Study guide

8.2 Department of Health Care Access and Information (HCAI): Alfred E. Alquist Act & Healthcare Facility Classification

California Supplemental Examination CSE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: California Architects Practice Act & Professional Practice

1.1 Licensing, Board Authority, and Unlicensed Practice Exceptions 1.2 Mandatory Written Contracts & Required Provisions 1.3 Architect's Stamp, Signature, and Professional Liability

2 Chapter 2: Professional Conduct, Ethics & Business Entities

2.1 Rules of Professional Conduct & Disciplinary Grounds 2.2 Permissible Business Entities, Firm Names, and Filing Requirements 2.3 Copyright, Instruments of Service & Ownership of Architectural Documents

3 Chapter 3: Contractual Roles, Scope & Consultant Agreements

3.1 Standard Owner-Architect Agreements (AIA B101 / B102) & California Practice Realities 3.2 Consultant Selection, Prime-Consultant Agreements & Liability Flow-Down (AIA C401) 3.3 Project Delivery Methods & Impact of Project Funding Sources

4 Chapter 4: Risk Management, Dispute Resolution & Project Planning

4.1 Professional Standard of Care & Managing Contractual Risk and Liability 4.2 Dispute Resolution in California Practice: Mediation, Arbitration, and Litigation 4.3 Project Scheduling, Budgeting Assumptions, and Milestone Approvals

5 Chapter 5: Site Feasibility, Schematic Design & Discretionary Approvals

5.1 Site Feasibility Studies, Existing-Conditions Due Diligence & Project Impacts 5.2 Programming, Schematic Design Development & Stakeholder Engagement 5.3 Local Land-Use Control: General Plans, Zoning, Specific Plans & Local Ordinances 5.4 The Discretionary Approval Process: Use Permits, Variances, Design Review & Hearings 5.5 Entitlement Exhibits, Conditions of Approval & Leading the Approval Team

6 Chapter 6: Environmental Review & CEQA Compliance

6.1 CEQA Regulatory Framework: Lead, Responsible, and Trustee Agencies 6.2 CEQA Process: Statutory & Categorical Exemptions, Initial Studies, and (Mitigated) Negative Declarations 6.3 Environmental Impact Reports (EIR) & Official Filings (NOP, NOC, NOD, NOE)

7 Chapter 7: California Coastal Act & Specialized Regional Regulations

7.1 California Coastal Commission & Coastal Development Permits (CDP) 7.2 Local Coastal Programs (LCP), Coastal Zone Boundaries, and Appeals 7.3 Clean Air Act (CARB/AQMDs) & Clean Water Regulations (Porter-Cologne, RWQCB & SWPPP)

8 Chapter 8: State Agency Jurisdictions: DSA, HCAI & Essential Services

8.1 Division of the State Architect (DSA): Field Act & Public K-12/Community College Oversight 8.2 Department of Health Care Access and Information (HCAI): Alfred E. Alquist Act & Healthcare Facility Classification 8.3 Essential Services Buildings Seismic Safety Act (ESBSSA) & California Historical Building Code (CHBC)

9 Chapter 9: California Building Code (CBC Title 24 Part 2) Core Architecture Provisions

9.1 Occupancy Classifications, Building Heights, and Allowable Floor Areas (CBC Chapters 3 & 5) 9.2 Fire and Smoke Protection Features, Fire Barriers, and Fire-Resistance Ratings (CBC Chapter 7) 9.3 Means of Egress, Occupant Load Calculations, and Exit Separation (CBC Chapter 10) 9.4 California Health and Safety Code: Building Standards Law, State Housing Law & Health Mandates

10 Chapter 10: Accessibility Requirements: Title 24 Chapter 11B & ADA

10.1 California Accessibility Framework: CBC Chapter 11B vs Federal ADA Standards 10.2 Accessible Routes, Entrances, Parking, and Site Arrival Points 10.3 Accessible Restrooms, Signage, Scoping, and Path of Travel Alteration Thresholds

