Study guide
10.4 Cavity Classification & Cavity Preparation Terminology
NDAEB Theory Examination Canada
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Foundations
1.1 NDAEB Exam Structure, Logistics & Candidate Regulations 1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology
2 Chapter 2: Professional Ethics, Jurisprudence & Scope of Practice
2.1 CDAA Code of Ethics & Ethical Decision-Making 2.2 Provincial Dental Assisting Regulation & Scope of Practice 2.3 Informed Consent, Documentation & Professional Liability 2.4 Abuse and Neglect Reporting, Conflicts of Interest & Patients with Infectious Diseases
3 Chapter 3: Oral Anatomy, Histology & Tooth Morphology
3.1 Craniofacial Osteology, Muscles of Mastication & Salivary Glands 3.2 Odontogenesis, Dental Hard Tissues & the Periodontium 3.3 Tooth Morphology, Dentition Comparison & Eruption Chronology 3.4 Oral and Facial Landmarks, Facial and Tongue Muscles, Paranasal Sinuses & Cervical Lymph Nodes
4 Chapter 4: Oral Microbiology, Pathology & Pharmacology Basics
4.1 Oral Microbiology, Biofilm Ecology & Caries Pathogenesis 4.2 Diagnostic Terminology, Mucosal Lesions & Oral Pathology 4.3 Dental Pharmacology, Local Anesthetics & Medical Drug Considerations 4.4 Prescriptions, Abbreviations, Over-the-Counter & Recreational Drugs
5 Chapter 5: Infection Prevention and Control (IPAC) & Asepsis
5.1 The Chain of Infection, Routine Practices & Personal Protective Equipment 5.2 Environmental Surface Asepsis, Barriers & Operatory Decontamination 5.3 Dental Unit Waterlines, Biofilm Management & Aseptic Water Protocols 5.4 Infection Prevention Across Care Settings, Laboratory Asepsis & Employee Health Records
6 Chapter 6: Instrument Processing & Sterilization Monitoring
6.1 Instrument Classification, Decontamination & Packaging Protocols 6.2 Heat Sterilization Modalities, Cycle Parameters & Instrument Care 6.3 Physical, Chemical & Biological Sterilization Quality Assurance
7 Chapter 7: Patient Assessment, Vital Signs & Dental Charting
7.1 Health History Assessment, Medical Alerts & Baseline Vital Signs 7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation 7.3 Electronic Dental Records, Legal Standards & Retention Mandates
8 Chapter 8: Dental Radiography & Radiation Protection
8.1 Radiation Physics, Biological Hazards & Safety Code 30 Compliance 8.2 Geometric Principles, Intraoral Projections & Digital Sensor Systems 8.3 Radiographic Anatomy, Labial Mounting & Quality Troubleshooting 8.4 Receptor Care, Patient Preparation, Image Management & Radiographic Anomalies
9 Chapter 9: Chairside Assisting, Ergonomics & Moisture Control
9.1 Four-Handed Dentistry, Operating Zones & Musculoskeletal Ergonomics 9.2 Instrument Grasps, Transfer Mechanics & Sharps Safety 9.3 High-Volume Evacuation, Cotton Roll Isolation & Moisture Control Aids 9.4 Dental Dam: Selection, Punching, Placement Errors & Removal 9.5 Operator Ergonomics, Instrumentation Technique & Musculoskeletal Disorder Prevention
10 Chapter 10: Restorative Materials, Cavity Preparation & Tooth Whitening
10.1 Pulpal Protection, Cavity Liners, Bases & Adhesive Systems 10.2 Dental Amalgam Metallurgy, Composite Resins & Curing Protocols 10.3 Matrix Systems, Retainers, Wedges & Interproximal Contouring 10.4 Cavity Classification & Cavity Preparation Terminology 10.5 Vital and Non-Vital Tooth Whitening
11 Chapter 11: Impression Materials & Laboratory Support
11.1 Impression Material Science, Tray Selection & Clinical Manipulation 11.2 Gypsum Chemistry, Model Pouring & Cast Trimming Principles 11.3 Provisional Restorations, Custom Trays & Laboratory Fabrication 11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries
12 Chapter 12: Fixed & Removable Prosthodontics Assisting
12.1 Crown & Bridge Preparation, Gingival Retraction & Definitive Cementation 12.2 Removable Partial & Complete Dentures, Clinical Stages & Home Care 12.3 Dental Implant Systems, Osseointegration & Clinical Maintenance 12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management
13 Chapter 13: Endodontics & Periodontics Specialty Assisting
13.1 Endodontic Diagnostics, Pathosis & Biomechanical Canal Instrumentation 13.2 Canal Obturation Science, Surgical Endodontics & Tooth Resection 13.3 Periodontal Assessment, Non-Surgical Therapy & Periodontal Surgery 13.4 The Periodontal Disease Process, the 2017 Classification & Plaque and Gingival Indices
14 Chapter 14: Oral Surgery & Suture Care Assisting
14.1 Surgical Asepsis, Elevator Biomechanics & Extraction Armamentarium 14.2 Clinical Exodontia Procedures, Suture Materials & Suture Removal 14.3 Post-Surgical Home Care, Hemostasis & Alveolar Osteitis Management
