Study guide
10.1 Circular Curve Elements
California Civil Engineering Surveying CES
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 California Civil PE Path and Scheduling 1.3 Test Day, References, and Calculators
2 Chapter 2: Civil Engineer Surveying Authority
2.1 Professional Engineers Act: Engineering Surveying 2.2 Civil Engineer vs Professional Land Surveyor Limits 2.3 Board Rules, Accuracy Statements, and Map Act Context
3 Chapter 3: Survey Types and Control
3.1 Control Surveys: Purpose and Procedures 3.2 Alignment and Route Surveys 3.3 Topographic Surveys: Aerial, Surface, and Utilities
4 Chapter 4: Data Collection Methods, Accuracy, and GIS
4.1 Data Collection Methods: Leveling and LiDAR 4.2 Accuracy, Precision, and Error Types 4.3 GIS Applications for Civil Engineering Surveys
5 Chapter 5: Horizontal and Vertical Datums
5.1 Horizontal Datums and Assumed Systems 5.2 Vertical Datums and Benchmarks 5.3 Control Networks and Datum Selection
6 Chapter 6: Field Distances, Angles, and Conflicts
6.1 Measuring Horizontal Distances 6.2 Measuring Angles and Establishing Points 6.3 Construction Conflicts: Utilities, Structures, and Substructures
7 Chapter 7: Field Leveling and Equipment
7.1 Differential Leveling and Level Notes 7.2 Trigonometric Leveling 7.3 Surveying Equipment: Distance, Angle, Elevation
8 Chapter 8: Traverse and Rectangular Coordinates
8.1 Latitudes, Departures, and Coordinates 8.2 Error of Closure 8.3 Traverse Adjustment and Side Shots
9 Chapter 9: Angles, Distances, and Equipment Errors
9.1 Azimuths, Bearings, Backbearings, and Deflections 9.2 Horizontal, Slope, and Vertical Distances 9.3 Equipment Errors and Corrections
10 Chapter 10: Horizontal Curves
10.1 Circular Curve Elements 10.2 Horizontal Curve Stationing and Layout 10.3 Compound and Reverse Curves
11 Chapter 11: Vertical Curves and Line and Grade
11.1 Vertical Curve Geometry and Grades 11.2 High and Low Points and Intermediate Elevations 11.3 Line and Grade from Plans and Profiles
12 Chapter 12: Contours, Offsets, Areas, and Earthwork
12.1 Contours and Cross-Sections 12.2 Offsets and Vertical Interference 12.3 Areas, DMD, and Earthwork Volumes
13 Chapter 13: Mapping
13.1 Interpreting Maps and Plans 13.2 Interpolating Elevations and Plotting Features 13.3 Map Scales and Accuracy Standards
14 Chapter 14: Construction Staking and Cross-Sections
14.1 Stationing and Stake Marking 14.2 Hinge Points, Catch Points, and Grade Breaks 14.3 Slope Staking from Typical Sections
15 Chapter 15: Construction Alignment Layout
15.1 Staking Horizontal Alignment and Curves 15.2 Staking Vertical Alignment and Grades 15.3 Mixed Layout Problems and Exam Strategy
10.1 Circular Curve Elements
Key Takeaways Explain This Topic AI
US highway and Caltrans street/highway work use the arc definition D = 5729.58/R, the central angle subtended by a 100 ft arc; railroads use the chord definition R = 50/sin(D_c/2).
For R = 800 ft and Δ = 36°00', T = 259.94 ft, L = 502.65 ft, LC = 494.43 ft, M = 39.15 ft, and E = 41.17 ft.
Tangent length is T = R tan(Δ/2); given T and Δ, invert as R = T / tan(Δ/2).
Curve length is L = R Δ π/180 = 100 Δ/D; Δ is in radians only in R Δ, and in degrees in 100 Δ/D.
External E is PI to the arc midpoint; middle ordinate M is the long-chord midpoint to the arc; E is always larger than M on the same simple curve.
Last updated: September 2026
Horizontal circular curves turn a route alignment from one tangent to the next so the finished centerline does not kink where those tangents meet. Domain III.E of the 2022 Civil Engineering Surveying (CES) test plan from the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) asks you to calculate radius, curve length, and tangent length, then extend the same elements into compound and reverse geometry. This section is the simple-curve toolkit those later geometries reuse. California street, highway, and most civil site alignments use a simple circular curve —constant radius—between two tangents.
- Circular-curve geometry
- Why the PI is off the centerline
The incoming and outgoing tangents, extended, meet at the point of intersection (PI) . Construction never occupies the PI. The curve is a circular arc of radius R about center O . The arc starts at the point of curvature (PC) , where radius OPC is perpendicular to the back tangent, and ends at the point of tangency (PT) , where radius OPT is perpendicular to the forward tangent. The central angle at O between those radii is the intersection angle Δ (delta). That same Δ is the deflection between the two tangents.
