Study guide
1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology
NDAEB Theory Examination Canada
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Foundations
1.1 NDAEB Exam Structure, Logistics & Candidate Regulations 1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology
2 Chapter 2: Professional Ethics, Jurisprudence & Scope of Practice
2.1 CDAA Code of Ethics & Ethical Decision-Making 2.2 Provincial Dental Assisting Regulation & Scope of Practice 2.3 Informed Consent, Documentation & Professional Liability 2.4 Abuse and Neglect Reporting, Conflicts of Interest & Patients with Infectious Diseases
3 Chapter 3: Oral Anatomy, Histology & Tooth Morphology
3.1 Craniofacial Osteology, Muscles of Mastication & Salivary Glands 3.2 Odontogenesis, Dental Hard Tissues & the Periodontium 3.3 Tooth Morphology, Dentition Comparison & Eruption Chronology 3.4 Oral and Facial Landmarks, Facial and Tongue Muscles, Paranasal Sinuses & Cervical Lymph Nodes
4 Chapter 4: Oral Microbiology, Pathology & Pharmacology Basics
4.1 Oral Microbiology, Biofilm Ecology & Caries Pathogenesis 4.2 Diagnostic Terminology, Mucosal Lesions & Oral Pathology 4.3 Dental Pharmacology, Local Anesthetics & Medical Drug Considerations 4.4 Prescriptions, Abbreviations, Over-the-Counter & Recreational Drugs
5 Chapter 5: Infection Prevention and Control (IPAC) & Asepsis
5.1 The Chain of Infection, Routine Practices & Personal Protective Equipment 5.2 Environmental Surface Asepsis, Barriers & Operatory Decontamination 5.3 Dental Unit Waterlines, Biofilm Management & Aseptic Water Protocols 5.4 Infection Prevention Across Care Settings, Laboratory Asepsis & Employee Health Records
6 Chapter 6: Instrument Processing & Sterilization Monitoring
6.1 Instrument Classification, Decontamination & Packaging Protocols 6.2 Heat Sterilization Modalities, Cycle Parameters & Instrument Care 6.3 Physical, Chemical & Biological Sterilization Quality Assurance
7 Chapter 7: Patient Assessment, Vital Signs & Dental Charting
7.1 Health History Assessment, Medical Alerts & Baseline Vital Signs 7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation 7.3 Electronic Dental Records, Legal Standards & Retention Mandates
8 Chapter 8: Dental Radiography & Radiation Protection
8.1 Radiation Physics, Biological Hazards & Safety Code 30 Compliance 8.2 Geometric Principles, Intraoral Projections & Digital Sensor Systems 8.3 Radiographic Anatomy, Labial Mounting & Quality Troubleshooting 8.4 Receptor Care, Patient Preparation, Image Management & Radiographic Anomalies
9 Chapter 9: Chairside Assisting, Ergonomics & Moisture Control
9.1 Four-Handed Dentistry, Operating Zones & Musculoskeletal Ergonomics 9.2 Instrument Grasps, Transfer Mechanics & Sharps Safety 9.3 High-Volume Evacuation, Cotton Roll Isolation & Moisture Control Aids 9.4 Dental Dam: Selection, Punching, Placement Errors & Removal 9.5 Operator Ergonomics, Instrumentation Technique & Musculoskeletal Disorder Prevention
10 Chapter 10: Restorative Materials, Cavity Preparation & Tooth Whitening
10.1 Pulpal Protection, Cavity Liners, Bases & Adhesive Systems 10.2 Dental Amalgam Metallurgy, Composite Resins & Curing Protocols 10.3 Matrix Systems, Retainers, Wedges & Interproximal Contouring 10.4 Cavity Classification & Cavity Preparation Terminology 10.5 Vital and Non-Vital Tooth Whitening
11 Chapter 11: Impression Materials & Laboratory Support
11.1 Impression Material Science, Tray Selection & Clinical Manipulation 11.2 Gypsum Chemistry, Model Pouring & Cast Trimming Principles 11.3 Provisional Restorations, Custom Trays & Laboratory Fabrication 11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries
12 Chapter 12: Fixed & Removable Prosthodontics Assisting
12.1 Crown & Bridge Preparation, Gingival Retraction & Definitive Cementation 12.2 Removable Partial & Complete Dentures, Clinical Stages & Home Care 12.3 Dental Implant Systems, Osseointegration & Clinical Maintenance 12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management
13 Chapter 13: Endodontics & Periodontics Specialty Assisting
13.1 Endodontic Diagnostics, Pathosis & Biomechanical Canal Instrumentation 13.2 Canal Obturation Science, Surgical Endodontics & Tooth Resection 13.3 Periodontal Assessment, Non-Surgical Therapy & Periodontal Surgery 13.4 The Periodontal Disease Process, the 2017 Classification & Plaque and Gingival Indices
14 Chapter 14: Oral Surgery & Suture Care Assisting
