Study guide
15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases
NDAEB Theory Examination Canada
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Foundations
1.1 NDAEB Exam Structure, Logistics & Candidate Regulations 1.2 FDI Two-Digit Tooth Notation & Dental Anatomical Terminology
2 Chapter 2: Professional Ethics, Jurisprudence & Scope of Practice
2.1 CDAA Code of Ethics & Ethical Decision-Making 2.2 Provincial Dental Assisting Regulation & Scope of Practice 2.3 Informed Consent, Documentation & Professional Liability 2.4 Abuse and Neglect Reporting, Conflicts of Interest & Patients with Infectious Diseases
3 Chapter 3: Oral Anatomy, Histology & Tooth Morphology
3.1 Craniofacial Osteology, Muscles of Mastication & Salivary Glands 3.2 Odontogenesis, Dental Hard Tissues & the Periodontium 3.3 Tooth Morphology, Dentition Comparison & Eruption Chronology 3.4 Oral and Facial Landmarks, Facial and Tongue Muscles, Paranasal Sinuses & Cervical Lymph Nodes
4 Chapter 4: Oral Microbiology, Pathology & Pharmacology Basics
4.1 Oral Microbiology, Biofilm Ecology & Caries Pathogenesis 4.2 Diagnostic Terminology, Mucosal Lesions & Oral Pathology 4.3 Dental Pharmacology, Local Anesthetics & Medical Drug Considerations 4.4 Prescriptions, Abbreviations, Over-the-Counter & Recreational Drugs
5 Chapter 5: Infection Prevention and Control (IPAC) & Asepsis
5.1 The Chain of Infection, Routine Practices & Personal Protective Equipment 5.2 Environmental Surface Asepsis, Barriers & Operatory Decontamination 5.3 Dental Unit Waterlines, Biofilm Management & Aseptic Water Protocols 5.4 Infection Prevention Across Care Settings, Laboratory Asepsis & Employee Health Records
6 Chapter 6: Instrument Processing & Sterilization Monitoring
6.1 Instrument Classification, Decontamination & Packaging Protocols 6.2 Heat Sterilization Modalities, Cycle Parameters & Instrument Care 6.3 Physical, Chemical & Biological Sterilization Quality Assurance
7 Chapter 7: Patient Assessment, Vital Signs & Dental Charting
7.1 Health History Assessment, Medical Alerts & Baseline Vital Signs 7.2 Dental Examination Charting, FDI Notation & Periodontal Documentation 7.3 Electronic Dental Records, Legal Standards & Retention Mandates
8 Chapter 8: Dental Radiography & Radiation Protection
8.1 Radiation Physics, Biological Hazards & Safety Code 30 Compliance 8.2 Geometric Principles, Intraoral Projections & Digital Sensor Systems 8.3 Radiographic Anatomy, Labial Mounting & Quality Troubleshooting 8.4 Receptor Care, Patient Preparation, Image Management & Radiographic Anomalies
9 Chapter 9: Chairside Assisting, Ergonomics & Moisture Control
9.1 Four-Handed Dentistry, Operating Zones & Musculoskeletal Ergonomics 9.2 Instrument Grasps, Transfer Mechanics & Sharps Safety 9.3 High-Volume Evacuation, Cotton Roll Isolation & Moisture Control Aids 9.4 Dental Dam: Selection, Punching, Placement Errors & Removal 9.5 Operator Ergonomics, Instrumentation Technique & Musculoskeletal Disorder Prevention
10 Chapter 10: Restorative Materials, Cavity Preparation & Tooth Whitening
10.1 Pulpal Protection, Cavity Liners, Bases & Adhesive Systems 10.2 Dental Amalgam Metallurgy, Composite Resins & Curing Protocols 10.3 Matrix Systems, Retainers, Wedges & Interproximal Contouring 10.4 Cavity Classification & Cavity Preparation Terminology 10.5 Vital and Non-Vital Tooth Whitening
11 Chapter 11: Impression Materials & Laboratory Support
