Study guide
5.2 Programming, Schematic Design Development & Stakeholder Engagement
California Supplemental Examination CSE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: California Architects Practice Act & Professional Practice
1.1 Licensing, Board Authority, and Unlicensed Practice Exceptions 1.2 Mandatory Written Contracts & Required Provisions 1.3 Architect's Stamp, Signature, and Professional Liability
2 Chapter 2: Professional Conduct, Ethics & Business Entities
2.1 Rules of Professional Conduct & Disciplinary Grounds 2.2 Permissible Business Entities, Firm Names, and Filing Requirements 2.3 Copyright, Instruments of Service & Ownership of Architectural Documents
3 Chapter 3: Contractual Roles, Scope & Consultant Agreements
3.1 Standard Owner-Architect Agreements (AIA B101 / B102) & California Practice Realities 3.2 Consultant Selection, Prime-Consultant Agreements & Liability Flow-Down (AIA C401) 3.3 Project Delivery Methods & Impact of Project Funding Sources
4 Chapter 4: Risk Management, Dispute Resolution & Project Planning
4.1 Professional Standard of Care & Managing Contractual Risk and Liability 4.2 Dispute Resolution in California Practice: Mediation, Arbitration, and Litigation 4.3 Project Scheduling, Budgeting Assumptions, and Milestone Approvals
5 Chapter 5: Site Feasibility, Schematic Design & Discretionary Approvals
5.1 Site Feasibility Studies, Existing-Conditions Due Diligence & Project Impacts 5.2 Programming, Schematic Design Development & Stakeholder Engagement 5.3 Local Land-Use Control: General Plans, Zoning, Specific Plans & Local Ordinances 5.4 The Discretionary Approval Process: Use Permits, Variances, Design Review & Hearings 5.5 Entitlement Exhibits, Conditions of Approval & Leading the Approval Team
6 Chapter 6: Environmental Review & CEQA Compliance
6.1 CEQA Regulatory Framework: Lead, Responsible, and Trustee Agencies 6.2 CEQA Process: Statutory & Categorical Exemptions, Initial Studies, and (Mitigated) Negative Declarations 6.3 Environmental Impact Reports (EIR) & Official Filings (NOP, NOC, NOD, NOE)
7 Chapter 7: California Coastal Act & Specialized Regional Regulations
7.1 California Coastal Commission & Coastal Development Permits (CDP) 7.2 Local Coastal Programs (LCP), Coastal Zone Boundaries, and Appeals 7.3 Clean Air Act (CARB/AQMDs) & Clean Water Regulations (Porter-Cologne, RWQCB & SWPPP)
8 Chapter 8: State Agency Jurisdictions: DSA, HCAI & Essential Services
8.1 Division of the State Architect (DSA): Field Act & Public K-12/Community College Oversight 8.2 Department of Health Care Access and Information (HCAI): Alfred E. Alquist Act & Healthcare Facility Classification 8.3 Essential Services Buildings Seismic Safety Act (ESBSSA) & California Historical Building Code (CHBC)
9 Chapter 9: California Building Code (CBC Title 24 Part 2) Core Architecture Provisions
9.1 Occupancy Classifications, Building Heights, and Allowable Floor Areas (CBC Chapters 3 & 5) 9.2 Fire and Smoke Protection Features, Fire Barriers, and Fire-Resistance Ratings (CBC Chapter 7) 9.3 Means of Egress, Occupant Load Calculations, and Exit Separation (CBC Chapter 10) 9.4 California Health and Safety Code: Building Standards Law, State Housing Law & Health Mandates
10 Chapter 10: Accessibility Requirements: Title 24 Chapter 11B & ADA
10.1 California Accessibility Framework: CBC Chapter 11B vs Federal ADA Standards 10.2 Accessible Routes, Entrances, Parking, and Site Arrival Points 10.3 Accessible Restrooms, Signage, Scoping, and Path of Travel Alteration Thresholds
11 Chapter 11: California Site Conditions & Natural Hazards
11.1 Seismic Hazard Mapping: Alquist-Priolo Earthquake Fault Zoning Act & Liquefaction 11.2 Wildland-Urban Interface (WUI) & Fire Hazard Severity Zones (CBC Chapter 7A & CFC Part 9) 11.3 Flood Hazard Zones (FEMA/DWR) & California Wind Exposure Categories
12 Chapter 12: Energy Efficiency: California Energy Code (Title 24 Part 6)
12.1 Energy Code Compliance Approaches: Prescriptive vs Performance & Time Dependent Valuation (TDV) 12.2 Mandatory Energy Measures: Envelope, HVAC, Lighting, Solar PV & Energy Storage Systems
13 Chapter 13: Sustainability (CALGreen) & Systems Integration
13.1 CALGreen (Title 24 Part 11) Mandatory Nonresidential & Residential Green Building Measures 13.2 Life-Cycle Cost Analysis (LCCA) & Value Engineering in California Practice 13.3 Building Systems Integration: MEP Coordination, Materials Evaluation & Acoustic Control
14 Chapter 14: Construction Document Requirements & Regulatory Coordination
14.1 CD Content, Detailing & Inter-Disciplinary Coordination for Agency Approval and Bidding 14.2 Authority Having Jurisdiction (AHJ) Hierarchy, Local Amendments & Local Finding Requirements 14.3 Reconciling Conflicting Codes, Standards, and Regulatory Mandates
15 Chapter 15: Plan Check & Permitting Processes
