, Fire Barriers, and Fire-Resistance Ratings (CBC Chapter 7) 9.3 Means of Egress, Occupant Load Calculations, and Exit Separation (CBC Chapter 10) 9.4 California Health and Safety Code: Building Standards Law, State Housing Law & Health Mandates

10 Chapter 10: Accessibility Requirements: Title 24 Chapter 11B & ADA

10.1 California Accessibility Framework: CBC Chapter 11B vs Federal ADA Standards 10.2 Accessible Routes, Entrances, Parking, and Site Arrival Points 10.3 Accessible Restrooms, Signage, Scoping, and Path of Travel Alteration Thresholds

11 Chapter 11: California Site Conditions & Natural Hazards

11.1 Seismic Hazard Mapping: Alquist-Priolo Earthquake Fault Zoning Act & Liquefaction 11.2 Wildland-Urban Interface (WUI) & Fire Hazard Severity Zones (CBC Chapter 7A & CFC Part 9) 11.3 Flood Hazard Zones (FEMA/DWR) & California Wind Exposure Categories

12 Chapter 12: Energy Efficiency: California Energy Code (Title 24 Part 6)

12.1 Energy Code Compliance Approaches: Prescriptive vs Performance & Time Dependent Valuation (TDV) 12.2 Mandatory Energy Measures: Envelope, HVAC, Lighting, Solar PV & Energy Storage Systems

13 Chapter 13: Sustainability (CALGreen) & Systems Integration

13.1 CALGreen (Title 24 Part 11) Mandatory Nonresidential & Residential Green Building Measures 13.2 Life-Cycle Cost Analysis (LCCA) & Value Engineering in California Practice 13.3 Building Systems Integration: MEP Coordination, Materials Evaluation & Acoustic Control

14 Chapter 14: Construction Document Requirements & Regulatory Coordination

14.1 CD Content, Detailing & Inter-Disciplinary Coordination for Agency Approval and Bidding 14.2 Authority Having Jurisdiction (AHJ) Hierarchy, Local Amendments & Local Finding Requirements 14.3 Reconciling Conflicting Codes, Standards, and Regulatory Mandates

15 Chapter 15: Plan Check & Permitting Processes

15.1 Permitting Procedures, Plan Check Review, Agency Comment Inquiries & Approval Pathways 15.2 Phased Permitting, Deferred Approvals, Encroachment Permits & Public Right-of-Way Coordination

16 Chapter 16: California Public Contract Code & Bidding Procedures

16.1 Public Works Bidding, Competitive Bidding Thresholds & Responsive vs Responsible Bidders 16.2 Subletting and Subcontracting Fair Practices Act & Subcontractor Listing Rules (PCC §§ 4100–4114) 16.3 California Prevailing Wage Requirements, DIR Registration & Certified Payroll Records

17 Chapter 17: California Mechanics Lien Law & Payment Remedies

17.1 20-Day Preliminary Notice Requirements & Timing (Civil Code § 8200) 17.2 Mechanics Liens, Recording Deadlines & Impact of Notice of Completion (Civil Code §§ 8400–8494) 17.3 Stop Payment Notices, Payment Bonds & Design Professional Liens (Civil Code §§ 8300–8319, 9350–9566)

18 Chapter 18: Construction Administration: Pre-Construction, Submittals, Changes & Field Observation

18.1 Pre-Construction & Pre-Installation Meetings and the Construction Manager's Impact on Services 18.2 Shop Drawings, Submittals & Architect's Deferred Submittal Review and Stamp 18.3 Construction Changes: Change Orders (CO), CCDs, ASIs & DSA Category A/B CCDs 18.4 Periodic Site Observations, Field Reports & the Means-and-Methods Boundary

19 Chapter 19: Inspection, Close-Out & Post-Construction Services

19.1 Special Inspections, Testing (CBC Chapter 17) & DSA/HCAI Continuous Field Inspection 19.2 Project Close-Out, Payment Applications (G702/G703), Retainage & California Warranty/Defect Limitations (CCP §§ 337.1 & 337.15) 19.3 Post-Construction Services, Record Documents & the Warranty Period 19.4 Construction Industry Standards, Detailing & Referenced Standards

2.2 Permissible Business Entities, Firm Names, and Filing Requirements

Key Takeaways Explain This Topic AI

California architectural practice may be organized as a Sole Proprietorship, General Partnership, Limited Liability Partnership (LLP), or Professional Architectural Corporation under the Moscone-Knox Act.

Traditional Limited Liability Companies (LLCs) are strictly prohibited from practicing architecture in California under Corporations Code § 17701.04(e).

Under the Moscone-Knox Professional Corporation Act (Corp Code § 13400 et seq.), at least one director/officer must be a California-licensed architect, and allied professionals (engineers, landscape architects, land surveyors) may own up to 49% minority shares.

Firm names must comply with BPC § 5536, 5580 and CCR § 134; using terms like "Architect" or "Architecture" requires licensed supervision, and fictitious business names must be filed with the county clerk.

Retired or deceased partner names may remain in a firm title only if specific conditions are met and no unlicensed person controls architectural decisions.

Last updated: September 2026

Permissible Business Entities, Firm Names, and Filing Requirements

Architectural practice in California is tightly bound to professional responsibility and personal accountability. When establishing an architectural firm, practitioners must navigate state corporate statutes, the Architects Practice Act, and specific restrictions enacted by the California Legislature to prevent the dilution of professional liability. Understanding permissible entity formations, ownership ratios, naming restrictions, and fictitious business name filings is critical for both the California Supplemental Examination (CSE) and lawful practice.