11.1 Impression Material Science, Tray Selection & Clinical Manipulation 11.2 Gypsum Chemistry, Model Pouring & Cast Trimming Principles 11.3 Provisional Restorations, Custom Trays & Laboratory Fabrication 11.4 Intracoronal Temporary Restorations: IRM, Cavit, Glass Ionomer & Resin Temporaries
12 Chapter 12: Fixed & Removable Prosthodontics Assisting
12.1 Crown & Bridge Preparation, Gingival Retraction & Definitive Cementation 12.2 Removable Partial & Complete Dentures, Clinical Stages & Home Care 12.3 Dental Implant Systems, Osseointegration & Clinical Maintenance 12.4 CAD/CAM Restorations, Digital Workflows & Laboratory Case Management
13 Chapter 13: Endodontics & Periodontics Specialty Assisting
13.1 Endodontic Diagnostics, Pathosis & Biomechanical Canal Instrumentation 13.2 Canal Obturation Science, Surgical Endodontics & Tooth Resection 13.3 Periodontal Assessment, Non-Surgical Therapy & Periodontal Surgery 13.4 The Periodontal Disease Process, the 2017 Classification & Plaque and Gingival Indices
14 Chapter 14: Oral Surgery & Suture Care Assisting
14.1 Surgical Asepsis, Elevator Biomechanics & Extraction Armamentarium 14.2 Clinical Exodontia Procedures, Suture Materials & Suture Removal 14.3 Post-Surgical Home Care, Hemostasis & Alveolar Osteitis Management
15 Chapter 15: Orthodontics, Pediatric & Special Needs Patient Care
15.1 Malocclusion Classification, Diagnostic Records & Fixed Appliances 15.2 Pediatric Behavior Guidance, Pulp Therapy & Stainless Steel Crowns 15.3 Appliance Debonding, Retention Protocols & Pediatric Trauma Management 15.4 Special Needs Patient Management: Older Adults, Pregnancy & Medical, Physical or Cognitive Conditions 15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases
16 Chapter 16: Dental Emergencies, Anesthesia & Sedation Support
16.1 Local Anesthesia Armamentarium, Injection Techniques & Complications 16.2 Inhalation Analgesia, Nitrous Oxide Protocols & Conscious Sedation 16.3 Medical Emergency Protocols, Recognition & Life Support Algorithms
17 Chapter 17: Practice Administration, Inventory & Occupational Safety
17.1 Appointment Book Matrix, Clinical Scheduling & Preventive Recall Systems 17.2 Canadian Dental Benefits, Procedure Coding & Financial Management 17.3 WHMIS 2015/GHS, Hazardous Waste & Sharps Exposure Protocols 17.4 Filing and Inventory Systems, Equipment Records, Financial Records, Referrals & Office Policies
18 Chapter 18: Preventive Dentistry, Plaque Biofilm & Oral Hygiene Instruction
18.1 Caries Pathogenesis, Plaque Demineralization & CAMBRA Protocols 18.2 Plaque Disclosing, Toothbrushing Methods & Interdental Cleansing Aids 18.3 Nutritional Foundations, Cariogenicity & Dietary Risk Counselling
19 Chapter 19: Coronal Polishing, Fluoride, Sealants & Desensitizing Agents
19.1 Coronal Polishing Principles, Selective Polishing & Clinical Technique 19.2 Fluoride Chemistry, Remineralization Science & Toxicity Protocols 19.3 Pit & Fissure Sealant Armamentarium, Placement & Clinical Evaluation 19.4 Dentin Hypersensitivity & Desensitizing Agents
15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases
Key Takeaways Explain This Topic AI
Orthodontic records include health histories, extraoral and intraoral photographs, study models or scans with a bite registration, and panoramic and lateral cephalometric radiographs.
A lateral cephalometric radiograph is taken with the head held in a cephalostat and is traced to measure skeletal and dental relationships.
Fixed appliances give precise three-dimensional tooth control without depending on wear, while removable appliances rely on patient compliance.
