Study guide
Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
IATA Dangerous Goods Regulations Air
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: General Philosophy, Applicability & CBTA Framework
Legal Basis & International Regulatory Framework Shipper & Operator Responsibilities in Air Transport Competency-Based Training & Assessment (CBTA) & Certification Categories Dangerous Goods Security & High Consequence Dangerous Goods
2 Chapter 2: Dangerous Goods Limitations
Forbidden Dangerous Goods & Hidden Dangerous Goods Recognition Passenger & Crew Baggage Provisions (Section 2.3 Provisions Table) State Variations & Operator Variations (Sections 2.8 and 2.9) Excepted Quantities (EQ) & Limited Quantities (LQ) Provisions Operators' Own Property (COMAT) & Dangerous Goods in Air Mail
3 Chapter 3: Classification of the 9 Hazard Classes
Class 1 (Explosives) & Class 2 (Gases) Classification Class 3 (Flammable Liquids) & Class 4 (Flammable Solids, Spontaneous Combustibles, Dangerous When Wet) Class 5 (Oxidizing Substances & Organic Peroxides) & Class 6 (Toxic & Infectious Substances) Class 7 (Radioactive Material) Basics, Activity Limits & Radiation Protection Class 8 (Corrosives) & Class 9 (Miscellaneous Dangerous Goods & Environmentally Hazardous) Packing Groups (PG I, II, III) & Precedence of Hazards Matrix
4 Chapter 4: Identification & List of Dangerous Goods
Navigating Section 4.2 (Blue Pages & Table Columns A–N) Proper Shipping Names, UN/ID Numbers & Technical Name Rules Special Provisions (Section 4.4) & Mixture/Solution Rules Lithium Batteries Identification & Classification (UN 3090, 3091, 3480, 3481) Section 4.3 Numerical Cross-Reference & the End-to-End Lookup Workflow
5 Chapter 5: Packing Requirements & UN Specification Packaging
General Packing Requirements, Single vs. Combination Packaging & Ullage Rules Packing Instructions (PI) Selection & Quantity Limitations UN Specification Packaging Codes & Performance Tests (Drop, Stacking, Hydraulic Pressure) Overpacks, Salvage Packaging & Pressure Differential Standards Dry Ice, Consumer Commodity (ID 8000) & Class-Specific Packing Provisions Infectious Substances in Practice: Packing Instruction 620 and Packing Instruction 650
6 Chapter 6: Marking & Labelling Requirements
DGR 7.1 — Package Marking Requirements DGR 7.2 — Hazard Class & Subsidiary Risk Labels (Specifications & Placement Rules) DGR 7.2 — Handling Labels (Cargo Aircraft Only, Orientation Arrows, Magnetized Material, Cryogenic) DGR 7.1 — Lithium Battery, Excepted Quantity & Limited Quantity Marks
7 Chapter 7: Dangerous Goods Documentation
DGR 8.1 — Shipper's Declaration for Dangerous Goods (SDDG): Structure & Completion Rules DGR 8.2 — Air Waybill Handling Information & Non-Dangerous Goods Declarations DGR Section 8 — Electronic Shipper's Declaration (e-DGD) & Documentation Retention
8 Chapter 8: Stowage, Handling & Emergency Procedures
Cargo Acceptance Checks & Acceptance Checklist Verification Loading Limitations, Cargo Aircraft Only (CAO) & ULD Rules Segregation & Incompatibility Rules (Table 9.3.A Segregation Matrix) Notification to Captain (NOTOC) & Pilot-in-Command Information Dangerous Goods Incidents, Reporting & Emergency Response Procedures Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
Key Takeaways Explain This Topic AI
Class 7 radioactive material has its own self-contained chapter, Section 10 of the IATA DGR, which carries the packing, marking, labelling, documentation and stowage rules that other classes take from Sections 5 through 9.
Category I-WHITE, II-YELLOW and III-YELLOW labels must show the contents, the activity, and — for the two YELLOW categories — the Transport Index, entered by the shipper on the label itself.
The sum of the Transport Indexes carried together must not exceed 50 on a passenger aircraft or 200 on a cargo aircraft, and the pilot-in-command verifies these totals against the NOTOC.
Radioactive packages must be separated from people and from undeveloped photographic film using the separation distance tables in Section 9, since exposure accumulates over the whole flight.