11 Chapter 11: California Site Conditions & Natural Hazards

11.1 Seismic Hazard Mapping: Alquist-Priolo Earthquake Fault Zoning Act & Liquefaction 11.2 Wildland-Urban Interface (WUI) & Fire Hazard Severity Zones (CBC Chapter 7A & CFC Part 9) 11.3 Flood Hazard Zones (FEMA/DWR) & California Wind Exposure Categories

12 Chapter 12: Energy Efficiency: California Energy Code (Title 24 Part 6)

12.1 Energy Code Compliance Approaches: Prescriptive vs Performance & Time Dependent Valuation (TDV) 12.2 Mandatory Energy Measures: Envelope, HVAC, Lighting, Solar PV & Energy Storage Systems

13 Chapter 13: Sustainability (CALGreen) & Systems Integration

13.1 CALGreen (Title 24 Part 11) Mandatory Nonresidential & Residential Green Building Measures 13.2 Life-Cycle Cost Analysis (LCCA) & Value Engineering in California Practice 13.3 Building Systems Integration: MEP Coordination, Materials Evaluation & Acoustic Control

14 Chapter 14: Construction Document Requirements & Regulatory Coordination

14.1 CD Content, Detailing & Inter-Disciplinary Coordination for Agency Approval and Bidding 14.2 Authority Having Jurisdiction (AHJ) Hierarchy, Local Amendments & Local Finding Requirements 14.3 Reconciling Conflicting Codes, Standards, and Regulatory Mandates

15 Chapter 15: Plan Check & Permitting Processes

15.1 Permitting Procedures, Plan Check Review, Agency Comment Inquiries & Approval Pathways 15.2 Phased Permitting, Deferred Approvals, Encroachment Permits & Public Right-of-Way Coordination

16 Chapter 16: California Public Contract Code & Bidding Procedures

16.1 Public Works Bidding, Competitive Bidding Thresholds & Responsive vs Responsible Bidders 16.2 Subletting and Subcontracting Fair Practices Act & Subcontractor Listing Rules (PCC §§ 4100–4114) 16.3 California Prevailing Wage Requirements, DIR Registration & Certified Payroll Records

17 Chapter 17: California Mechanics Lien Law & Payment Remedies

17.1 20-Day Preliminary Notice Requirements & Timing (Civil Code § 8200) 17.2 Mechanics Liens, Recording Deadlines & Impact of Notice of Completion (Civil Code §§ 8400–8494) 17.3 Stop Payment Notices, Payment Bonds & Design Professional Liens (Civil Code §§ 8300–8319, 9350–9566)

18 Chapter 18: Construction Administration: Pre-Construction, Submittals, Changes & Field Observation

18.1 Pre-Construction & Pre-Installation Meetings and the Construction Manager's Impact on Services 18.2 Shop Drawings, Submittals & Architect's Deferred Submittal Review and Stamp 18.3 Construction Changes: Change Orders (CO), CCDs, ASIs & DSA Category A/B CCDs 18.4 Periodic Site Observations, Field Reports & the Means-and-Methods Boundary

19 Chapter 19: Inspection, Close-Out & Post-Construction Services

19.1 Special Inspections, Testing (CBC Chapter 17) & DSA/HCAI Continuous Field Inspection 19.2 Project Close-Out, Payment Applications (G702/G703), Retainage & California Warranty/Defect Limitations (CCP §§ 337.1 & 337.15) 19.3 Post-Construction Services, Record Documents & the Warranty Period 19.4 Construction Industry Standards, Detailing & Referenced Standards

8.2 Department of Health Care Access and Information (HCAI): Alfred E. Alquist Act & Healthcare Facility Classification

Key Takeaways Explain This Topic AI

The Alfred E. Alquist Hospital Facilities Seismic Safety Act of 1983 (Health & Safety Code § 129675 et seq.) requires acute care hospitals to remain fully operational and functional post-earthquake, not merely life-safe.