15 Chapter 15: Orthodontics, Pediatric & Special Needs Patient Care
15.1 Malocclusion Classification, Diagnostic Records & Fixed Appliances 15.2 Pediatric Behavior Guidance, Pulp Therapy & Stainless Steel Crowns 15.3 Appliance Debonding, Retention Protocols & Pediatric Trauma Management 15.4 Special Needs Patient Management: Older Adults, Pregnancy & Medical, Physical or Cognitive Conditions 15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases
16 Chapter 16: Dental Emergencies, Anesthesia & Sedation Support
16.1 Local Anesthesia Armamentarium, Injection Techniques & Complications 16.2 Inhalation Analgesia, Nitrous Oxide Protocols & Conscious Sedation 16.3 Medical Emergency Protocols, Recognition & Life Support Algorithms
17 Chapter 17: Practice Administration, Inventory & Occupational Safety
17.1 Appointment Book Matrix, Clinical Scheduling & Preventive Recall Systems 17.2 Canadian Dental Benefits, Procedure Coding & Financial Management 17.3 WHMIS 2015/GHS, Hazardous Waste & Sharps Exposure Protocols 17.4 Filing and Inventory Systems, Equipment Records, Financial Records, Referrals & Office Policies
18 Chapter 18: Preventive Dentistry, Plaque Biofilm & Oral Hygiene Instruction
18.1 Caries Pathogenesis, Plaque Demineralization & CAMBRA Protocols 18.2 Plaque Disclosing, Toothbrushing Methods & Interdental Cleansing Aids 18.3 Nutritional Foundations, Cariogenicity & Dietary Risk Counselling
19 Chapter 19: Coronal Polishing, Fluoride, Sealants & Desensitizing Agents
19.1 Coronal Polishing Principles, Selective Polishing & Clinical Technique 19.2 Fluoride Chemistry, Remineralization Science & Toxicity Protocols 19.3 Pit & Fissure Sealant Armamentarium, Placement & Clinical Evaluation 19.4 Dentin Hypersensitivity & Desensitizing Agents
10.4 Cavity Classification & Cavity Preparation Terminology
Key Takeaways Explain This Topic AI
Under G.V. Black's classification, Class II lesions involve proximal surfaces of premolars and molars, while Class III and IV involve proximal surfaces of incisors and canines.
A Class IV lesion includes the incisal angle of an anterior tooth, whereas a Class III lesion leaves the incisal angle intact.
Class V lesions are in the gingival third of the facial or lingual surface of any tooth, and Class VI lesions involve incisal edges or cusp tips.
A line angle is where two preparation walls meet and a point angle is where three meet; the pulpal wall is perpendicular, and the axial wall parallel, to the tooth's long axis.
Black's preparation steps are outline, resistance, retention and convenience form, then removal of remaining caries, finishing the walls and cleaning the preparation.
Last updated: October 2026
10.4 Cavity Classification & Cavity Preparation Terminology
Quick Answer: Competencies 5.7.1 and 5.7.2 require you to classify lesions and restorations, and to use cavity preparation terminology correctly. Under G.V. Black's classification :
- Class I: pits and fissures
- Class II: proximal surfaces of premolars and molars
- Class III: proximal surfaces of incisors and canines, not including the incisal angle
- Class IV: proximal surfaces of incisors and canines including the incisal angle
- Class V: gingival third of facial or lingual surfaces
Class VI (added later): incisal edges and cusp tips.
Preparations have walls (pulpal, axial, gingival and external walls named for the tooth surface), line angles (two walls meeting), point angles (three walls) and a cavosurface margin . Black's steps include outline, resistance, retention and convenience form .
1. G.V. Black's Classification
Class Location of the lesion or restoration Typical teeth / examples Chartable surfaces
Class I Pits and fissures: occlusal surfaces of premolars and molars, buccal and lingual pits of molars, lingual pits of maxillary incisors Occlusal of 46 (O); lingual pit of 12 (L) O, B pit, L pit
Class II Proximal surfaces of premolars and molars MO on 25; DO on 36; MOD on 16 M and/or D, usually with O
Class III Proximal surfaces of incisors and canines, incisal angle intact Distal of 21; mesial of 33 M or D (often with F or L access)
Class IV Proximal surfaces of incisors and canines involving the incisal angle Fractured mesioincisal corner of 11 MI or DI
Class V Gingival (cervical) third of the facial or lingual surface of any tooth (smooth surface, not a pit) Cervical caries or abfraction on the buccal of 44 F (B) or L
Class VI Incisal edges of anterior teeth and cusp tips of posterior teeth (wear or developmental defects) Worn cusp tip of 26 I or cusp tip
Naming by number of surfaces:
A simple cavity involves one surface (O, F).