14.1 Surgical Asepsis, Elevator Biomechanics & Extraction Armamentarium 14.2 Clinical Exodontia Procedures, Suture Materials & Suture Removal 14.3 Post-Surgical Home Care, Hemostasis & Alveolar Osteitis Management
15 Chapter 15: Orthodontics, Pediatric & Special Needs Patient Care
15.1 Malocclusion Classification, Diagnostic Records & Fixed Appliances 15.2 Pediatric Behavior Guidance, Pulp Therapy & Stainless Steel Crowns 15.3 Appliance Debonding, Retention Protocols & Pediatric Trauma Management 15.4 Special Needs Patient Management: Older Adults, Pregnancy & Medical, Physical or Cognitive Conditions 15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases
16 Chapter 16: Dental Emergencies, Anesthesia & Sedation Support
16.1 Local Anesthesia Armamentarium, Injection Techniques & Complications 16.2 Inhalation Analgesia, Nitrous Oxide Protocols & Conscious Sedation 16.3 Medical Emergency Protocols, Recognition & Life Support Algorithms
17 Chapter 17: Practice Administration, Inventory & Occupational Safety
17.1 Appointment Book Matrix, Clinical Scheduling & Preventive Recall Systems 17.2 Canadian Dental Benefits, Procedure Coding & Financial Management 17.3 WHMIS 2015/GHS, Hazardous Waste & Sharps Exposure Protocols 17.4 Filing and Inventory Systems, Equipment Records, Financial Records, Referrals & Office Policies
18 Chapter 18: Preventive Dentistry, Plaque Biofilm & Oral Hygiene Instruction
18.1 Caries Pathogenesis, Plaque Demineralization & CAMBRA Protocols 18.2 Plaque Disclosing, Toothbrushing Methods & Interdental Cleansing Aids 18.3 Nutritional Foundations, Cariogenicity & Dietary Risk Counselling
19 Chapter 19: Coronal Polishing, Fluoride, Sealants & Desensitizing Agents
19.1 Coronal Polishing Principles, Selective Polishing & Clinical Technique 19.2 Fluoride Chemistry, Remineralization Science & Toxicity Protocols 19.3 Pit & Fissure Sealant Armamentarium, Placement & Clinical Evaluation 19.4 Dentin Hypersensitivity & Desensitizing Agents
1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology
Key Takeaways Explain This Topic AI
The NDAEB mandates the FDI (Fédération Dentaire Internationale) Two-Digit System as the official tooth notation system for all examination questions and Canadian clinical documentation.
In permanent dentition, the first digit designates the quadrant (1 = Maxillary Right, 2 = Maxillary Left, 3 = Mandibular Left, 4 = Mandibular Right) and the second digit designates the tooth (1 = Central Incisor to 8 = Third Molar).
In primary dentition, quadrants are numbered 5 through 8 in clockwise order (5 = Maxillary Right to 8 = Mandibular Right) and teeth are numbered 1 through 5 from central incisor to second molar.
Standard dental anatomical terminology distinguishes tooth surfaces (mesial, distal, facial/labial/buccal, lingual/palatal, occlusal/incisal) and directional coordinates (coronal, apical, cervical, proximal).
Precise anatomical communication is critical for chairside four-handed dentistry, accurate dental record charting, radiographic mounting, and interprofessional clinical transfer.
Last updated: October 2026
1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology
Quick Answer: The NDAEB exclusively tests and requires the FDI (Fédération Dentaire Internationale) Two-Digit World Dental Federation system for tooth notation in all examination questions, charting exercises, and clinical vignettes. In permanent dentition, quadrants are numbered 1 to 4 clockwise starting from the maxillary right, with teeth numbered 1 to 8 from the midline distally (e.g., tooth 11 is the maxillary right central incisor; tooth 36 is the mandibular left first molar). In primary dentition, quadrants are numbered 5 to 8, with teeth numbered 1 to 5 (e.g., tooth 65 is the primary maxillary left second molar). Standard directional terminology (mesial, distal, buccal, lingual, occlusal, apical) defines anatomical relationships essential for chairside assisting and accurate record-keeping.
The FDI Two-Digit Tooth Notation System
In Canadian dental practice and on the NDAEB Theory Examination, the FDI (Fédération Dentaire Internationale) Two-Digit System (also recognized as ISO 3950) is the official standard for identifying teeth. While candidates trained in the United States or educated abroad may be accustomed to the Universal Numbering System (which uses numbers 1–32 and letters A–T) or the Palmer Notation System (which uses quadrant brackets), the NDAEB does not use these alternative systems. Mastery of the FDI notation is therefore a non-negotiable prerequisite for passing the exam.
