Study guide

DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules

IATA Dangerous Goods Regulations Air

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: General Philosophy, Applicability & CBTA Framework

Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods

2 Chapter 2: Dangerous Goods Limitations

Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail

3 Chapter 3: Classification of the 9 Hazard Classes

Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix

4 Chapter 4: Identification & List of Dangerous Goods

Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow

5 Chapter 5: Packing Requirements & UN Specification Packaging

General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650

6 Chapter 6: Marking & Labelling Requirements

DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks

7 Chapter 7: Dangerous Goods Documentation

DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention

8 Chapter 8: Stowage, Handling & Emergency Procedures

Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage

DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules

Key Takeaways Explain This Topic AI

Under IATA DGR Section 8, the Shipper's Declaration for Dangerous Goods (SDDG) is a legally binding document that must be completed in English, printed in duplicate, and feature a distinctive red-hatched border unless authorized otherwise.

The Aircraft Limitations section requires explicit deletion of non-applicable transport modes: striking out 'Cargo Aircraft Only' permits carriage on passenger and cargo aircraft, whereas striking out 'Passenger and Cargo Aircraft' restricts transport strictly to cargo aircraft.

The Nature and Quantity of Dangerous Goods section mandates a rigid column sequence: UN/ID number, Proper Shipping Name, Class or Division (with Subsidiary Risk in brackets), Packing Group in Roman numerals (I, II, III), quantity and package type, Packing Instruction number, and Special Provisions.

Additional Handling Information must contain 24-hour emergency response contact details (where required by State variations), overpack details, dry ice data, and the shipper's signed certification statement with date.

Last updated: August 2026

Shipper's Declaration for Dangerous Goods (SDDG) — Structure & Completion Rules

The Shipper's Declaration for Dangerous Goods (SDDG) is the primary legal document governing the transport of hazardous materials by air under IATA Dangerous Goods Regulations (DGR) Section 8 . By executing the SDDG, the shipper legally certifies that the consignment has been fully identified, classified, packaged, marked, labeled, and prepared in absolute compliance with applicable civil aviation regulations and IATA standards. Air carriers and ground handling agents rely on the accuracy of this declaration to assess aircraft compatibility, calculate weight and balance, assign cargo holds, and prepare emergency response documentation.

Under international aviation law, offering dangerous goods for air transport with an inaccurate, incomplete, or fraudulent declaration constitutes a severe regulatory violation. Consequently, strict completion rules dictate every field, column entry, strikeout rule, and signature line on the standardized SDDG form.

Physical Document Format & General Requirements

To ensure immediate visual recognition across global air transport hubs, the physical SDDG document must satisfy specific standardized design and language criteria. +-------------------------------------------------------------------------+

  • | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |
  • | | | |
  • | | SHIPPER'S DECLARATION FOR DANGEROUS GOODS | |
  • | | | |
  • | | SHIPPER: | |
  • | | Apex Chemical Technologies LLC | |
  • | | 1200 Industrial Parkway, Suite 400 | |
  • | | Houston, TX 77001 USA | |
  • | | | |
  • | | CONSIGNEE: | |
  • | | EuroLab Research Facilities GmbH | |
  • | | Flughafenstrasse 85 | |
  • | | 60549 Frankfurt, Germany | |
  • | | | |
  • | | AIR WAYBILL NO: 125-98765432 PAGE 1 OF 1 | |
  • | | | |
  • | | TRANSPORT DETAILS: | |
  • | | Airport of Departure: IAH Airport of Destination: FRA | |
  • | | | |
  • | | SHIPMENT TYPE: [NON-RADIOACTIVE] / [RADIOACTIVE] | |
  • | | LIMITATIONS: [PASSENGER AND CARGO AIRCRAFT] / [CARGO AIRCRAFT]|
  • | | | |
  • | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |
  • +-------------------------------------------------------------------------+
  • 1. Red Hatched Border ( Red Hatching )

The standard SDDG form features a distinctive red-hatched (candy-stripe) border along its left and right vertical margins. This visual border alerts cargo acceptance staff and flight crews that hazardous cargo is present.

