Study guide
7.2 Aerial and Terrestrial Mapping Preparation
California Professional Land Surveyor PLS
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 California PLS Licensure Pathways 1.3 Test Day, References, and Study Strategy
2 Business Practices: Public Practice, Contracts, and Procurement
2.1 Explaining Land Surveying Practice to the Public 2.2 Proposals, Written Contracts, and Scope 2.3 Offering and Procuring Surveying and Incidental Services
3 Business Practices: Personnel, Standards, and Firm Management
3.1 Directing Personnel and Coordinating Third Parties 3.2 Project Standards and Execution Plans 3.3 Managing a California Surveying Business
4 Business Practices: PLS Act, Map Act, Monuments, and Conflicts
4.1 Applying the Professional Land Surveyors' Act 4.2 Applying the Subdivision Map Act: Triggers, Waivers, and Exceptions 4.3 Monument Preservation and Conflicts of Interest
5 Research: Records, Title, and Document Conflicts
5.1 Project Research Sources 5.2 Title Documents and Encumbrances 5.3 Conflicts in Documents, Maps, and Drawings
6 Research: Datums, California Coordinate System, and Control Networks
6.1 Control Datums, Realizations, and Epochs 6.2 California Coordinate System (PRC 8801–8819) 6.3 Planning Control Networks to Accuracy Standards
7 Research: Calculations, Mapping Preparation, and Safety Planning
7.1 Surveying and Construction Calculations 7.2 Aerial and Terrestrial Mapping Preparation 7.3 Planning Field Safety Operations
8 Field Operations: Topographic, Control, and Construction Staking
8.1 Topographic and As-Built Surveys 8.2 Control Surveys in the Field 8.3 Construction Staking Field Practice
9 Field Operations: Boundary, PLSS Retracement, and Monument Search
9.1 Boundary Survey Field Operations 9.2 PLSS Retracement in California 9.3 Diligent Monument Search and Re-establishment
10 Field Operations: Hydrographic Surveys, Monitoring, and Water Evidence
10.1 Hydrographic and Tidal Datum Surveys 10.2 Monitoring Surveys 10.3 Physical Evidence of Water Boundaries
11 Field Operations: Right of Entry, Safety, and Technology Limits
11.1 Right of Entry and Field Communication 11.2 Executing Field Safety Protocols 11.3 Field Technology Limitations
12 Analysis: Hierarchy of Evidence and Conveyances
12.1 Hierarchy of Evidence (CCP 2077) 12.2 Sequential and Simultaneous Conveyances 12.3 Reconciling Deeds with Field Evidence
13 Analysis: Title Conflicts, Encumbrances, and Parol Evidence
13.1 Title Conflicts and Clouds on Title 13.2 Easements, Rights-of-Way, Leases, and Other Encumbrances 13.3 Parol Evidence and Relevant Case Law
14 Analysis: Water Boundaries, Unwritten Rights, and Earth Movement
14.1 Tidal and Non-Tidal Water Boundaries 14.2 Unwritten Rights: Adverse Possession and Prescription 14.3 Earth Movement and Boundaries
15 Analysis: Adjustments, Grid and Ground, and Quality Assurance
15.1 Survey Adjustments and Error Quantification 15.2 Grid versus Ground, Datums, and Heights 15.3 Historic Precision, QA, and Technology Limits
16 Mapping: Legal Descriptions
16.1 Legal Description Components and Types 16.2 Exceptions, Reservations, and Description Strengths 16.3 Preparing Descriptions for Easements and Other Interests
17 Mapping: Records of Survey, Corner Records, and Subdivision Maps
17.1 Records of Survey 17.2 Corner Records 17.3 Subdivision Map Act Maps and Certificates
18 Mapping Products and Professional Consulting
18.1 ALTA/NSPS, Topographic Maps, 3D Models, and Construction Reports 18.2 Professional Conduct, Accuracy Communication, Peer Review, and Liability 18.3 Expert Testimony, Land Planning, and Conflict Resolution
7.2 Aerial and Terrestrial Mapping Preparation
Key Takeaways Explain This Topic AI
January 2025 Domain II Knowledge B is procedures and requirements for aerial mapping: photogrammetry, LiDAR, UAV, control, and flight plan; Knowledge C is preparation for terrestrial mapping with total station, GPS, LiDAR, and photogrammetry.
Ground-control points constrain the aerial or scan solution; independent checkpoints test it. ASPRS Positional Accuracy Standards for Digital Geospatial Data, Edition 2, Version 2 (2024) report RMSE classes, not a homemade inch claim.
14 CFR 107.51 caps small UAS at 400 feet above ground level (with a structure exception), 87 knots, 3 statute miles visibility, and 500 feet below / 2,000 feet horizontally from clouds; 107.41 requires ATC authorization in Class B, C, D, or surface Class E.
A flight plan is not a CES topographic map. Independent ExamFinch teaching stops at control, overlap, airspace, and accuracy-class prep; Chapter 8 and Chapter 18 own field capture and finished mapping products.
Terrestrial prep is the occupy-and-scan plan: instrument calibration, GNSS session design, scan-station overlap, and targets on the same datum and epoch as the aerial control.
Last updated: September 2026
Domain II Knowledge B asks for procedures and requirements for aerial mapping (photogrammetric, LiDAR, UAV, control, flight plan). Knowledge C asks for procedures for preparation for terrestrial mapping (total station, GPS, LiDAR, photogrammetry). Independent ExamFinch teaching in this section is the preparation file: control, flight or occupy plan, and an accuracy statement you can actually test. It is not a finished contour map, not a BIM deliverable, and not the California Civil Engineering Surveying (CES) exam. Chapter 8 owns topographic field methods. Chapter 18 owns preparing topographic maps from those sources.
