Study guide
11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries
NDAEB Theory Examination Canada
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Foundations
1.1 NDAEB Exam Structure, Logistics & Candidate Regulations 1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology
2 Chapter 2: Professional Ethics, Jurisprudence & Scope of Practice
2.1 CDAA Code of Ethics & Ethical Decision-Making 2.2 Provincial Dental Assisting Regulation & Scope of Practice 2.3 Informed Consent, Documentation & Professional Liability 2.4 Abuse and Neglect Reporting, Conflicts of Interest & Patients with Infectious Diseases
3 Chapter 3: Oral Anatomy, Histology & Tooth Morphology
3.1 Craniofacial Osteology, Muscles of Mastication & Salivary Glands 3.2 Odontogenesis, Dental Hard Tissues & the Periodontium 3.3 Tooth Morphology, Dentition Comparison & Eruption Chronology 3.4 Oral and Facial Landmarks, Facial and Tongue Muscles, Paranasal Sinuses & Cervical Lymph Nodes
4 Chapter 4: Oral Microbiology, Pathology & Pharmacology Basics
4.1 Oral Microbiology, Biofilm Ecology & Caries Pathogenesis 4.2 Diagnostic Terminology, Mucosal Lesions & Oral Pathology 4.3 Dental Pharmacology, Local Anesthetics & Medical Drug Considerations 4.4 Prescriptions, Abbreviations, Over-the-Counter & Recreational Drugs
5 Chapter 5: Infection Prevention and Control (IPAC) & Asepsis
5.1 The Chain of Infection, Routine Practices & Personal Protective Equipment 5.2 Environmental Surface Asepsis, Barriers & Operatory Decontamination 5.3 Dental Unit Waterlines, Biofilm Management & Aseptic Water Protocols 5.4 Infection Prevention Across Care Settings, Laboratory Asepsis & Employee Health Records
6 Chapter 6: Instrument Processing & Sterilization Monitoring
6.1 Instrument Classification, Decontamination & Packaging Protocols 6.2 Heat Sterilization Modalities, Cycle Parameters & Instrument Care 6.3 Physical, Chemical & Biological Sterilization Quality Assurance
7 Chapter 7: Patient Assessment, Vital Signs & Dental Charting
7.1 Health History Assessment, Medical Alerts & Baseline Vital Signs 7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation 7.3 Electronic Dental Records, Legal Standards & Retention Mandates
8 Chapter 8: Dental Radiography & Radiation Protection
8.1 Radiation Physics, Biological Hazards & Safety Code 30 Compliance 8.2 Geometric Principles, Intraoral Projections & Digital Sensor Systems 8.3 Radiographic Anatomy, Labial Mounting & Quality Troubleshooting 8.4 Receptor Care, Patient Preparation, Image Management & Radiographic Anomalies
9 Chapter 9: Chairside Assisting, Ergonomics & Moisture Control
9.1 Four-Handed Dentistry, Operating Zones & Musculoskeletal Ergonomics 9.2 Instrument Grasps, Transfer Mechanics & Sharps Safety 9.3 High-Volume Evacuation, Cotton Roll Isolation & Moisture Control Aids 9.4 Dental Dam: Selection, Punching, Placement Errors & Removal 9.5 Operator Ergonomics, Instrumentation Technique & Musculoskeletal Disorder Prevention
10 Chapter 10: Restorative Materials, Cavity Preparation & Tooth Whitening
10.1 Pulpal Protection, Cavity Liners, Bases & Adhesive Systems 10.2 Dental Amalgam Metallurgy, Composite Resins & Curing Protocols 10.3 Matrix Systems, Retainers, Wedges & Interproximal Contouring 10.4 Cavity Classification & Cavity Preparation Terminology 10.5 Vital and Non-Vital Tooth Whitening
11 Chapter 11: Impression Materials & Laboratory Support
11.1 Impression Material Science, Tray Selection & Clinical Manipulation 11.2 Gypsum Chemistry, Model Pouring & Cast Trimming Principles 11.3 Provisional Restorations, Custom Trays & Laboratory Fabrication 11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries
12 Chapter 12: Fixed & Removable Prosthodontics Assisting
12.1 Crown & Bridge Preparation, Gingival Retraction & Definitive Cementation 12.2 Removable Partial & Complete Dentures, Clinical Stages & Home Care 12.3 Dental Implant Systems, Osseointegration & Clinical Maintenance 12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management