HCAI (formerly OSHPD) exercises centralized statewide building jurisdiction over acute care healthcare facilities, enforcing specialized California Building Code Title 24 amendments.

Healthcare facility oversight is categorized into five distinct tiers (HCAI 1 through HCAI 5); notably, HCAI 3 outpatient clinics are permitted primarily through local municipal building departments rather than direct state plan review.

The Testing, Inspection, and Observation (TIO) program is a mandatory pre-construction document authored by the design professionals that governs all structural and non-structural testing and inspector milestones.

Seismic compliance is governed by dual ratings: Structural Performance Categories (SPC-1 through SPC-5) and Non-structural Performance Categories (NPC-1 through NPC-5), with NPC-5 mandating 72-hour utility autonomy.

Last updated: September 2026

Department of Health Care Access and Information (HCAI): Alfred E. Alquist Act & Healthcare Facility Classification

Healthcare facilities in California must satisfy the nation's most stringent building safety regulations. While standard commercial buildings are engineered to prevent structural collapse so that occupants can safely evacuate (a basic "life safety" threshold), hospitals must achieve a fundamentally higher standard: they must remain fully operational and functional during and immediately following a catastrophic earthquake. Candidates preparing for the California Supplemental Examination (CSE) must understand the regulatory mechanisms of the Department of Health Care Access and Information (HCAI) —formerly known as the Office of Statewide Health Planning and Development (OSHPD) —under the Alfred E. Alquist Hospital Facilities Seismic Safety Act .

The Alfred E. Alquist Act: Origin and Legislative Purpose

On February 9, 1971, the magnitude 6.5 San Fernando (Sylmar) earthquake caused severe structural damage and partial collapse across several modern medical centers. The newly constructed Olive View Hospital and the Veterans Administration Hospital suffered catastrophic structural failures, resulting in 49 deaths and destroying emergency medical treatment capacity at the precise moment disaster victims required intensive surgical care. In response, the California Legislature enacted the Hospital Seismic Safety Act of 1972, later updated and reenacted as the Alfred E. Alquist Hospital Facilities Seismic Safety Act of 1983 , codified in California Health and Safety Code Section 129675 et seq.

The Alquist Act declares that hospitals perform essential public services that must remain intact following disaster. The statute preempts local municipal building authorities, centralizing regulatory, plan check, and inspection authority under the state. In 2021, OSHPD was formally renamed the Department of Health Care Access and Information (HCAI) , though its administrative division, the Facilities Development Division (FDD), continues to enforce Title 24, Part 1, Chapter 7.

HCAI Facility Classifications (HCAI 1 through 5)

A primary topic tested on the CSE is the distinction between healthcare building classifications and their respective jurisdictional authorities. California Health and Safety Code and Title 24 divide healthcare facilities into five distinct categories:

1. HCAI 1: General Acute Care Hospitals (GACH) & Acute Psychiatric

Scope: Includes all buildings housing 24-hour inpatient acute services: operating rooms, intensive care units (ICUs), emergency departments, diagnostic imaging suites, and obstetrical units.

Regulatory Reach: Subject to full, direct HCAI jurisdiction. Architectural, structural, fire/life safety, mechanical, plumbing, electrical, and accessibility reviews are performed entirely by HCAI staff engineers.

Seismic Standard: Designed to the highest seismic importance criteria, requiring complete structural ductility, heavy non-structural equipment anchorage, and emergency utility autonomy.

2. HCAI 2: Skilled Nursing and Intermediate Care Facilities

Scope: Single-story, wood-frame or light-gauge steel construction buildings housing Skilled Nursing Facilities (SNFs) or Intermediate Care Facilities (ICFs).

Regulatory Reach: Direct HCAI jurisdiction, but utilizing streamlined plan review standards. Structural emphasis is focused on rapid life-safety egress and fire protection rather than continuous acute surgical operability.

