Study guide

7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation

NDAEB Theory Examination Canada

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Foundations

1.1 NDAEB Exam Structure, Logistics & Candidate Regulations 1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology

2 Chapter 2: Professional Ethics, Jurisprudence & Scope of Practice

2.1 CDAA Code of Ethics & Ethical Decision-Making 2.2 Provincial Dental Assisting Regulation & Scope of Practice 2.3 Informed Consent, Documentation & Professional Liability 2.4 Abuse and Neglect Reporting, Conflicts of Interest & Patients with Infectious Diseases

3 Chapter 3: Oral Anatomy, Histology & Tooth Morphology

3.1 Craniofacial Osteology, Muscles of Mastication & Salivary Glands 3.2 Odontogenesis, Dental Hard Tissues & the Periodontium 3.3 Tooth Morphology, Dentition Comparison & Eruption Chronology 3.4 Oral and Facial Landmarks, Facial and Tongue Muscles, Paranasal Sinuses & Cervical Lymph Nodes

4 Chapter 4: Oral Microbiology, Pathology & Pharmacology Basics

4.1 Oral Microbiology, Biofilm Ecology & Caries Pathogenesis 4.2 Diagnostic Terminology, Mucosal Lesions & Oral Pathology 4.3 Dental Pharmacology, Local Anesthetics & Medical Drug Considerations 4.4 Prescriptions, Abbreviations, Over-the-Counter & Recreational Drugs

5 Chapter 5: Infection Prevention and Control (IPAC) & Asepsis

5.1 The Chain of Infection, Routine Practices & Personal Protective Equipment 5.2 Environmental Surface Asepsis, Barriers & Operatory Decontamination 5.3 Dental Unit Waterlines, Biofilm Management & Aseptic Water Protocols 5.4 Infection Prevention Across Care Settings, Laboratory Asepsis & Employee Health Records

6 Chapter 6: Instrument Processing & Sterilization Monitoring

6.1 Instrument Classification, Decontamination & Packaging Protocols 6.2 Heat Sterilization Modalities, Cycle Parameters & Instrument Care 6.3 Physical, Chemical & Biological Sterilization Quality Assurance

7 Chapter 7: Patient Assessment, Vital Signs & Dental Charting

7.1 Health History Assessment, Medical Alerts & Baseline Vital Signs 7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation 7.3 Electronic Dental Records, Legal Standards & Retention Mandates

8 Chapter 8: Dental Radiography & Radiation Protection

8.1 Radiation Physics, Biological Hazards & Safety Code 30 Compliance 8.2 Geometric Principles, Intraoral Projections & Digital Sensor Systems 8.3 Radiographic Anatomy, Labial Mounting & Quality Troubleshooting 8.4 Receptor Care, Patient Preparation, Image Management & Radiographic Anomalies

9 Chapter 9: Chairside Assisting, Ergonomics & Moisture Control

9.1 Four-Handed Dentistry, Operating Zones & Musculoskeletal Ergonomics 9.2 Instrument Grasps, Transfer Mechanics & Sharps Safety 9.3 High-Volume Evacuation, Cotton Roll Isolation & Moisture Control Aids 9.4 Dental Dam: Selection, Punching, Placement Errors & Removal 9.5 Operator Ergonomics, Instrumentation Technique & Musculoskeletal Disorder Prevention

10 Chapter 10: Restorative Materials, Cavity Preparation & Tooth Whitening

10.1 Pulpal Protection, Cavity Liners, Bases & Adhesive Systems 10.2 Dental Amalgam Metallurgy, Composite Resins & Curing Protocols 10.3 Matrix Systems, Retainers, Wedges & Interproximal Contouring 10.4 Cavity Classification & Cavity Preparation Terminology 10.5 Vital and Non-Vital Tooth Whitening

11 Chapter 11: Impression Materials & Laboratory Support

11.1 Impression Material Science, Tray Selection & Clinical Manipulation 11.2 Gypsum Chemistry, Model Pouring & Cast Trimming Principles 11.3 Provisional Restorations, Custom Trays & Laboratory Fabrication 11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries

12 Chapter 12: Fixed & Removable Prosthodontics Assisting

12.1 Crown & Bridge Preparation, Gingival Retraction & Definitive Cementation 12.2 Removable Partial & Complete Dentures, Clinical Stages & Home Care 12.3 Dental Implant Systems, Osseointegration & Clinical Maintenance 12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management

