Study guide

9.1 Azimuths, Bearings, Backbearings, and Deflections

California Civil Engineering Surveying CES

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 California Civil PE Path and Scheduling 1.3 Test Day, References, and Calculators

2 Chapter 2: Civil Engineer Surveying Authority

2.1 Professional Engineers Act: Engineering Surveying 2.2 Civil Engineer vs Professional Land Surveyor Limits 2.3 Board Rules, Accuracy Statements, and Map Act Context

3 Chapter 3: Survey Types and Control

3.1 Control Surveys: Purpose and Procedures 3.2 Alignment and Route Surveys 3.3 Topographic Surveys: Aerial, Surface, and Utilities

4 Chapter 4: Data Collection Methods, Accuracy, and GIS

4.1 Data Collection Methods: Leveling and LiDAR 4.2 Accuracy, Precision, and Error Types 4.3 GIS Applications for Civil Engineering Surveys

5 Chapter 5: Horizontal and Vertical Datums

5.1 Horizontal Datums and Assumed Systems 5.2 Vertical Datums and Benchmarks 5.3 Control Networks and Datum Selection

6 Chapter 6: Field Distances, Angles, and Conflicts

6.1 Measuring Horizontal Distances 6.2 Measuring Angles and Establishing Points 6.3 Construction Conflicts: Utilities, Structures, and Substructures

7 Chapter 7: Field Leveling and Equipment

7.1 Differential Leveling and Level Notes 7.2 Trigonometric Leveling 7.3 Surveying Equipment: Distance, Angle, Elevation

8 Chapter 8: Traverse and Rectangular Coordinates

8.1 Latitudes, Departures, and Coordinates 8.2 Error of Closure 8.3 Traverse Adjustment and Side Shots

9 Chapter 9: Angles, Distances, and Equipment Errors

9.1 Azimuths, Bearings, Backbearings, and Deflections 9.2 Horizontal, Slope, and Vertical Distances 9.3 Equipment Errors and Corrections

10 Chapter 10: Horizontal Curves

10.1 Circular Curve Elements 10.2 Horizontal Curve Stationing and Layout 10.3 Compound and Reverse Curves

11 Chapter 11: Vertical Curves and Line and Grade

11.1 Vertical Curve Geometry and Grades 11.2 High and Low Points and Intermediate Elevations 11.3 Line and Grade from Plans and Profiles

12 Chapter 12: Contours, Offsets, Areas, and Earthwork

12.1 Contours and Cross-Sections 12.2 Offsets and Vertical Interference 12.3 Areas, DMD, and Earthwork Volumes

13 Chapter 13: Mapping

13.1 Interpreting Maps and Plans 13.2 Interpolating Elevations and Plotting Features 13.3 Map Scales and Accuracy Standards

14 Chapter 14: Construction Staking and Cross-Sections

14.1 Stationing and Stake Marking 14.2 Hinge Points, Catch Points, and Grade Breaks 14.3 Slope Staking from Typical Sections

15 Chapter 15: Construction Alignment Layout

15.1 Staking Horizontal Alignment and Curves 15.2 Staking Vertical Alignment and Grades 15.3 Mixed Layout Problems and Exam Strategy

9.1 Azimuths, Bearings, Backbearings, and Deflections

Key Takeaways Explain This Topic AI

US civil practice uses north azimuths: 0° to 360° clockwise from north. Quadrant bearings (N/S θ E/W, θ ≤ 90°) name the same line in different bookkeeping.

Worked conversions: azimuth 218°44′ = S 38°44′ W; N 27°50′ W = azimuth 332°10′; S 41°28′ E = azimuth 138°32′. Convert all four quadrants before latitudes and departures.

Back azimuth = azimuth ± 180°, folded into 0°–360°. Forward 74°22′ backs to 254°22′; forward 291°08′ backs to 111°08′. Backbearing flips both letters and keeps θ.

A deflection is turned right or left from the prolongation of the previous tangent, not from north. Incoming 112°30′ plus 18°45′ R yields outgoing azimuth 131°15′; the same deflection left yields 93°45′.

