Study guide
Cargo Acceptance Checks & Acceptance Checklist Verification
IATA Dangerous Goods Regulations Air
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: General Philosophy, Applicability & CBTA Framework
Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods
2 Chapter 2: Dangerous Goods Limitations
Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail
3 Chapter 3: Classification of the 9 Hazard Classes
Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix
4 Chapter 4: Identification & List of Dangerous Goods
Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow
5 Chapter 5: Packing Requirements & UN Specification Packaging
General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650
6 Chapter 6: Marking & Labelling Requirements
DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks
7 Chapter 7: Dangerous Goods Documentation
DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention
8 Chapter 8: Stowage, Handling & Emergency Procedures
Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
Cargo Acceptance Checks & Acceptance Checklist Verification
Key Takeaways Explain This Topic AI
Dangerous goods acceptance under IATA DGR Section 9.1 is the final critical safety barrier before hazardous cargo enters the commercial air transport system.
Acceptance staff must complete a two-step verification process—document inspection and physical package inspection—using the standardized IATA Acceptance Checklist.
Packages showing signs of leakage, structural damage, unapproved overpacks, missing hazard labels, or incorrect UN specification markings must be formally rejected.
Accepted consignment records, including the signed acceptance checklist, Shipper's Declaration, and Air Waybill, must be retained for at least three months, or longer where the National Civil Aviation Authority requires it.
Last updated: August 2026
Cargo Acceptance Checks & Acceptance Checklist Verification
The air transport of dangerous goods depends on a rigorous, non-delegable acceptance verification process executed at the carrier's cargo acceptance counter or freight handling facility. Under IATA Dangerous Goods Regulations (DGR) Section 9.1 and ICAO Technical Instructions Part 7, Chapter 1 , an air operator must not accept a dangerous goods consignment for carriage by air unless the package, overpack, or freight container has been inspected, verified, and accepted in accordance with strict regulatory standards. The cargo acceptance check serves as the ultimate operational safeguard preventing unsafe, non-compliant, or improperly documented hazardous materials from entering an aircraft lower hold or main deck.
1. Statutory Basis of Operator Acceptance (DGR Section 9.1)
While shippers bear legal responsibility for correctly classifying, packaging, marking, labelling, and declaring dangerous goods (DGR Section 1.3), the accepting operator assumes statutory legal liability once cargo is received into the carrier's custody. Acceptance staff act as certified gatekeepers. Under Competency-Based Training and Assessment (CBTA) guidelines (DGR Section 1.5), personnel performing dangerous goods acceptance must be trained and assessed against Function 7.3 (previously covered under Categories 3 and 6), with recurrent training every 24 months.
The Mandatory Non-Delegable Standard
Universal Acceptance Mandate : An operator must not accept any dangerous goods package or overpack unless it is accompanied by two completed, signed copies of the Shipper's Declaration for Dangerous Goods (unless exempted, such as standalone dry ice or excepted quantities) and the physical package satisfies all structural and marking requirements.
Use of Standardized Acceptance Checklists : DGR Section 9.1.3 mandates that operators utilize a formal, written Dangerous Goods Acceptance Checklist . IATA publishes standard checklists for dangerous goods consignments, dry ice shipments, and radioactive materials. Operators may develop proprietary checklists, provided they contain all verification items set forth in the IATA standard.
