Study guide
10.2 Horizontal Curve Stationing and Layout
California Civil Engineering Surveying CES
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 California Civil PE Path and Scheduling 1.3 Test Day, References, and Calculators
2 Chapter 2: Civil Engineer Surveying Authority
2.1 Professional Engineers Act: Engineering Surveying 2.2 Civil Engineer vs Professional Land Surveyor Limits 2.3 Board Rules, Accuracy Statements, and Map Act Context
3 Chapter 3: Survey Types and Control
3.1 Control Surveys: Purpose and Procedures 3.2 Alignment and Route Surveys 3.3 Topographic Surveys: Aerial, Surface, and Utilities
4 Chapter 4: Data Collection Methods, Accuracy, and GIS
4.1 Data Collection Methods: Leveling and LiDAR 4.2 Accuracy, Precision, and Error Types 4.3 GIS Applications for Civil Engineering Surveys
5 Chapter 5: Horizontal and Vertical Datums
5.1 Horizontal Datums and Assumed Systems 5.2 Vertical Datums and Benchmarks 5.3 Control Networks and Datum Selection
6 Chapter 6: Field Distances, Angles, and Conflicts
6.1 Measuring Horizontal Distances 6.2 Measuring Angles and Establishing Points 6.3 Construction Conflicts: Utilities, Structures, and Substructures
7 Chapter 7: Field Leveling and Equipment
7.1 Differential Leveling and Level Notes 7.2 Trigonometric Leveling 7.3 Surveying Equipment: Distance, Angle, Elevation
8 Chapter 8: Traverse and Rectangular Coordinates
8.1 Latitudes, Departures, and Coordinates 8.2 Error of Closure 8.3 Traverse Adjustment and Side Shots
9 Chapter 9: Angles, Distances, and Equipment Errors
9.1 Azimuths, Bearings, Backbearings, and Deflections 9.2 Horizontal, Slope, and Vertical Distances 9.3 Equipment Errors and Corrections
10 Chapter 10: Horizontal Curves
10.1 Circular Curve Elements 10.2 Horizontal Curve Stationing and Layout 10.3 Compound and Reverse Curves
11 Chapter 11: Vertical Curves and Line and Grade
11.1 Vertical Curve Geometry and Grades 11.2 High and Low Points and Intermediate Elevations 11.3 Line and Grade from Plans and Profiles
12 Chapter 12: Contours, Offsets, Areas, and Earthwork
12.1 Contours and Cross-Sections 12.2 Offsets and Vertical Interference 12.3 Areas, DMD, and Earthwork Volumes
13 Chapter 13: Mapping
13.1 Interpreting Maps and Plans 13.2 Interpolating Elevations and Plotting Features 13.3 Map Scales and Accuracy Standards
14 Chapter 14: Construction Staking and Cross-Sections
14.1 Stationing and Stake Marking 14.2 Hinge Points, Catch Points, and Grade Breaks 14.3 Slope Staking from Typical Sections
15 Chapter 15: Construction Alignment Layout
15.1 Staking Horizontal Alignment and Curves 15.2 Staking Vertical Alignment and Grades 15.3 Mixed Layout Problems and Exam Strategy
10.2 Horizontal Curve Stationing and Layout
Key Takeaways Explain This Topic AI
Centerline stationing uses PC = PI − T and PT = PC + L; PT = PI + T is a tangent distance off the curve, not a station.
With PI at 45+00.00, T = 250.00 ft, and L = 480.00 ft, PC = 42+50.00 and PT = 47+30.00.
A point 120 ft along that curve from the PC is station 43+70.00, with deflection 4.942° (4°56'32") and chord 119.85 ft from the PC.
Deflection from the PC is δ = ℓ/(2R) radians = (ℓ/L)(Δ/2) = ℓ D/200 degrees using arc-definition D.
Stations are 100-ft chainage (10+00 = 1,000 ft); recover R = 695.60 ft and Δ = 39.537° from T and L when the stem omits them.
Last updated: September 2026
Stationing is chainage along the finished alignment centerline: 100 ft of centerline is one full station. Station 10+00 is 1,000 ft from 0+00; station 45+00 is 4,500.00 ft. Horizontal-curve layout on the Civil Engineering Surveying (CES) exam is almost always this sequence: given a PI station plus T and L (or enough data to compute them), find the PC and PT stations, then station a point at a given arc length and compute the deflection angle used to stake it. Domain III.E supplies the geometry; Domain V later occupies the same points with hubs and tacks.
- Centerline stations from the PI
- PC and PT from the PI
The PI is where the tangents meet. It is not on the curve and it is not a stationing checkpoint between PC and PT. Centerline stationing runs along the back tangent to the PC, then along the arc of length L, then along the forward tangent from the PT.
- PC station = PI station − T
- PT station = PC station + L
You subtract T because you occupy the back tangent from the PI back to the PC. You add L, not T, because the occupied centerline between PC and PT is the arc. A standing trap is writing PT = PI + T. That is a tangent distance from the PI to a point that is not on the curve; it is not a centerline station.