Clear aligners are worn about 20 to 22 hours a day and are removed only to eat, to drink anything other than plain water, and to clean.
Aligner attachments are tooth-coloured composite shapes bonded with a template, and interproximal reduction removes small measured amounts of enamel to create space.
Last updated: October 2026
15.5 Orthodontic Records, Removable Appliances, Clear Aligners & Orthodontic Laboratory Cases
Quick Answer: Before orthodontic treatment, the team collects diagnostic records :
- health and dental histories and a clinical examination
- extraoral and intraoral photographs
- study models or digital scans with a bite registration
a panoramic radiograph and usually a lateral cephalometric radiograph.
These records support the case presentation and informed consent (5.12.7). Fixed appliances are bonded or cemented and are not removed by the patient. Removable appliances depend on the patient wearing them (5.12.4). Clear aligners (5.12.8) are a series of thermoplastic trays, each moving the teeth a small amount. They are worn about 20 to 22 hours a day and changed on the schedule the orthodontist sets. They often use bonded attachments and sometimes interproximal reduction (IPR) . The assistant prepares the laboratory prescription , disinfects and packages items, transfers digital files securely and checks returned appliances (5.12.9, 5.12.10).
1. Indications and Contraindications for Orthodontic Treatment (5.12.5)
Indications:
- crowding or spacing that affects esthetics or makes cleaning difficult
- crossbites, especially those causing a functional shift of the mandible
- a large overjet that puts the incisors at risk of trauma
- a deep bite that injures the palate or gingiva
- impacted or ectopic teeth (for example, canines) that need to be guided into place
- Class II or Class III skeletal patterns that can be improved during growth
positioning teeth before restorative, prosthetic or implant treatment.
Contraindications or reasons to delay treatment:
- poor oral hygiene and uncontrolled caries
- active, untreated periodontal disease or inadequate bone support
- poor motivation or an inability to cooperate with appointments and home care
certain medical conditions or medications that need medical consultation first (for example, uncontrolled diabetes, or some bone-modifying drugs)
unrealistic expectations.
2. Records for Case Presentation and Informed Consent (5.12.7)
Record Purpose and assistant's role
Medical and dental history Identify conditions, medications and allergies (for example, nickel or latex) that affect treatment.
Clinical examination The orthodontist records the molar and canine classification (section 15.1), overjet, overbite, midlines, crowding, habits and TMJ findings.
Extraoral photographs Typically frontal at rest, frontal smiling and profile views. Use a plain background, the Frankfort plane parallel to the floor and no glasses.
Intraoral photographs Typically frontal, right and left buccal (in occlusion), and maxillary and mandibular occlusal views. Use retractors and occlusal mirrors (warmed to prevent fogging). Remove saliva and debris.
Study models or digital scans Alginate impressions poured in orthodontic stone and trimmed with art portions (section 11.2), or an intraoral scan. Include a bite registration in centric occlusion.
Panoramic radiograph Shows all teeth, developing and missing teeth, root lengths and pathology.
Lateral cephalometric radiograph A standardized side view of the skull taken with ear rods (a cephalostat). It is traced to measure skeletal and dental relationships and growth.
Other images Bitewings, periapicals or CBCT when the orthodontist prescribes them.
Case presentation and consent: the orthodontist explains the diagnosis, the treatment options (including no treatment), the expected duration and cost, and the risks. Common risks are:
- demineralization (white spot lesions) and caries if hygiene is poor
- gingival inflammation
- root resorption
- relapse without retention
- discomfort and TMJ symptoms
the need for patient cooperation.
The patient (or parent or guardian) signs the consent form, which is filed in the record (section 2.3).