15.1 Permitting Procedures, Plan Check Review, Agency Comment Inquiries & Approval Pathways 15.2 Phased Permitting, Deferred Approvals, Encroachment Permits & Public Right-of-Way Coordination
16 Chapter 16: California Public Contract Code & Bidding Procedures
16.1 Public Works Bidding, Competitive Bidding Thresholds & Responsive vs Responsible Bidders 16.2 Subletting and Subcontracting Fair Practices Act & Subcontractor Listing Rules (PCC §§ 4100–4114) 16.3 California Prevailing Wage Requirements, DIR Registration & Certified Payroll Records
17 Chapter 17: California Mechanics Lien Law & Payment Remedies
17.1 20-Day Preliminary Notice Requirements & Timing (Civil Code § 8200) 17.2 Mechanics Liens, Recording Deadlines & Impact of Notice of Completion (Civil Code §§ 8400–8494) 17.3 Stop Payment Notices, Payment Bonds & Design Professional Liens (Civil Code §§ 8300–8319, 9350–9566)
18 Chapter 18: Construction Administration: Pre-Construction, Submittals, Changes & Field Observation
18.1 Pre-Construction & Pre-Installation Meetings and the Construction Manager's Impact on Services 18.2 Shop Drawings, Submittals & Architect's Deferred Submittal Review and Stamp 18.3 Construction Changes: Change Orders (CO), CCDs, ASIs & DSA Category A/B CCDs 18.4 Periodic Site Observations, Field Reports & the Means-and-Methods Boundary
19 Chapter 19: Inspection, Close-Out & Post-Construction Services
19.1 Special Inspections, Testing (CBC Chapter 17) & DSA/HCAI Continuous Field Inspection 19.2 Project Close-Out, Payment Applications (G702/G703), Retainage & California Warranty/Defect Limitations (CCP §§ 337.1 & 337.15) 19.3 Post-Construction Services, Record Documents & the Warranty Period 19.4 Construction Industry Standards, Detailing & Referenced Standards
5.2 Programming, Schematic Design Development & Stakeholder Engagement
Key Takeaways Explain This Topic AI
Under AIA B101-2017 Section 3.2, the architect reviews the owner-furnished program, schedule, and budget, prepares a preliminary evaluation of each, and discusses alternative approaches before producing schematic design documents illustrating the scale and relationship of project components.
An architectural program converts the owner's functional requirements into net assignable area, then applies a gross-to-net efficiency factor; California code drivers such as occupant load, exiting, accessibility clearances, and Title 24 envelope requirements must be tested against the program before the massing is fixed.
Stakeholder and community feedback is advisory input, not an approval; only the decision body identified in the local ordinance can approve or condition a project, and the architect must document comments without representing that they bind the agency.
Public agency clients such as school districts, hospital districts, and cities hold their meetings under the Ralph M. Brown Act (Government Code Section 54950 et seq.), which requires posted agendas at least 72 hours before a regular meeting and prohibits serial private discussions among a majority of the body.
For a qualifying housing development project that complies with objective standards, Government Code Section 65905.5 limits a local agency to no more than five public hearings, which compresses the design team's feedback and revision cycles.
Last updated: September 2026
Programming, Schematic Design Development & Stakeholder Engagement
Two CSE tasks live here: develop schematic designs based on program requirements and local, state, and federal regulatory jurisdictions , and prepare and present schematic design documents to stakeholders such as community groups for feedback . The exam treats these as professional-practice questions rather than design questions. It asks who supplies the program, what the architect owes when the program and the budget do not reconcile, how consultants and users are brought into the design decision, and what legal weight community input actually carries.
Program Development and Validation
The owner is contractually responsible for the program. Under AIA B101-2017 Section 3.2 , the architect reviews the program and other information furnished by the owner, prepares a preliminary evaluation of the program, schedule, budget for the cost of the work, project site, and the proposed procurement or delivery method, and reports to the owner. The architect is entitled to rely on the accuracy of owner-furnished information — but the duty to evaluate it and report discrepancies is the architect's, and that duty is exactly what the exam probes.
Programming converts stated needs into measured area:
Functional program — activities, users, occupancy counts, hours of use, adjacency and separation requirements, equipment, and growth assumptions.
Net assignable area — the usable area of each programmed space.
