Study guide
DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules)
IATA Dangerous Goods Regulations Air
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: General Philosophy, Applicability & CBTA Framework
Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods
2 Chapter 2: Dangerous Goods Limitations
Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail
3 Chapter 3: Classification of the 9 Hazard Classes
Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix
4 Chapter 4: Identification & List of Dangerous Goods
Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow
5 Chapter 5: Packing Requirements & UN Specification Packaging
General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650
6 Chapter 6: Marking & Labelling Requirements
DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks
7 Chapter 7: Dangerous Goods Documentation
DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention
8 Chapter 8: Stowage, Handling & Emergency Procedures
Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules)
Key Takeaways Explain This Topic AI
Primary hazard labels must be diamond-shaped (square set at a 45-degree angle) measuring at least 100 mm × 100 mm, with a solid line running parallel and 5 mm inside the outer edge.
Subsidiary risk labels are visually identical in size and graphic design to primary hazard labels, but must NOT display the class or division number in the bottom corner under standard IATA DGR rules.
Hazard labels must be affixed to the same surface of the package as the Proper Shipping Name and UN number marking, positioned near the PSN mark whenever package dimensions permit.
Labels must be placed on a background of contrasting color or surrounded by a solid or dotted border line to ensure visibility against dark or pattern-matched outer packagings.
Last updated: August 2026
Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules)
Hazard labelling is the primary visual method used in international air transport to communicate the specific chemical and physical hazard risks posed by dangerous goods. Under IATA DGR Section 7.2 , hazard labels are divided into two functional categories: primary hazard labels (representing the dominant risk of the substance) and subsidiary risk labels (representing secondary or tertiary risks). All hazard labels must adhere to precise geometric, color, and placement specifications to guarantee immediate recognition by airport ramp agents, cabin crew, and emergency response teams.
Technical Specifications for Hazard Labels
Every hazard label applied to an air cargo package must conform strictly to international ISO standards and IATA specifications regarding dimensions, border lines, symbols, and text formatting. +-----------------------------------+
- | /\ |
- | / \ |
- | / \ |
- | / SYMBOL \ |
- | / \ |
- | |<--- 5mm --->| |
- | \ / |
- | \ / |
- | \ CLASS/ |
- | \ NUM / |
- | \ / |
- | \/ |
- +-----------------------------------+
- Standard Dimensions: 100 mm x 100 mm
- Inner Line: 5 mm parallel inside edge
- 1. Shape and Dimensions
Standard Size : Hazard labels must be square set at a 45° angle ( diamond-shaped ) with minimum dimensions of 100 mm × 100 mm .
Reduced Size Allowance : On small packagings or gas cylinders where a 100 mm × 100 mm label cannot fit, dimensions may be reduced to 50 mm × 50 mm , provided all graphics, border lines, and class numbers remain clearly legible and proportional.
Border Line : A solid line must run parallel to the outer edge of the label, positioned 5 mm inside the perimeter.
2. Primary Hazard Labels vs. Subsidiary Risk Labels
Primary Hazard Label : Displays the official hazard symbol in the top half and the hazard class or division number in the lower apex (bottom corner). For example, a Class 3 Flammable Liquid label features a flame symbol at the top and the number "3" at the bottom.
Subsidiary Risk Label : Displays the exact same symbol and background color scheme as the primary label, but under standard IATA DGR rules, it MUST NOT display the class or division number in the bottom corner. This prevents ground handlers from confusing the secondary risk with the primary class rating.
State Variation Exception : Certain country variations (such as United States Department of Transportation / US DOT rules under 49 CFR) permit or require the class number to be displayed on subsidiary risk labels. However, standard IATA DGR international shipments omit the class number on subsidiary labels unless dictated by State variation.
Label Placement Rules & Proximity Guidelines
The placement of hazard labels on a dangerous goods package is governed by rigid proximity guidelines to ensure that all crucial hazard warnings can be viewed simultaneously without rotating the container. Proximity Rule: Label Surface = Proper Shipping Name Surface \text{Proximity Rule: Label Surface} = \text{Proper Shipping Name Surface} Proximity Rule: Label Surface = Proper Shipping Name Surface
Mandatory Placement Rules
Same Surface Rule : Primary hazard labels, subsidiary risk labels, the Proper Shipping Name, and the UN/ID number marking MUST all be located on the same physical surface of the package.
Proximity to PSN : Labels must be affixed immediately adjacent to the Proper Shipping Name marking. The DGR sets no numeric separation distance — the test is that the labels and the shipping name are on the same surface and can be read together without turning the package.
Side-by-Side Application : When a consignment requires both a primary hazard label and one or more subsidiary risk labels, the labels must be positioned next to each other (separated by no more than a few millimeters) on the same package face.
No Overlapping or Folding : Labels must never be folded over package corners or edges, affixed across closures or seams, or covered by adhesive tape, shipping pouches, or overpack straps.
Cylinders and Irregular Shapes : On non-cylindrical or small packages where space is restricted, labels may be attached via a durable tag securely fastened to the container.
Background Contrast & Boundary Requirements
To ensure that hazard labels remain instantly recognizable regardless of the packaging material, IATA DGR Section 7.2 imposes visual contrast requirements:
Contrasting Background : Labels must be affixed to a surface of contrasting color (e.g., a bright yellow Class 5.1 Oxidizer label on a brown corrugated cardboard box).
Boundary Line Requirement : If a hazard label is applied to a background color that matches or closely resembles the background of the label (such as a black label applied to a dark carbon-fiber drum), the label must feature a solid or dotted outer boundary line surrounding the entire diamond perimeter to define its edges.
Summary of Hazard Label Classes & Features
- Hazard Class / Division Symbol & Color Scheme Primary Corner Number Subsidiary Label Rule
- Class 1 (Explosives) Exploding bomb on orange background Division (e.g., 1.4 ) Class number omitted
- Class 2.1 (Flammable Gas) Flame on red background 2 Class number omitted
- Class 3 (Flammable Liquid) Flame on red background 3 Class number omitted
- Class 4.1 (Flammable Solid) Flame on red/white vertical stripes 4 Class number omitted
- Class 5.1 (Oxidizer) Flame over circle on yellow background 5.1 Division omitted
- Division 6.1 (Toxic) Skull and crossbones on white background 6 Class number omitted
- Class 8 (Corrosive) Liquid dripping on hand & metal (black/white) 8 Class number omitted
- Class 9 (Miscellaneous) Seven vertical black stripes on white top half 9 Class number omitted