13 Chapter 13: Endodontics & Periodontics Specialty Assisting

13.1 Endodontic Diagnostics, Pathosis & Biomechanical Canal Instrumentation 13.2 Canal Obturation Science, Surgical Endodontics & Tooth Resection 13.3 Periodontal Assessment, Non-Surgical Therapy & Periodontal Surgery 13.4 The Periodontal Disease Process, the 2017 Classification & Plaque and Gingival Indices

14 Chapter 14: Oral Surgery & Suture Care Assisting

14.1 Surgical Asepsis, Elevator Biomechanics & Extraction Armamentarium 14.2 Clinical Exodontia Procedures, Suture Materials & Suture Removal 14.3 Post-Surgical Home Care, Hemostasis & Alveolar Osteitis Management

15 Chapter 15: Orthodontics, Pediatric & Special Needs Patient Care

15.1 Malocclusion Classification, Diagnostic Records & Fixed Appliances 15.2 Pediatric Behavior Guidance, Pulp Therapy & Stainless Steel Crowns 15.3 Appliance Debonding, Retention Protocols & Pediatric Trauma Management 15.4 Special Needs Patient Management: Older Adults, Pregnancy & Medical, Physical or Cognitive Conditions 15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases

16 Chapter 16: Dental Emergencies, Anesthesia & Sedation Support

16.1 Local Anesthesia Armamentarium, Injection Techniques & Complications 16.2 Inhalation Analgesia, Nitrous Oxide Protocols & Conscious Sedation 16.3 Medical Emergency Protocols, Recognition & Life Support Algorithms

17 Chapter 17: Practice Administration, Inventory & Occupational Safety

17.1 Appointment Book Matrix, Clinical Scheduling & Preventive Recall Systems 17.2 Canadian Dental Benefits, Procedure Coding & Financial Management 17.3 WHMIS 2015/GHS, Hazardous Waste & Sharps Exposure Protocols 17.4 Filing and Inventory Systems, Equipment Records, Financial Records, Referrals & Office Policies

18 Chapter 18: Preventive Dentistry, Plaque Biofilm & Oral Hygiene Instruction

18.1 Caries Pathogenesis, Plaque Demineralization & CAMBRA Protocols 18.2 Plaque Disclosing, Toothbrushing Methods & Interdental Cleansing Aids 18.3 Nutritional Foundations, Cariogenicity & Dietary Risk Counselling

19 Chapter 19: Coronal Polishing, Fluoride, Sealants & Desensitizing Agents

19.1 Coronal Polishing Principles, Selective Polishing & Clinical Technique 19.2 Fluoride Chemistry, Remineralization Science & Toxicity Protocols 19.3 Pit & Fissure Sealant Armamentarium, Placement & Clinical Evaluation 19.4 Dentin Hypersensitivity & Desensitizing Agents

7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation

Key Takeaways Explain This Topic AI

The FDI Two-Digit system is the national standard for dental notation in Canada: the first digit designates the quadrant (1 to 4 for permanent, 5 to 8 for primary clockwise from upper right) and the second digit designates the tooth position (1 to 8 from midline, or 1 to 5 for primary).

Clinical charting follows universal color coding: Blue or Black indicates completed, stable restorations and normal anatomical baselines, whereas Red indicates active disease, primary caries, recurrent caries, defective restorations, and planned future treatment.

Specific charting symbols provide standardized visual shorthand: solid fill for amalgam (blue/black) and caries (red), outlined contours for composite resins, diagonal parallel hatching for gold, apical circles for periapical abscesses, and vertical lines through roots for endodontic therapy.

Comprehensive periodontal documentation records 6 probing sites per tooth (distobuccal, buccal, mesiobuccal, distolingual, lingual, mesiolingual); probing depths ≥ 4 mm indicate periodontal pockets, with bleeding on probing (BOP) serving as the primary objective indicator of active marginal inflammation.

Clinical Attachment Loss (CAL) measures periodontal tissue destruction from the fixed cementoenamel junction (CEJ) to the base of the pocket (CAL = Probing Depth + Gingival Recession), supplemented by Glickman furcation classifications (Class I to IV) and Miller mobility grades (Class I to III).

