Study guide
1.3 Exam Format, Scoring, Retakes & Bond/Insurance Activation
California C-20 HVAC Contractor License CSLB
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & CA C-20 License Overview
1.1 About the California C-20 HVAC Contractor License & CSLB Exam Path 1.2 License Eligibility, Experience Requirements & Application Process 1.3 Exam Format, Scoring, Retakes & Bond/Insurance Activation
2 Chapter 2: CSLB Licensing Law & Business Organization
2.1 CSLB Structure, License Classifications & the C-20 Scope of Work 2.2 Business Entity Types, Qualifying Individuals & RME/RMO Rules 2.3 Advertising Rules, License Number Disclosure & Subcontracting 2.4 License Renewal, Inactive Status, Violations & Disciplinary Actions
3 Chapter 3: Business Finances & Taxes
3.1 Business Accounting Principles & Financial Statements 3.2 Cash Flow Management & Business Planning 3.3 Federal & California Tax Obligations for Contractors 3.4 Financial Reporting & Recordkeeping Requirements
4 Chapter 4: Contracts, Bidding & Estimating
4.1 Home Improvement Contract (HIC) Requirements & Mandatory Disclosures 4.2 Service & Repair Contracts, Cancellation Rights & Notice Requirements 4.3 Commercial Contracts, Bidding Procedures & Cost Estimating 4.4 Change Orders, Progress Payments & Contract Administration 4.5 Contract Breach, Warranties & Dispute Resolution
5 Chapter 5: Insurance, Bonds & Mechanics Liens
5.1 Contractor's License Bond & Qualifying Individual Bond Requirements 5.2 Workers' Compensation Insurance & Exemption Rules 5.3 Commercial General Liability & Property Insurance 5.4 Mechanics Liens, Preliminary Notices & Stop Payment Notices
6 Chapter 6: Employment Law, Payroll & Public Works
6.1 Hiring, Employee vs. Independent Contractor Classification 6.2 Wage & Hour Law, Overtime & Payroll Requirements 6.3 Employee Supervision, Training & Certified Payroll Recordkeeping 6.4 Termination, Final Pay & Employment Recordkeeping 6.5 Public Works: Prevailing Wage, Apprenticeship & DIR Compliance
7 Chapter 7: Cal/OSHA & Legal Safety Compliance
7.1 Cal/OSHA Injury & Illness Prevention Program (IIPP) & Recordkeeping 7.2 Jobsite Hazard Communication, PPE & Training Requirements 7.3 Asbestos, Lead & Hazardous Materials Handling Rules 7.4 Accident Reporting, Emergency Action Plans & Cal/OSHA Enforcement
8 Chapter 8: HVAC Planning, Load Calculations & Estimating
8.1 Jobsite Evaluation, Blueprint Reading & System Selection 8.2 Manual J Heat Load & Heat Gain Calculations 8.3 Psychrometrics & Air Properties for HVAC Design 8.4 Duct Design & Sizing (Manual D) & Airflow Balancing 8.5 Material & Labor Estimating for HVAC Projects
9 Chapter 9: California Title 24 Energy Code & Mechanical Code Compliance
9.1 Title 24 Part 6 Energy Code Requirements for HVAC Systems 9.2 HERS Verification & Duct Testing Requirements 9.3 California Mechanical Code (CMC) Key Provisions for C-20 Work 9.4 Permits, Inspections & Code Compliance Documentation
10 Chapter 10: Equipment Installation, Ductwork & System Startup
10.1 Equipment Setting, Mounting & Clearances 10.2 Ductwork Fabrication, Sealing & Insulation 10.3 Refrigerant Piping, Brazing & Soldering Techniques 10.4 Electrical & Control Wiring for HVAC Systems 10.5 System Charging, Combustion Venting & Startup/Commissioning
11 Chapter 11: Refrigeration Cycle, Heat Pumps & Solar-Thermal
11.1 Refrigeration Cycle Fundamentals & Components 11.2 Heat Pump Systems & Water Heating Heat Pumps 11.3 Solar-Thermal HVAC Integration
12 Chapter 12: Troubleshooting, Repair & Maintenance
12.1 Electrical Component Diagnostics & Thermostat/Control Troubleshooting 12.2 Mechanical Failure Analysis & Compressor/Motor Diagnostics 12.3 Refrigeration Cycle Diagnostics & Combustion/CO Troubleshooting 12.4 Preventive Maintenance Programs & Service Procedures
13 Chapter 13: Trade Safety & EPA Refrigerant Regulations
13.1 Cal/OSHA Jobsite Safety, PPE & Ladder/Fall Protection 13.2 EPA Section 608 Refrigerant Recovery, Recycling & Handling 13.3 Combustion Venting, Carbon Monoxide & Confined Space Safety 13.4 Hazardous Materials on HVAC Jobsites (Asbestos, Lead, Refrigerant Oil)
1.3 Exam Format, Scoring, Retakes & Bond/Insurance Activation
Key Takeaways Explain This Topic AI
Both CSLB exams are closed-book, computer-based, multiple-choice tests delivered by PSI, with 3.5 hours allotted per exam according to CSLB's own Examination FAQ.
CSLB does not publish one universal passing percentage; it sets each exam's passing standard psychometrically and reports only pass/fail, though approximately 72% is a commonly-cited approximate benchmark used across prep resources.
