Study guide

6.2 Wage & Hour Law, Overtime & Payroll Requirements

California C-20 HVAC Contractor License CSLB

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & CA C-20 License Overview

1.1 About the California C-20 HVAC Contractor License & CSLB Exam Path 1.2 License Eligibility, Experience Requirements & Application Process 1.3 Exam Format, Scoring, Retakes & Bond/Insurance Activation

2 Chapter 2: CSLB Licensing Law & Business Organization

2.1 CSLB Structure, License Classifications & the C-20 Scope of Work 2.2 Business Entity Types, Qualifying Individuals & RME/RMO Rules 2.3 Advertising Rules, License Number Disclosure & Subcontracting 2.4 License Renewal, Inactive Status, Violations & Disciplinary Actions

3 Chapter 3: Business Finances & Taxes

3.1 Business Accounting Principles & Financial Statements 3.2 Cash Flow Management & Business Planning 3.3 Federal & California Tax Obligations for Contractors 3.4 Financial Reporting & Recordkeeping Requirements

4 Chapter 4: Contracts, Bidding & Estimating

4.1 Home Improvement Contract (HIC) Requirements & Mandatory Disclosures 4.2 Service & Repair Contracts, Cancellation Rights & Notice Requirements 4.3 Commercial Contracts, Bidding Procedures & Cost Estimating 4.4 Change Orders, Progress Payments & Contract Administration 4.5 Contract Breach, Warranties & Dispute Resolution

5 Chapter 5: Insurance, Bonds & Mechanics Liens

5.1 Contractor's License Bond & Qualifying Individual Bond Requirements 5.2 Workers' Compensation Insurance & Exemption Rules 5.3 Commercial General Liability & Property Insurance 5.4 Mechanics Liens, Preliminary Notices & Stop Payment Notices

6 Chapter 6: Employment Law, Payroll & Public Works

6.1 Hiring, Employee vs. Independent Contractor Classification 6.2 Wage & Hour Law, Overtime & Payroll Requirements 6.3 Employee Supervision, Training & Certified Payroll Recordkeeping 6.4 Termination, Final Pay & Employment Recordkeeping 6.5 Public Works: Prevailing Wage, Apprenticeship & DIR Compliance

7 Chapter 7: Cal/OSHA & Legal Safety Compliance

7.1 Cal/OSHA Injury & Illness Prevention Program (IIPP) & Recordkeeping 7.2 Jobsite Hazard Communication, PPE & Training Requirements 7.3 Asbestos, Lead & Hazardous Materials Handling Rules 7.4 Accident Reporting, Emergency Action Plans & Cal/OSHA Enforcement

8 Chapter 8: HVAC Planning, Load Calculations & Estimating

8.1 Jobsite Evaluation, Blueprint Reading & System Selection 8.2 Manual J Heat Load & Heat Gain Calculations 8.3 Psychrometrics & Air Properties for HVAC Design 8.4 Duct Design & Sizing (Manual D) & Airflow Balancing 8.5 Material & Labor Estimating for HVAC Projects

9 Chapter 9: California Title 24 Energy Code & Mechanical Code Compliance

9.1 Title 24 Part 6 Energy Code Requirements for HVAC Systems 9.2 HERS Verification & Duct Testing Requirements 9.3 California Mechanical Code (CMC) Key Provisions for C-20 Work 9.4 Permits, Inspections & Code Compliance Documentation

10 Chapter 10: Equipment Installation, Ductwork & System Startup

10.1 Equipment Setting, Mounting & Clearances 10.2 Ductwork Fabrication, Sealing & Insulation 10.3 Refrigerant Piping, Brazing & Soldering Techniques 10.4 Electrical & Control Wiring for HVAC Systems 10.5 System Charging, Combustion Venting & Startup/Commissioning

11 Chapter 11: Refrigeration Cycle, Heat Pumps & Solar-Thermal

11.1 Refrigeration Cycle Fundamentals & Components 11.2 Heat Pump Systems & Water Heating Heat Pumps 11.3 Solar-Thermal HVAC Integration

12 Chapter 12: Troubleshooting, Repair & Maintenance

12.1 Electrical Component Diagnostics & Thermostat/Control Troubleshooting 12.2 Mechanical Failure Analysis & Compressor/Motor Diagnostics 12.3 Refrigeration Cycle Diagnostics & Combustion/CO Troubleshooting 12.4 Preventive Maintenance Programs & Service Procedures

13 Chapter 13: Trade Safety & EPA Refrigerant Regulations

13.1 Cal/OSHA Jobsite Safety, PPE & Ladder/Fall Protection 13.2 EPA Section 608 Refrigerant Recovery, Recycling & Handling 13.3 Combustion Venting, Carbon Monoxide & Confined Space Safety 13.4 Hazardous Materials on HVAC Jobsites (Asbestos, Lead, Refrigerant Oil)

6.2 Wage & Hour Law, Overtime & Payroll Requirements

Key Takeaways Explain This Topic AI

California's statewide minimum wage rose to $16.90/hour effective January 1, 2026 (Labor Code § 1182.12 cost-of-living adjustment); many CA cities and counties set higher local minimums that control on jobsites within their boundaries.