3. HCAI 3: Licensed Outpatient Clinics (Critical CSE Distinction!)

Scope: Licensed primary care clinics, multi-specialty outpatient medical buildings, and ambulatory surgical centers operating under California Health and Safety Code Section 1200.

Jurisdictional Authority: Local Building Department. Under California Health and Safety Code § 129885, plan review, building permit issuance, and construction inspection for HCAI 3 clinics are delegated to the local municipal or county building official , rather than HCAI. HCAI retains regulatory oversight only over specific architectural licensing standards, operational functionality, and Title 24 accessibility review.

4. HCAI 4: Correctional Treatment Centers

Scope: Inpatient medical, dental, and psychiatric clinics located within California state prisons, youth authorities, or county correctional facilities.

Jurisdictional Authority: Joint regulatory enforcement between HCAI and the California Board of State and Community Corrections (BSCC), addressing both acute medical safety and secure penal custody.

5. HCAI 5: Acute Psychiatric Buildings

Scope: Free-standing 24-hour acute psychiatric inpatient facilities that do not provide acute medical-surgical services.

Jurisdictional Authority: Direct HCAI jurisdiction, with specialized focus on patient suicide prevention (anti-ligature hardware and architectural detailing), environmental behavioral safety, and security.

Testing, Inspection, and Observation (TIO) Program

Under CCR Title 24, Part 1, Chapter 7, Section 7-141, the project architect and structural engineer must author and submit a comprehensive Testing, Inspection, and Observation (TIO) Program as an essential prerequisite for HCAI plan approval. The TIO program functions as the official quality assurance charter for the project, detailing:

Material Testing: Mandated laboratory testing frequencies for high-strength concrete, reinforcing rebar tensile strength, structural steel bolting, and welded connections.

Special Inspections: All required field inspections for seismic tie-downs, non-structural mechanical snubbers, firestopping penetrations, and epoxy anchor proof testing.

Architect & Engineer Observations: Specific construction milestones requiring physical field visits and written structural observation reports by the Architect and Structural Engineer of Record.

Work governed by the TIO program cannot be closed in or covered until the Project Inspector and HCAI Field Compliance Officer (FCO) verify that all specified tests and observations have been successfully logged and approved.

HCAI-Certified Hospital Inspectors of Record (IOR)

All construction on HCAI 1, 2, 4, and 5 facilities requires continuous inspection by an independent, state-certified Hospital Inspector of Record (IOR) . HCAI administers examinations certifying inspectors into three classes:

Class A Inspector: Highest certification; authorized to inspect all facets of healthcare construction (structural framing, MEP systems, architectural finishes, radiological shielding, and seismic anchoring). A Class A inspector is required on all HCAI 1 acute hospital projects.

Class B Inspector: Authorized to inspect light-gauge steel, timber framing, architectural remodels, and HCAI 2 skilled nursing facilities.

Class C Inspector: Specialty trade inspectors (e.g., medical gas piping, electrical distribution, or structural masonry).

Inspector Independence & Reporting Protocols

The Hospital IOR is employed directly by the healthcare facility governing board (never the general contractor). The IOR works under the direct professional guidance of the Architect in General Responsible Charge and maintains concurrent reporting obligations to the HCAI Field Compliance Officer (FCO) . The inspector maintains a continuous daily record, monitors the TIO program, issues notices of non-compliance, and signs off on verified compliance reports.

Seismic Performance Categories: SPC and NPC Framework

Following the 1994 Northridge earthquake—which forced the evacuation of multiple damaged hospital complexes—the California Legislature enacted Senate Bill 1953 (SB 1953) to establish strict seismic performance benchmarks for all existing acute care hospitals. SB 1953 created two parallel rating matrices:

Structural Performance Categories (SPC)

Evaluates the load-bearing framing and lateral resistance of hospital buildings:

SPC-1: High collapse hazard under major seismic motion. Statutorily barred from providing acute inpatient care past established legislative deadlines.

