Study guide
6.4 Termination, Final Pay & Employment Recordkeeping
California C-20 HVAC Contractor License CSLB
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & CA C-20 License Overview
1.1 About the California C-20 HVAC Contractor License & CSLB Exam Path 1.2 License Eligibility, Experience Requirements & Application Process 1.3 Exam Format, Scoring, Retakes & Bond/Insurance Activation
2 Chapter 2: CSLB Licensing Law & Business Organization
2.1 CSLB Structure, License Classifications & the C-20 Scope of Work 2.2 Business Entity Types, Qualifying Individuals & RME/RMO Rules 2.3 Advertising Rules, License Number Disclosure & Subcontracting 2.4 License Renewal, Inactive Status, Violations & Disciplinary Actions
3 Chapter 3: Business Finances & Taxes
3.1 Business Accounting Principles & Financial Statements 3.2 Cash Flow Management & Business Planning 3.3 Federal & California Tax Obligations for Contractors 3.4 Financial Reporting & Recordkeeping Requirements
4 Chapter 4: Contracts, Bidding & Estimating
4.1 Home Improvement Contract (HIC) Requirements & Mandatory Disclosures 4.2 Service & Repair Contracts, Cancellation Rights & Notice Requirements 4.3 Commercial Contracts, Bidding Procedures & Cost Estimating 4.4 Change Orders, Progress Payments & Contract Administration 4.5 Contract Breach, Warranties & Dispute Resolution
5 Chapter 5: Insurance, Bonds & Mechanics Liens
5.1 Contractor's License Bond & Qualifying Individual Bond Requirements 5.2 Workers' Compensation Insurance & Exemption Rules 5.3 Commercial General Liability & Property Insurance 5.4 Mechanics Liens, Preliminary Notices & Stop Payment Notices
6 Chapter 6: Employment Law, Payroll & Public Works
6.1 Hiring, Employee vs. Independent Contractor Classification 6.2 Wage & Hour Law, Overtime & Payroll Requirements 6.3 Employee Supervision, Training & Certified Payroll Recordkeeping 6.4 Termination, Final Pay & Employment Recordkeeping 6.5 Public Works: Prevailing Wage, Apprenticeship & DIR Compliance
7 Chapter 7: Cal/OSHA & Legal Safety Compliance
7.1 Cal/OSHA Injury & Illness Prevention Program (IIPP) & Recordkeeping 7.2 Jobsite Hazard Communication, PPE & Training Requirements 7.3 Asbestos, Lead & Hazardous Materials Handling Rules 7.4 Accident Reporting, Emergency Action Plans & Cal/OSHA Enforcement
8 Chapter 8: HVAC Planning, Load Calculations & Estimating
8.1 Jobsite Evaluation, Blueprint Reading & System Selection 8.2 Manual J Heat Load & Heat Gain Calculations 8.3 Psychrometrics & Air Properties for HVAC Design 8.4 Duct Design & Sizing (Manual D) & Airflow Balancing 8.5 Material & Labor Estimating for HVAC Projects
9 Chapter 9: California Title 24 Energy Code & Mechanical Code Compliance
9.1 Title 24 Part 6 Energy Code Requirements for HVAC Systems 9.2 HERS Verification & Duct Testing Requirements 9.3 California Mechanical Code (CMC) Key Provisions for C-20 Work 9.4 Permits, Inspections & Code Compliance Documentation
10 Chapter 10: Equipment Installation, Ductwork & System Startup
10.1 Equipment Setting, Mounting & Clearances 10.2 Ductwork Fabrication, Sealing & Insulation 10.3 Refrigerant Piping, Brazing & Soldering Techniques 10.4 Electrical & Control Wiring for HVAC Systems 10.5 System Charging, Combustion Venting & Startup/Commissioning
11 Chapter 11: Refrigeration Cycle, Heat Pumps & Solar-Thermal
11.1 Refrigeration Cycle Fundamentals & Components 11.2 Heat Pump Systems & Water Heating Heat Pumps 11.3 Solar-Thermal HVAC Integration
12 Chapter 12: Troubleshooting, Repair & Maintenance
12.1 Electrical Component Diagnostics & Thermostat/Control Troubleshooting 12.2 Mechanical Failure Analysis & Compressor/Motor Diagnostics 12.3 Refrigeration Cycle Diagnostics & Combustion/CO Troubleshooting 12.4 Preventive Maintenance Programs & Service Procedures
13 Chapter 13: Trade Safety & EPA Refrigerant Regulations
13.1 Cal/OSHA Jobsite Safety, PPE & Ladder/Fall Protection 13.2 EPA Section 608 Refrigerant Recovery, Recycling & Handling 13.3 Combustion Venting, Carbon Monoxide & Confined Space Safety 13.4 Hazardous Materials on HVAC Jobsites (Asbestos, Lead, Refrigerant Oil)
6.4 Termination, Final Pay & Employment Recordkeeping
Key Takeaways Explain This Topic AI
Labor Code § 201 requires immediate payment of all final wages upon involuntary termination or layoff.
Labor Code § 202 requires final wages within 72 hours of a resignation given with less than 72 hours' notice, or on the employee's last day worked if the employee gave at least 72 hours' notice.