13 Chapter 13: Endodontics & Periodontics Specialty Assisting
13.1 Endodontic Diagnostics, Pathosis & Biomechanical Canal Instrumentation 13.2 Canal Obturation Science, Surgical Endodontics & Tooth Resection 13.3 Periodontal Assessment, Non-Surgical Therapy & Periodontal Surgery 13.4 The Periodontal Disease Process, the 2017 Classification & Plaque and Gingival Indices
14 Chapter 14: Oral Surgery & Suture Care Assisting
14.1 Surgical Asepsis, Elevator Biomechanics & Extraction Armamentarium 14.2 Clinical Exodontia Procedures, Suture Materials & Suture Removal 14.3 Post-Surgical Home Care, Hemostasis & Alveolar Osteitis Management
15 Chapter 15: Orthodontics, Pediatric & Special Needs Patient Care
15.1 Malocclusion Classification, Diagnostic Records & Fixed Appliances 15.2 Pediatric Behavior Guidance, Pulp Therapy & Stainless Steel Crowns 15.3 Appliance Debonding, Retention Protocols & Pediatric Trauma Management 15.4 Special Needs Patient Management: Older Adults, Pregnancy & Medical, Physical or Cognitive Conditions 15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases
16 Chapter 16: Dental Emergencies, Anesthesia & Sedation Support
16.1 Local Anesthesia Armamentarium, Injection Techniques & Complications 16.2 Inhalation Analgesia, Nitrous Oxide Protocols & Conscious Sedation 16.3 Medical Emergency Protocols, Recognition & Life Support Algorithms
17 Chapter 17: Practice Administration, Inventory & Occupational Safety
17.1 Appointment Book Matrix, Clinical Scheduling & Preventive Recall Systems 17.2 Canadian Dental Benefits, Procedure Coding & Financial Management 17.3 WHMIS 2015/GHS, Hazardous Waste & Sharps Exposure Protocols 17.4 Filing and Inventory Systems, Equipment Records, Financial Records, Referrals & Office Policies
18 Chapter 18: Preventive Dentistry, Plaque Biofilm & Oral Hygiene Instruction
18.1 Caries Pathogenesis, Plaque Demineralization & CAMBRA Protocols 18.2 Plaque Disclosing, Toothbrushing Methods & Interdental Cleansing Aids 18.3 Nutritional Foundations, Cariogenicity & Dietary Risk Counselling
19 Chapter 19: Coronal Polishing, Fluoride, Sealants & Desensitizing Agents
19.1 Coronal Polishing Principles, Selective Polishing & Clinical Technique 19.2 Fluoride Chemistry, Remineralization Science & Toxicity Protocols 19.3 Pit & Fissure Sealant Armamentarium, Placement & Clinical Evaluation 19.4 Dentin Hypersensitivity & Desensitizing Agents
11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries
Key Takeaways Explain This Topic AI
IRM is a polymer-reinforced zinc oxide-eugenol temporary that sedates the pulp and lasts longer than plain ZOE.
Cavit is a premixed temporary that sets on contact with moisture and needs about 3 to 4 mm of thickness to seal an endodontic access opening.
Eugenol inhibits resin polymerization, so eugenol-containing temporaries are avoided where a bonded composite restoration will be placed.
Glass ionomer interim restorations bond chemically to tooth structure and release fluoride, which suits high-caries-risk and young patients.
Occlusion and contacts are checked on every temporary, and floss is slid out sideways so that the fresh material is not dislodged.
Last updated: October 2026
11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries
Quick Answer: Competency 5.7.8 covers temporary (interim) restorative materials placed inside a cavity or access opening. Section 11.3 covers provisional crowns and bridges. Temporary fillings:
- sedate an inflamed pulp (zinc oxide-eugenol)
- seal endodontic access openings between visits
- control caries (glass ionomer interim restorations)
protect a tooth until the final restoration is placed.
The main materials are IRM (reinforced zinc oxide-eugenol), Cavit (a premixed material that sets with moisture and needs about 3 to 4 mm of thickness to seal), glass ionomer and light-cured resin temporaries . Eugenol materials must not be used where a bonded composite restoration will be placed later.