The Two-Digit Code Structure
Under the FDI system, every tooth is identified by a two-digit integer:
The first digit indicates the quadrant (and whether the dentition is permanent or primary).
The second digit indicates the position of the tooth within that quadrant , counted sequentially starting from the midline (central incisor) and moving posterior (distally).
Verbal Pronunciation Rule: In professional Canadian dental practice, FDI designations are always articulated as two separate numbers, never as a combined two-digit number. For example, tooth 16 is pronounced "one-six" (not "sixteen"), and tooth 47 is pronounced "four-seven" (not "forty-seven"). This verbal convention prevents miscommunication in noisy clinical environments. FDI Quadrant Orientation (Viewed Facing the Patient)
- Maxillary Arch (Upper)
- Right Left
- Quadrant 1 (Permanent) | Quadrant 2 (Permanent)
- Quadrant 5 (Primary) | Quadrant 6 (Primary)
- -------------------------+--------------------------
- Quadrant 4 (Permanent) | Quadrant 3 (Permanent)
- Quadrant 8 (Primary) | Quadrant 7 (Primary)
- Right Left
- Mandibular Arch (Lower)
Notice the universal anatomical convention: quadrants are charted from the perspective of the patient's anatomical right and left, which is reversed from the examiner's point of view facing the patient.
Permanent Dentition (Quadrants 1 through 4)
The adult permanent dentition comprises 32 teeth divided equally across four quadrants (8 teeth per quadrant).
- Quadrant Designations
- Quadrant 1: Maxillary Right
- Quadrant 2: Maxillary Left
- Quadrant 3: Mandibular Left
- Quadrant 4: Mandibular Right
Rule for quadrant sequence: Move clockwise starting from the patient's upper right (Quadrant 1) → upper left (Quadrant 2) → lower left (Quadrant 3) → lower right (Quadrant 4).
- Tooth Numbers Within Each Quadrant (1 through 8)
- Central Incisor (closest to the anatomical midline)
- Lateral Incisor
- Canine (Cuspid)
- First Premolar (First Bicuspid)
- Second Premolar (Second Bicuspid)
- First Molar (6-year molar)
- Second Molar (12-year molar)
- Third Molar (Wisdom tooth)
- Complete Permanent Dentition Mapping
- Maxillary Right (Quadrant 1): 18, 17, 16, 15, 14, 13, 12, 11
- Maxillary Left (Quadrant 2): 21, 22, 23, 24, 25, 26, 27, 28
- Mandibular Left (Quadrant 3): 31, 32, 33, 34, 35, 36, 37, 38
- Mandibular Right (Quadrant 4): 48, 47, 46, 45, 44, 43, 42, 41
- Primary (Deciduous) Dentition (Quadrants 5 through 8)
The primary dentition consists of 20 teeth divided equally across four quadrants (5 teeth per quadrant).
Quadrant Designations
Continuing the clockwise numbering sequence initiated in the permanent dentition:
- Quadrant 5: Primary Maxillary Right
- Quadrant 6: Primary Maxillary Left
- Quadrant 7: Primary Mandibular Left
- Quadrant 8: Primary Mandibular Right
- Tooth Numbers Within Each Primary Quadrant (1 through 5)
- Central Incisor
- Lateral Incisor
- Canine (Cuspid)
- First Molar
- Second Molar
Critical Anatomical Note: There are no premolars (bicuspids) in the primary dentition. In the transition to permanent dentition, the primary molars are succeeded by the permanent premolars (teeth 4 and 5), while the permanent molars (teeth 6, 7, and 8) erupt posterior to the primary dental arch without deciduous predecessors.
- Complete Primary Dentition Mapping
- Maxillary Right (Quadrant 5): 55, 54, 53, 52, 51
- Maxillary Left (Quadrant 6): 61, 62, 63, 64, 65
- Mandibular Left (Quadrant 7): 71, 72, 73, 74, 75
- Mandibular Right (Quadrant 8): 85, 84, 83, 82, 81
- FDI vs. Universal System Cross-Reference
Candidates familiar with the Universal Numbering System should review the following reference comparison to avoid error when translating dental charts or clinical literature:
- Tooth Description FDI System (NDAEB Standard) Universal System (US Standard) Palmer Notation
- Maxillary Right Third Molar 18 ("one-eight") 1 8┘
- Maxillary Right First Molar 16 ("one-six") 3 6┘
- Maxillary Right Central Incisor 11 ("one-one") 8 1┘
- Maxillary Left Central Incisor 21 ("two-one") 9 └1
- Maxillary Left First Premolar 24 ("two-four") 12 └4
- Maxillary Left First Molar 26 ("two-six") 14 └6
- Mandibular Left First Molar 36 ("three-six") 19 ┌6
- Mandibular Left Central Incisor 31 ("three-one") 24 ┌1
- Mandibular Right Central Incisor 41 ("four-one") 25 1┐
- Mandibular Right First Premolar 44 ("four-four") 28 4┐
- Mandibular Right First Molar 46 ("four-six") 30 6┐
- Primary Maxillary Right Second Molar 55 ("five-five") A E┘
- Primary Maxillary Right Central Incisor 51 ("five-one") E A┘
- Primary Maxillary Left Second Molar 65 ("six-five") J └E
- Primary Mandibular Left Second Molar 75 ("seven-five") K ┌E
- Primary Mandibular Right Second Molar 85 ("eight-five") T E┐
- Anatomical Tooth Surfaces
Accurate recording and communication require precise identification of tooth surfaces. Every tooth has five distinct surfaces:
Surface Name Abbreviation Definition & Anatomical Location
Mesial M The surface of the tooth closest to the median line (midline) of the dental arch.
