Study guide

7.1 Differential Leveling and Level Notes

California Civil Engineering Surveying CES

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 California Civil PE Path and Scheduling 1.3 Test Day, References, and Calculators

2 Chapter 2: Civil Engineer Surveying Authority

2.1 Professional Engineers Act: Engineering Surveying 2.2 Civil Engineer vs Professional Land Surveyor Limits 2.3 Board Rules, Accuracy Statements, and Map Act Context

3 Chapter 3: Survey Types and Control

3.1 Control Surveys: Purpose and Procedures 3.2 Alignment and Route Surveys 3.3 Topographic Surveys: Aerial, Surface, and Utilities

4 Chapter 4: Data Collection Methods, Accuracy, and GIS

4.1 Data Collection Methods: Leveling and LiDAR 4.2 Accuracy, Precision, and Error Types 4.3 GIS Applications for Civil Engineering Surveys

5 Chapter 5: Horizontal and Vertical Datums

5.1 Horizontal Datums and Assumed Systems 5.2 Vertical Datums and Benchmarks 5.3 Control Networks and Datum Selection

6 Chapter 6: Field Distances, Angles, and Conflicts

6.1 Measuring Horizontal Distances 6.2 Measuring Angles and Establishing Points 6.3 Construction Conflicts: Utilities, Structures, and Substructures

7 Chapter 7: Field Leveling and Equipment

7.1 Differential Leveling and Level Notes 7.2 Trigonometric Leveling 7.3 Surveying Equipment: Distance, Angle, Elevation

8 Chapter 8: Traverse and Rectangular Coordinates

8.1 Latitudes, Departures, and Coordinates 8.2 Error of Closure 8.3 Traverse Adjustment and Side Shots

9 Chapter 9: Angles, Distances, and Equipment Errors

9.1 Azimuths, Bearings, Backbearings, and Deflections 9.2 Horizontal, Slope, and Vertical Distances 9.3 Equipment Errors and Corrections

10 Chapter 10: Horizontal Curves

10.1 Circular Curve Elements 10.2 Horizontal Curve Stationing and Layout 10.3 Compound and Reverse Curves

11 Chapter 11: Vertical Curves and Line and Grade

11.1 Vertical Curve Geometry and Grades 11.2 High and Low Points and Intermediate Elevations 11.3 Line and Grade from Plans and Profiles

12 Chapter 12: Contours, Offsets, Areas, and Earthwork

12.1 Contours and Cross-Sections 12.2 Offsets and Vertical Interference 12.3 Areas, DMD, and Earthwork Volumes

13 Chapter 13: Mapping

13.1 Interpreting Maps and Plans 13.2 Interpolating Elevations and Plotting Features 13.3 Map Scales and Accuracy Standards

14 Chapter 14: Construction Staking and Cross-Sections

14.1 Stationing and Stake Marking 14.2 Hinge Points, Catch Points, and Grade Breaks 14.3 Slope Staking from Typical Sections

15 Chapter 15: Construction Alignment Layout

15.1 Staking Horizontal Alignment and Curves 15.2 Staking Vertical Alignment and Grades 15.3 Mixed Layout Problems and Exam Strategy

7.1 Differential Leveling and Level Notes

Key Takeaways Explain This Topic AI

Height of instrument HI = elevation of the backsight station + backsight rod reading (BS). Elevation of the foresight station = HI − foresight rod reading (FS).

Page arithmetic for the main line is ΣBS − ΣFS = ending elevation − starting elevation. Intermediate foresights (IFS) are computed from HI but are omitted from that sum.

Worked four-setup line: BM A 247.32 → computed BM B 250.24. ΣBS = 21.70, ΣFS = 18.78, both differences = +2.92 ft. Published BM B 250.18 gives a +0.06 ft field misclosure after the page check passes.

If ΣBS − ΣFS does not equal end − start, the notes contain an arithmetic or transcription blunder. A 0.27 ft page-check failure traced to booking TP2 as 251.58 instead of 251.85 (255.32 − 3.47).

Balanced BS and FS lengths cancel curvature and refraction on each setup. At 800 ft the combined effect is only about 0.013 ft; the full C+R formula is developed in Chapter 9.

Last updated: September 2026

7.1 Differential Leveling and Level Notes

Quick Answer: HI = elev_BM + BS and elev = HI − FS . A turning point (TP) is a temporary mark that receives an FS, then a new BS from the next instrument setup. Plus readings are backsights; minus readings are foresights. Create the notes that way, then check them: ΣBS − ΣFS = end − start for the main line. If that identity fails, you have a book blunder, not a field misclosure.

