Study guide
DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks
IATA Dangerous Goods Regulations Air
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: General Philosophy, Applicability & CBTA Framework
Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods
2 Chapter 2: Dangerous Goods Limitations
Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail
3 Chapter 3: Classification of the 9 Hazard Classes
Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix
4 Chapter 4: Identification & List of Dangerous Goods
Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow
5 Chapter 5: Packing Requirements & UN Specification Packaging
General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650
6 Chapter 6: Marking & Labelling Requirements
DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks
7 Chapter 7: Dangerous Goods Documentation
DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention
8 Chapter 8: Stowage, Handling & Emergency Procedures
Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks
Key Takeaways Explain This Topic AI
The Lithium Battery Mark is a square or rectangle with a red hatched border, a stylized battery graphic and the applicable UN number(s); minimum dimensions are 100 mm × 100 mm, reduced to 100 mm × 70 mm where the package requires it.
Recent IATA DGR revisions retired the mandatory telephone number requirement on the Lithium Battery Mark, making phone numbers optional while retaining UN number identification.
The Excepted Quantities mark features a square hatched border with a stylized 'E' enclosed in a circle, requiring the primary hazard class or division number and shipper/consignee contact info.
The Limited Quantities Air mark displays a white diamond with top and bottom black corner points and a bold letter 'Y' in the center, signifying compliance with Section 2.7 air packing instructions.
Last updated: August 2026
Lithium Battery Markings & Excepted Quantity/Limited Quantity Markings
Modern air cargo logistics frequently involves high-volume shipments of consumer electronics, pharmaceutical samples, and small-quantity chemical reagents. To facilitate the safe, streamlined movement of these items, the IATA Dangerous Goods Regulations incorporate simplified marking regimes for Lithium Batteries , Excepted Quantities (EQ) , and Limited Quantities (LQ) . These specialized marks replace standard UN specification packaging codes and full hazard class labels with specific graphical emblems that communicate compliance with reduced-quantity air transport packing instructions.
Lithium Battery Mark Specifications & Regulatory Evolution
Lithium batteries (lithium ion under UN 3480/3481 and lithium metal under UN 3090/3091) represent one of the most common dangerous goods categories in global air freight. The mark is required in two distinct places, and the exam tests the distinction:
Section II of Packing Instructions 966, 967, 969 and 970 — batteries packed with or contained in equipment. The mark is the only hazard communication on the package.
Section IB of Packing Instructions 965 and 968 — standalone cells and batteries. Here the mark is required in addition to the Class 9 lithium battery hazard label and the Cargo Aircraft Only label.
PI 965 and PI 968 no longer have a Section II (removed with the 63rd edition, transition ended 31 March 2022), so there is no such thing as a "Section II standalone lithium battery shipment" and no mark-only route for UN 3480 or UN 3090. +---------------------------------------------------+
- | * * * * * * * * * * * * * * * * * * * * * * * * * |
- | * * |
- | * [ GRAPHIC: BATTERY GROUP WITH ONE * |
- | * DAMAGED/FLAMING CELL & INTACT CELL ] * |
- | * * |
- | * UN 3481 * |
- | * * |
- | * * * * * * * * * * * * * * * * * * * * * * * * * |
- +---------------------------------------------------+
- Border: Red Hatched Border (Minimum 5 mm wide)
- Standard Size: 100 mm x 100 mm (Reduced: 100 x 70 mm)
- Technical Design Requirements
Hatched Border : The mark must feature a square or rectangular border with red diagonal hatching. The hatching width must be at least 5 mm .
Central Battery Graphic : A stylized icon depicting a group of batteries, with one battery cell damaged and emitting flames alongside intact cells.
UN Number Identification : The UN number(s) preceded by the letters "UN" (e.g., UN 3481 for lithium ion batteries packed with equipment) must be clearly printed within the mark.
Dimensions : The mark must be a rectangle or square with minimum dimensions of 100 mm wide × 100 mm high . Where the package size requires it, the dimensions and line thickness may be reduced to not less than 100 mm wide × 70 mm high .