A failed exam requires a mandatory 21 calendar day wait before rescheduling, and the entire application becomes void if both exams are not passed within 18 months of acceptance.
After passing both exams, CSLB sends a Bond and Fee letter requiring the $25,000 contractor's license bond (raised from $15,000 by Senate Bill 607, effective January 1, 2023), the initial license fee, and proof of workers' compensation before the license is issued.
C-20 is one of four classifications -- with C-8, C-22, and D-49 -- required under Senate Bill 216 and B&P Code Section 7125 to carry workers' compensation regardless of employee count since January 1, 2023, years ahead of the broader Senate Bill 1455 universal deadline of January 1, 2028.
Last updated: July 2026
- 1.3 Exam Format, Scoring, Retakes & Bond/Insurance Activation
- How the Exams Are Delivered
Once CSLB accepts an application, both required exams -- Law & Business and C-20 Trade -- are delivered as closed-book, computer-based, multiple-choice tests through PSI , CSLB's testing vendor, at PSI test centers located throughout California (online proctoring is available for some candidates where permitted). Closed-book means no code books, notes, phones, or calculators are allowed in the testing room; every answer has to come from what you actually know.
According to CSLB's own Examination FAQ, candidates are allotted 3.5 hours to complete each examination . The Law & Business exam and the C-20 Trade exam are scored separately , and you must pass both to qualify for licensure. You may schedule the two exams on the same day or on different days, whichever fits your preparation timeline. Third-party sources commonly cite the Law & Business exam at roughly 115 multiple-choice questions ; CSLB's own C-20 Trade study guide describes its question count and domain weighting as approximate, commonly cited around 100 questions . Treat any specific number you see for either exam as a planning estimate rather than a guaranteed count, since CSLB reserves the right to vary exact test forms.
Passing Score
CSLB does not publish one universal percentage cut score that applies identically to every exam form. Its Examination FAQ specifically notes that the passing score report does not show your overall numeric score -- only whether you passed. CSLB sets each exam's passing standard psychometrically (statistically, based on question difficulty across the item pool), and you receive a pass/fail result at the test center immediately after finishing. That said, prep resources -- and this site's own summary -- commonly cite approximately 72% as a general benchmark for CSLB trade and Law & Business exams. Treat this figure as a widely-repeated approximation useful for study planning, not as an officially published fixed number.
If You Don't Pass: The 21-Day Rule
If you fail an exam, CSLB requires a mandatory 21 calendar day waiting period before you can pay and reschedule that same exam through PSI. Exam fees are paid directly to PSI when you schedule or reschedule -- confirm current pricing on PSI's CSLB candidate portal, since CSLB shifted to direct PSI fee payment and fee amounts can change. You may cancel or reschedule an already-booked appointment without forfeiting your fee if you notify PSI at least two days before your scheduled date.
The 18-Month Application Window
An accepted application remains valid for 18 months from its acceptance date, during which you must pass both required exams. If you have not passed both within 18 months, the application is voided and you must reapply with new fees. CSLB may grant an extension of up to 90 days if you submit documented evidence that a missed exam date resulted from a medical emergency or other circumstance genuinely beyond your control. Because of the 21-day retake rule, a candidate who fails an exam close to the 18-month deadline can run out of runway for a second attempt -- plan your first attempt with enough buffer to allow for at least one retake if needed.
After You Pass: The Bond and Fee Letter
Passing both exams does not make you licensed yet. CSLB's Issuance Unit sends a Bond and Fee letter listing exactly what you must submit before your license is issued:
- Requirement Detail
- Initial license fee $200 (sole owner) or $350 (partnership, corporation, LLC, or joint venture)
Contractor's License Bond $25,000 , filed with the Registrar (increased from $15,000, effective January 1, 2023, under Senate Bill 607)
Bond of Qualifying Individual Also $25,000 in certain RME/RMO situations (Chapter 5 covers when it applies)
Asbestos certification All new applicants, regardless of classification, must complete CSLB's open-book asbestos exam/verification form
Workers' compensation proof Required for C-20 licensees regardless of employee count (see below)
Wait for the letter before buying your bond. Purchasing a bond too early risks it expiring before your license is actually issued.
Workers' Compensation: C-20 Is Ahead of the Curve
C-20 is one of only four classifications -- alongside C-8 (Concrete), C-22 (Asbestos Abatement), and D-49 (Tree Service) -- singled out by Senate Bill 216 (2022) , codified at B&P Code Section 7125, to require proof of active workers' compensation insurance (or a Certificate of Self-Insurance) regardless of whether the licensee has any employees . That requirement took effect January 1, 2023 , and CSLB began removing the C-20 classification from any license without a valid certificate on file after June 30, 2023 . Senate Bill 1455 (2024) later extended a similar universal workers' compensation requirement to every remaining CSLB classification , but set that broader deadline at January 1, 2028 , and directed CSLB to build a formal exemption-verification process for licensees who genuinely have no employees. In other words: most California trades have until 2028 to comply, but C-20 HVAC contractors have already been required to carry workers' comp, or hold a valid exemption, since 2023 -- and that earlier deadline was not relaxed by SB 1455's later phase-in for other trades.
Once your bond is filed, your license fee is paid, and your workers' compensation documentation (or verified exemption) is on file, CSLB activates your license and you may legally contract C-20 HVAC work in California.