Last updated: October 2026

7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation

Dental charting is the standardized graphic and alphanumeric documentation of a patient's complete oral condition. As an indispensable component of the patient's permanent legal record, the dental chart serves as a diagnostic roadmap, a clinical treatment planning guide, a forensic identification record, and a legal instrument in civil litigation and professional regulatory proceedings. Dental assistants in Canada must master the Fédération Dentaire Internationale (FDI) Two-Digit System, clinical color-coding conventions, specialized restorative charting symbols, and comprehensive periodontal recording metrics.

Clinical Charting Modalities: Anatomical vs. Geometric

In both traditional paper charts and modern Electronic Dental Record (EDR) software, dental conditions are charted using one of two primary visual modalities:

1. Anatomical Charting Systems

Design: Displays realistic graphical illustrations of the exact anatomical morphology of tooth crowns and roots from facial/buccal, lingual/palatal, and occlusal/incisal perspectives.

Clinical Utility: Superior for charting complex periodontal bone loss, root canal therapy, apicoectomies, root fractures, furcation involvements, impacted roots, and surgical implants. Anatomical representations illustrate the spatial relationship between roots and surrounding structures (e.g., maxillary sinus floor, mandibular canal).

2. Geometric Charting Systems

Design: Represents each tooth as a simplified geometric diagram—typically a circle or square divided into five distinct compartments representing the five primary anatomical tooth surfaces: central compartment represents the occlusal or incisal surface, bordered by four outer compartments representing the mesial, distal, facial/buccal, and lingual surfaces.

Clinical Utility: Highly streamlined and efficient for recording surface-specific operative and restorative procedures (e.g., Class I occlusal amalgams, Class II mesio-occlusal composites).

The FDI Two-Digit Tooth Notation System (Canadian Standard)

Adopted by the Canadian Dental Association (CDA), the National Dental Assisting Examining Board (NDAEB), and the International Organization for Standardization (ISO 3950), the FDI (Fédération Dentaire Internationale) Two-Digit System is the universal standard across Canada.

Quadrant Numbering Architecture

The oral cavity is divided into four quadrants by a vertical median sagittal line (dividing left and right arches) and a horizontal occlusal plane (dividing maxillary and mandibular arches). Quadrants are numbered clockwise from the operator's perspective facing the patient : PATIENT'S MAXILLARY RIGHT | PATIENT'S MAXILLARY LEFT

  • |
  • Quadrant 1 | Quadrant 2
  • (Permanent Max Right) | (Permanent Max Left)
  • Quadrant 5 | Quadrant 6
  • (Primary Max Right) | (Primary Max Left)
  • ------------------------+-------------------------
  • Quadrant 4 | Quadrant 3
  • (Permanent Mand Right)| (Permanent Mand Left)
  • Quadrant 8 | Quadrant 7
  • (Primary Mand Right) | (Primary Mand Left)
  • |
  • PATIENT'S MANDIBULAR RIGHT | PATIENT'S MANDIBULAR LEFT
  • Permanent Dentition (Quadrants 1 to 4)

First Digit (Quadrant):

  • 1: Maxillary Right Quadrant
  • 2: Maxillary Left Quadrant
  • 3: Mandibular Left Quadrant
  • 4: Mandibular Right Quadrant

Second Digit (Tooth Position from Midline):

  • 1: Central Incisor
  • 2: Lateral Incisor
  • 3: Canine (Cuspid)
  • 4: First Premolar (Bicuspid)
  • 5: Second Premolar (Bicuspid)
  • 6: First Molar (6-year molar)
  • 7: Second Molar (12-year molar)
  • 8: Third Molar (Wisdom tooth)

Clinical Pronunciation Rule: The two digits are always pronounced as individual numbers , never as a combined cardinal number. For example, tooth 16 is pronounced "one-six" (never "sixteen" ); tooth 47 is pronounced "four-seven" (never "forty-seven" ).

Primary / Deciduous Dentition (Quadrants 5 to 8)

First Digit (Quadrant):

  • 5: Maxillary Right Primary Quadrant
  • 6: Maxillary Left Primary Quadrant
  • 7: Mandibular Left Primary Quadrant
  • 8: Mandibular Right Primary Quadrant

Second Digit (Tooth Position from Midline):

  • 1: Primary Central Incisor
  • 2: Primary Lateral Incisor
  • 3: Primary Canine
  • 4: Primary First Molar
  • 5: Primary Second Molar

Clinical Pronunciation Rule: Tooth 55 is pronounced "five-five" (never "fifty-five" ); tooth 74 is pronounced "seven-four" .

