Study guide

7.2 Trigonometric Leveling

California Civil Engineering Surveying CES

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 California Civil PE Path and Scheduling 1.3 Test Day, References, and Calculators

2 Chapter 2: Civil Engineer Surveying Authority

2.1 Professional Engineers Act: Engineering Surveying 2.2 Civil Engineer vs Professional Land Surveyor Limits 2.3 Board Rules, Accuracy Statements, and Map Act Context

3 Chapter 3: Survey Types and Control

3.1 Control Surveys: Purpose and Procedures 3.2 Alignment and Route Surveys 3.3 Topographic Surveys: Aerial, Surface, and Utilities

4 Chapter 4: Data Collection Methods, Accuracy, and GIS

4.1 Data Collection Methods: Leveling and LiDAR 4.2 Accuracy, Precision, and Error Types 4.3 GIS Applications for Civil Engineering Surveys

5 Chapter 5: Horizontal and Vertical Datums

5.1 Horizontal Datums and Assumed Systems 5.2 Vertical Datums and Benchmarks 5.3 Control Networks and Datum Selection

6 Chapter 6: Field Distances, Angles, and Conflicts

6.1 Measuring Horizontal Distances 6.2 Measuring Angles and Establishing Points 6.3 Construction Conflicts: Utilities, Structures, and Substructures

7 Chapter 7: Field Leveling and Equipment

7.1 Differential Leveling and Level Notes 7.2 Trigonometric Leveling 7.3 Surveying Equipment: Distance, Angle, Elevation

8 Chapter 8: Traverse and Rectangular Coordinates

8.1 Latitudes, Departures, and Coordinates 8.2 Error of Closure 8.3 Traverse Adjustment and Side Shots

9 Chapter 9: Angles, Distances, and Equipment Errors

9.1 Azimuths, Bearings, Backbearings, and Deflections 9.2 Horizontal, Slope, and Vertical Distances 9.3 Equipment Errors and Corrections

10 Chapter 10: Horizontal Curves

10.1 Circular Curve Elements 10.2 Horizontal Curve Stationing and Layout 10.3 Compound and Reverse Curves

11 Chapter 11: Vertical Curves and Line and Grade

11.1 Vertical Curve Geometry and Grades 11.2 High and Low Points and Intermediate Elevations 11.3 Line and Grade from Plans and Profiles

12 Chapter 12: Contours, Offsets, Areas, and Earthwork

12.1 Contours and Cross-Sections 12.2 Offsets and Vertical Interference 12.3 Areas, DMD, and Earthwork Volumes

13 Chapter 13: Mapping

13.1 Interpreting Maps and Plans 13.2 Interpolating Elevations and Plotting Features 13.3 Map Scales and Accuracy Standards

14 Chapter 14: Construction Staking and Cross-Sections

14.1 Stationing and Stake Marking 14.2 Hinge Points, Catch Points, and Grade Breaks 14.3 Slope Staking from Typical Sections

15 Chapter 15: Construction Alignment Layout

15.1 Staking Horizontal Alignment and Curves 15.2 Staking Vertical Alignment and Grades 15.3 Mixed Layout Problems and Exam Strategy

7.2 Trigonometric Leveling

Key Takeaways Explain This Topic AI

With zenith angle Z (0° at the zenith), vertical distance along the line of sight is VD = SD × cos(Z). Target elevation = elev of the instrument mark + h.i. + SD × cos(Z) − h.t.

The horizon form is equivalent: VA = 90° − Z and VD = SD × sin(VA) = HD × tan(VA), with HD = SD × sin(Z). Mixing zenith and horizon functions swaps VD with HD.

Worked one-way: mark 520.00 ft, h.i. = 5.28 ft, SD = 412.50 ft, Z = 82°15′30″, h.t. = 4.85 ft → VD = +55.57 ft → target mark 576.00 ft.

Worked depression: mark 318.75 ft, h.i. = 5.12 ft, SD = 287.40 ft, Z = 96°40′00″, h.t. = 6.00 ft → VD = −33.37 ft → target 284.50 ft. Cosine of Z > 90° is negative; do not drop the sign.

