Study guide
Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection
IATA Dangerous Goods Regulations Air
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: General Philosophy, Applicability & CBTA Framework
Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods
2 Chapter 2: Dangerous Goods Limitations
Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail
3 Chapter 3: Classification of the 9 Hazard Classes
Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix
4 Chapter 4: Identification & List of Dangerous Goods
Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow
5 Chapter 5: Packing Requirements & UN Specification Packaging
General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650
6 Chapter 6: Marking & Labelling Requirements
DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks
7 Chapter 7: Dangerous Goods Documentation
DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention
8 Chapter 8: Stowage, Handling & Emergency Procedures
Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection
Key Takeaways Explain This Topic AI
Class 7 radioactive material is defined as any material containing radionuclides where both the activity concentration and the total activity in the consignment exceed specified threshold values in Section 3.7.
A1 values represent the maximum activity for special form radioactive material in a Type A package, while A2 values represent the maximum activity for normal form radioactive material.
Class 7 packages are categorized into Category I-WHITE, Category II-YELLOW, and Category III-YELLOW based on surface radiation dose rates and the Transport Index (TI).
The Transport Index (TI) is a single dimensionless number derived from the maximum radiation level at a distance of 1 meter from the external surface of the package (in mSv/h multiplied by 100, or mrem/h).
Radioactive packages with a TI exceeding 10.0 or a surface radiation rate exceeding 2.0 mSv/h (200 mrem/h) must be transported under Exclusive Use (and TI > 10 requires Category III-YELLOW).
Last updated: August 2026
Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection
Class 7 (Radioactive Material) differs fundamentally from all other hazard classes because its hazard originates from nuclear physics—spontaneous atomic nuclear transformations resulting in ionizing radiation emission (alpha particles, beta particles, gamma rays, or neutrons)—rather than chemical reactions. The regulation of Class 7 under the IATA DGR incorporates standards established by the International Atomic Energy Agency (IAEA) .
Definition of Class 7 Radioactive Material
A material is classified as Class 7 if both of the following regulatory conditions are met:
The activity concentration of the radionuclide exceeds the activity concentration limit specified in IATA DGR Table 3.7.2; AND
The total activity of the consignment exceeds the total activity limit for an exempt consignment specified in Table 3.7.2.
Units of Radiation Measurement
Activity ( A A A ): Measured in Becquerels (Bq) , representing one disintegration per second. (Historically measured in Curies, C i Ci C i , where 1 Ci = 3.7 × 10 10 Bq 1\text{ Ci} = 3.7 \times 10^{10}\text{ Bq} 1 Ci = 3.7 × 1 0 10 Bq ).
Equivalent Dose Rate: Measured in Sieverts per hour (Sv/h) or millisieverts per hour (mSv/h) , representing biological dose equivalent. (Historically measured in rem/h, where 1 mSv/h = 100 mrem/h 1\text{ mSv/h} = 100\text{ mrem/h} 1 mSv/h = 100 mrem/h or 1 μ Sv/h = 0.1 mrem/h 1\text{ }\mu\text{Sv/h} = 0.1\text{ mrem/h} 1 μ Sv/h = 0.1 mrem/h ).
Activity Limits: A 1 A_1 A 1 and A 2 A_2 A 2 Values
The IATA DGR specifies activity limits—known as A 1 A_1 A 1 and A 2 A_2 A 2 values (expressed in Gigabecquerels, G B q GBq GBq )—for every single radionuclide:
A 1 A_1 A 1 Value: The maximum activity of special form radioactive material permitted in a Type A package .
Special form refers to an indispersible solid radioactive material or a sealed capsule containing radioactive material that can only be opened by destroying the capsule.
A 2 A_2 A 2 Value: The maximum activity of normal form radioactive material permitted in a Type A package .
Normal form refers to radioactive material that does not qualify as special form (e.g., liquids, gases, unsealed powders).
Rule: If a consignment of radioactive material exceeds A 1 A_1 A 1 (for special form) or A 2 A_2 A 2 (for normal form), it cannot be shipped in a Type A package. It must be packaged in a Type B or Type C package.
- Class 7 Package Types CLASS 7 PACKAGE TYPES
- ┌──────────────────┬──────────────────┬──────────────────┬──────────────────┬──────────────────┐
- │ EXCEPTED PACKAGE │INDUSTRIAL PACKAGE│ TYPE A PACKAGE │ TYPE B PACKAGE │ TYPE C PACKAGE │
- ├──────────────────┼──────────────────┼──────────────────┼──────────────────┼──────────────────┤
- │ Extremely low │ Used for Low │ Activity <= A1 │ Activity > A1/A2 │ Extremely high │
- │ activity │ Specific Activity│ (special form) │ Severe accident │ activity air │
- │ (e.g. 10⁻³ A2). │ (LSA) & SCO. │ or <= A2 (normal)│ resistant test │ transport │
- │ Exempt labels. │ IP-1, IP-2, IP-3.│ Normal air test. │ (drop, fire 800°C│ (high speed drop)│
- └──────────────────┴──────────────────┴──────────────────┴──────────────────┴──────────────────┘
Excepted Package: Contains activity levels so small (a fraction of A 1 A_1 A 1 or A 2 A_2 A 2 , e.g., ≤ 10 − 3 A 1 \le 10^{-3} A_1 ≤ 1 0 − 3 A 1 or 10 − 4 A 2 10^{-4} A_2 1 0 − 4 A 2 ) that package design requirements are minimal. Exempt from standard Class 7 hazard labels (requires Excepted Package mark).
