Study guide

Packing Groups (PG I, II, III) & Precedence of Hazards Matrix

IATA Dangerous Goods Regulations Air

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: General Philosophy, Applicability & CBTA Framework

Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods

2 Chapter 2: Dangerous Goods Limitations

Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail

3 Chapter 3: Classification of the 9 Hazard Classes

Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix

4 Chapter 4: Identification & List of Dangerous Goods

Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow

5 Chapter 5: Packing Requirements & UN Specification Packaging

General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650

6 Chapter 6: Marking & Labelling Requirements

DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks

7 Chapter 7: Dangerous Goods Documentation

DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention

8 Chapter 8: Stowage, Handling & Emergency Procedures

Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage

Packing Groups (PG I, II, III) & Precedence of Hazards Matrix

Key Takeaways Explain This Topic AI

Packing Groups indicate the degree of danger presented by a dangerous good: Packing Group I (High Danger), Packing Group II (Medium Danger), and Packing Group III (Low Danger).

Hazard Classes 1 (Explosives), 2 (Gases), 5.2 (Organic Peroxides), 6.2 (Infectious Substances), and 7 (Radioactive Material) do not have Packing Groups assigned, utilizing alternative packaging/category criteria.

When a substance meets criteria for more than one hazard class or division, Table 3.10.A (Precedence of Hazards) is applied to determine the primary hazard class and subsidiary risk(s).

Primary hazards that ALWAYS take precedence over any other hazard include Class 7 (other than excepted packages), Class 1, Class 2, desensitized explosives, Division 4.1 self-reactive substances, Division 4.2 pyrophoric substances, Division 5.2 organic peroxides, Division 6.1 PG I inhalation toxicity, and Division 6.2.

The Precedence of Hazards table determines both the primary class/division and the resulting packing group for multi-hazard mixtures and solutions.

Last updated: August 2026

Packing Groups (PG I, II, III) & Precedence of Hazards Matrix

When classifying dangerous goods for air transport, assigning the correct hazard class is only the first step. Shippers must also determine the Packing Group (PG) to indicate the relative degree of danger and use the Precedence of Hazards Table (Table 3.10.A) whenever a chemical substance, mixture, or solution possesses multiple hazardous properties.

Fundamentals of Packing Groups (PG I, PG II, PG III)

Dangerous goods are assigned to Packing Groups according to the degree of danger they present:

Packing Group I (PG I): High Danger (requires the most robust, stringently tested UN specification packaging).

Packing Group II (PG II): Medium Danger.

  • Packing Group III (PG III): Low Danger (minor danger). PACKING GROUP HIERARCHY
  • ┌─────────────────────────────────┬─────────────────────────────────┬─────────────────────────────────┐
  • │ PACKING GROUP I (PG I) │ PACKING GROUP II (PG II) │ PACKING GROUP III (PG III) │
  • ├─────────────────────────────────┼─────────────────────────────────┼─────────────────────────────────┤
  • │ HIGH DANGER │ MEDIUM DANGER │ LOW DANGER │
  • │ Tested for 1.8 m drop test │ Tested for 1.2 m drop test │ Tested for 0.8 m drop test │
  • │ Packaging symbol: 'X' │ Packaging symbol: 'Y' or 'X' │ Packaging symbol: 'Z', 'Y', 'X' │
  • └─────────────────────────────────┴─────────────────────────────────┴─────────────────────────────────┘
  • Classes and Divisions Without Packing Groups

It is a fundamental rule of IATA DGR classification that not all hazard classes use Packing Groups . The following classes and sub-divisions use specialized classification criteria instead of Packing Groups:

Class 1 (Explosives): Classified by Division (1.1–1.6) and Compatibility Group (A–S) .

Class 2 (Gases): Classified by Division (2.1, 2.2, 2.3) and cylinder pressure/refrigeration specs.

Division 5.2 (Organic Peroxides): Classified by Type (Types A through G) .

Division 6.2 (Infectious Substances): Classified by Category A (UN 2814/2900) or Category B (UN 3373) .

Class 7 (Radioactive Material): Classified by Package Type (Excepted, Type A, B, C) and Category Label (I-WHITE, II-YELLOW, III-YELLOW).

Class 9 (Certain items): Standalone lithium batteries and magnetized materials do not use Packing Groups.