Gross area — net area multiplied by an efficiency factor that accounts for circulation, structure, shafts, restrooms, and mechanical rooms. Efficiency varies sharply by building type; a laboratory or hospital carries far more non-assignable area than an open-plan office.
Code testing — occupant load and exit capacity, accessible clearances and maneuvering space, plumbing fixture counts, and Title 24 envelope and lighting assumptions applied to the programmed area before massing is set.
Site testing — the program is placed in the buildable envelope established during feasibility. When it does not fit, the honest options are reducing program, increasing height or footprint through a discretionary approval, changing construction type, or changing the site.
Program validation is the working session in which the owner, user groups, and consultants confirm or revise the program before design proceeds. It is cheap; discovering the same disagreement during design development is not.
Developing the Design Solution with Clients, Users, and Consultants
Schematic design under B101-2017 Section 3.2 produces documents that illustrate the scale and relationship of project components , typically a site plan, floor plans, sections, elevations, and a preliminary description of building systems. The exam's emphasis is on process :
Alternative approaches. The architect discusses alternative approaches to design and construction with the owner. Presenting a single scheme with no alternatives is a weak answer on the exam and a weak practice.
Consultant integration. Structural, mechanical, electrical, plumbing, civil, landscape, and specialty consultants are engaged early enough to influence the scheme rather than to document it. In California, the seismic system, the Title 24 Part 6 compliance path, and accessible circulation are all scheme-level decisions.
User groups. For institutional clients, user groups (departments, faculty, clinical staff) provide functional detail but do not control budget or scope. The architect routes their requests through the owner's designated representative so that the single-point-of-contact structure in the agreement is preserved.
Decision logs. Every meeting produces a written record of what was decided, who decided it, and what remains open. This is the practical answer to the exam's recurring "how should the architect respond" question.
Mock-ups and simulations. Physical mock-ups, virtual walkthroughs, and full-size layout tape-outs resolve user disagreement about clearances and finishes before they become construction changes.
Presenting to Stakeholders and Community Groups
California projects are frequently reviewed in public. The architect must understand what these forums are and what they are not.
Forum Who Convenes Legal Weight Architect's Deliverable
Neighborhood or community meeting Applicant, sometimes required by ordinance as an application prerequisite Advisory; the record may be cited at hearing Context massing, streetscape elevations, shadow and view studies, plain-language project description
Homeowners' association or private design review board Private governing documents Contractually binding on the owner, independent of the public agency Materials, colors, roof forms, landscape concept
Advisory design review committee or architectural review board Local ordinance Recommendation to the decision body, occasionally final for minor projects Design review submittal, materials board, precedent imagery
Planning commission or governing board hearing Local ordinance Decision or recommendation; subject to appeal Hearing exhibits, findings support, response-to-comment matrix
Public agency board study session (school, hospital, city) Ralph M. Brown Act Public meeting of the client's own governing body Board-level presentation, budget and schedule alignment
The Brown Act (Government Code Section 54950 et seq.) governs meetings of local legislative bodies, including school district and special district boards. Regular-meeting agendas must be posted at least 72 hours in advance, action generally cannot be taken on items not on the agenda, and a majority of the body may not use serial private communications — including an architect relaying positions from one member to another — to develop a collective concurrence outside a public meeting. An architect who carries messages between board members can cause the client to violate the Act.
Housing projects are subject to compressed engagement. Under Government Code Section 65905.5, a local agency may hold no more than five hearings on a housing development project that complies with applicable objective standards, and the Housing Accountability Act constrains the agency's ability to deny or reduce the density of a compliant project. Practically, this means the design team has fewer opportunities to iterate in public and must front-load outreach.
Managing Feedback Without Losing the Project
Separate comment from condition. Community comments are input. Only a condition adopted by the decision body is binding. Never tell a client that a neighborhood group "approved" anything.
Track and respond. Maintain a comment-and-response matrix. At the hearing, the ability to show that each substantive comment was considered is worth more than the redesign itself.
Control scope creep. Repeated redesign driven by community input is an additional-services event under B101 Section 4. Identify the trigger in writing when it happens, not at the end of the phase.
Protect the CEQA and appeal record. Statements made in community meetings can appear in litigation. Describe the project accurately and consistently across every forum.
CSE Exam Traps & Practical Takeaways
Trap 1: Treating community consensus as approval. The correct exam answer routes final authority to the decision body identified in the ordinance.
Trap 2: Accepting the program without evaluation. B101 requires a preliminary evaluation of the program, schedule, and budget. Silently designing an unbuildable or unaffordable program is a standard-of-care failure.
Trap 3: Taking user-group direction as a scope change. User requests that change scope must be routed to the owner's representative and confirmed in writing before they enter the drawings.
Trap 4: Becoming the conduit for a Brown Act violation. Do not carry substantive positions between members of a public board outside a noticed meeting.
Trap 5: Presenting only one scheme. The exam rewards the architect who presents alternatives with their cost, schedule, and approval consequences, and lets the owner choose.