Black-and-white / Monochrome Forms : Printed forms without red hatching are permissible only when specifically authorized by State variations or written operator approvals (e.g., electronic SDDG systems that generate monochrome hard copies).

2. Language Requirement

All entries on the SDDG must be completed in English .

While the State of Origin may require its national language in addition to English, English remains mandatory for international air carriage.

3. Number of Copies

The shipper must complete and sign at least two identical copies of the SDDG:

Operator Origin Copy : Retained by the accepting carrier at the airport of origin for administrative and regulatory audit archives.

Transport Copy : Accompanies the shipment in the document pouch to the final destination.

Header & Administrative Information Fields

The upper section of the declaration captures critical administrative metadata linking the shipper, recipient, airway bill, and operational limits.

Field Name Regulatory Requirement Formatting & Completion Rules

Shipper Full Legal Identity Must list the full name and physical address of the shipper (consignor). A post office box alone does not satisfy the requirement.

Consignee Full Recipient Identity Must list the full physical address of the recipient; a P.O. Box alone is not sufficient.

Air Waybill Number Contract Reference Optional for the shipper at completion; can be entered by the shipper, freight forwarder, or carrier agent upon cargo booking.

Page X of Y Sequential Pagination Mandatory pagination showing current page number and total pages (e.g., Page 1 of 1 or Page 1 of 2 ).

Airport of Departure Flight Routing Optional entry for airport of origin 3-letter IATA code or full name.

Airport of Destination Flight Routing Optional entry for final destination airport.

Aircraft Limitations & Shipment Type Deletion Rules

A critical legal requirement on the SDDG is the strict application of deletion rules across pre-printed transport choice boxes. Failure to correctly strike out non-applicable options renders the declaration null and void. CORRECT DELETION FOR PASSENGER & CARGO FLIGHT:

PASSENGER AND CARGO AIRCRAFT / CARGO AIRCRAFT ONLY <-- (Striking out CAO permits Passenger flights)

CORRECT DELETION FOR CARGO AIRCRAFT ONLY (CAO) FLIGHT:

  • PASSENGER AND CARGO AIRCRAFT / CARGO AIRCRAFT ONLY <-- (Striking out Passenger permits CAO flights)
  • 1. Aircraft Limitations Block

The form presents two options: PASSENGER AND CARGO AIRCRAFT and CARGO AIRCRAFT ONLY .

Passenger Carriage : To ship on passenger aircraft, the shipper must strike out / draw a single line through CARGO AIRCRAFT ONLY . This indicates the cargo complies with strict passenger quantity limitations.

Cargo Aircraft Only (CAO) : To ship on cargo-only aircraft (required when package quantities exceed passenger limits or substance is CAO-restricted), the shipper must strike out PASSENGER AND CARGO AIRCRAFT .

2. Shipment Type Block

The form presents two choices: NON-RADIOACTIVE and RADIOACTIVE .

For standard chemical and industrial dangerous goods (Classes 1–6, 8, 9), the shipper must strike out RADIOACTIVE .

For Class 7 radioactive materials, the shipper must strike out NON-RADIOACTIVE .

Forbidden Practice : Combining radioactive and non-radioactive dangerous goods on a single line entry or single declaration form is strictly prohibited unless specifically authorized under DGR Section 8.1.6.

Nature and Quantity of Dangerous Goods (the tabular grid)

The core of the SDDG consists of a structured tabular grid detailing the hazardous contents. Information must be entered in exact column sequence without alteration. Sequence: UN Number → Proper Shipping Name → Class/Div → Sub Risk → Packing Group \text{Sequence: UN Number} \rightarrow \text{Proper Shipping Name} \rightarrow \text{Class/Div} \rightarrow \text{Sub Risk} \rightarrow \text{Packing Group} Sequence: UN Number → Proper Shipping Name → Class/Div → Sub Risk → Packing Group

Detailed Breakdown of Mandatory Columns

Column No. Column Header Mandated Format & Rules

1 UN or ID Number Must display the 4-digit United Nations number prefixed with UN (e.g., UN 1090 ) or temporary identification number prefixed with ID (e.g., ID 8000 ).