Multi-Hazard Substances & Absolute Precedence Rules

When a substance, mixture, or solution possesses characteristics corresponding to two or more hazard classes, a systematic determination must be performed to identify:

  • The Primary Hazard Class (dictates primary packaging instruction, label, and Shipper's Declaration entry);
  • The Subsidiary Risk(s) (dictates secondary hazard labels and stowage segregation);

The Overall Packing Group .

Absolute Primary Precedence Rules (Overrides)

Under IATA DGR Section 3.10, certain hazards ALWAYS take absolute precedence over any other hazard, regardless of concentration or secondary parameters:

  • Class 7 Radioactive Material (in forms other than excepted packages);
  • Class 1 Explosives ;
  • Class 2 Gases ;
  • Desensitized explosives of Class 3 and Division 4.1;
  • Division 4.1 Self-reactive substances ;
  • Division 4.2 Pyrophoric substances ;
  • Division 5.2 Organic Peroxides ;

Division 6.1 Packing Group I Inhalation Toxicity substances ( V ≥ 10 × L C 50 V \ge 10 \times LC_{50} V ≥ 10 × L C 50 ​ and L C 50 ≤ 1000 mL/m 3 LC_{50} \le 1000\text{ mL/m}^3 L C 50 ​ ≤ 1000 mL/m 3 );

Division 6.2 Infectious Substances .

Everything outside that list — Class 3, Divisions 4.3 and 5.1, the remaining Division 6.1 entries, Class 8 and Class 9 — is resolved through the Table 3.10.A matrix below.

Application of IATA Table 3.10.A (Precedence of Hazards Table)

For multi-hazard substances not covered by absolute precedence overrides, shippers must consult Table 3.10.A (Precedence of Hazards Table) . The matrix intersects the competing classes/divisions and their respective packing groups. The extract below shows how the table reads — always resolve a live classification against the printed Table 3.10.A in the current edition rather than against a summary:

Class & PG Class 3 PG I Class 3 PG II Class 3 PG III Div 6.1 PG I (Oral) Div 6.1 PG II (Oral) Class 8 PG I Class 8 PG II

  • Div 4.1 PG II 3 (PG I) 4.1 (PG II) 4.1 (PG II) 6.1 (PG I) 4.1 (PG II) 8 (PG I) 4.1 (PG II)
  • Div 4.3 PG I 4.3 (PG I) 4.3 (PG I) 4.3 (PG I) 4.3 (PG I) 4.3 (PG I) 4.3 (PG I) 4.3 (PG I)
  • Div 5.1 PG I 5.1 (PG I) 5.1 (PG I) 5.1 (PG I) 5.1 (PG I) 5.1 (PG I) 5.1 (PG I) 5.1 (PG I)
  • Div 6.1 PG II (Oral) 3 (PG I) 3 (PG II) 6.1 (PG II) — — 8 (PG I) 6.1 (PG II)
  • Class 8 PG II 3 (PG I) 3 (PG II) 8 (PG II) 6.1 (PG I) 6.1 (PG II) — —
  • Step-by-Step Practical Examples
  • Example 1: Liquid Mixture with Flammability & Oral Toxicity

Properties: Flash point 15 ∘ C 15^\circ\text{C} 1 5 ∘ C , Initial boiling point 50 ∘ C → 50^\circ\text{C} \rightarrow 5 0 ∘ C → Class 3, PG II .

Toxicity: Acute oral L D 50 = 25 mg/kg → LD_{50} = 25\text{ mg/kg} \rightarrow L D 50 ​ = 25 mg/kg → Division 6.1, PG II (Oral) .

Table 3.10.A Lookup: Intersect Class 3 PG II and Division 6.1 PG II (Oral).

Result: Primary Hazard = Class 3, PG II ; Subsidiary Risk = Division 6.1 .

Proper Shipping Name: Flammable liquid, toxic, n.o.s. ( UN 1992 ).

Example 2: Liquid Mixture with Flammability & High Skin Corrosivity

Properties: Flash point 45 ∘ C 45^\circ\text{C} 4 5 ∘ C , Initial boiling point 110 ∘ C → 110^\circ\text{C} \rightarrow 11 0 ∘ C → Class 3, PG III .

Corrosivity: Full thickness skin destruction at 2 minutes exposure → \rightarrow → Class 8, PG I .

Table 3.10.A Lookup: Intersect Class 3 PG III and Class 8 PG I.

Result: Primary Hazard = Class 8, PG I ; Subsidiary Risk = Class 3 .

Proper Shipping Name: Corrosive liquid, flammable, n.o.s. ( UN 2920 ).