Study guide

12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management

NDAEB Theory Examination Canada

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Foundations

1.1 NDAEB Exam Structure, Logistics & Candidate Regulations 1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology

2 Chapter 2: Professional Ethics, Jurisprudence & Scope of Practice

2.1 CDAA Code of Ethics & Ethical Decision-Making 2.2 Provincial Dental Assisting Regulation & Scope of Practice 2.3 Informed Consent, Documentation & Professional Liability 2.4 Abuse and Neglect Reporting, Conflicts of Interest & Patients with Infectious Diseases

3 Chapter 3: Oral Anatomy, Histology & Tooth Morphology

3.1 Craniofacial Osteology, Muscles of Mastication & Salivary Glands 3.2 Odontogenesis, Dental Hard Tissues & the Periodontium 3.3 Tooth Morphology, Dentition Comparison & Eruption Chronology 3.4 Oral and Facial Landmarks, Facial and Tongue Muscles, Paranasal Sinuses & Cervical Lymph Nodes

4 Chapter 4: Oral Microbiology, Pathology & Pharmacology Basics

4.1 Oral Microbiology, Biofilm Ecology & Caries Pathogenesis 4.2 Diagnostic Terminology, Mucosal Lesions & Oral Pathology 4.3 Dental Pharmacology, Local Anesthetics & Medical Drug Considerations 4.4 Prescriptions, Abbreviations, Over-the-Counter & Recreational Drugs

5 Chapter 5: Infection Prevention and Control (IPAC) & Asepsis

5.1 The Chain of Infection, Routine Practices & Personal Protective Equipment 5.2 Environmental Surface Asepsis, Barriers & Operatory Decontamination 5.3 Dental Unit Waterlines, Biofilm Management & Aseptic Water Protocols 5.4 Infection Prevention Across Care Settings, Laboratory Asepsis & Employee Health Records

6 Chapter 6: Instrument Processing & Sterilization Monitoring

6.1 Instrument Classification, Decontamination & Packaging Protocols 6.2 Heat Sterilization Modalities, Cycle Parameters & Instrument Care 6.3 Physical, Chemical & Biological Sterilization Quality Assurance

7 Chapter 7: Patient Assessment, Vital Signs & Dental Charting

7.1 Health History Assessment, Medical Alerts & Baseline Vital Signs 7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation 7.3 Electronic Dental Records, Legal Standards & Retention Mandates

8 Chapter 8: Dental Radiography & Radiation Protection

8.1 Radiation Physics, Biological Hazards & Safety Code 30 Compliance 8.2 Geometric Principles, Intraoral Projections & Digital Sensor Systems 8.3 Radiographic Anatomy, Labial Mounting & Quality Troubleshooting 8.4 Receptor Care, Patient Preparation, Image Management & Radiographic Anomalies

9 Chapter 9: Chairside Assisting, Ergonomics & Moisture Control

9.1 Four-Handed Dentistry, Operating Zones & Musculoskeletal Ergonomics 9.2 Instrument Grasps, Transfer Mechanics & Sharps Safety 9.3 High-Volume Evacuation, Cotton Roll Isolation & Moisture Control Aids 9.4 Dental Dam: Selection, Punching, Placement Errors & Removal 9.5 Operator Ergonomics, Instrumentation Technique & Musculoskeletal Disorder Prevention

10 Chapter 10: Restorative Materials, Cavity Preparation & Tooth Whitening

10.1 Pulpal Protection, Cavity Liners, Bases & Adhesive Systems 10.2 Dental Amalgam Metallurgy, Composite Resins & Curing Protocols 10.3 Matrix Systems, Retainers, Wedges & Interproximal Contouring 10.4 Cavity Classification & Cavity Preparation Terminology 10.5 Vital and Non-Vital Tooth Whitening

11 Chapter 11: Impression Materials & Laboratory Support

11.1 Impression Material Science, Tray Selection & Clinical Manipulation 11.2 Gypsum Chemistry, Model Pouring & Cast Trimming Principles 11.3 Provisional Restorations, Custom Trays & Laboratory Fabrication 11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries

12 Chapter 12: Fixed & Removable Prosthodontics Assisting

12.1 Crown & Bridge Preparation, Gingival Retraction & Definitive Cementation 12.2 Removable Partial & Complete Dentures, Clinical Stages & Home Care 12.3 Dental Implant Systems, Osseointegration & Clinical Maintenance 12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management