A compound cavity involves two surfaces (MO, DO, DL).
A complex cavity involves three or more surfaces (MOD, MODBL).
Surfaces are written in the order mesial or distal first, then occlusal or incisal, then facial or lingual (for example, MOD, DOL). Combined with FDI notation, an example chart entry is "36 MOD composite". The same letters are used when charting existing restorations (Domain 4).
2. Walls, Angles and Margins
Term Definition Example
Pulpal wall (floor) Internal wall perpendicular to the long axis of the tooth, over the pulp The floor of a Class I occlusal preparation
Axial wall Internal wall parallel to the long axis of the tooth The inner wall of a Class II proximal box, or the inner wall of a Class V preparation
Gingival wall (seat) The floor of a proximal box, nearest the gingiva Where the matrix band and wedge must seal (section 10.3)
External (surrounding) walls Walls named for the tooth surface they are next to: mesial, distal, buccal/facial, lingual Buccal wall of a Class I preparation
Line angle The line where two walls meet, named by combining the walls (with "-o-" joining them) Axiopulpal, distopulpal, axiogingival line angles
Point angle The point where three walls meet Axio-bucco-gingival point angle
Cavosurface margin The junction of a preparation wall with the outer surface of the tooth Where restorative material must seal; may be bevelled for composite
Isthmus The narrow connection between the occlusal portion and the proximal box of a Class II preparation A common fracture site in amalgam restorations
3. Principles of Cavity Preparation (Black's Steps)
Outline form: the shape and extent of the preparation at the tooth surface. It is determined by the extent of the caries and, today, by the principle of conserving tooth structure.
Resistance form: the shape that helps the tooth and the restoration withstand chewing forces without fracturing. Examples include flat floors, rounded internal angles and adequate thickness of material.
Retention form: features that keep the restoration from dislodging. Examples include converging walls or undercuts for amalgam, retention grooves or slots, pins in extensive preparations, and micromechanical bonding for composite.
Convenience form: modifications that give the operator access and visibility, for example widening for instrument access.
Removal of remaining carious dentin: with spoon excavators or slow-speed round burs. In deep lesions the dentist may leave some affected dentin over the pulp (indirect pulp capping; section 10.1).
Finishing the enamel walls and margins: smoothing and, where indicated, bevelling the margins.
Cleaning (debridement) of the preparation: rinsing and drying before liners, bases, adhesives or restorative material are placed.
Black's original rule of " extension for prevention " extended outlines into self-cleansing areas. Minimally invasive dentistry has largely replaced it, using conservative outlines, adhesive materials and sealants. Examples are slot (box-only) preparations, preventive resin restorations and conservative Class V preparations.
- 4. Instruments Associated with Cavity Preparation
- Rotary cutting instruments (burs)
- Bur shape Common numbers Use
- Round #¼, #½, #1, #2, #4, #6, #8 Initial entry, removing caries, retention points
- Inverted cone #33½, #34, #35, #37 Undercuts, flattening floors
- Straight fissure (plain / cross-cut) #56–#58 / #556–#558 Extending outlines, walls
- Tapered fissure (plain / cross-cut) #169–#171 / #699–#703 Walls that converge; crown preparation
- Pear #330–#333, #245 Class I and II amalgam preparations (rounded internal angles)
- Diamond and finishing burs Various shapes and grits Bevelling, crown preparation, finishing composites
Shank types: friction-grip (FG) for high-speed handpieces; latch-type for low-speed contra-angles; straight for low-speed straight handpieces and lab work.
Hand cutting instruments
Spoon excavators: remove soft carious dentin and temporary material.
Enamel hatchets and chisels (straight, Wedelstaedt, binangle): cleave unsupported enamel and plane walls. Chisels are used with a push stroke.
Hoes: plane floors and walls with a pull stroke.
Gingival margin trimmers (GMT) (paired mesial and distal): bevel and smooth the gingival margin of Class II boxes.
5. Why the Assistant Needs This Vocabulary
Anticipating the tray: a Class II preparation calls for a matrix, wedges, a burnisher and the proximal-box instruments. A Class V preparation may need a gingival retraction cord or a cervical clamp (#212). A Class IV preparation needs a clear strip or a crown form and a shade guide.
Charting and progress notes: "Class II DO amalgam on 25" must match the surfaces charted and the procedure codes billed.
Communicating with the operator: for example, "Axial wall depth looks close to the pulp. Would you like a liner?" Using the correct terms keeps chairside communication fast and accurate.