3. Fixed versus Removable Appliances (5.12.4)
Fixed appliances Removable appliances
Examples Brackets and bands with archwires; fixed rapid palatal expander; fixed functional appliances (for example, Herbst); lingual holding arch; bonded lingual retainer Hawley retainer; vacuum-formed retainer; removable expansion plate with a screw; removable functional appliances (for example, Twin Block); headgear and reverse-pull facemask; clear aligners
Control of tooth movement Precise movement in three dimensions (tipping, bodily movement, rotation, torque) Mainly tipping with traditional plates; aligners can do more with attachments
Patient cooperation Not needed for wear; hygiene still essential Results depend on the patient wearing the appliance as prescribed
Hygiene More difficult; plaque traps around brackets Teeth can be brushed normally with the appliance out
Parts of a removable appliance: an acrylic baseplate ; retentive clasps (for example, Adams clasps on first molars, ball clasps); an active component such as a finger spring or an expansion screw; and often a labial bow . An expansion screw is turned with a key as the orthodontist directs (for example, one quarter turn at set intervals).
4. Clear Aligner Treatment (5.12.8)
Records and scan: photographs, radiographs and a full-arch digital scan (or impressions) with a bite record.
Digital treatment plan: the manufacturer's software creates a virtual set-up showing tooth movements stage by stage, and the planned attachments and IPR . The orthodontist or dentist reviews, modifies and approves the plan.
Manufacture: models for each stage are 3D-printed and the aligners are thermoformed and trimmed.
Delivery appointment:
Polish or clean the teeth.
Attachments: tooth-coloured composite shapes that give the aligner something to push against. The enamel is etched, rinsed and dried, and the bonding agent applied. A template tray filled with composite is seated and light-cured. The template is removed and excess composite (flash) is cleaned off.
IPR (enamel reduction): the dentist removes a small, measured amount of enamel between selected teeth with strips or discs to create space. The amount is checked with a gauge.
Try in the first aligners and check the fit.
Instructions to the patient:
Wear the aligners about 20 to 22 hours a day . Remove them only to eat, to drink anything other than plain water, and to clean.
Insert by pressing with the fingertips (seating aids called "chewies" may be used). Remove by releasing from the back teeth first.
Brush and floss before reinserting the aligners, so food and sugar are not trapped against the teeth.
Clean aligners with a soft brush and cool water; hot water can warp them. Store them in their case, never wrapped in a napkin.
Change to the next aligner on the schedule the orthodontist sets (commonly every 1 to 2 weeks). Keep the previous set.
Follow-up visits: check that the aligners are "tracking" (fitting fully), replace lost attachments, and order refinement aligners if needed.
Retention after treatment (section 15.3).
Common problems:
Lost or broken aligner: call the office. The patient is usually told to wear the previous or next aligner as directed.
Aligner not seating: check attachments and patient wear.
Soreness for the first days of each new aligner is normal.
5. Communicating with the Laboratory or Appliance Manufacturer (5.12.9, 5.12.10)
Prescription: the orthodontist signs a written or electronic prescription. It includes:
- patient and practice identifiers
- the type and design of the appliance
- clasps, springs, screws, wires and acrylic colour
- the teeth involved
- special instructions
the date the appliance is needed.
Outgoing cases:
Disinfect impressions, models, bite registrations and appliances (section 11.1).
Package each item so it cannot be damaged, label it with the patient's name, and enclose the prescription.
Upload digital scans through the lab's or manufacturer's secure portal .
Record the date sent and the expected return date in a case-tracking log.
Incoming cases:
Check the appliance against the prescription and the patient's name.
Disinfect it before it goes into the patient's mouth.
Confirm it is ready before the appointment and file the lab slip in the record.
Contact the lab promptly about errors or damage.
6. Complications and Home Care (5.12.11, 5.12.12)
White spot lesions and caries: reinforce brushing around brackets, fluoride toothpaste and rinses, and fewer sugary snacks and drinks.
Gingival enlargement: improve plaque control; use interdental brushes and floss threaders.
Ulcers and poking wires: use orthodontic wax, and see section 15.3 for managing emergencies.
Allergy: nickel allergy may require nickel-free wires and brackets; latex allergy requires non-latex elastics and gloves.
Removable appliance care:
Brush the appliance daily with a soft brush and cool water (mild soap or a retainer cleaner may be used).
Avoid hot water and keep it away from pets.
Always store it in its case.