Study guide

Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650

IATA Dangerous Goods Regulations Air

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: General Philosophy, Applicability & CBTA Framework

Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods

2 Chapter 2: Dangerous Goods Limitations

Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail

3 Chapter 3: Classification of the 9 Hazard Classes

Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix

4 Chapter 4: Identification & List of Dangerous Goods

Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow

5 Chapter 5: Packing Requirements & UN Specification Packaging

General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650

6 Chapter 6: Marking & Labelling Requirements

DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks

7 Chapter 7: Dangerous Goods Documentation

DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention

8 Chapter 8: Stowage, Handling & Emergency Procedures

Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage

Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650

Key Takeaways Explain This Topic AI

Category A infectious substances (UN 2814, UN 2900, and UN 3549) are packed to Packing Instruction 620, which requires UN specification triple packaging tested to a 9 metre drop and a puncture test.

Category B biological substances (UN 3373) are packed to Packing Instruction 650, which requires triple packaging and a 1.2 metre drop test but no UN specification marking and no Shipper's Declaration.

Both instructions require a leakproof primary receptacle, a leakproof secondary packaging, absorbent material sufficient to take the entire liquid contents, and an itemised list of contents between the secondary and outer packagings.

Every primary receptacle or secondary packaging holding liquid must withstand an internal pressure differential of at least 95 kPa across the range -40°C to +55°C, and the outer packaging must have a minimum dimension of 100 mm.

Last updated: August 2026

Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650

Classifying an infectious substance as Category A or Category B decides which of two very different packing regimes applies. Packing Instruction 620 governs Category A and is one of the most demanding instructions in the manual. Packing Instruction 650 governs Category B and is deliberately accessible, because it is used daily by clinics and laboratories with no dangerous goods specialists on staff. Both are built on the same triple packaging principle.

1. The Triple Packaging Principle

Every infectious substance package, in either category, has three layers: +-----------------------------------------------------------+

  • | OUTER PACKAGING (rigid, min. dimension 100 mm) |
  • | +---------------------------------------------------+ |
  • | | SECONDARY PACKAGING (leakproof, watertight) | |
  • | | +-------------------------------------------+ | |
  • | | | PRIMARY RECEPTACLE (leakproof, watertight)| | |
  • | | | The specimen itself | | |
  • | | +-------------------------------------------+ | |
  • | | Absorbent material: enough to absorb ALL liquid | |
  • | +---------------------------------------------------+ |
  • | Itemised list of contents between secondary and outer |
  • +-----------------------------------------------------------+

Three requirements are common to both instructions and are examined repeatedly:

Absorbent material must sit between the primary receptacle and the secondary packaging, in a quantity sufficient to absorb the entire liquid contents of all primary receptacles.

The primary receptacle or the secondary packaging must withstand an internal pressure differential of not less than 95 kPa , maintained across the temperature range -40°C to +55°C .

The outer packaging must have a minimum external dimension of 100 mm , so that the marks and labels can be read.

An itemised list of contents is enclosed between the secondary packaging and the outer packaging.

2. Packing Instruction 620 — Category A

Category A covers substances capable of causing permanent disability, or life-threatening or fatal disease, in otherwise healthy humans or animals: UN 2814 (affecting humans), UN 2900 (affecting animals only) and UN 3549 (Category A medical waste).

Requirement Packing Instruction 620

Packaging standard UN specification packaging , tested and marked, meeting the Packing Group I performance level

  • Drop test 9 metres
  • Puncture test Required
  • Pressure differential Not less than 95 kPa
  • Quantity limits Restricted per package, with lower limits on passenger aircraft than on cargo aircraft
  • Hazard label Division 6.2 Infectious Substance label
  • Marking UN number and Proper Shipping Name; the technical name of the pathogen where required
  • Shipper's Declaration Required
  • Responsible person Name and telephone number of a responsible person must accompany the consignment

The 9 metre drop test is the figure to remember: it is far above the 1.8 m used for Packing Group I chemical packagings, because the consequence of release is biological rather than chemical.

3. Packing Instruction 650 — Category B

Category B is everything infectious that does not meet the Category A criteria — the routine diagnostic specimen. It is assigned to UN 3373, Biological Substance, Category B .

  • Requirement Packing Instruction 650
  • Packaging standard No UN specification packaging required
  • Drop test 1.2 metres
  • Pressure differential Not less than 95 kPa
  • Outer packaging Rigid, minimum dimension 100 mm
  • Hazard label None — the Division 6.2 hazard label is not used

Marking The UN 3373 diamond-shaped mark with UN 3373 beside it, and the Proper Shipping Name Biological Substance, Category B adjacent to the mark

  • Shipper's Declaration Not required when the consignment fully complies with PI 650
  • Air Waybill Should identify the consignment as UN 3373, Biological Substance, Category B

A PI 650 consignment that fails any condition of the instruction is no longer a PI 650 consignment. It reverts to being fully regulated, which for a Category B substance means it can no longer be offered at all in that condition and must be repacked correctly.

4. Refrigerants and the Common Error

Diagnostic specimens are usually shipped cold, so an infectious substance package very often also contains a refrigerant:

Dry ice (UN 1845) — the outer packaging must permit the release of carbon dioxide gas, and the dry ice must be placed outside the secondary packaging so that the secondary packaging is not crushed as the specimen contracts. The package is marked with the net mass of dry ice and the Class 9 label, and dry ice must be declared on the Air Waybill.

Liquid nitrogen (UN 1977) — additional requirements apply, including the use of a receptacle designed for the temperature and the retention of any liquid.

The most common practical error is packing the coolant inside the secondary packaging. It must sit between the secondary and the outer packaging, with the secondary packaging supported so that it stays in position once the coolant has sublimated or evaporated away.

5. Deciding Between the Two

The decision is made on the classification , never on convenience or cost:

Does the substance meet the Category A criteria — capable of causing permanent disability, life-threatening or fatal disease in otherwise healthy humans or animals? → Category A, UN 2814 / UN 2900 / UN 3549, Packing Instruction 620, full declaration.

If not, is it still known or reasonably expected to contain pathogens? → Category B, UN 3373, Packing Instruction 650, no declaration.

Is it a patient specimen with minimal likelihood of pathogens, or a substance that has been neutralised or is otherwise excluded? → It may fall outside Division 6.2 altogether; verify against the Section 3 exclusions before deciding.