Magnetic, true, and grid norths are different directions. East magnetic declination is added to a magnetic azimuth: 48°20′ magnetic + 13°15′ E = 61°35′ true. CES is not a PLS astronomy exam.

Last updated: September 2026

9.1 Azimuths, Bearings, Backbearings, and Deflections

Quick Answer: In US civil practice , a north azimuth is the clockwise angle from north , running 0° to 360° . A quadrant bearing is the acute angle from north or south toward east or west (N/S θ E/W). They name the same line. Back azimuth = azimuth ± 180° (fold the result into 0°–360°). A deflection is turned right or left from the prolongation of the previous tangent , not from north.

This section is the office half of CES Domain III item D: calculating horizontal angles as azimuths, bearings, backbearings, and deflections. Chapter 6 covered occupying, backsighting, and turning. Here you convert the bookkeeping so latitudes, departures, and route stationing all use one consistent direction.

The North Convention Used Here

North azimuth, clockwise, 0°–360°. That is ordinary US highway, municipal, and civil-engineering practice, including California engineering-surveying notes on assumed systems and on California Coordinate System of 1983 (CCS83) grid north.

  • 0° = north
  • 90° = east
  • 180° = south
  • 270° = west
  • 360° = north again (do not publish 360°; write 0°00′ )

This is not a south-azimuth system (some older railroad and mining notes), not a counterclockwise mathematical polar angle from the +x axis, and not an interior angle. If a California civil problem says “azimuth” without a qualifier, treat it as a north azimuth .

True north is the geographic meridian. Grid north is the mapped northing axis (CCS83 grid meridians are parallel to the zone’s central meridian, so they match true north only near that meridian). Magnetic north is where a compass points. The Civil Engineering Surveying (CES) exam is not a Professional Land Surveyor (PLS) astronomy exam: you will not compute Laplace corrections or Polaris azimuths. You do need to name which north a given azimuth uses, and you need one short magnetic-declination conversion.

Quadrant Bearings

A bearing in civil notes is a quadrant bearing :

Face north or south (whichever meridian end is nearer).

Turn an angle θ ≤ 90° toward east or west .

Write N θ E , S θ E , S θ W , or N θ W .

Bearings never carry 120°. If you compute 120°, you chose the wrong meridian end. Azimuths never carry a quadrant letter.

  • Quadrant Bearing form Azimuth (north, clockwise)
  • NE N θ E θ
  • SE S θ E 180° − θ
  • SW S θ W 180° + θ
  • NW N θ W 360° − θ
  • Worked Conversions — All Four Quadrants
  • Bearing to azimuth

N 18°42′ E (NE): azimuth = 18°42′ .

S 41°28′ E (SE): azimuth = 180°00′ − 41°28′ = 138°32′ .

S 63°15′ W (SW): azimuth = 180°00′ + 63°15′ = 243°15′ .

N 27°50′ W (NW): azimuth = 360°00′ − 27°50′ = 332°10′ .

Check the NW line: 332°10′ + 27°50′ = 360°00′.

Azimuth to bearing

Bin the azimuth into a 90° quadrant, then peel θ off north or south — never off east or west.

Azimuth 74°22′ (0°–90°, NE): bearing N 74°22′ E .

Azimuth 163°08′ (90°–180°, SE): θ = 180°00′ − 163°08′ = 16°52′ , bearing S 16°52′ E .

Azimuth 218°44′ (180°–270°, SW): θ = 218°44′ − 180°00′ = 38°44′ , bearing S 38°44′ W .

Azimuth 247°35′ (still SW): θ = 247°35′ − 180°00′ = 67°35′ , bearing S 67°35′ W .

Azimuth 304°18′ (270°–360°, NW): θ = 360°00′ − 304°18′ = 55°42′ , bearing N 55°42′ W .

The SW conversion is the one people reverse. Subtracting 218°44′ from 270° gives 51°16′ and a west-based label. Civil bearings are not written that way. Always peel SW azimuths from south (180°).

Back Azimuth and Backbearing

The reverse of a line is 180° from the forward direction.

Back azimuth = azimuth ± 180° , then fold into 0°–360° :

If the forward azimuth is less than 180° , add 180°.