2. The Two-Step Acceptance Verification Architecture
The acceptance verification workflow is strictly divided into two sequential phases: Document Inspection and Physical Package Inspection . +---------------------------------------------------------------------------------+
- | CARGO ACCEPTANCE WORKFLOW (DGR 9.1) |
- +---------------------------------------------------------------------------------+
- |
- v
- +---------------------------------------------------------------------------------+
- | PHASE 1: DOCUMENT INSPECTION |
- | - Verify 2 copies of Shipper's Declaration (Format, Red Hatching, Language) |
- | - Check UN Number, Proper Shipping Name, Class/Division, Packing Group |
- | - Cross-check Quantity per Package against DGR Table 4.2 Limits |
- | - Validate 24-hr Emergency Response Phone Number (USG-12 if applicable) |
- | - Confirm Shipper's Signature and Date |
- +---------------------------------------------------------------------------------+
- |
- [ PASSES? ]
- / \
- (YES)/ \(NO) --> [ REJECT CONSIGNMENT ]
- / \
- v v
- +-------------------------------------------------+ +----------------------------+
- | PHASE 2: PHYSICAL PACKAGE INSPECTION | | ISSUE FORMAL REJECTION |
- | - Inspect for leaks, bulges, crush damage | | NOTICE (DGR 9.1.4) |
- | - Verify UN Specification Markings (e.g. 4G/Y) | | - Log rejection reason |
- | - Check Hazard & Subsidiary Risk Labels | | - Segregate cargo |
- | - Validate Orientation Arrows ("THIS SIDE UP") | | - Notify shipper/forwarder |
- | - Inspect Overpack integrity & markings | +----------------------------+
- +-------------------------------------------------+
- |
- [ PASSES? ]
- / \
- (YES)/ \(NO) --> [ REJECT CONSIGNMENT ]
- /
- v
- +-------------------------------------------------+
- | ACCEPTANCE COMPLETE |
- | - Sign & Date Acceptance Checklist |
- | - Attach DG Label to Air Waybill (AWB) |
- | - Retain Records (Minimum 3 Months) |
- +-------------------------------------------------+
- Phase 1: Document Inspection (Shipper's Declaration Verification)
Acceptance personnel must thoroughly review the Shipper's Declaration for technical accuracy before touching the physical packages:
Document Format & Red Border : The Shipper's Declaration must feature distinct candy-striped red border hatching along both vertical margins (unless printed digitally via approved electronic data interchange / e-DGD protocols).
Full Address Details : Full names and addresses of both the shipper (consignor) and recipient (consignee) must match the Air Waybill exactly.
Air Waybill Number & Departure/Destination : The Air Waybill number, airport of departure, and airport of destination must be fully recorded.
Transport Details (PAX vs. CAO) : Verification of whether the consignment is restricted to Cargo Aircraft Only or permitted on Passenger and Cargo Aircraft. The corresponding selection box must be marked.
Dangerous Goods Description Sequence : The fundamental core declaration must follow the mandatory UN sequence without abbreviation:
UN Number (preceded by "UN", e.g., UN 1090 )
Proper Shipping Name (supplemented by technical names in parentheses for generic/N.O.S. entries, e.g., Acetone or Paint (contains Xylene) )
- Class or Division (and subsidiary risks in parentheses, e.g., 3 or 8 (6.1) )
- Packing Group (Roman numerals I , II , or III )
Quantity and Type of Packaging : Exact number of packages and net mass or liquid volume per package (e.g., 1 steel drum x 200 L ).
Packing Instruction Number : Exact numerical Packing Instruction from DGR Section 5 (e.g., 355 , Y344 , 965 ).
Special Handling & Emergency Phone Numbers : Compliance with State Variations such as USG-12 (24-hour emergency response telephone number, including the international access code, for consignments to, from, within or transiting the United States) and any equivalent operator requirement.
Signature and Date : Original or authorized digital signature of the shipper or their designated agent.
Phase 2: Physical Package Inspection
Upon successful document verification, acceptance staff must conduct a comprehensive physical audit of every individual package:
Inspection Item Acceptance Verification Requirement Common Discrepancy / Failure Mode
Package Integrity Outer packaging must be free of leaks, stains, bulges, tears, punctures, or compromised closures. Liquid dampness at seams; crushed corrugated box corners.
UN Specification Marking Standard UN packaging code (e.g., UN 4G/Y25/S/26/USA/+AA1234 ) cleanly stamped or printed. Faded code; PG mass limit exceeded (e.g., package weight 30 kg vs code rating Y25).
Proper Shipping Name & UN Code Text marking on package must match Shipper's Declaration letter-for-letter. PSN missing technical name for N.O.S. entry; UN number lacking "UN" prefix.