This section is the field half of CES Domain II items B and D : locating or establishing an elevation by differential leveling , and creating and checking level notes . Trigonometric leveling is §7.2. Equipment selection is §7.3. Office closure, allowable error formulas, and the full curvature/refraction correction live with Domain III in later chapters — here you learn what must be true in the book before you leave the job.

Two different quantities share similar names. In this section HI means height of instrument : the elevation of the line of sight , in feet on the project vertical datum. It is not the 5-ft tape measurement from a hub to a total-station trunnion ( h.i. in §7.2).

The HI Method (Plus and Minus)

A level (automatic, dumpy, or digital) sets a horizontal line of sight. A level rod held on a point of known or unknown elevation intercepts that line. The intercept is a rod reading .

Backsight (BS, plus): rod reading on a point whose elevation is already held. Adding it raises you from the mark up to the line of sight.

Foresight (FS, minus): rod reading on a point whose elevation you want. Subtracting it drops you from the line of sight down to that mark.

  • HI = elev_known + BS
  • elev_new = HI − FS

If BS > FS on that setup, the new point is higher than the old one (a rise ). If FS > BS, it is a fall . The rise-and-fall (plus-minus) column is the same arithmetic without writing HI: rise/fall = BS − FS for each turning setup, and the algebraic sum of those rises and falls must equal end − start.

A turning point is any solid, well-defined temporary mark (a TP pin, a chiseled square, a hub with a tack, a fire hydrant flange) that can hold a rod while you move the instrument. It gets an FS from the current setup and a BS from the next setup. A point that gets only an FS — a catch basin invert, a finished-floor hub, a grate — is an intermediate foresight (IFS) . Compute IFS elevations from the current HI; do not put IFS values in ΣFS of the main-line page check, because they never receive a matching BS.

  • Term What it is Sign in the book
  • BS (plus) Rod on a known (or already carried) elevation Added to elevation to get HI
  • HI Elevation of the horizontal line of sight BS + elev of the occupied back point
  • FS (minus) Rod on a TP or closing benchmark Subtracted from HI
  • IFS (minus) Rod on a side shot from the same HI Subtracted from HI; omitted from ΣFS
  • TP Temporary point that carries the line Receives FS, then BS
  • Creating a Full Note Page (Four Setups)

Run a spur from BM A (published elevation 247.32 ft ) to BM B (published elevation 250.18 ft ) to check a pad. Four instrument setups, turning points TP1–TP3, plus one intermediate shot to a catch-basin invert from the second HI.

Setup 1 — rod on BM A, then on TP1:

  • HI₁ = 247.32 + 5.26 = 252.58
  • Elev TP1 = 252.58 − 3.67 = 248.91

Setup 2 — rod on TP1, then on TP2:

  • HI₂ = 248.91 + 6.41 = 255.32
  • Elev TP2 = 255.32 − 3.47 = 251.85
  • IFS to CB-12 = 255.32 − 6.88 = 248.44 (not a TP)

Setup 3 — rod on TP2, then on TP3:

  • HI₃ = 251.85 + 4.88 = 256.73
  • Elev TP3 = 256.73 − 6.02 = 250.71

Setup 4 — rod on TP3, then on BM B:

  • HI₄ = 250.71 + 5.15 = 255.86
  • Elev BM B (computed) = 255.86 − 5.62 = 250.24
  • Station BS (+) HI FS (−) IFS (−) Elevation
  • BM A 5.26 252.58 — — 247.32
  • TP1 6.41 255.32 3.67 — 248.91
  • CB-12 — — — 6.88 248.44
  • TP2 4.88 256.73 3.47 — 251.85
  • TP3 5.15 255.86 6.02 — 250.71
  • BM B — — 5.62 — 250.24
  • Checking the Notes — Page Arithmetic First
  • Main-line backsights: 5.26 + 6.41 + 4.88 + 5.15 = 21.70
  • Main-line foresights (TPs and BM B only): 3.67 + 3.47 + 6.02 + 5.62 = 18.78
  • ΣBS − ΣFS = 21.70 − 18.78 = 2.92
  • End − start = 250.24 − 247.32 = 2.92

The identity holds, so the HI arithmetic is internally consistent. The IFS 6.88 was correctly left out of ΣFS; including it would have broken a page that is actually right.