Reciprocal observations (A to B and B to A, then mean the two mark-to-mark differences) cancel most curvature and refraction on long sights. Use a level, not trig heights, when the job is a 0.01 ft pad with room for balanced setups.

Last updated: September 2026

7.2 Trigonometric Leveling

Quick Answer: Elev_target = elev_inst + h.i. + SD × cos(Z) − h.t. , where Z is the zenith angle . The same vertical distance is SD × sin(VA) or HD × tan(VA) if VA is the vertical angle from the horizon ( VA = 90° − Z ). Reciprocal observations (both directions) cancel most curvature and refraction. Use trig heights on steep slopes, towers, and canyons; use a level when you can balance short sights and you need hundredths.

CES Domain II item B names trigonometric and differential leveling together. Differential leveling (§7.1) is the default elevation method. Trigonometric leveling is what a total station (or a theodolite plus EDM) does whenever the line of sight is not horizontal: you measure slope distance (SD) and a vertical pointing, reduce vertical distance (VD) , then move from mark to mark with two tape heights.

Disambiguate names before you hit the calculator:

elev_inst — elevation of the station mark under the instrument (hub, monument, TP), not the elevation of the telescope.

h.i. — measured height from that mark up to the trunnion / horizontal axis . Typical values are 5.0–5.5 ft. This is not leveling HI (elevation of a horizontal line of sight).

h.t. — height of the target (prism, tape mark, or rod reading) above the target station mark.

Z — zenith angle, 0° straight up , 90° on the horizon , > 90° looking down. Same convention as Chapter 6.

Zenith Form

Along the line of sight:

  • VD = SD × cos(Z)
  • HD = SD × sin(Z) (needed only if you use the tan form below)

Then:

Elev_target = elev_inst + h.i. + VD − h.t.

Elev_target = elev_inst + h.i. + SD × cos(Z) − h.t.

Limits that catch a swapped sine/cosine: Z = 90° → cos(90°) = 0 → VD = 0 (purely horizontal). Z = 0° → VD = SD (looking at the zenith). When Z > 90° , cos(Z) is negative , so VD is negative and the target mark is below the trunnion; keep the sign instead of taking an absolute value and guessing “up or down.”

Horizon Form (Vertical Angle from the Horizon)

Some notes, theodolites, and clinometers store VA with 0° on the horizon , positive up, negative down.

  • VA = 90° − Z
  • VD = SD × sin(VA)
  • VD = HD × tan(VA)

Elev_target = elev_inst + h.i. + SD × sin(VA) − h.t.

sin(VA) = cos(Z) on the same pointing, so both forms agree. Feeding a zenith reading into sin(VA) or a horizon VA into cos(Z) returns something close to HD , which is the classic CES trap.

  • Convention Zero VD When you see it
  • Zenith Z Straight up SD × cos(Z) Total station display
  • Horizon VA Horizon SD × sin(VA) = HD × tan(VA) Theodolite, clinometer, older books
  • Worked Example 1 — One-Way, Looking Up

Instrument over mark A, elev_A = 520.00 ft .

h.i. = 5.28 ft . Prism over mark B, h.t. = 4.85 ft .

SD = 412.50 ft . Z = 82°15′30″ .

  • 82°15′30″ = 82 + 15/60 + 30/3600 = 82.258333°
  • cos(82.258333°) = 0.134707
  • VD = 412.50 × 0.134707 = 55.57 ft (rounded to hundredths)

Horizon check: VA = 90° − 82.258333° = 7.741667° = 7°44′30″.

SD × sin(7.741667°) = 55.57 ft .

HD = 412.50 × sin(82.258333°) = 408.74 ft , and HD × tan(7.741667°) = 55.57 ft .

Elev_B = 520.00 + 5.28 + 55.57 − 4.85 = 576.00 ft.

Stack: 520.00 + 5.28 = 525.28 (elevation of the trunnion). 525.28 + 55.57 = 580.85 (elevation of the prism). 580.85 − 4.85 = 576.00 (mark B). Forgetting h.t. leaves you 4.85 ft high; forgetting h.i. leaves you 5.28 ft low. Using SD × sin(Z) as VD would give HD = 408.74 and a nonsense elevation near 929 ft.