2 Proper Shipping Name Must reproduce the bold-type text of Table 4.2 Column B. Capitalisation is not prescribed — the selection test is typeface, not case. Technical names in parentheses must be added when the entry is marked with a star ( ⋆ \star ⋆ ) in Table 4.2 (e.g., Paint (contains xylene) ).

3 Class or Division Numerical primary hazard class or division number (e.g., 3 , 6.1 , 8 ).

4 Subsidiary Risk Secondary hazard division, which must be enclosed in brackets/parentheses (e.g., (6.1) or (8) ). If no subsidiary risk exists, this space is left blank.

5 Packing Group Degree of danger expressed strictly in Roman Numerals : I (Great Danger), II (Medium Danger), or III (Minor Danger). Omitted for Class 2, Class 7, Division 6.2, and self-reactives.

6 Quantity and Type of Packing Number and description of outer packagings, plus net quantity per package (e.g., 1 fibreboard box x 10 L or 2 steel drums x 25 kg ). Gross mass must be indicated when mandated by DGR (e.g., Class 1, ID 8000).

7 Packing Instruction Applicable 3-digit IATA Packing Instruction number (e.g., 353 , 852 , 954 ). Must prefix with Y for Limited Quantities (e.g., Y344 ).

8 Authorization / Special Provisions Applicable special provision codes and approval references. The DGR requires the following codes to be shown on the declaration when they apply: A1, A2, A4, A5, A51, A81, A88, A99, A130, A190, A191, A201, A202, A211, A212 and A331 . Also used for "Limited Quantity", overpack notes, and competent-authority approval references.

Additional Handling Information & Shipper Certification

Below the tabular grid, the shipper must record special operational directives and execute the legal signature.

1. Emergency Contact Phone Number

Under specific State variations — notably USG-12 for shipments to, from, within, or transiting the United States, and FRG-07 for France — a 24-hour emergency response telephone number must be entered in the Additional Handling Information box (see DGR 8.1.6.11). Some operators impose the same requirement through an operator variation, such as Japan Airlines' JL-11 .

The phone number must include full international area codes and connect directly to a person or service knowledgeable about the emergency response details of the hazardous material.

2. Mandatory Handling Statements

Overpacks : If an overpack is used, the statement Overpack Used must be recorded, listing package counts and numbers.

Dry Ice : When solid carbon dioxide is included as a refrigerant, details must specify: UN 1845, Dry Ice, 9, 1 x 15 kg net mass .

Cargo Aircraft Only Directive : If the shipment is restricted to cargo aircraft, the box must clearly note Cargo Aircraft Only or CAO handling instructions.

3. Shipper Certification Signature & Date

Declaration Text : Pre-printed certification declaring that the contents are fully accurately described, classified, packaged, marked, and labeled.

Shipper's Name : Printed full name of the authorized shipper representative.

Date : Date of execution displaying day, month, and year (e.g., 11 August 2026 ).

Signature : Legitimate physical handwritten signature, stamped signature, or validated electronic signature in compliance with the e-DGD criteria.

Summary of SDDG Completion Standards

  • Section / Block Mandatory Format Common Error to Avoid
  • Border Red hatched vertical borders Printing monochrome copies without State/operator approval
  • Aircraft Limits Strike out non-applicable option Leaving both options un-struck or striking out both options
  • Sub Risk Enclosed in brackets e.g., (6.1) Writing subsidiary risks without parentheses
  • Packing Group Roman numerals I , II , III Writing Arabic numerals ( 1 , 2 , 3 ) or lowercase letters
  • Signature Name, date, and valid signature Omission of physical/digital signature or date