Study guide

15.2 Grid versus Ground, Datums, and Heights

California Professional Land Surveyor PLS

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 California PLS Licensure Pathways 1.3 Test Day, References, and Study Strategy

2 Business Practices: Public Practice, Contracts, and Procurement

2.1 Explaining Land Surveying Practice to the Public 2.2 Proposals, Written Contracts, and Scope 2.3 Offering and Procuring Surveying and Incidental Services

3 Business Practices: Personnel, Standards, and Firm Management

3.1 Directing Personnel and Coordinating Third Parties 3.2 Project Standards and Execution Plans 3.3 Managing a California Surveying Business

4 Business Practices: PLS Act, Map Act, Monuments, and Conflicts

4.1 Applying the Professional Land Surveyors' Act 4.2 Applying the Subdivision Map Act: Triggers, Waivers, and Exceptions 4.3 Monument Preservation and Conflicts of Interest

5 Research: Records, Title, and Document Conflicts

5.1 Project Research Sources 5.2 Title Documents and Encumbrances 5.3 Conflicts in Documents, Maps, and Drawings

6 Research: Datums, California Coordinate System, and Control Networks

6.1 Control Datums, Realizations, and Epochs 6.2 California Coordinate System (PRC 8801–8819) 6.3 Planning Control Networks to Accuracy Standards

7 Research: Calculations, Mapping Preparation, and Safety Planning

7.1 Surveying and Construction Calculations 7.2 Aerial and Terrestrial Mapping Preparation 7.3 Planning Field Safety Operations

8 Field Operations: Topographic, Control, and Construction Staking

8.1 Topographic and As-Built Surveys 8.2 Control Surveys in the Field 8.3 Construction Staking Field Practice

9 Field Operations: Boundary, PLSS Retracement, and Monument Search

9.1 Boundary Survey Field Operations 9.2 PLSS Retracement in California 9.3 Diligent Monument Search and Re-establishment

10 Field Operations: Hydrographic Surveys, Monitoring, and Water Evidence

10.1 Hydrographic and Tidal Datum Surveys 10.2 Monitoring Surveys 10.3 Physical Evidence of Water Boundaries

11 Field Operations: Right of Entry, Safety, and Technology Limits

11.1 Right of Entry and Field Communication 11.2 Executing Field Safety Protocols 11.3 Field Technology Limitations

12 Analysis: Hierarchy of Evidence and Conveyances

12.1 Hierarchy of Evidence (CCP 2077) 12.2 Sequential and Simultaneous Conveyances 12.3 Reconciling Deeds with Field Evidence

13 Analysis: Title Conflicts, Encumbrances, and Parol Evidence

13.1 Title Conflicts and Clouds on Title 13.2 Easements, Rights-of-Way, Leases, and Other Encumbrances 13.3 Parol Evidence and Relevant Case Law

14 Analysis: Water Boundaries, Unwritten Rights, and Earth Movement

14.1 Tidal and Non-Tidal Water Boundaries 14.2 Unwritten Rights: Adverse Possession and Prescription 14.3 Earth Movement and Boundaries

15 Analysis: Adjustments, Grid and Ground, and Quality Assurance

15.1 Survey Adjustments and Error Quantification 15.2 Grid versus Ground, Datums, and Heights 15.3 Historic Precision, QA, and Technology Limits

16 Mapping: Legal Descriptions

16.1 Legal Description Components and Types 16.2 Exceptions, Reservations, and Description Strengths 16.3 Preparing Descriptions for Easements and Other Interests

17 Mapping: Records of Survey, Corner Records, and Subdivision Maps

17.1 Records of Survey 17.2 Corner Records 17.3 Subdivision Map Act Maps and Certificates

18 Mapping Products and Professional Consulting

18.1 ALTA/NSPS, Topographic Maps, 3D Models, and Construction Reports 18.2 Professional Conduct, Accuracy Communication, Peer Review, and Liability 18.3 Expert Testimony, Land Planning, and Conflict Resolution

15.2 Grid versus Ground, Datums, and Heights

Key Takeaways Explain This Topic AI

Combined factor equals grid scale factor k times elevation factor R/(R+h); NGS NOS NGS 5 multiplies horizontal ground distance by that product to obtain grid distance.

PRC 8815.5, as amended by SB 566 effective January 1, 2024, requires a mapping angle, a combined grid factor, and the elevation used to determine that factor for at least one representative point when CCS83 or CCS2022 coordinates are shown on a map, corner record, or record of survey.