Decide the product and the accuracy class before you fly or occupy
Start with the same three questions Chapter 6 used for control networks: purpose, named datum, and claimed accuracy.
Purpose. Design-grade contours, reconnaissance planimetrics, a corridor digital terrain model, or a terrestrial as-built scan each need a different error budget. A UAV reconnaissance flight that will never be used to set a property corner is not the same product as photogrammetry that will support a grading exhibit.
Named control. Horizontal and vertical control must name the datum, realization, and epoch from Chapter 6. Aerial targets and terrestrial scan-spheres that sit on mixed epochs are the same PRC 8815.3 mistake as mixed CORS occupations.
Claimed accuracy. The American Society for Photogrammetry and Remote Sensing (ASPRS) Positional Accuracy Standards for Digital Geospatial Data, Edition 2, Version 2 (2024) report root-mean-square error (RMSE) classes (horizontal RMSEH, vertical RMSEV, and a three-dimensional class). Secondary summaries of that edition describe a 30-checkpoint floor for many projects under 1,000 km² . Confirm the checkpoint count and reporting sentences in the ASPRS document for the project you are planning. Do not print "±0.10 ft UAV" and call it ASPRS.
Ground control points (GCPs) are used in the aerial triangulation or LiDAR adjustment. Checkpoints are withheld from that adjustment and used to test the product. Using the same painted cross as both GCP and checkpoint is not a test. Plan GCP density and geometry for the block or corridor; plan checkpoints in both open ground ( non-vegetated vertical accuracy , NVA, in ASPRS language) and vegetated cover when the product claims a vegetated vertical class.
Aerial mapping: photogrammetry, LiDAR, and UAV flight plans
A flight plan is a survey document. It states flying height, overlap, airspace, crew, and control.
Photogrammetry. Ground sample distance is a similar-triangles relationship: GSD = (flying height × pixel pitch) / focal length , in consistent units. Worked example: pixel pitch 4.0 μm (0.000004 m), focal length 35 mm (0.035 m), planned flying height 80 m above ground. GSD = (80 × 0.000004) / 0.035 = 0.00914 m ≈ 0.91 cm . That GSD is a planning number. It is not the ASPRS RMSE class. Typical manned mapping-camera practice uses on the order of 60 percent forward overlap and 30 percent sidelap ; many UAV mapping flights use higher overlap. Those percentages are typical practice, not a BPELSG-published overlap statute. Put the planned overlap in the flight plan so the triangulation has stereo coverage, including at the block edges.
LiDAR. The flight plan states swath overlap, flying height, and the pulse-density or point-density target the client specified. Do not invent a U.S. Geological Survey quality-level number as a California Board requirement if the project specifications do not name one. Plan GNSS/IMU trajectory quality the same way Chapter 6 planned control: enough satellite geometry, and enough ground control to tie the swath to the project datum. Relative swath-to-swath agreement is a LiDAR prep item; it is not a substitute for independent checkpoints.
UAV and 14 CFR Part 107. Commercial small unmanned aircraft operations run under 14 CFR Part 107 . Section 107.51 operating limitations: groundspeed not more than 87 knots (100 miles per hour); altitude not higher than 400 feet above ground level , unless the aircraft stays within a 400-foot radius of a structure and not more than 400 feet above that structure's immediate uppermost limit; flight visibility not less than 3 statute miles from the control station; not less than 500 feet below and 2,000 feet horizontally from clouds. The 80 m (about 262 ft) photogrammetry example sits inside the 400-foot cap. Section 107.41 : no small unmanned aircraft in Class B, C, or D airspace, or within the lateral boundaries of surface Class E designated for an airport, without prior Air Traffic Control authorization. In practice that authorization is requested through LAANC or the FAA DroneZone portal; LAANC is a request system, not a traffic display. Section 107.31 requires visual line of sight. Section 107.49 is the preflight list the remote pilot in command must complete: local weather, airspace and restrictions, persons and property on the surface, other ground hazards; brief the crew on conditions, emergencies, contingencies, roles, and hazards; confirm control links, power, and that any payload is secure. A California PLS flight plan that skips 107.49 because "we always fly this corridor" is not prepared.
California land-use or airport overlay rules may add local limits. Do not invent a city ordinance number you have not opened. Note the airspace class and any NOTAM or TFR in the flight plan.
Terrestrial mapping preparation (Knowledge C)
Terrestrial prep is the occupy plan that makes the field day repeatable.
Method What you prepare before the crew rolls
Total station Traverse or resection design, backsight pairs, EDM calibration status, target heights, and the control stations from Chapter 6
GNSS / GPS Session length, independent occupations if you will establish CCS83, multipath reconnaissance, antenna calibration, and the published epoch you will reduce to
Terrestrial LiDAR Scan-station spacing, planned overlap between stations, target or sphere layout, and GNSS or total-station ties on those targets
Close-range photogrammetry Camera calibration, scale bars or targeted GCPs, and the same independent checkpoints you would fly
Error sources from Domain II Knowledge U belong in this file: multipath , data input , and instrument calibration . A terrestrial laser scanner with a stale calibration occupying next to a glass curtain wall is a planned miss. A total-station layout of aerial targets must recover the same monument the flight plan named.
Do not let this section become CES. You are not interpolating a highway catch point in the field. You are not producing the Chapter 18 topographic map. You are preparing the control, the mission, and the test so that whoever later extracts contours or a point cloud can say what was planned. Independent ExamFinch teaching does not describe these procedures as Board-approved or sponsor-equivalent. It describes the preparation a California PLS candidate should be able to defend on Domain II.