Hazard & Sub-Risk Labels Primary and subsidiary risk labels affixed to same surface near PSN. Must be diamond 100x100 mm. Labels folded over package edges; labels peeling or obscured by tape.
Orientation Arrows Package Orientation labels ("THIS SIDE UP") affixed on two opposite vertical sides for liquid containers. Orientation arrows inverted; arrows affixed to top or bottom surfaces.
Handling Labels Cargo Aircraft Only (CAO), Cryogenic Liquid, or Magnetized Material labels applied where required. CAO label missing on shipment declared CAO on Shipper's Declaration.
- 3. Special Acceptance Protocols: Overpacks, Dry Ice & Hidden Goods
- Overpack Acceptance Verification
An overpack is an enclosure used by a single shipper to combine one or more packages into a single handling unit (e.g., shrink-wrapped pallet or wooden crate). During acceptance, staff must verify:
All UN specification markings, hazard labels, and proper shipping names on enclosed packages must be clearly visible from the exterior OR reproduced on the outside of the overpack.
If inner package markings are obscured, the word "OVERPACK" must be marked on the exterior in lettering at least 12 mm high.
The total net quantity declared on the Shipper's Declaration must equal the sum of the inner packages.
Incompatible dangerous goods requiring segregation under DGR Table 9.3.A must NOT be enclosed within the same overpack.
Dry Ice (UN 1845) Acceptance
Dry ice (solid carbon dioxide) sublimes into asphyxiating C O 2 CO_2 C O 2 gas at ambient temperatures (-78.5°C). When accepting dry ice consignments:
The packaging must allow the release of carbon dioxide gas to prevent dangerous pressure buildup and explosion of the outer container.
The package must be marked with UN 1845 , Carbon dioxide, solid (or Dry ice ), Class 9 hazard label, and the net mass of dry ice in kilograms .
When dry ice is used as a refrigerant for non-dangerous goods (e.g., diagnostic specimens or frozen food), a Shipper's Declaration is not required, but an Air Waybill entry specifying net weight and package count is mandatory.
Detection of Hidden Dangerous Goods
Acceptance personnel must remain vigilant for undeclared dangerous goods hidden within general cargo. Common cargo descriptions masking hazardous materials include:
Aircraft Spare Parts / AOG : May contain explosives (flares, squibs), fire extinguishers, oxygen generators, or fuel system components.
Drilling & Mining Equipment : May contain radioactive sources, corrosive acids, or compressed gases.
Medical Supplies & Diagnostic Kits : May contain flammable solvents, toxic reagents, infectious substances, or dry ice.
Automotive & Racing Parts : May contain wet spillable batteries, fuel residues, shocks containing compressed nitrogen, or airbag inflators.
- 4. Rejection Workflow & Record Retention Mandates
- Consignment Rejection Protocol (DGR 9.1.4)
If any item on the IATA Acceptance Checklist fails verification, the consignment must be immediately rejected:
Stop Processing : Immediately halt acceptance processing. Do not sign or stamp the Shipper's Declaration or Air Waybill.
Issue Written Rejection Notice : Provide a completed copy of the rejection checklist detailing every specific non-compliance reason to the shipper or freight forwarder.
Isolate Cargo : Move the non-compliant cargo to a designated secure quarantine holding area to prevent unauthorized movement or loading.
Discrepancy Logging : Log the rejection event in the operator's safety management system (SMS) database.
Retention of Acceptance Records (DGR 9.1.5)
Operators must retain completed acceptance documentation for regulatory compliance audits:
Minimum Retention Period : At least 3 months from the date of flight departure, or longer as mandated by National Civil Aviation Authorities (NCAAs).
National Rules May Be Longer : Several National Civil Aviation Authorities impose retention periods that exceed the DGR baseline. Check the applicable national rule for the State of the Operator rather than assuming the three-month DGR minimum is always sufficient.
Retained Documents : A copy of the signed Acceptance Checklist, Shipper's Declaration, Air Waybill, and NOTOC must be accessible for inspection by aviation safety inspectors upon request.