Standard Clinical Color-Coding Conventions

Universal color-coding provides an instantaneous visual distinction between conditions that have already been treated and conditions that require clinical intervention:

1. Blue or Black Ink

Clinical Significance: Identifies existing, completed, clinically sound restorations , completed dental treatments, and healthy physiological baselines.

Examples: Sound amalgam restorations, intact composite fillings, cemented crowns, completed endodontic obturations, healed extracted sockets, and congenitally missing teeth.

2. Red Ink

Clinical Significance: Identifies active pathology, active carious lesions, defective restorations, failed endodontic treatments , and all proposed / planned future treatments requiring scheduling.

Examples: Primary caries, recurrent/secondary caries, cracked teeth, periapical abscesses, fractured restorations, planned extractions, and proposed crowns.

Standardized Restorative & Pathological Charting Symbols

Standard clinical symbols provide a universal visual shorthand across Canadian dental practices:

1. Restorative Materials & Prosthodontic Symbols

Amalgam Restoration: Outlined and filled in solid blue or black on the exact anatomical surfaces involved (e.g., solid blue occlusal-lingual on tooth 16).

Composite Resin Restoration: Outlined in blue or black following the contours of the affected surfaces without filling the interior (reflecting the tooth-colored nature of resin).

Gold Inlay / Onlay / Full Cast Gold Crown: Outlined with diagonal parallel hatching lines in blue/black across the involved surface or entire anatomical crown.

Porcelain / Ceramic Crown: Outlined crown with internal cross-hatching or stippling/dots in blue/black .

Porcelain-Fused-to-Metal (PFM) Crown: Outlined crown with diagonal hatching on the lingual/margin (representing the metal substructure) and an open/dotted facial surface (representing the porcelain veneer).

Stainless Steel Crown (SSC): Outlined crown with the letters "SS" written in the center or a criss-cross hatched pattern in blue/black (frequently placed on primary molars).

Veneer: Outlined facial surface with dotted/cross-hatched pattern in blue/black.

Fixed Partial Denture (Bridge): Abutment teeth charted with their respective crown symbols; pontic teeth charted with full crown outline; all units linked by connecting lines across the interproximal spaces in blue/black.

2. Pathological Conditions & Treatment Requirements

Primary Carious Lesion (Incipient or Cavitated): Outlined and filled in solid RED on the affected anatomical surfaces.

Recurrent / Secondary Caries: Existing restoration charted in blue/black, with a bold RED outline drawn around the margin of the existing restoration indicating new caries developing beneath or adjacent to the restoration.

Defective Restoration: Existing restoration charted in blue/black, with a red notation or red "X" placed across the restoration indicating structural breakdown, open margins, or overhang.

Periapical Abscess / Radiolucency: A solid or open RED circle drawn at the apex of the involved root .

Root Canal Therapy (RCT):

Completed RCT: A solid blue/black vertical line drawn down the center of each root canal from chamber to apex.

Planned / Indicated RCT: A solid RED vertical line drawn down the center of each root canal.

Missing Tooth (Previously Extracted or Congenitally Absent): A single clean diagonal black/blue line or a neat "X" drawn through the entire tooth (crown and root).

Tooth Indicated for Extraction: A bold RED diagonal line or bold RED "X" drawn through the entire tooth.

Impacted / Unerupted Tooth: A complete circle drawn in red (if requiring surgical exposure/extraction) or blue (if asymptomatic/monitoring) enclosing the entire tooth (crown and root).

Fractured Tooth / Cusp: A jagged red zig-zag line drawn across the anatomical surface corresponding to the fracture line.

3. Positional Variants & Arch Relationships

Diastema: Two parallel vertical lines ( || ) drawn between the contacting proximal surfaces of the adjacent separated teeth.

Tipped / Drifted Tooth: A straight horizontal arrow drawn over the crown pointing in the direction of drifting (arrow pointing toward midline = mesial drift; pointing away from midline = distal drift).

Rotated Tooth: A curved arrow drawn above or on the occlusal surface indicating the direction of rotation (clockwise or counter-clockwise).