The representative point belongs on the project; a CORS thirty miles away, or a zone origin at northing 500,000 m, is not the elevation that entered the factor.

Orthometric height H, ellipsoid height h, and geoid height N still meet at H = h − N; the h that enters R/(R+h) must live in the same realization, epoch, and geoid-model family as the CCS83 values.

Knowledge BB: astronomic, geodetic, grid, and magnetic north are different directions; mapping angle relates geodetic north to grid north and is not magnetic declination.

Last updated: September 2026

Chapter 6 introduced Public Resources Code sections 8801–8819 : named plane systems, zones, the U.S. Survey foot versus the international foot, realization and epoch, and a preview of PRC 8815.5 . Independent ExamFinch teaching in this section is Domain IV analysis of grid versus ground (knowledge W ), projections, datums, realizations, and epochs (knowledge U ), geoid, ellipsoid, and orthometric heights (knowledge V ), and bearings or azimuths related to geodetic, magnetic, grid, or astronomic north (knowledge BB ). The job is to convert a length and to print what 8815.5 actually names.

Two different lengths of the same line

A ground distance is the horizontal distance between two marks at the topographic surface after slope reduction. A grid distance is the distance between the same two points after their positions have been projected onto the California Coordinate System plane. Construction staking on ground, a CCS83 inverse on a Record of Survey, and a GIS length on a Lambert web map are three different numbers until you convert them.

NOAA Manual NOS NGS 5 , State Plane Coordinate System of 1983 , is the published National Geodetic Survey (NGS) procedure used here. It is not a BPELSG exam specification. The manual's approximate elevation factor reduces a horizontal ground distance to the ellipsoid:

elevation factor = R / (R + h)

where R = 6,372,000 m (the approximate radius NGS states served NAD 27 and serves NAD 83 equally well; 20,906,000 ft in foot working) and h is ellipsoid height . On NAD 83, h = H + N , with H the orthometric height and N the geoid height. The working height equation remains H = h − N .

The grid scale factor k is the Lambert (or, if used, SPCS2022) point scale at the location—the ratio of grid distance to geodetic distance on the ellipsoid. PRC 8803–8808 publish standard parallels, central meridians, and origin latitudes. They do not publish a k you can memorize for a county. Compute k from the projection at the point, or take it from NGS or California Spatial Reference Center software for that latitude and longitude.

Combined factor CF = k × elevation factor

NGS multiplies the horizontal ground distance by the combined factor to obtain the grid distance . Divide a CCS83 inverse by CF (or multiply by 1/CF) to recover ground. Parcel area computed from grid coordinates is ground area only after you divide by CF² .

Worked combined-factor example (stated assumptions)

Representative point P on a San Bernardino County project, CCS83 Zone 5 , NAD83(2011) epoch 2010.00 . These values are a teaching set. They are not an NGS station datasheet and not a Board-published factor.

  • Grid scale factor k = 0.99994820 (Lambert point scale at P; not a PRC zone constant)
  • Orthometric height H = 1,800.000 m NAVD88

Geoid height N = −32.000 m (assumed GEOID18 interpolation at P; in production you interpolate the published model, you do not invent a county-wide N)

Mean radius R = 6,372,000 m (NGS NOS NGS 5 approximate radius)

Ellipsoid height h = H + N = 1,800.000 + (−32.000) = 1,768.000 m .

Elevation factor = 6,372,000 / (6,372,000 + 1,768.000) = 6,372,000 / 6,373,768 = 0.999722614 .

Combined factor CF = 0.99994820 × 0.999722614 = 0.99967083 (eight decimal places in this example).

A horizontal ground distance measured along the project, 400.000 m , becomes

grid = 400.000 × 0.99967083 = 399.868 m .

The same line, inversed from CCS83 coordinates as 399.868 m, returns

ground = 399.868 / 0.99967083 = 400.000 m .

The difference is 0.132 m in 400 m , about 329 ppm . Using k alone (0.99994820) would have given 399.979 m and left 0.111 m of elevation reduction unapplied. Using the elevation factor alone would have given 399.889 m and missed the projection. PRC 8815.5 names the combined grid factor , not "scale factor" and not a sea-level factor from NAD 27 literature.