Permissible Architectural Business Entities

Under California law, architects may practice through several legal structures, each offering distinct liability profiles, governance requirements, and tax classifications:

1. Sole Proprietorship

The simplest business structure, requiring no formal corporate formation filings with the California Secretary of State. The architect is the sole owner, directly controls all operations, and assumes unlimited personal liability for all contract debts, tort liabilities, and professional malpractice claims.

2. General Partnership (BPC § 5535)

A partnership formed by two or more individuals. Under BPC § 5535, an architectural partnership may include non-architect partners, provided that all architectural services, documents, and supervision are directed exclusively by a California-licensed architect partner. In a general partnership, all partners share joint and several personal liability for all business obligations and malpractice acts of any other partner.

3. Registered Limited Liability Partnership (LLP) (BPC § 5535.3, Corp Code § 16951)

California permits architects to practice as a Registered Limited Liability Partnership (LLP). The LLP structure provides partners with a partial liability shield:

Partners are protected against vicarious liability for the professional malpractice, negligence, and contractual breaches committed by other partners or employees.

Each partner remains personally liable for their own acts of negligence, omissions, or wrongful conduct, as well as for debts where personal guarantees were executed.

Statutory security requirements (Corp Code § 16956): LLPs must maintain professional liability insurance, escrow funds, or net worth equivalent to $100,000 per licensed partner , with a minimum statutory floor of $500,000 and a ceiling of $5,000,000.

4. Professional Architectural Corporation (Corp Code § 13400 et seq., BPC § 5536)

Organized under the Moscone-Knox Professional Corporation Act , this structure allows architects to form a corporation dedicated to providing architectural services. The corporation shields individual shareholders from personal liability for general business debts, commercial leases, and vendor obligations. However, like an LLP, it never shields an individual architect from personal tort liability for their own malpractice.

The Absolute Prohibition on LLCs in California

A perennial trap on the California Supplemental Examination concerns the Limited Liability Company (LLC) .

Critical Exam Rule: In California, licensed architects cannot form a Limited Liability Company (LLC) or a Professional LLC (PLLC).

Under California Corporations Code § 17701.04(e), a limited liability company is strictly barred from rendering professional services if the profession requires a state license under the Business and Professions Code, unless specifically authorized in that profession’s governing practice act. Because the Architects Practice Act does not explicitly authorize LLCs, the California Secretary of State will reject any articles of organization attempting to form an architectural LLC, and CAB will classify any such practice as unlawful.

Ownership & Management Rules Under Moscone-Knox

Under the Moscone-Knox Professional Corporation Act (Corporations Code § 13400 et seq.) and BPC § 5535.2, strict statutory rules govern who may own shares, serve as directors, and manage professional architectural corporations:

1. Officer and Director Requirements

In a professional architectural corporation with a single shareholder, that individual must serve as both president and treasurer, and may also fill other officer roles.

In multi-shareholder corporations, at least one director and the president/chief executive officer must be a California-licensed architect .

2. Allied Professional Shareholding (Corp Code § 13401.5(h))

While non-professionals cannot own shares in a professional corporation, the California Legislature enacted statutory exceptions allowing specific licensed allied professionals to own minority equity and serve as officers or directors. Licensed architects must own at least 51% of all corporate voting stock and equity. The remaining up to 49% minority interest may be owned exclusively by the following licensed design and construction professionals:

  • Licensed Professional Engineers (civil, structural, mechanical, electrical)
  • Licensed Landscape Architects
  • Licensed Land Surveyors
  • Licensed Contractors (under BPC Chapter 9, Division 3)

Unlicensed employees, investors, or family members are legally barred from holding shares or serving on the board of directors. If a shareholder dies or loses their professional license, their shares must be sold to the corporation or another licensed practitioner within six months of death (or 90 days of license disqualification).

Firm Naming Restrictions & Filing Requirements

The California Architects Board strictly monitors architectural firm names to avoid misleading the consuming public (BPC §§ 5536, 5580; CCR Title 16 § 134):

Use of Statutory Titles: No firm name, signage, or advertisement may incorporate the words "Architect", "Architecture", or "Architectural" unless the entity employs a California-licensed architect in responsible control of all professional services.

Deceased or Retired Partners (BPC § 5535.1): A firm may continue to utilize the surname of a deceased or retired partner in its firm name only if that partner was a licensed architect or allied professional, was affiliated with the firm at the time of retirement or death, and the firm files notice with the Board.

Fictitious Business Name (FBN) Statements (BPC § 17900 et seq.):

An FBN filing is mandatory whenever an individual operates under a name not including their legal surname (e.g., "Pacific Rim Studio"), or when a partnership name implies additional owners not named (e.g., "John Doe & Associates").

The FBN statement must be filed with the County Clerk in the county of the firm's principal place of business within 40 days of commencing business.

Notice must be published in a newspaper of general circulation in the county once a week for four consecutive weeks , followed by filing an affidavit of publication with the county clerk within 30 days of the last publication.

Comparison of Architectural Business Structures in California

Business Entity Governing Law Personal Liability for General Debt Malpractice Liability Shield Permissible Allied Ownership

Sole Proprietorship Common Law / BPC Unlimited personal liability None (personal liability) None (single owner)

General Partnership Corp Code § 16100; BPC § 5535 Unlimited joint and several liability None (joint & several for all partner acts) Unlicensed or allied partners allowed if architect controls design

Limited Liability Partnership (LLP) Corp Code § 16951; BPC § 5535.3 Limited to partnership assets Shielded from other partners' malpractice; liable for own acts Architects and allied professionals; mandatory $100k/partner insurance

Professional Corporation Moscone-Knox (Corp Code § 13400) Limited to corporate assets Shielded from other shareholders' malpractice; liable for own acts Up to 49% allied professionals; architects must hold ≥ 51%

Limited Liability Company (LLC) Corp Code § 17701.04(e) PROHIBITED PROHIBITED STRICTLY DISALLOWED IN CA