1. Why Temporary Restorations Are Placed (5.7.8.1)
Situation Purpose Usual material
Deep caries with a sensitive but vital pulp Calm the pulp (obtundent effect) and wait to see whether symptoms settle ZOE or IRM "sedative filling"
Between endodontic appointments Seal the access cavity to prevent saliva and bacterial leakage into the canals Cavit or IRM (often over a sterile cotton pellet or PTFE tape)
High caries risk, very young or uncooperative patients Remove soft caries and seal the tooth until definitive care (interim therapeutic restoration) Glass ionomer
Indirect inlay or onlay preparation Protect the preparation until the restoration returns from the lab Light-cured resin temporary or IRM
Lost or fractured restoration (emergency visit) Relieve sensitivity and protect the tooth until a scheduled appointment IRM or glass ionomer
Stepwise caries removal Seal the tooth for several months to allow tertiary dentin formation before final excavation Glass ionomer or IRM
2. Temporary Restorative Materials
Material Composition and set Advantages Limitations
IRM (Intermediate Restorative Material) Zinc oxide reinforced with polymer, mixed with eugenol; acid-base set Sedative to the pulp; stronger and longer-lasting than plain ZOE (months); easy to remove Eugenol inhibits resin polymerization, so avoid it under future composites; possible eugenol sensitivity
Plain ZOE temporary Zinc oxide and eugenol Excellent sedative effect Weak; wears quickly
Cavit (premixed temporary) Zinc oxide, calcium sulfate and other ingredients in a premixed paste; sets on contact with moisture and expands slightly No mixing; very good seal for endodontic access openings Low strength and wear resistance; needs about 3 to 4 mm thickness ; patient should avoid chewing on it for about an hour while it hardens
Glass ionomer (conventional or resin-modified) Fluoroaluminosilicate glass and polyacrylic acid Chemical bond to tooth; fluoride release; good for interim therapeutic restorations and children Sensitive to moisture during the early set; lower wear resistance than amalgam or composite
Light-cured resin temporary Flexible resin paste cured with the curing light Quick, no mixing, easy to remove in one piece No sedative effect; requires a curing light
3. Preparing and Mixing (5.7.8.2)
IRM powder and liquid:
Fluff the powder and dispense it with the measuring scoop.
Dispense the eugenol drops and replace the cap at once (eugenol evaporates and oxidizes).
On a paper pad or glass slab, incorporate the powder into the liquid in increments with a stiff spatula until the mix is a thick, putty-like consistency that does not stick to the gloved finger or instrument.
Follow the manufacturer's powder-liquid ratio and working time. Capsule versions are triturated instead.
Cavit: dispense directly from the tube or jar with a plastic instrument and recap immediately. It sets once in contact with moisture.
Glass ionomer: activate and triturate capsules, or mix powder and liquid according to the instructions. Place the material while it is still glossy.
Resin temporaries: dispense from the syringe and light-cure as directed.
4. Placement Sequence
Isolate with cotton rolls (or a dental dam for endodontics) and dry the cavity lightly. Glass ionomer needs a moist, not desiccated, surface.
For an endodontic access , place a sterile cotton pellet or PTFE tape over the canal orifices first, leaving enough room for 3 to 4 mm of temporary material above it.
For a proximal cavity , place a matrix band and wedge so that the temporary has a proper contour and does not leave an overhang.
Carry the material with a plastic filling instrument (PFI) in small increments and condense it into the cavity, working it against the walls to seal the margins.
Contour with a carver or the PFI, and smooth the surface with a moist cotton pellet. Remove excess from the margins and embrasures.
Check occlusion with articulating paper once the material is firm, and reduce high spots. A high temporary causes pain and fractures.
Check proximal contacts and margins with floss. With a fresh temporary, slide the floss out sideways rather than snapping it back up through the contact, which can dislodge the material.
Evaluate: the margins should be closed, with no overhang or voids, a comfortable bite and a smooth surface. Record the material, the tooth and the surfaces in the progress notes.
5. Removing a Temporary
At the next appointment, the temporary is removed with a spoon excavator, a scaler or a slow-speed bur. The cavity is then cleaned of all residue before the definitive restoration. Clean all eugenol residue carefully if a bonded restoration is planned. Glass ionomer temporaries are often partly kept as a base or liner if the dentist prefers.
6. Patient Instructions (5.7.8.3)
"This is a temporary filling. It is softer than a permanent one and is meant to last only until your next appointment."
Avoid chewing hard, crunchy or sticky foods on that side. With Cavit, do not eat on it for about an hour.
Brush normally. When flossing next to the temporary, slide the floss out sideways.
If the temporary breaks, falls out or feels high, or if pain, swelling or sensitivity increases, call the office.
Keep the appointment for the final restoration. A temporary left too long can leak or fracture, letting decay return or bacteria re-enter the canals.