13 Chapter 13: Endodontics & Periodontics Specialty Assisting

13.1 Endodontic Diagnostics, Pathosis & Biomechanical Canal Instrumentation 13.2 Canal Obturation Science, Surgical Endodontics & Tooth Resection 13.3 Periodontal Assessment, Non-Surgical Therapy & Periodontal Surgery 13.4 The Periodontal Disease Process, the 2017 Classification & Plaque and Gingival Indices

14 Chapter 14: Oral Surgery & Suture Care Assisting

14.1 Surgical Asepsis, Elevator Biomechanics & Extraction Armamentarium 14.2 Clinical Exodontia Procedures, Suture Materials & Suture Removal 14.3 Post-Surgical Home Care, Hemostasis & Alveolar Osteitis Management

15 Chapter 15: Orthodontics, Pediatric & Special Needs Patient Care

15.1 Malocclusion Classification, Diagnostic Records & Fixed Appliances 15.2 Pediatric Behavior Guidance, Pulp Therapy & Stainless Steel Crowns 15.3 Appliance Debonding, Retention Protocols & Pediatric Trauma Management 15.4 Special Needs Patient Management: Older Adults, Pregnancy & Medical, Physical or Cognitive Conditions 15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases

16 Chapter 16: Dental Emergencies, Anesthesia & Sedation Support

16.1 Local Anesthesia Armamentarium, Injection Techniques & Complications 16.2 Inhalation Analgesia, Nitrous Oxide Protocols & Conscious Sedation 16.3 Medical Emergency Protocols, Recognition & Life Support Algorithms

17 Chapter 17: Practice Administration, Inventory & Occupational Safety

17.1 Appointment Book Matrix, Clinical Scheduling & Preventive Recall Systems 17.2 Canadian Dental Benefits, Procedure Coding & Financial Management 17.3 WHMIS 2015/GHS, Hazardous Waste & Sharps Exposure Protocols 17.4 Filing and Inventory Systems, Equipment Records, Financial Records, Referrals & Office Policies

18 Chapter 18: Preventive Dentistry, Plaque Biofilm & Oral Hygiene Instruction

18.1 Caries Pathogenesis, Plaque Demineralization & CAMBRA Protocols 18.2 Plaque Disclosing, Toothbrushing Methods & Interdental Cleansing Aids 18.3 Nutritional Foundations, Cariogenicity & Dietary Risk Counselling

19 Chapter 19: Coronal Polishing, Fluoride, Sealants & Desensitizing Agents

19.1 Coronal Polishing Principles, Selective Polishing & Clinical Technique 19.2 Fluoride Chemistry, Remineralization Science & Toxicity Protocols 19.3 Pit & Fissure Sealant Armamentarium, Placement & Clinical Evaluation 19.4 Dentin Hypersensitivity & Desensitizing Agents

12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management

Key Takeaways Explain This Topic AI

CAD/CAM restorations are captured by intraoral scan, designed in software, and then milled from a block or 3D-printed.

Zirconia is sintered in a furnace and shrinks as it densifies, and lithium disilicate may be crystallized in a furnace after milling.

Intraoral scanners cannot record margins covered by blood, saliva or tissue, so retraction and isolation remain essential.

A complete lab prescription lists the dentist, patient, dates, FDI tooth numbers, restoration type, material, shade, design and enclosed items, and carries the dentist's signature.

Items going to and returning from the laboratory are disinfected and labelled, and digital files are sent through secure, encrypted channels.

Last updated: October 2026

12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management

Quick Answer: Competencies 5.11.6 and 5.11.7 cover computer-generated prostheses and restorations and the assistant's role in preparing, packaging, transferring digital information for, delivering and receiving laboratory cases. In CAD/CAM (computer-aided design / computer-aided manufacturing), the preparation is captured with an intraoral scanner (or a scanned impression or model), the restoration is designed in software, and it is milled from a block or 3D-printed . This can happen chairside on the same day or in a laboratory. Every lab case needs a complete written prescription (work authorization). Physical items are disinfected and labelled both outgoing and incoming. Digital files containing personal health information are sent through secure, encrypted channels.

1. The CAD/CAM Workflow

Data capture: an intraoral scanner records the preparation, the adjacent and opposing teeth, and the bite. Retraction, dryness and good isolation matter just as much as for a conventional impression, because scanners cannot "see" through blood, saliva or tissue covering the margin. Alternatively, a conventional impression or stone model is scanned in the laboratory.

Design (CAD): the software proposes a restoration from the scan. The dentist or technician adjusts margins, contacts, occlusion and anatomy.