Legacy mark : The previous rectangular mark of 120 mm × 110 mm (reduced size 105 mm × 74 mm ) may continue to be used, so both designs are compliant and both may appear in exam illustrations.
Regulatory Evolution: Retirement of Telephone Number
Important IATA DGR Revision : In previous editions of the DGR, the Lithium Battery Mark required a mandatory telephone number for additional information. Recent revisions to the IATA DGR retired the mandatory telephone number requirement , making telephone contact numbers optional. Today, compliant marks focus exclusively on the red hatched border, battery graphic, and clear UN number identification.
Excepted Quantities (EQ) Package Mark
Dangerous goods shipped under the Excepted Quantities provisions of IATA DGR Section 2.6 (very small quantities such as 1 mL or 1 g inner packagings) are exempt from formal UN packaging specs, shipper's declarations, and standard hazard labels. However, the outer package MUST display the Excepted Quantities Mark . +---------------------------------------------------+
- | * * * * * * * * * * * * * * * * * * * * * * * * * |
- | * * |
- | * ( E ) * |
- | * * |
- | * Class 3 * |
- | * * |
- | * * * * * * * * * * * * * * * * * * * * * * * * * |
- +---------------------------------------------------+
- Border: Red or Black Hatched Border (100 mm x 100 mm)
- Central Symbol: Circle enclosing stylized 'E'
- Text Below: Primary Hazard Class/Division Number
- Key Elements of the EQ Mark
Border : Red or black hatched square border, minimum 100 mm × 100 mm .
Circled 'E' Emblem : A stylized letter "E" enclosed inside a solid circle.
Hazard Class Number : The primary hazard class or division number(s) of the dangerous goods must be printed below the circled 'E' (e.g., Class 3 or Division 6.1 ).
Shipper / Consignee Info : The name and physical address of the shipper or consignee must be marked on the package if not displayed elsewhere.
Limited Quantities (LQ) Air Transport Mark
Small-quantity consignments prepared under IATA DGR Section 2.7 (Limited Quantities) benefit from combined inner packaging exemptions while utilizing robust consumer-grade outer packagings. Packages shipped under LQ provisions by air must display the Limited Quantities Air Mark . /\
- / \
- /TOP \
- /BLACK \
- /CORNER \
- / \ / \
- / \/ \
- / Y \
- / /\ \
- / / \ \
- /BOTTOM \/ RIGHT \
- / BLACK BLACK \
- / CORNER CORNER \
- /__________________________\
- Standard Diamond Size: 100 mm x 100 mm
- Distinguishing Feature: BOLD 'Y' IN CENTER
- Distinguishing Feature: The Central 'Y' Symbol
Air Transport vs. Ground Transport : Ground transport (ADR/DOT) limited quantity marks feature a simple diamond with black top and bottom points and a white center. Air transport Limited Quantity marks MUST display a bold letter 'Y' in the center of the diamond .
Significance of 'Y' : The 'Y' symbol certifies that the package complies with the "Y" packing instruction shown in Column G of Table 4.2 (e.g., Y341), including the 1.2 m drop test and the 24-hour stacking test.
Dimensions : Diamond shape set at 45° with minimum dimensions of 100 mm × 100 mm and a border line width of at least 2 mm. Reduced dimensions of 50 mm × 50 mm are permitted on small packages.
Comparison of Specialized Exception Marks
Mark Type Primary Graphic Mandatory Text / Code Minimum Dimensions Applicable DGR Section
Lithium Battery Mark Damaged & intact battery graphic UN Number (e.g., UN 3481) 100 mm × 100 mm (or 100 × 70 mm) Section 7.1.5.5
Excepted Quantities (EQ) Circled letter 'E' in hatched border Primary Class/Division number 100 mm × 100 mm Section 2.6.7
Limited Quantities (LQ) White diamond, black top/bottom points Bold central letter 'Y' 100 mm × 100 mm (or 50 × 50 mm) Section 2.7.6