Supernumerary Tooth: An extra tooth drawn in its approximate anatomical position, designated with an "S" symbol.

Comprehensive Periodontal Charting Parameters

Periodontal charting records quantitative and qualitative metrics to diagnose periodontal health, gingivitis, or periodontitis under the AAP/EFP (American Academy of Periodontology / European Federation of Periodontology) classification system. BUCCAL ASPECT LINGUAL ASPECT

  • +-------------+-------------+ +-------------+-------------+
  • | Distobuccal | Mid-Buccal | Mesiobuccal | | Distolingual| Mid-Lingual | Mesiolingual|
  • | (DB) | (B) | (MB) | | (DL) | (L) | (ML) |
  • +-------------+-------------+-------------+ +-------------+-------------+-------------+
  • | Site 1 | Site 2 | Site 3 | | Site 4 | Site 5 | Site 6 |
  • +-------------+-------------+-------------+ +-------------+-------------+-------------+
  • 1. Six-Point Probing Depth (PD) Measurement

Probing depth is measured from the free gingival margin (FGM) to the base of the gingival sulcus or periodontal pocket using a calibrated, millimeter-marked periodontal probe (such as the Williams probe, Marquis probe, or UNC-15 probe).

Six Standard Measurement Sites per Tooth:

Distobuccal (DB): From the distal contact point to the distobuccal line angle.

Mid-Buccal (B): Across the central facial surface.

Mesiobuccal (MB): From the mesial line angle to the mesial contact point.

Distolingual (DL): From the distal contact point to the distolingual line angle.

Mid-Lingual (L): Across the central lingual/palatal surface.

Mesiolingual (ML): From the mesial line angle to the mesial contact point.

Probing Technique: The probe is inserted into the sulcus parallel to the long axis of the tooth and gently "walked" (bobbing motion in 1 mm increments) around the circumference of the tooth. At interproximal contact areas, the probe is angled slightly (approximately 10°–15°) into the col area beneath the contact point to reach the deepest pocket depth.

Diagnostic Interpretation:

Normal / Healthy Sulcus: 1 to 3 mm , firm tissue, zero bleeding.

Periodontal Pocket: ≥ 4 mm . Pocket depths ≥ 4 mm represent pathological deepening of the sulcus resulting from apical migration of the junctional epithelium (true pocket) or gingival tissue enlargement (pseudopocket). Depths ≥ 4 mm are routinely charted or highlighted in red ink.

2. Bleeding on Probing (BOP)

Bleeding on probing occurs when the probe tip contacts ulcerated, chronically inflamed microvasculature within the sulcular pocket epithelium under gentle probing force (approximately 20 to 25 grams, equivalent to the force required to slightly blanch the thumbnail).

Recording: Charted as a red dot or red highlight at the specific probing site.

Clinical Significance: BOP is the single most reliable, objective clinical indicator of active marginal and subgingival inflammation . The absence of BOP is an exceptional prognostic indicator of periodontal stability.

3. Clinical Attachment Level (CAL) / Clinical Attachment Loss

While probing depth measures the distance from the movable gingival margin to the pocket base, the gingival margin fluctuates due to inflammation, swelling, or recession. Therefore, Clinical Attachment Loss (CAL) is the true measure of cumulative periodontal tissue and alveolar bone destruction, measured from a fixed anatomical landmark: the Cementoenamel Junction (CEJ) .

The Three Clinical Calculations for CAL

Gingival Recession Present (Gingival margin is APICAL to the CEJ):

The CEJ is clinically visible.

Formula: CAL = Probing Depth (PD) + Gingival Recession (GR) \text{CAL} = \text{Probing Depth (PD)} + \text{Gingival Recession (GR)} CAL = Probing Depth (PD) + Gingival Recession (GR)

Example: Probing depth is 4 mm; gingival recession is 3 mm.

CAL = 4 mm + 3 mm = 7 mm of attachment loss . \text{CAL} = 4\,\text{mm} + 3\,\text{mm} = 7\,\text{mm}\text{ of attachment loss}. CAL = 4 mm + 3 mm = 7 mm of attachment loss .

Normal Gingival Position (Gingival margin is exactly AT the CEJ):

Formula: CAL = Probing Depth (PD) \text{CAL} = \text{Probing Depth (PD)} CAL = Probing Depth (PD)

Example: Probing depth is 5 mm; recession is 0 mm.