Industrial Package (Type IP-1, IP-2, IP-3): Used for Low Specific Activity (LSA) materials and Surface Contaminated Objects (SCO) such as contaminated laboratory clothing or ores.
Type A Package: Designed to withstand normal conditions of air transport (water spray, free drop from 1.2 m, stacking, and penetration tests) without loss or dispersal of radioactive contents. Activity is strictly limited to ≤ A 1 \le A_1 ≤ A 1 or ≤ A 2 \le A_2 ≤ A 2 .
Type B Package [Type B(U) / Type B(M)]: Designed to withstand severe hypothetical accident conditions (drop from 9 m onto unyielding surface, thermal test at 800°C for 30 minutes, 15 m water immersion test). Used for high-activity industrial sources ( e.g., Cobalt-60, Iridium-192 ). Requires Unilateral B(U) or Multilateral B(M) competent authority approval.
Type C Package: Designed for high-activity air transport capable of withstanding extreme impact (90 m/s impact test) and prolonged thermal tests.
Transport Index (TI) Calculation
The Transport Index (TI) is a single dimensionless number assigned to a Class 7 package, overpack, or freight container to provide radiation exposure control during transport.
Mathematical Formula for TI TI = Maximum radiation dose rate in mSv/h at 1 meter (3.3 ft) from outer surface × 100 \text{TI} = \text{Maximum radiation dose rate in mSv/h at 1 meter (3.3 ft) from outer surface} \times 100 TI = Maximum radiation dose rate in mSv/h at 1 meter (3.3 ft) from outer surface × 100
(Alternatively, TI is equal to the maximum radiation dose rate in mrem/h at 1 meter). The value obtained must be rounded UP to the first decimal place (e.g., 0.12 → 0.2 0.12 \rightarrow 0.2 0.12 → 0.2 ).
Calculation Example: If the maximum radiation level measured 1 meter away from a Type A package surface is 0.025 mSv/h (2.5 mrem/h) : TI = 0.025 × 100 = 2.5 \text{TI} = 0.025 \times 100 = 2.5 TI = 0.025 × 100 = 2.5
Air Transport Limit: The maximum Transport Index permitted for any individual package carried on a passenger or cargo aircraft without Exclusive Use is 10.0 .
Class 7 Package Categorization & Labeling
Every Class 7 package (except Excepted Packages) must be assigned to one of three categories based on surface radiation levels and the Transport Index:
Category Label Transport Index (TI) Maximum Radiation Level at Any Point on External Surface
Category I-WHITE (7-I) TI = 0 \text{TI} = 0 TI = 0 ≤ 0.005 mSv/h \le 0.005\text{ mSv/h} ≤ 0.005 mSv/h ( 0.5 mrem/h 0.5\text{ mrem/h} 0.5 mrem/h )
Category II-YELLOW (7-II) > 0 > 0 > 0 to ≤ 1.0 \le 1.0 ≤ 1.0 > 0.005 mSv/h > 0.005\text{ mSv/h} > 0.005 mSv/h to ≤ 0.5 mSv/h \le 0.5\text{ mSv/h} ≤ 0.5 mSv/h ( 50 mrem/h 50\text{ mrem/h} 50 mrem/h )
Category III-YELLOW (7-III) > 1.0 > 1.0 > 1.0 to ≤ 10.0 \le 10.0 ≤ 10.0 > 0.5 mSv/h > 0.5\text{ mSv/h} > 0.5 mSv/h to ≤ 2.0 mSv/h \le 2.0\text{ mSv/h} ≤ 2.0 mSv/h ( 200 mrem/h 200\text{ mrem/h} 200 mrem/h ) CLASS 7 CATEGORY SELECTION MATRIX
- Surface Radiation Level (mSv/h)
- ▲
- 2.0 │─────────────────────────────────────────────────────────────► EXCLUSIVE USE ONLY
- │ │
- │ │ Category III-YELLOW
- 0.5 │──────────────────────────────┬─────────────────────────────┤
- │ │ │
- │ Category II-YELLOW │ Category III-YELLOW │
- 0.005 ├───┬──────────────────────────┴─────────────────────────────┤
- │ I-│
- └───┴──────────────────────────┬─────────────────────────────► Transport Index (TI)
- 0 1.0 10.0
Note: If the surface radiation level exceeds 2.0 mSv/h (200 mrem/h) or if the TI exceeds 10.0 , the package must be transported under Exclusive Use shipment conditions.