Distal D The surface of the tooth furthest from the median line along the curvature of the arch.
Facial F The surface facing outwardly toward the lips or cheeks. Subdivided into:
— Labial La Facial surface of anterior teeth (incisors and canines) adjacent to the lips.
— Buccal B Facial surface of posterior teeth (premolars and molars) adjacent to the cheeks.
Lingual L The surface facing inward toward the tongue (mandibular arch). Also used generically.
— Palatal P The internal surface of maxillary teeth facing toward the hard palate and roof of the mouth.
Occlusal O The broad chewing, masticating, or grinding surface of posterior teeth (premolars and molars).
Incisal I The cutting or biting edge of anterior teeth (incisors and canines).
Proximal Surfaces, Contact Areas, and Embrasures
Proximal Surface: Any surface facing an adjacent tooth in the same dental arch (i.e., mesial and distal surfaces collectively). Where two teeth meet, the mesial surface of the more distal tooth contacts the distal surface of the more mesial tooth (with the sole exception of the central incisors, teeth 11/21 and 31/41, where mesial meets mesial at the midline).
Contact Area (Contact Point): The localized region on the proximal surface that touches the adjacent tooth. Proper contact prevents food impaction and stabilizes the dental arch.
Embrasure: The triangular, V-shaped spillway space radiating outward from the contact area. Embrasures are categorized into facial (buccal/labial), lingual, occlusal (or incisal), and gingival (interdental or cervical) embrasures. They channel food away from contact points during mastication and protect the interdental papilla.
Directional Coordinates and Anatomical Relationships
In clinical assisting, directional terms describe exact spatial locations on or surrounding a tooth:
Coronal: Directed toward the crown of the tooth (e.g., a restoration located coronally to the cementoenamel junction).
Apical: Directed toward the apex or tip of the root (e.g., an apical abscess or periapical lesion).
Cervical (Gingival): Pertaining to the neck of the tooth or the cementoenamel junction (CEJ), where the anatomical crown meets the anatomical root.
Axial: Parallel to the long axis of the tooth (e.g., the axial wall of a cavity preparation).
Interproximal: Situated between the proximal surfaces of adjacent teeth (e.g., interproximal caries detected on bitewing radiographs).
Division of Teeth into Thirds
For precise documentation of fractures, restorations, or caries, teeth are divided geometrically into thirds:
Crown Divisions:
Cervico-occlusal / Cervico-incisal: Cervical third, middle third, occlusal/incisal third.
Mesiodistal: Mesial third, middle third, distal third.
Faciolingual: Facial (buccal/labial) third, middle third, lingual third.
Root Divisions:
Longitudinal: Cervical third (near CEJ), middle third, apical third (near root tip).
Clinical Application in Canadian Dental Assisting Practice
A comprehensive command of FDI tooth numbering and anatomical terminology is essential across multiple clinical dimensions on the NDAEB examination:
Clinical Charting & Electronic Records: Transcribing existing conditions, restorations, and pathosis (such as recording a disto-occlusal amalgam on tooth 35, or charting a class V composite on the buccal cervical third of tooth 13).
Operatory Preparation & Four-Handed Assisting: Anticipating instrument and material requirements based on tooth location. For instance, selecting the correct rubber dam clamp (e.g., a winged clamp 14A for partially erupted molar 47 vs. a clamp 00 for premolar 24) or preparing the correct local anesthetic injection setup (e.g., preparing long needle and 27-gauge for an inferior alveolar block in quadrant 3 vs. short needle for maxillary infiltration in quadrant 1).
Radiographic Mounting: Orienting periapical and bitewing films accurately. Dental assistants must verify the curve of Spee, root angulations, and landmark structures (such as the maxillary sinus or mental foramen) to position radiographs correctly in FDI quadrants.
Laboratory and Specialist Referrals: Accurately documenting prescribed prosthodontic units (e.g., porcelain-fused-to-metal crown on 16) or endodontic referrals to ensure patient safety and error-free team communication.