A useful check after you have PC and PT: PT − PI = L − T, which is not equal to T unless L = 2T (a special Δ, not the general case).
Worked stationing: PI 45+00, T = 250.00 ft, L = 480.00 ft
PI = 45+00.00 means 4,500.00 ft along the alignment.
- PC = 4,500.00 − 250.00 = 4,250.00 = 42+50.00
- PT = 4,250.00 + 480.00 = 4,730.00 = 47+30.00
Checks: T = 2+50.00 of station; L = 4+80.00 of station. PI − PC = 2+50.00, which equals T. PT − PC = 4+80.00, which equals L. PT − PI = 2+30.00, which is not T. That 230 ft equals L − T = 480 − 250. You can remember PT = PI + (L − T) as a check, but on exam day compute PC first, then add L.
Station of a point 120 ft along the curve
Arc length ℓ is measured from the PC along the curve, never from the PI.
Point station = PC + ℓ = 4,250.00 + 120.00 = 4,370.00 = 43+70.00
The point is still 360 ft of arc short of the PT (480 − 120). If the stem asks for a point "120 ft before the PT," that station is PT − 120 = 46+10.00, which is a different point (ℓ = 360 ft). Read whether 120 ft is from the PC, from the PT, or along a tangent.
Deflection angle and chord from the PC
Field layout from the PC uses the deflection angle δ from the forward tangent to the chord that reaches the new point. The central angle to the point is θ = ℓ / R radians = (ℓ / L) Δ. The deflection is half of that central angle (tangent-chord theorem):
- δ = ℓ / (2R) radians
- δ = (ℓ / L) × (Δ / 2) (δ and Δ in the same angular unit)
δ° = ℓ D / 200 with arc-definition D and ℓ in feet, because 100 ft of arc subtends D°, so 100 ft of deflection is D/2.
The chord from the PC to the point is c = 2 R sin(δ) , with δ in the same mode as the sine function.
To apply those formulas to the PI 45+00 example you still need R or Δ. The stem gave T and L only, so recover them from T = R tan(Δ/2) and L = R Δ π / 180. Dividing gives
tan(Δ/2) / (Δ in radians) = T / L = 250 / 480 = 0.520833.
Solving yields Δ = 39.537° (39°32'13") and
R = T / tan(Δ/2) = 250.00 / tan(19.7685°) = 695.60 ft .
Check: L = 695.60 × 39.537 × π / 180 = 480.00 ft. Arc D = 5729.58 / 695.60 = 8.237° .
Now the 120-ft point:
- δ = 120 / (2 × 695.60) = 0.086257 rad = 4.942° = 4°56'32"
- Same result: δ = (120 / 480) × (39.537 / 2) = 0.25 × 19.7685 = 4.942°
- Same result again: δ° = 120 × 8.237 / 200 = 4.942°
Chord from PC: c = 2 × 695.60 × sin(4.942°) = 119.85 ft .
The chord is 0.15 ft shorter than the 120-ft arc—the usual LC < L relationship at a small central angle. Staking by deflection, you occupy the PC, backsight the PI (or another point on the back tangent), flip to the forward tangent, and turn 4°56'32" to sight the 119.85-ft chord.
- ℓ from PC (ft) Station Deflection δ Chord from PC (ft)
- 0.00 42+50.00 0.000° 0.00
- 120.00 43+70.00 4.942° 119.85
- 240.00 44+90.00 9.884° 238.81
- 360.00 46+10.00 14.826° 356.00
- 480.00 (PT) 47+30.00 19.769° = Δ/2 470.53 = LC
- Even-station stakes
Construction crews usually want 43+00, 44+00, 45+00, 46+00, 47+00—not an even 100-ft arc from the PC. The first even station after PC 42+50.00 is 43+00 , so ℓ = 50.00 ft, δ = 50 × 8.237 / 200 = 2.059° , and the chord is 2 × 695.60 × sin(2.059°) = 49.99 ft . Each additional 100 ft of arc adds D/2 = 4.118° of deflection. At the PT, ℓ = L and δ = Δ/2 = 19.769° , matching the last row of the table.
Layout traps
PT = PI + T as a station. Wrong. PT = PC + L.
Measuring 120 ft from the PI. The PI is off the curve.
Using δ = ℓ / R. That is the central angle θ, twice the deflection.
Degree/radian mix in sin(δ) when converting the chord.
Adding T along the curve. T is not centerline between PC and PT.
Instrument at the PI to turn Δ/2 to the PC. You can occupy the PI to turn the intersection angle, but stationing and deflection layout for points on the arc start from the PC (or PT).
If the stem already gives R or Δ, skip the T–L recovery and go straight to δ = ℓ / (2R). The CES calculator rules still apply: two handhelds, no QWERTY, and you must know whether the trig is in degrees or radians before you hit sine.