Study guide

Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow

IATA Dangerous Goods Regulations Air

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: General Philosophy, Applicability & CBTA Framework

Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods

2 Chapter 2: Dangerous Goods Limitations

Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail

3 Chapter 3: Classification of the 9 Hazard Classes

Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix

4 Chapter 4: Identification & List of Dangerous Goods

Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow

5 Chapter 5: Packing Requirements & UN Specification Packaging

General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650

6 Chapter 6: Marking & Labelling Requirements

DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks

7 Chapter 7: Dangerous Goods Documentation

DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention

8 Chapter 8: Stowage, Handling & Emergency Procedures

Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage

Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow

Key Takeaways Explain This Topic AI

Section 4.3 is the numerical cross-reference list: it converts a UN or ID number into the Proper Shipping Name and page reference needed to find the entry in the alphabetical Section 4.2 list.

Section 4.2 is ordered alphabetically by Proper Shipping Name, so a shipper who starts from a UN number on a Safety Data Sheet must route through Section 4.3 first.

The complete open-book workflow runs 4.3 or 4.2 to identify, Column M to check special provisions, Columns G/I/K to reach Section 5 for packing, Section 7 for marks and labels, Section 8 for documentation, and Column N for the ERG code.

Every column read must be recorded, because the acceptance checklist re-derives the same values independently and any mismatch rejects the consignment.

Last updated: August 2026

Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow

The IATA DGR certification exam is open book . That format changes what is being assessed: not whether you can recall a limit, but whether you can find the right limit, in the right column, in a manual of roughly a thousand pages, under time pressure. This section covers the navigation subsection candidates most often overlook — Section 4.3 — and then assembles every lookup taught so far into a single repeatable workflow.

1. Why an Alphabetical List Needs a Numerical Index

Section 4.2, the List of Dangerous Goods, is ordered alphabetically by Proper Shipping Name. That works perfectly when you already know the name. It fails completely in the most common real situation, which is that you are holding a Safety Data Sheet whose Section 14 gives you a UN number and little else, or an air waybill quoting UN 1993 with no usable description.

Section 4.3 — the Numerical Cross-Reference List — solves exactly that problem. It lists dangerous goods in UN and ID number order and gives, for each number, the Proper Shipping Name and the page on which the full Section 4.2 entry appears. START: "UN 1263" START: "Paint"

  • | |
  • v |
  • +---------------------------+ |
  • | SECTION 4.3 | |
  • | Numerical Cross-Reference| |
  • | UN 1263 -> Paint, p.xxx | |
  • +---------------------------+ |
  • | |
  • +-------------------+-------------------+
  • |
  • v
  • +-------------------------------+
  • | SECTION 4.2 (Blue Pages) |
  • | Full entry, Columns A - N |
  • +-------------------------------+

One entry in Section 4.2 can carry several packing groups, and a single UN number can appear under more than one Proper Shipping Name variant. Section 4.3 gets you to the right page; Column E of Section 4.2 then tells you which packing group row applies , and the packing group comes from the substance's own test data, not from a guess.

2. The Complete Open-Book Workflow

Every compliant consignment is built by walking the manual in the same fixed order. Learn the order and the exam becomes an exercise in reading rather than recall.

  • Step Where You Look What You Come Away With
  • 1. Classify Section 3 Class or division, subsidiary risk, packing group

2. Identify Section 4.3 (from a number) or Section 4.2 directly (from a name) UN/ID number and Proper Shipping Name

3. Read the entry Section 4.2, Columns A-N Labels (D), PG (E), EQ code (F), the three PI/quantity pairs (G-L), special provisions (M), ERG code (N)

4. Check the special provisions Section 4.4, using the codes in Column M Conditions, prohibitions, reliefs, approval routes such as A1 and A2

5. Check the limitations Section 2, plus Subsections 2.8 and 2.9 Forbidden status, state variations, operator variations

6. Pack Section 5, using the packing instruction from Column G, I or K Inner and outer packagings, quantity limits, additional packing requirements

  • 7. Verify the packaging Section 6 UN specification code, performance level, test standards
  • 8. Mark and label Section 7 PSN, UN number, addresses, hazard labels, handling labels, specific marks
  • 9. Document Section 8 Shipper's Declaration entries, Air Waybill handling information
  • 10. Hand over Section 9 Acceptance checklist, loading, segregation, NOTOC

Two steps are skipped far too often. Step 4 is skipped because Column M looks like a footnote; it is not — it can forbid the shipment, change the quantity, or release it from the Regulations entirely. Step 5 is skipped because the base entry looked permissive; a state or operator variation can still stop the consignment dead.

3. Worked Lookup: From Safety Data Sheet to Declaration

Starting fact: a Safety Data Sheet Section 14 reads "UN 1263, Class 3, PG II" . The customer wants 12 litres in one package, to travel on the first available flight.

Section 4.3 — look up 1263 . It resolves to the Proper Shipping Name Paint (and to the related Paint related material entries) with a page reference into Section 4.2.

Section 4.2 — find the Paint entry and read across the PG II row:

  • Column C: 3 (no subsidiary risk)
  • Column D: Flammable liquid label
  • Column E: II
  • Column F: excepted quantity code
  • Columns G/H: Y341 and its limited-quantity net limit
  • Columns I/J: PI 353, 5 L
  • Columns K/L: PI 364, 60 L
  • Column M: any applicable "A" codes
  • Column N: the ERG code for the NOTOC

Resolve the customer's request. Twelve litres in one package exceeds the 5 L passenger aircraft limit in Column J but sits within the 60 L cargo limit in Column L. The consignment is therefore Cargo Aircraft Only : PI 364 governs, the CAO label goes on the package, and "Cargo Aircraft Only" is endorsed on the declaration and the air waybill. "The first available flight" is no longer an option if that flight is a passenger service.

Section 4.4 — read every code shown in Column M before finalising.

Section 2.8 / 2.9 — confirm nothing in the routing states or the operating carriers restricts the entry further.

Sections 5, 6, 7, 8 — pack to PI 364, verify the UN specification mark, apply marks and labels, and complete the declaration.

Record each column value as you read it. The acceptance agent will re-derive all of them independently from the same manual, and any mismatch between your declaration and their reading rejects the consignment .