SPC-2: Substantially compliant with life-safety collapse prevention, but may suffer significant structural damage preventing post-earthquake medical operation.

SPC-3, SPC-4, SPC-5: Buildings designed or retrofitted to modern seismic lateral standards capable of providing continuous inpatient care following a maximum credible earthquake. SPC-5 represents modern California Building Code compliance.

Non-Structural Performance Categories (NPC)

Evaluates the seismic anchorage of non-structural components, equipment, and utility lifelines:

NPC-1: Non-structural components are largely unbraced.

NPC-2: Critical anchorage of emergency power generators, main electrical switchgear, communication systems, and central medical gas equipment.

NPC-3: Bracing of overhead fire sprinkler lines, emergency branch piping, and suspended systems in critical care zones.

NPC-4: Comprehensive seismic bracing of all architectural components, ceiling grids, lighting fixtures, HVAC ducting, pharmacy casework, and laboratory equipment throughout the entire hospital.

NPC-5 (The 72-Hour Standard): The pinnacle of hospital resiliency. Requires the hospital to maintain complete 72-hour utility self-sufficiency without any municipal utility grid connections. This encompasses on-site diesel fuel reserves to run emergency generators for 72 hours, on-site potable water storage tanks, on-site wastewater/sewage holding tanks, and redundant emergency communications.

Table: HCAI Facility Levels, Regulatory Oversight, and Technical Standards

Facility Classification Facility Examples Primary Plan Review & Permit AHJ Field Inspection Authority Primary Seismic & Resiliency Mandates

HCAI 1 General Acute Care, Trauma Centers, Surgical Hospitals HCAI (Statewide) Class A Certified Hospital IOR & HCAI FCO Full Alquist Act; SPC-4/5 and NPC-5 (72-hour independent utility self-sufficiency)

HCAI 2 Single-Story Skilled Nursing Facilities (SNFs), ICFs HCAI (Statewide) Class A or B Hospital IOR & HCAI FCO Life safety structural focus; rapid patient egress; backup emergency generation

HCAI 3 Primary Care Clinics, Outpatient Surgery Centers Local Municipal Building Department Local City/County Municipal Building Inspectors California Building Code commercial standards; HCAI functional & accessibility review

HCAI 4 Inpatient Correctional Treatment Centers (Prisons/Jails) HCAI & BSCC (Joint) Class A or B Hospital IOR & HCAI FCO Alquist Act acute care standards balanced with California penal security provisions

HCAI 5 Free-standing Acute Psychiatric Hospitals HCAI (Statewide) Class A or B Hospital IOR & HCAI FCO Anti-ligature detailing, structural safety, environmental patient safety standards

CSE Exam Traps & Practical Takeaways

Trap 1: HCAI 3 Permitting Authority: Candidates routinely miss exam questions by assuming that all licensed healthcare facilities require building permits from HCAI. Primary care and surgical clinics (HCAI 3) obtain their building permits from the local municipal building department (city or county), not HCAI.

Trap 2: Renaming OSHPD to HCAI: In 2021, OSHPD became HCAI. While many practitioners still casually use "OSHPD," exam items refer to HCAI. Candidates must recognize HCAI as the official state agency exercising healthcare jurisdiction.

Trap 3: Life Safety vs. Operability: When asked about the structural performance goal of the Alquist Act, candidates often select "prevent building collapse to preserve life safety." This describes standard commercial building codes (CBC). The Alquist Act explicitly mandates post-earthquake functional operability so that surgery, emergency admissions, and critical patient care continue uninterrupted.

Trap 4: The NPC-5 72-Hour Standard: When designing acute hospital utility infrastructure, remember the 72-hour benchmark. Architects and MEP engineers must allocate physical site space for substantial fuel storage tanks, potable water cisterns, and emergency holding vessels to satisfy NPC-5 requirements.