Last updated: August 2026
Class 7 Radioactive Material: Section 10 Packing, Labelling, Documentation & Stowage
Every other hazard class draws its packing rules from Section 5, its packaging specifications from Section 6, its marks and labels from Section 7, and its documentation from Section 8. Class 7 does not. Radioactive material has a dedicated chapter — Section 10 — that carries all of those requirements in one place, because the hazard is radiological rather than chemical and the controls are built on standards developed by the International Atomic Energy Agency (IAEA) .
If you take one navigation habit from this section, take this one: when the entry is Class 7, go to Section 10 first.
1. What Section 10 Contains
- Topic Where it sits for other classes Where it sits for Class 7
- General requirements and definitions Sections 1 and 3 Section 10
- Packing instructions Section 5 Section 10
- Package design and approval Section 6 Section 10, plus competent authority approval certificates
- Marking and labelling Section 7 Section 10
- Documentation Section 8 Section 10, plus the Section 8 declaration
- Stowage and separation Section 9 Section 9, using the Class 7 separation tables
- 2. Completing the Category Labels
The three category labels — I-WHITE , II-YELLOW and III-YELLOW — are not simply applied; the shipper must write information onto them . Each label carries entry boxes:
Contents : the name or symbol of the radionuclide (for example Co-60 , I-131 , Tc-99m ).
Activity : the maximum activity of the radioactive contents during transport, expressed in becquerels with the appropriate SI prefix ( GBq , TBq ).
Transport Index : entered on Category II-YELLOW and Category III-YELLOW labels only . A Category I-WHITE label has no Transport Index box , because a I-WHITE package by definition has a Transport Index of zero.
Two category labels must be affixed, on opposite sides of the package. Where the package also has a subsidiary risk — a radioactive material that is also corrosive or flammable, for example — the subsidiary risk label is applied as well.
Frequent error: leaving the Transport Index box blank on a YELLOW label, or writing a Transport Index onto a I-WHITE label. Both are rejection items on the radioactive acceptance checklist.
3. Transport Index Totals and Aircraft Limits
The Transport Index is a radiation-control budget , and it is additive. A single package with a low Transport Index is harmless; two hundred of them stacked together are not.
Passenger aircraft : the sum of the Transport Indexes carried must not exceed 50 .
Cargo aircraft : the sum must not exceed 200 .
The individual package limit is a Transport Index of 10 for packages not carried under exclusive use. These totals are exactly why the NOTOC records the cumulative Transport Index, and why the pilot-in-command verifies the totals before accepting the load.
Certain package types are additionally restricted on passenger aircraft: Type B(M) packages, packages under exclusive use, and consignments requiring special arrangement are not carried on passenger-carrying aircraft.
4. Separation from People and from Film
Radiation dose accumulates over the whole duration of a flight, so proximity matters in a way that has no parallel in the other classes. Section 9 provides separation distance tables that load planners must apply:
Separation from persons — radioactive packages must be stowed at a minimum distance from any compartment occupied by passengers or crew and from any regularly occupied working position. The required distance is read from the separation table using the total Transport Index of the consignment and the flight duration : the higher the Transport Index and the longer the flight, the greater the separation.
Separation from undeveloped photographic film — radiation fogs film. A separate table gives the distances needed to protect film and photographic plates carried as cargo on the same aircraft.
Separation from live animals — the same protective logic applies.
Because the separation depends on flight time, a consignment that is compliant on a two-hour sector may be non-compliant on a twelve-hour sector with the same aircraft and the same stowage position. Load planners must recompute rather than reuse a previous load plan.
5. Documentation Specifics
A Class 7 consignment uses a Shipper's Declaration, but the RADIOACTIVE box is selected rather than NON-RADIOACTIVE, and the declaration carries additional entries that no other class requires:
The name or symbol of each radionuclide ;
A description of the physical and chemical form of the material, or a statement that it is special form or low dispersible;
- The maximum activity of the radioactive contents during transport;
- The category of the package (I-WHITE, II-YELLOW, III-YELLOW);
- The Transport Index , for II-YELLOW and III-YELLOW packages;
- The criticality safety index , where fissile material is involved;
The identification mark of any competent authority approval certificate applicable to the consignment.
Radioactive and non-radioactive dangerous goods must not be combined on the same declaration line, and the shipment type boxes must be struck out correctly — the deletion rules taught for the general declaration apply here without modification.