If the forward azimuth is 180° or more , subtract 180°.

Worked numbers:

Forward azimuth AB = 74°22′ → back azimuth BA = 74°22′ + 180°00′ = 254°22′ .

Forward azimuth CD = 291°08′ → back azimuth DC = 291°08′ − 180°00′ = 111°08′ .

Backbearing is the reverse quadrant bearing: flip both letters, keep θ .

Forward N 18°42′ E → back S 18°42′ W (azimuth 18°42′ + 180° = 198°42′, which is S 18°42′ W).

Forward S 41°28′ E → back N 41°28′ W .

Forward S 38°44′ W → back N 38°44′ E .

Forward N 55°42′ W → back S 55°42′ E .

Occupying B and backsighting A, the instrument looks along azimuth BA , not AB. Using the forward azimuth as the backsight orientation is a 180° bust in coordinates — the same class of error as the polar-layout trap in Chapter 6.

Deflection Angles from a Tangent

Route and highway notes often book deflection angles instead of azimuths at every PI.

A deflection is the horizontal angle from the prolongation of the previous course (the tangent you were already on) to the next course, labeled right (R) or left (L) as you look forward along the alignment.

Deflection right increases a north azimuth.

Deflection left decreases a north azimuth (add 360° if the result crosses 0°).

Outgoing azimuth = incoming azimuth + (right deflection) − (left deflection), then fold to 0°–360°.

Worked route example

Incoming azimuth of the tangent is 112°30′ .

Deflect 18°45′ R : outgoing azimuth = 112°30′ + 18°45′ = 131°15′ .

Same incoming, 18°45′ L : outgoing = 112°30′ − 18°45′ = 93°45′ .

Those two next courses are 37°30′ apart (twice the deflection). Right versus left is a different line, not a rounding issue.

Chain two deflections on a simple alignment:

Start azimuth 83°10′ .

Deflect 9°36′ R → 83°10′ + 9°36′ = 92°46′ .

Then deflect 22°18′ L → 92°46′ − 22°18′ = 70°28′ .

Circular-curve layout uses a related idea (the deflection from the tangent at the PC to the PT is Δ/2). That geometry is Chapter 10. In this section, treat a deflection as a route-book angle from a tangent .

Magnetic, True, and Grid — Short Version

Three “norths” appear on California civil jobs:

  • North What it is Typical home
  • True (geodetic) Geographic meridian Geodetic publications
  • Grid CCS83 (or assumed) northing axis Design files and construction
  • Magnetic Compass needle Older deed calls, rough field checks

Magnetic declination is the angle from true north to magnetic north, labeled east or west. In much of California the needle currently points east of true north, but you use the value printed on the source, not a memorized statewide constant.

Mnemonic for azimuths: declination east, magnetic least — a magnetic azimuth is smaller than the true azimuth when declination is east.

  • True azimuth = magnetic azimuth + (east declination)
  • True azimuth = magnetic azimuth − (west declination)

Worked: magnetic azimuth 48°20′ , declination 13°15′ East .

True azimuth = 48°20′ + 13°15′ = 61°35′ .

Grid versus true is convergence (the mapping angle). On a small assumed site you often hold project north and never convert (Chapter 5). On a mapped CCS83 job, published azimuths are usually grid . Do not mix a compass azimuth, a true azimuth, and a grid azimuth in one traverse without converting. That is the whole CES-level lesson; leave geodetic astronomy to the PLS exam.

Exam Traps

South-azimuth habit — subtracting from 180° when the problem is a north azimuth already in the NE quadrant.

SW peel from 270° — azimuth 218°44′ is S 38°44′ W , not a west-based bearing.

Backsight uses forward azimuth — occupy B, backsight A: use azimuth BA .

Deflection from north — a deflection is from the prolongation , not from north. Adding 18°45′ to 0° instead of to 112°30′ is the wrong line.

Compass azimuth treated as grid — convert by declination (and, if the job requires it, convergence) before you compute latitudes.

Loading diagram... North-azimuth bookkeeping: quadrants, back azimuth, and route deflections

Route example: outgoing azimuths from 112°30′ with 18°45′ right vs left