Rise-and-fall check (same four turning setups):

  • Setup BS − FS Rise (+) or fall (−)
  • 1 5.26 − 3.67 +1.59
  • 2 6.41 − 3.47 +2.94
  • 3 4.88 − 6.02 −1.14
  • 4 5.15 − 5.62 −0.47

Net = 1.59 + 2.94 − 1.14 − 0.47 = +2.92 ft , matching both the page check and end − start.

Field Misclosure versus a Book Blunder

Published BM B is 250.18 . Computed is 250.24 .

Misclosure = 250.24 − 250.18 = +0.06 ft (the line came out high).

That 0.06 ft is not an arithmetic error: the page already checks. It is a field discrepancy — rod reading, turning-point settlement, unbalanced sights, or a published elevation that does not match the monument you occupied. On a closed loop you would finish on BM A and compare the computed re-elevation of A with 247.32; a perfect loop still uses the same page identity (end − start should be 0 after you close, and ΣBS should equal ΣFS).

Do not treat 0.06 ft as a Board-published CES tolerance. Compare it with the project specification you adopted in planning (Domain I.E). As a numeric illustration only, a common construction form is 0.05√N feet with N = number of setups: 0.05 × √4 = 0.10 ft . The 0.06 ft field misclosure would pass that example spec; a 0.21 ft loop would not, and you would rerun before staking grade.

Finding an Arithmetic Blunder

Suppose the same rod readings were booked, but TP2’s elevation was written 251.58 instead of 251.85 (a swapped 8 and 5 after a sloppy subtraction of 3.47 from 255.32). If the notekeeper then carried HI from that wrong elevation:

  • HI₃ = 251.58 + 4.88 = 256.46
  • Elev TP3 = 256.46 − 6.02 = 250.44
  • HI₄ = 250.44 + 5.15 = 255.59
  • Elev BM B = 255.59 − 5.62 = 249.97

Now end − start = 249.97 − 247.32 = 2.65 ft , while ΣBS − ΣFS is still 2.92 ft (the BS and FS columns were not changed). Discrepancy = 0.27 ft. That is the signature of a book blunder . Field misclosure against 250.18 is meaningless until the page identity holds.

Hunt line by line: recompute HI = previous elev + BS and elev = HI − FS . Setups 1 and the first half of setup 2 still produce TP2 = 251.85 . The book’s 251.58 is the first disagreement, and 251.85 − 251.58 = 0.27 ft , the same amount as the page-check failure. Correct TP2, recompute downstream, and only then look at published BM B.

Three-Wire Leveling (Precision Method)

On control-quality runs, read the upper, middle, and lower stadia wires on a Philadelphia rod. The elevation reading is the mean of the three (or the middle after a check). The mean of the upper and lower must match the middle within the rod’s least count; a mismatch is a reading blunder caught before it enters the HI column.

Example: upper 5.426 , middle 5.218 , lower 5.010 .

(5.426 + 5.010) / 2 = 5.218 — the middle agrees exactly.

Stadia interval = 5.426 − 5.010 = 0.416 . With stadia constant 100, sight length ≈ 41.6 ft . Short, nearly equal BS and FS lengths are what you want for hundredths. Three-wire does not replace the page check; it improves the readings that go into the page.

Curvature and Refraction — Field Awareness

A compensator (or vial) sets a horizontal line . A level surface follows Earth curvature, so on a long foresight the rod is slightly “too tall”: the reading is large and the computed elevation of that point is slightly low . Atmospheric refraction bends the line of sight downward and cancels about one-seventh of the curvature. The combined effect (C+R) is still a small, too-large rod reading.

Tiny illustration (formula and sign conventions are developed in Chapter 9): at 800 ft , combined C+R is about 0.013 ft ; at 1,000 ft , about 0.021 ft . On a 40-ft three-wire sight it is in the thousandths. Balancing each setup’s BS and FS lengths makes the two effects nearly equal, so they cancel in the elevation difference. Unbalanced long foresights are how C+R leaks into a loop that otherwise looks careful.

Exam Traps

Adding FS — elev = HI + FS is the inverted-rod case for an overhead point, not a ground TP.

Putting IFS in ΣFS — the page check then fails on a correct line.

Calling a failed page check a loop misclosure — fix the book first; only a checking page can be compared with a published BM.

HI versus h.i. — leveling HI is an elevation; the 5.28 ft tape to a total station is §7.2.

Loading diagram... Differential leveling: plus backsights, minus foresights, page check

Rise and fall by setup on the four-setup BM A to BM B line (feet)