At 412 ft, combined curvature and refraction is only about 0.0035 ft — smaller than a hundredth. Reciprocal observations are not what saves this short hillside shot; h.i. , h.t. , and the correct cosine are.

Worked Example 2 — One-Way, Looking Down (Z > 90°)

Instrument over mark C, elev_C = 318.75 ft . h.i. = 5.12 ft .

Prism over a streambed hub, h.t. = 6.00 ft . SD = 287.40 ft . Z = 96°40′00″ = 96.666667°.

  • cos(96.666667°) = −0.116092
  • VD = 287.40 × (−0.116092) = −33.37 ft

Elev_hub = 318.75 + 5.12 + (−33.37) − 6.00 = 284.50 ft.

Equivalent VA = 90° − 96.666667° = −6.666667° (depression). SD × sin(−6.666667°) = −33.37 ft . Taking the absolute value of VD and adding it because “the river is downhill” would put the hub at 318.75 + 5.12 + 33.37 − 6.00 = 351.24 ft — above the instrument, the wrong valley.

Worked Example 3 — Reciprocal Observations (Brief)

C+R and unmodeled refraction grow with distance squared . Across a canyon you cannot balance 40-ft level sights, so you occupy both ends.

Marks A and B, elev_A = 210.00 ft , SD = 3,850 ft , h.i. = h.t. = 5.40 ft (heights cancel in each one-way Δh).

A → B: Z = 88°12′00″.

VD_AB = 3,850 × cos(88.20°) = +120.93 ft .

One-way elev_B = 210.00 + 120.93 = 330.93 ft .

B → A (same day, similar atmosphere): Z = 91°48′20″.

VD_BA = 3,850 × cos(91.805556°) = −121.30 ft .

That is the height of A minus the height of B from B’s pointing, so the implied Δh_AB = +121.30 ft .

One-way elev_B from this pointing = 210.00 + 121.30 = 331.30 ft .

Mean Δh_AB = (120.93 + 121.30) / 2 = 121.115 → 121.12 ft.

Elev_B (reciprocal) = 210.00 + 121.12 = 331.12 ft.

The two one-ways differ by 0.37 ft . Combined C+R at 3,850 ft is about 0.31 ft (Chapter 9 develops 0.574 M² with M in miles: 3,850/5,280 ≈ 0.729 mi). Reciprocal averaging removes most of that systematic bend; a single long one-way does not. Heights that do not cancel (different h.i. and h.t. on the two occupations) stay in each one-way reduction and must still be taped carefully.

When Trig Leveling versus a Level

  • Situation Prefer
  • Pad, invert, or finished floor to 0.01 ft , with room to turn Automatic or digital level , balanced BS/FS
  • Steep hillside where a level would need a dozen short setups Trig heights from a total station

Top of a tower, bridge soffit, overhead pipe Trig, or an inverted rod on a level if the sight is short and nearly horizontal

  • River or canyon with no turning points Reciprocal trig heights
  • Dense topo shots on a surface Total-station trig or GNSS RTK (§7.3), not a level loop to every shot

A 3-minute vertical circle used as a “level replacement” over a 200 ft pad shot is the wrong tool; that geometry is in §7.3. Trig leveling is not sloppy leveling — it is a different measurement model. It still needs a checked vertical circle, a prism constant that matches the software, and h.i./h.t. measured to the same hundredth you want in the elevation.

Exam Traps

Sine on a zenith angle — SD × sin(Z) is HD, not VD.

Dropping the sign when Z > 90° — cosine is negative; the target is below the trunnion.

Skipping h.i. or h.t. — a 5 ft tape error is 500 times a 0.01 ft spec.

Calling leveling HI and total-station h.i. the same number — one is an elevation, the other is a 5-ft offset.

Loading diagram... Trigonometric leveling: zenith or horizon VD, then h.i. and h.t.

Canyon example: one-way elevations of B versus reciprocal mean (feet)