Study guide

5.2 Replying & Terminating Communications

Restricted Operator Certificate with Aeronautical Qualification ROC-A

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts & Who Needs the ROC-A 1.2 Eligibility, Exam Format & Accredited Examiners 1.3 Certificate Validity, Documentation & Official Sources

2 Regulations & Legal Framework

2.1 Priorities of Communications 2.2 Privacy of Communications 2.3 Control of Communications 2.4 Superfluous Communications, Interference & False Distress

3 Speech, Phonetics & Numbers

3.1 Speech Transmission Techniques 3.2 Time and Date 3.3 ITU Phonetic Alphabet 3.4 Transmission of Numbers

4 Phraseology & Call Signs

4.1 Procedural Words and Phrases 4.2 Aircraft Call Signs 4.3 Aeronautical Ground Station Identification

5 Establishing Communications

5.1 Calling Procedures & Frequency Discipline 5.2 Replying & Terminating Communications 5.3 Corrections, Repetitions & Message Handling 5.4 Signal Checks & the Readability Scale

6 Distress Communications

6.1 Distress Conditions & Frequencies 6.2 Distress Call, Message & Actions in Distress 6.3 Acknowledgment, Relay & Other Stations 6.4 Silence Imposition & Distress Cancellation

7 Urgency, Frequencies & Equipment

7.1 Urgency Communications (PAN PAN) 7.2 Aeronautical Frequency Assignments 7.3 Equipment Fundamentals & Radio Station Licences

5.2 Replying & Terminating Communications

Key Takeaways Explain This Topic AI

Reply as soon as possible with GO AHEAD (proceed) or STANDBY plus the anticipated minutes of delay

If you hear a call but are uncertain it is for you, do not reply until the call is repeated and understood

If you are unsure of the caller’s identity, reply with STATION CALLING + your identification + SAY AGAIN OVER

Terminate with OUT—conversation ended and no response is expected

After contact is established, THIS IS and OVER may be omitted and call signs abbreviated when there is no likelihood of interference

Last updated: August 2026

5.2 Replying & Terminating Communications

Quick Answer: When called, reply as soon as possible with GO AHEAD (send the message) or STANDBY plus the minutes of delay . Unsure the call is for you? Do not reply until it is repeated and understood. Unsure who called? STATION CALLING + your ID + SAY AGAIN OVER . End the exchange with OUT (no reply expected). After solid contact, you may drop THIS IS / OVER and shorten call signs if interference is unlikely.

RIC-21 §5.7.2 Replying closes the loop after the calling formats in §5.7.1. The ROC-A exam loves the contrast between GO AHEAD and STANDBY , the two different “uncertainty” rules (is it for me? vs who are you?), and the precise meaning of OUT versus OVER .

Reply as soon as possible

Operators hearing a call directed to their station shall reply as soon as possible and advise the calling station either:

to proceed with the message — GO AHEAD , or

not to proceed — STAND BY , followed by the anticipated number of minutes of delay .

  • Official examples (RIC-21)
  • Proceed: PIPER FOXTROT X-RAY QUEBEC QUEBEC
  • THIS IS
  • TORONTO TOWER
  • GO AHEAD
  • Delay: PIPER FOXTROT X-RAY QUEBEC QUEBEC
  • THIS IS
  • TORONTO TOWER
  • STAND BY TWO MINUTES

Key points for exam answers:

  • Phrase Meaning
  • GO AHEAD Ready for your traffic; proceed with the message
  • STAND BY (+ minutes) Do not send the message yet; expect a delay of the stated minutes
  • Reply timing As soon as possible when the call is clearly for you

“STAND BY” without a time is incomplete against the study-guide model—RIC-21 shows STAND BY TWO MINUTES (anticipated delay stated). Do not invent slang such as “hang on,” “wait one,” or “ten-four.”

Structure of a correct reply mirrors the call format: address the station that called you (their call sign first), THIS IS , your identification, then GO AHEAD or STAND BY … .

Uncertainty rule 1 — is this call for me?

When station operators hear a call but are uncertain that the call is intended for their station , they should not reply until the call has been repeated and understood .