Late final wages trigger waiting-time penalties under Labor Code § 203 equal to the employee's daily wage for up to 30 calendar days.
Accrued, unused vacation or PTO is treated as earned wages in California and must be paid out at separation; use-it-or-lose-it forfeiture policies are illegal, though reasonable accrual caps are allowed.
Payroll records (Labor Code § 1174, 3 years), personnel records (Labor Code § 1198.5, 3 years post-termination, expanded by SB 513 effective January 1, 2026 to include training/education records), and Form I-9 (3 years after hire or 1 year after termination, whichever is later) all carry distinct retention clocks.
Last updated: July 2026
Final Pay Timing: Termination vs. Resignation
California's final-pay rules are strict and unforgiving of cash-flow excuses. The exact deadline depends on how the employment relationship ends:
Separation Event Final Wages Due Statute
Involuntary termination or layoff (employer-initiated) Immediately, at the time of termination Labor Code § 201
- Resignation with at least 72 hours' notice On the employee's last day of work Labor Code § 202
- Resignation with less than 72 hours' notice Within 72 hours of the resignation Labor Code § 202
Layoff in certain seasonal industries (not typical HVAC field work) Special timing rules may apply Labor Code § 201.5 et seq.
An HVAC contractor who lets an installer go on a Tuesday afternoon must have that worker's full final paycheck ready that same day -- including all earned wages, accrued and unused vacation, and any other amounts due. There is no grace period tied to the next scheduled payroll run.
Where the final check is delivered also matters. Under Labor Code § 208 , a discharged employee must be paid at the place of discharge -- handing a terminated technician a check at the shop or the jobsite, not mailing it days later. An employee who quits without 72 hours' notice may instead ask that the final payment be mailed to a specific address, in which case the mailing date counts as the payment date. A standing direct-deposit authorization for regular payroll does not automatically cover final wages; many employers treat the final check as a live paycheck unless the employee has separately authorized direct deposit for it.
Waiting-Time Penalties (Labor Code § 203)
If an employer willfully fails to pay final wages on time, the employee's daily wage continues as a penalty for up to 30 calendar days -- the waiting-time penalty . It is calculated using the employee's normal daily rate (based on the number of hours the employee typically worked per day, up to 8 hours, times the applicable hourly rate) and continues to accrue every day the wages remain unpaid, including weekends, up to the 30-day cap.
Example: A service technician earning $30/hour and normally working 8-hour days is terminated on a Friday but does not receive a final check until 12 days later. The contractor owes a waiting-time penalty of roughly 12 days x 8 hours x $30 = $2,880 , on top of the wages already owed -- even though the technician's actual unpaid wages might have been a small fraction of that amount.
What Must Be Included in Final Pay
Final pay is not limited to hours worked in the last pay period. It must also include:
Accrued, unused vacation or PTO -- California treats earned vacation as a form of wages that vests as it accrues; it must be paid out at the employee's final rate of pay, and forfeiting accrued vacation through a use-it-or-lose-it policy is illegal, though employers may cap total accrual once a ceiling is reached.
Unreimbursed necessary business expenses owed under Labor Code § 2802 -- for example, mileage or tools an employee was required to buy for the job and never reimbursed.
Any earned commissions or nondiscretionary bonuses that were due at the time of separation, under the terms of the applicable plan.
A common exam trap is confusing vacation with paid sick leave . Vacation and PTO are earned wages that must always be cashed out at separation. Paid sick leave accrued under California's Healthy Workplaces, Healthy Families Act is different -- unlike vacation, unused paid sick leave generally does not have to be paid out when employment ends (though if the employee is rehired within one year, previously accrued and unused sick leave must be reinstated). Treating the two leave banks the same way on a final paycheck is a frequent, and avoidable, payroll error.
Employment Recordkeeping After Separation
Termination does not end a contractor's recordkeeping duties -- several distinct retention clocks keep running:
- Record Minimum Retention Authority
- Form I-9 Later of 3 years after hire, or 1 year after termination Federal (IRCA)
- Payroll records (hours, wages, rates) At least 3 years Labor Code § 1174
Personnel records (applications, performance, discipline, and -- as of January 1, 2026 -- training/education records) At least 3 years after termination Labor Code § 1198.5, as amended by SB 513
Certified payroll records (public works) At least 3 years after project completion Labor Code § 1776
Employees (and, on written authorization, their representatives) have the right to inspect or receive copies of their own personnel file. Employers must generally comply with a written request within 30 days (or up to 35 days by mutual written agreement). Discarding personnel files too early because a worker left the company long ago is itself a compliance failure that can surface during a Labor Commissioner audit years after the employee is gone.
Scenario
An HVAC service tech resigns by text message on a Wednesday morning, effective immediately, giving no advance notice. Under Labor Code § 202, the employer has until 72 hours from the resignation to deliver final wages (or must mail them if the employee requests mailing to a specific address, with the mailing date counting as the payment date). If the tech had instead given two weeks' written notice, the employer could pay the final check on the tech's last actual day worked , since the notice period exceeded 72 hours.