CAL = 5 mm of attachment loss . \text{CAL} = 5\,\text{mm}\text{ of attachment loss}. CAL = 5 mm of attachment loss .

Gingival Overgrowth / Hyperplasia / Pseudopocket (Gingival margin is CORONAL to the CEJ):

Gingival tissue covers the CEJ due to drug-induced hyperplasia (e.g., phenytoin, cyclosporine, nifedipine) or severe edematous swelling.

Formula: CAL = Probing Depth (PD) − Gingival Height Coronal to CEJ \text{CAL} = \text{Probing Depth (PD)} - \text{Gingival Height Coronal to CEJ} CAL = Probing Depth (PD) − Gingival Height Coronal to CEJ

Example: Probing depth is 6 mm; gingival margin extends 2 mm coronal to the CEJ.

CAL = 6 mm − 2 mm = 4 mm of true attachment loss . \text{CAL} = 6\,\text{mm} - 2\,\text{mm} = 4\,\text{mm}\text{ of true attachment loss}. CAL = 6 mm − 2 mm = 4 mm of true attachment loss .

4. Furcation Involvement (Glickman Classification)

Furcation involvement occurs when periodontal bone resorption extends into the bi- or trifurcation of multi-rooted teeth (maxillary molars, mandibular molars, and maxillary first premolars). It is assessed using a curved, blunt-ended Nabers furcation probe .

Glickman Class Pathological Extent Nabers Probe Penetration Charting Symbol

Class I Incipient bone loss in the furcation fluting. Probe detects the furcation concavity; can enter the fluting but cannot penetrate horizontal bone between roots. Open inverted caret / V ( ^ )

Class II Cul-de-sac / Partial penetration. Probe penetrates horizontally >1 mm into the furcation roof, but cannot pass through to the opposite side. Open outline triangle ( △ )

Class III Complete through-and-through bone loss. Probe passes completely through the furcation between roots from buccal to lingual (or between all three roots of maxillary molars), but the furcation entrance is obscured by overlying gingival tissue . Solid filled triangle ( ▲ )

Class IV Clinically visible through-and-through defect. Complete through-and-through bone loss where gingival recession leaves the furcation tunnel completely exposed and clinically visible . Solid filled triangle ( ▲ ) with recession or diamond

5. Tooth Mobility (Miller Classification)

Tooth mobility evaluates the functional integrity of the periodontal ligament (PDL) and alveolar housing. Mobility must ALWAYS be evaluated using two rigid instrument handles (e.g., the blunt ends of two mouth mirrors). Fingers must never be used because resilient finger pads compress, giving a false impression of movement.

Class I Mobility: The first distinguishable sign of movement greater than normal (physiologic) mobility.

Class II Mobility: Movement of the crown of about 1 mm in any direction .

Class III Mobility: Movement of more than 1 mm in any direction, and/or vertical depression or rotation of the tooth in its socket.

Recording Extraoral and Intraoral Examination Findings

Competency 4.2.3 asks the assistant to record intra-oral and extra-oral examination findings and diagnoses accurately. The dentist examines the patient and makes the diagnosis. The assistant records what the dentist reports, in the dentist's words, with the date.

Extraoral findings: facial symmetry, skin lesions, the lips and vermilion border, TMJ sounds, deviation or tenderness, and the cervical lymph nodes (size, consistency, tenderness, mobility; section 3.4).

Intraoral soft tissues: buccal and labial mucosa, tongue, floor of the mouth, palate, oropharynx and gingiva. For any lesion, record:

  • its location (using landmarks and FDI tooth numbers)
  • size in millimetres
  • colour, shape, surface texture and consistency
  • whether it is raised, flat or ulcerated

the duration reported by the patient.

Hard tissues: existing restorations, caries, missing teeth, fractures and wear, charted with the office's symbols and colour code.

Occlusion: molar and canine classification, overjet, overbite and crossbites when the dentist reports them (section 15.1).

Diagnoses and referrals: record the dentist's diagnosis (for example, "irreversible pulpitis 36" or "localized gingivitis") and any biopsy or referral. Use only accepted abbreviations, and never add your own interpretation.

Loading diagram... Clinical Attachment Loss (CAL) Calculations Across Clinical Variations