Why: a premature answer on the wrong aircraft or ground unit steals the channel and can cause two stations to believe they are in contact when they are not. Silence until the call is clear is the safety choice.

  • Situation Action
  • Call clearly for you Reply ASAP with GO AHEAD or STANDBY + minutes
  • Not sure the call is for you No reply until repeated and understood
  • Call for someone else Do not answer; continue listening as required

Uncertainty rule 2 — who is calling me?

When station operators hear a call but are not sure of the identity of the calling station , they should reply immediately using:

  • The words STATION CALLING
  • The called station’s identification (your own ID—the station that was addressed)
  • The words SAY AGAIN
  • OVER
  • Example (RIC-21): STATION CALLING CESSNA FOXTROT NOVEMBER JULIETT INDIA
  • SAY AGAIN
  • OVER

Read that carefully for traps:

You do not invent a guessed call sign for the unknown caller.

You identify yourself (the station that was called) after STATION CALLING .

You request a full repeat of the caller’s identity with SAY AGAIN and leave the floor open with OVER .

Compare the two uncertainty cases side by side:

  • Uncertainty Do you key the mic? What you say
  • Unsure the call is for you No until repeated/understood (silence)
  • Sure you were called, unsure who called Yes, immediately STATION CALLING [your ID] SAY AGAIN OVER

Mixing these two rules is a classic exam fail.

Terminating communications — OUT

To terminate communications, simply conclude the transmission with the word OUT , which means “conversation is ended and no response is expected.”

  • Example (RIC-21): TORONTO TOWER
  • THIS IS
  • PIPER FOXTROT X-RAY QUEBEC QUEBEC
  • RECEIVED RUNWAY CLEARANCE
  • OUT
  • OUT versus OVER (must-know contrast)
  • Word Meaning (RIC-21 / App B practice)
  • OVER Invitation to reply; you expect a response
  • OUT Conversation ended; no response expected

Never use the slang mash-up “OVER AND OUT” —Appendix B / §5.5 bans that style of CB/police slang. If you want a reply, end with OVER . If the exchange is finished, end with OUT .

After contact is established — abbreviations

RIC-21 (message-handling context in §5.7.4, applied once contact is solid) allows efficiency on subsequent calls:

The words THIS IS and OVER may be omitted , and

If no likelihood of interference exists, the call sign for the station being called may be abbreviated .

Example of abbreviated subsequent contact: SCHEFFERVILLE RADIO BRAVO CHARLIE CONFIRM RIGHT ON SIERRA

Here the aircraft has already been identified in the full exchange; the ground/air pair shortens to function name + distinctive registration letters when the risk of confusion is low.

Rules of thumb for the exam:

Initial contact: full format (called, THIS IS, calling, frequency as required, OVER).

After contact: may omit THIS IS/OVER; may abbreviate called sign if no interference risk.

If the channel is busy or identity could be confused, stay with full call signs.

  • Worked reply drills
  • Drill A — Ready for traffic
  • Aircraft: “Toronto Tower, this is Piper FXQQ, on frequency one one eight decimal seven, over.”
  • Tower: “Piper Foxtrot X-ray Quebec Quebec, this is Toronto Tower, go ahead.”
  • Drill B — Not ready

Same call-up.

  • Tower: “Piper Foxtrot X-ray Quebec Quebec, this is Toronto Tower, stand by two minutes.”
  • Drill C — Unknown caller

You hear your call sign but not theirs.

  • You: “Station calling Cessna Foxtrot November Juliett India, say again, over.”
  • Drill D — End of exchange

You have the clearance and need nothing more.

  • You: “… received runway clearance, out.”
  • Exam-oriented checklist

Called clearly → reply ASAP .

Ready → GO AHEAD ; not ready → STAND BY + minutes .

Maybe not me → wait for repeat.

Don’t know caller → STATION CALLING [me] SAY AGAIN OVER .

Done → OUT (not OVER AND OUT).

Later calls → optional omit THIS IS/OVER; abbreviate only if safe.

Official source

RIC-21 Issue 3, §5.7.2 Replying (and related abbreviation note in §5.7.4 ), ISED study guide for the Restricted Operator Certificate with Aeronautical Qualification (ROC-A).