Nonexempt employees earn overtime at 1.5x after 8 hours in a workday or 40 hours in a workweek, and 2x after 12 hours in a workday or after 8 hours worked on the 7th consecutive day in a workweek.

Nonexempt employees get an unpaid 30-minute meal period by the end of hour 5 (a second by the end of hour 10 on longer shifts) and a paid 10-minute rest break for every 4 hours worked or major fraction thereof; missed breaks trigger a one-hour premium.

Labor Code § 204 requires wages earned the 1st through the 15th to be paid by the 26th of the same month, and wages earned the 16th through month-end to be paid by the 10th of the following month.

Itemized wage statements under Labor Code § 226 must show specific required items each payday; noncompliant statements expose the contractor to statutory penalties per pay period, separate from any unpaid wages.

Last updated: July 2026

California Minimum Wage & Covered Employees

Field HVAC technicians, installers, and helpers are almost always nonexempt employees under California law -- they must be paid for every hour worked and are eligible for overtime, meal periods, and rest breaks. Job titles like lead installer or foreman do not create an overtime exemption; California's narrow executive, administrative, and professional exemptions require a specific duties test and a minimum salary threshold, not just a title.

California's statewide minimum wage rises each January 1 under a cost-of-living formula in Labor Code § 1182.12 . Effective January 1, 2026, the statewide minimum wage is $16.90 per hour . Many California cities and counties set their own local minimum wage ordinances that are higher than the state rate; when a jobsite falls inside one of those jurisdictions, the contractor must pay the higher of the state or local rate for hours worked there. "Hours worked" includes all time the employer suffers or permits the employee to work, including mandatory safety meetings and required van-loading time before driving to the first stop -- there is no such thing as unpaid cleanup time for a nonexempt worker.

Daily and Weekly Overtime

Unlike the federal Fair Labor Standards Act, which only requires overtime after 40 hours in a week, California layers on daily overtime rules that apply regardless of the weekly total:

  • Hours Worked Overtime Rate
  • Over 8 hours in a workday 1.5x regular rate
  • Over 40 hours in a workweek 1.5x regular rate
  • Over 12 hours in a workday 2x regular rate
  • First 8 hours on the 7th consecutive day worked in a workweek 1.5x regular rate
  • Hours beyond 8 on the 7th consecutive day 2x regular rate

Example: A service technician works a 13-hour day finishing an emergency commercial rooftop repair. The first 8 hours are straight time, hours 9 through 12 are paid at 1.5x, and hour 13 is paid at 2x -- even though the technician worked only one long day and may still be under 40 hours for the week.

The regular rate of pay used to calculate overtime is not always the flat hourly wage -- nondiscretionary bonuses, shift differentials, and certain other compensation can increase the regular rate. Some employers adopt a properly noticed and voted-on alternative workweek schedule (for example, four 10-hour days) that changes the daily overtime threshold, but this requires a formal election procedure; a contractor cannot simply declare a 4x10 schedule to avoid daily overtime.

Meal Periods and Rest Breaks

Nonexempt employees are entitled to:

An unpaid, off-duty 30-minute meal period no later than the end of the 5th hour of work, and a second 30-minute meal period no later than the end of the 10th hour on shifts over 10 hours (waivable in limited circumstances).

A paid, 10-minute rest break for every 4 hours worked or major fraction thereof, taken as close to the middle of each work period as practical.

IWC Wage Order 16 (covering on-site construction, drilling, logging, and mining occupations, including HVAC field work) allows a narrow on-duty meal period exception when the nature of the work truly prevents relieving the employee of all duty -- for example, a single technician dispatched alone to a remote jobsite. An on-duty meal period is only valid with a written agreement that the employee may revoke at any time, and the on-duty period must still be paid.

If an employer fails to provide a compliant meal or rest period, it owes the employee a premium of one additional hour of pay at the employee's regular rate for each workday the violation occurs, and meal and rest break violations are tracked separately -- up to two premium payments can be owed in a single day.

Pay Frequency and Payday Rules

Labor Code § 204 sets minimum pay frequency for most employees:

  • Wages Earned Must Be Paid By
  • 1st through the 15th of the month The 26th day of the same month
  • 16th through the end of the month The 10th day of the following month

Weekly, biweekly, or semimonthly schedules that meet or exceed these timing rules are also permitted. Employers must designate regular paydays in advance and post the payday schedule at the workplace. Overtime wages earned in a given pay period may lawfully be paid on the payday for the following regular pay period if the exact overtime amount cannot be calculated in time -- but straight-time wages cannot be delayed on that basis.

Itemized Wage Statements (Labor Code § 226)

Every payday, employers must furnish an itemized wage statement showing required items including: gross wages earned; total hours worked (for hourly employees); all deductions; net wages earned; the pay period dates; the employee's name and the last four digits of their Social Security number or an employee ID number; the employer's legal name and address; and applicable hourly rates and hours worked at each rate, including overtime rates. Missing or inaccurate wage statements can trigger separate statutory penalties per pay period, on top of any wages actually owed.