If the 400.000 m had been a slope electronic distance, you would still reduce to horizontal at the marks before applying CF. Combined factor is not a slope correction. Applying CF as a scale on coordinates from an arbitrary origin can create a local ground coordinate system . That product is not CCS83 and must not be labeled State Plane under PRC 8801(e) .

PRC 8815.5 in full, deeper than Chapter 6

The Legislative Counsel display of PRC 8815.5 , and FindLaw's text current as of January 1, 2026, both print the SB 566 sentence (Stats. 2023, Ch. 111, effective January 1, 2024):

When CCS83 or CCS2022 coordinates are shown on any map, corner record, or record of survey , a mapping angle , combined grid factor , and the elevation used to determine the combined grid factor shall be shown on that document for at least one representative point .

Read it as a reporting statute, not as a calculation recipe:

Trigger. CCS83 or CCS2022 coordinates on a map, corner record, or record of survey. A CCS27-only plat is outside this sentence. Coordinates on a private working sketch that is not one of those three documents are outside this sentence; coordinates on the filed Record of Survey are not.

Three quantities, not one. Mapping angle. Combined grid factor. Elevation used to compute that factor. A note that says only "CSF = 0.99967" fails. A note that omits the elevation used to build CF fails. A note that omits mapping angle fails.

Representative point. One point that represents the survey is the statutory floor. A Continuously Operating Reference Station thirty miles away, or the zone origin at northing 500,000 m and easting 2,000,000 m , is not representative of a mountain site at H = 1,800 m. Los Angeles County's 2025 Record of Survey / Corner Record guide repeats the 8815.5 list and still expects the control scheme under PRC 8813.1 . Use a point on the project whose elevation you actually know.

Elevation used. Report the height that entered R/(R+h). If you used ellipsoid height, say h and the realization and epoch. If you used H and N, say H, N, and the geoid model. Printing H = 1,800.000 m NAVD88 without N is an incomplete derivation even if the number 1,800 appears.

One point is a floor. CF changes with k (latitude, longitude) and with h. A project that drops 1,000 m of elevation does not honestly share one CF everywhere. The statute does not require a factor at every lot corner. Professional analysis still asks whether one representative value misleads the next surveyor by more than the work can tolerate. That judgment is yours; it is not a published Board part-per-million.

Mapping angle is the convergence between geodetic north and grid north at the point. It is not a substitute for a basis of bearings statement, and it is not a magnetic declination. If the map's bearings are already CCS83 grid bearings, 8815.5 still wants the mapping angle when coordinates are shown, because the next surveyor must relate those grid bearings to a geodetic or astronomic observation. For this teaching point P, a stated mapping angle of 0°12'32" (from (λ − λ0) sin φ with P east of the Zone 5 central meridian 118°00' W) is an assumption to show the form of the note, not a datasheet value.

North is not one direction, and heights stay in families

  • North What it is How you obtain it Convert with
  • Astronomic Local vertical, celestial meridian Polaris, solar, gyro Laplace / deflection to geodetic
  • Geodetic Ellipsoid meridian Geodetic inverse, GNSS azimuth Mapping angle to grid
  • Grid CCS projection north Inverse of CCS coordinates Mapping angle to geodetic
  • Magnetic Magnetic meridian Compass, magnetometer Declination model, date, and annual change

A grid bearing from a CCS83 inverse is not a geodetic azimuth . A magnetic bearing from a 1960 deed is not grid. An astronomic observation on a mountain is not geodetic until you account for the deflection of the vertical. Mixing them in one basis-of-bearings note is an analysis failure.

Heights stay in families. NAD83 (with a realization and epoch) carries horizontal position and ellipsoid height h . NAVD88 carries orthometric height H . GEOID18 is the current NGS hybrid model that pairs NAD 83 (2011) epoch 2010.0 ellipsoid heights with NAVD 88 in the conterminous United States. Feeding an ITRF ellipsoid height into GEOID18, or reporting h as H, corrupts the h that entered the elevation factor. Chapter 11 treated that blunder on the occupation; this section treats it as a grid-to-ground input error.

CCS83 k is not a license to call projected WGS 84 coordinates State Plane. PRC 8801(e) still limits that name to CCS27, CCS83, and CCS2022.

Loading diagram... Ground to grid through elevation factor, scale factor, and the 8815.5 note

Teaching point P: parts-per-million reduction from 1.00000000 (k, elevation, combined)