Manufacture (CAM):

Subtractive milling: the restoration is cut from a prefabricated block or disc of lithium disilicate, zirconia, feldspathic or hybrid ceramic, composite resin or PMMA (for provisionals).

Additive manufacturing (3D printing): models, surgical guides, custom trays, splints, provisionals and some final restorations are built up layer by layer from resin.

Finishing: zirconia is sintered in a furnace (it shrinks as it densifies). Lithium disilicate may be crystallized in a furnace. Restorations are then stained, glazed or polished.

Delivery: try-in and cementation follow the same sequence as any indirect restoration (section 12.1): contacts, margins, internal fit, occlusion, then cementation and cleanup.

Workflow Advantages Limitations

Chairside (single-visit) Restoration placed the same day; no provisional or second appointment; no impression materials High equipment cost; chair time for design and milling; material choices limited to blocks

Laboratory (digital or model-based) Wider range of materials and layered esthetics; technician expertise Provisional and second appointment needed; turnaround time; shipping

Digital file formats: scans are commonly exported as STL (surface geometry) or as formats that also carry colour and texture (for example PLY). Radiographs and CBCT use DICOM . Files must be named so they cannot be confused between patients.

2. Other Digital Prosthodontic Applications

Digital dentures: scans or impressions are used to design and mill or print denture bases and teeth.

Implant planning: CBCT data and intraoral scans are merged to plan the implant position and to print a surgical guide .

Orthodontic models and aligners (section 15.5) are printed from scans.

3. The Laboratory Prescription (Work Authorization)

The dentist signs the prescription. The assistant checks that it is complete before the case leaves the office. It should include:

  • the dentist's name, address, phone and registration number
  • the patient's name or a case identifier
  • the date sent and the date needed
  • the tooth numbers (FDI) and the type of restoration or appliance
  • the material, the shade and the stump (die) shade
  • the margin, pontic and occlusal design
  • any special instructions, such as photographs, a facebow or a custom shade appointment
  • a list of every item enclosed

the dentist's signature.

Keep a copy of the prescription in the patient's record. Labs commonly return the case with an invoice or a certificate listing the materials used. A prescription that is incomplete or unclear delays the case or produces the wrong restoration.

4. Preparing, Packaging and Sending a Case

Disinfect impressions, bite registrations, try-in dentures and appliances (section 11.1 and 5.4). Rinse, disinfect with a compatible intermediate-level disinfectant for the required contact time, rinse again, and bag and label each item "disinfected".

Pour or protect: pour models if the office does this, or protect the impression in a rigid container so that it is not distorted in transit (alginate should be poured, not shipped).

Package each item securely in a labelled case box with the prescription in a separate, clean envelope (not in the same bag as the impressions).

Digital cases: upload scans through the lab's secure portal or encrypted transfer. Include only the personal information needed. Confirm receipt, and note the upload in the patient's chart.

Record and track: log the date sent, the expected return date and the appointment booked for delivery. Schedule the patient's appointment only after confirming the lab's turnaround time.

5. Receiving a Case from the Laboratory

Check the case against the prescription: correct patient, tooth, material and shade, and all enclosed items returned.

Inspect for damage, voids, rough areas and fit on the model. Report problems to the dentist and the lab before the patient arrives.

Disinfect the restoration or appliance before try-in, using a method compatible with the material.

Store the case in a labelled case pan until the appointment, and record its arrival.

After delivery, file the lab slip or certificate in the patient's record, and return any items to the lab if remakes are needed.

6. Complications and Home-Care Instructions for Prosthodontic Cases (5.11.8, 5.11.9)

Problem Likely cause Response

Restoration does not seat Tight contact, residual temporary cement, distorted impression or scan Adjust contacts, clean the preparation, retake the impression or scan if needed

  • Open margin Impression or scan did not capture the finish line Remake
  • Fractured ceramic Thin material, heavy occlusion, bruxism Adjust occlusion; consider a night guard; remake
  • Postoperative sensitivity Exposed dentin, high occlusion, cement leakage Check bite and margins; desensitize
  • Food impaction or open contact Contact too light Add contact or remake

Home-care instructions:

Clean around crowns and under bridge pontics with floss threaders, superfloss or interdental brushes.

Avoid chewing ice or very hard foods.

Wear a night guard if the patient grinds.

Report a loose restoration, a change in bite or sensitivity that does not settle.

Keep regular recall visits so that margins can be checked.