Degree of curve: arc definition vs chord definition
Sharpness is often stated as degree of curve D instead of R.
Arc definition (US highway, Caltrans, typical California civil work): D is the central angle in degrees subtended by 100 ft of arc :
D = 5729.58 / R , with R in feet.
The constant is 18,000/π rounded to 5729.58. Inverse: R = 5729.58 / D .
Chord definition (railroad and some older transit practice): D_c is the central angle subtended by a 100-ft chord :
R = 50 / sin(D_c / 2) .
California highway and street problems on CES use the arc definition . Use the chord definition only when the stem is clearly railroad or it specifies a 100-ft chord. Do not mix definitions in one solution.
With arc D known, arc length is the 100-ft proportion L = 100 Δ / D (Δ and D in degrees). That identity is the same as L = R Δ_rad = R Δ π / 180 .
- Definition Who uses it Formula What 100 ft means
- Arc (highway) Caltrans, US highways, typical CA streets D = 5729.58 / R 100 ft of arc subtends D°
- Chord (railroad) Rail alignments, some older transit R = 50 / sin(D_c / 2) 100-ft chord subtends D_c°
- Formulas for the six elements
Keep Δ in degrees for the trig of Δ/2, and convert to radians only inside L = R Δ_rad. CES lets you bring two handheld calculators; a degree/radian mode error is a full miss.
- Element Symbol Formula What you measure
- Tangent length T R tan(Δ/2) PC to PI along the back tangent, and PT to PI along the forward tangent
- Curve length L R Δ π/180 = 100 Δ/D Arc length along the centerline from PC to PT
- Long chord LC 2 R sin(Δ/2) Straight-line chord from PC to PT
- Middle ordinate M R (1 − cos(Δ/2)) Offset from the midpoint of LC out to the arc
- External E R (1/cos(Δ/2) − 1) Distance from the PI in to the midpoint of the arc
- Degree of curve (arc) D 5729.58 / R Central angle subtended by 100 ft of arc
T is a tangent distance, not an arc. LC is always shorter than L. E is always larger than M on the same simple curve.
Worked complete set: R = 800 ft, Δ = 36°00'
Δ/2 = 18°00'. Calculator in degrees.
- tan 18° = 0.3249197, so T = 800 × 0.3249197 = 259.94 ft
- L = 800 × 36 × π / 180 = 160π = 502.65 ft
- sin 18° = 0.3090170, so LC = 1,600 × 0.3090170 = 494.43 ft
- cos 18° = 0.9510565, so M = 800 (1 − 0.9510565) = 39.15 ft
- E = 800 (1/0.9510565 − 1) = 800 × 0.0514622 = 41.17 ft
Arc degree of curve: D = 5729.58 / 800 = 7.162° .
Check with the 100-ft rule: L = 100 × 36 / 7.162 = 502.65 ft (matches).
Railroad chord-definition D_c for the same 800-ft radius: sin(D_c/2) = 50/800 = 0.0625, so D_c/2 = 3.5833° and D_c = 7.167° . On this flat curve the two D values differ by only 0.005°, but they are still different definitions. A California highway alignment with R = 800 ft is D = 7.162° , not 7.167°. Using the railroad D in L = 100 Δ/D is the wrong constant for Caltrans-style highway work.
Checks that catch arithmetic errors: LC (494.43 ft) < L (502.65 ft); E (41.17 ft) > M (39.15 ft); T (259.94 ft) is longer than E, as it must be, because T runs all the way to the PI while E is the short external from the PI to the curve.
Inverse: given T and Δ, find R
T = R tan(Δ/2) rearranges to R = T / tan(Δ/2) .
Worked inverse: T = 320.00 ft , Δ = 40°00' .
Δ/2 = 20°00', tan 20° = 0.3639702. R = 320.00 / 0.3639702 = 879.19 ft .
Then L = 879.19 × 40 × π / 180 = 613.79 ft , and D = 5729.58 / 879.19 = 6.517° . If a stem gives T and R instead, Δ = 2 arctan(T/R). If it gives L and R, Δ° = 180 L / (π R). If it gives L and arc D, Δ = L D / 100.
Exam traps on simple-curve elements
Radian mode. tan(18) in radians is not tan 18°.
L = R Δ with Δ left in degrees. 800 × 36 = 28,800 ft is not a curve length.
Chord D on a highway radius. Streets and Caltrans highway alignments use D = 5729.58 / R.
Swapping M and E. M is from the long chord; E is from the PI.
Calling T the stationing distance from PC to PT. Stationing uses L.
A stem that gives the long chord and Δ still inverts LC = 2 R sin(Δ/2) for R, then L = R Δ π/180. This section's complete set starts from R and Δ (and the inverse from T and Δ) so you compute the elements rather than reuse a retired numeric stem.