Study guide

6.3 Occlusion Principles & Angle Classification

NDEB Assessment of Fundamental Knowledge AFK

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About the AFK & NDEB Equivalency Process 1.2 Format, Scoring, Attempts & Exam-Day Rules 1.3 Official Blueprint Weights & Study Strategy

2 Chapter 1: Head & Neck Anatomy

1.1 Osteology, Fascial Spaces & Odontogenic Spread 1.2 Cranial Nerves Relevant to Dentistry 1.3 Vascular Supply, Lymphatics, TMJ & Mastication

3 Chapter 2: Human Physiology for Dentistry

2.1 Cardiovascular & Respiratory Physiology 2.2 Renal, Endocrine & Acid-Base Physiology 2.3 Neuromuscular Physiology & Salivary Function

4 Chapter 3: Biochemistry, Nutrition & Biomaterials

3.1 Metabolism, Enzymes & Oral Biochemistry 3.2 Vitamins, Minerals & Nutritional Deficiencies 3.3 Biomaterials Science: Properties & Biocompatibility

5 Chapter 4: Oral Histology, Embryology & Growth

4.1 Tooth Development & Oral Embryology 4.2 Enamel, Dentin, Cementum, Pulp & Periodontium Histology 4.3 Craniofacial Growth & Development

6 Chapter 5: Microbiology, Immunology & Cariology

5.1 Oral Microbiome, Pathogens & Biofilms 5.2 Immunology & Hypersensitivity in the Oral Cavity 5.3 Cariology: Etiology, Progression & Prevention Science

7 Chapter 6: Dental Anatomy & Occlusion

6.1 Permanent & Primary Tooth Morphology & Roots 6.2 Eruption Sequences & FDI Numbering 6.3 Occlusion Principles & Angle Classification

8 Chapter 7: Restorative Principles & Direct Materials

7.1 Caries Diagnosis & Operative Principles 7.2 Amalgam, Composite Resin & Glass Ionomer 7.3 Adhesion, Bonding & Pulp Protection

9 Chapter 8: Indirect Restorations & Prosthodontics

8.1 Crowns, Bridges, Onlays & Preparation Design 8.2 Complete Dentures & Removable Partial Dentures 8.3 Occlusion Concepts in Prosthodontics

10 Chapter 9: Implants & Advanced Restorative

9.1 Implant Biology & Osseointegration 9.2 Implant Planning, Prosthetics & Complications 9.3 Clinical Dental Materials Selection & Failures

11 Chapter 10: Oral Medicine — Mucosal Disease

10.1 White, Red & Ulcerative Mucosal Lesions 10.2 Oral Cancer & Premalignant Conditions 10.3 Vesiculobullous & Immune-Mediated Mucosal Disease

12 Chapter 11: Oral Pathology — Hard Tissues

11.1 Cysts of the Jaws 11.2 Odontogenic Tumors 11.3 Bone Pathology & Fibro-Osseous Lesions

13 Chapter 12: Salivary Disease, Systemic Manifestations & Oral Radiology

12.1 Salivary Gland Disease 12.2 Systemic Disease Oral Manifestations 12.3 Radiation Physics & Radiographic Technique 12.4 Radiographic Anatomy, Lesions & Interpretation

14 Chapter 13: Local Anesthesia & Analgesia

13.1 Local Anesthetics & Vasoconstrictors 13.2 Injection Techniques, Failures & Complications 13.3 Analgesics, Anxiolysis & Sedation

15 Chapter 14: Systemic Pharmacology & Medical Emergencies

14.1 Antibiotics & Antimicrobials in Dentistry 14.2 Drug Interactions & the Medically Compromised Patient 14.3 Recognition of Medical Emergencies in the Dental Office 14.4 Emergency Drugs & Management Protocols

16 Chapter 15: Periodontics Foundations

15.1 Periodontal Anatomy & Pathogenesis 15.2 2017 AAP Classification of Periodontal Diseases 15.3 Periodontal Examination & Diagnosis

17 Chapter 16: Periodontal Therapy & Systemic Links

16.1 Nonsurgical Periodontal Therapy 16.2 Surgical Periodontics Basics 16.3 Periodontal–Systemic Relationships

18 Chapter 17: Endodontics

17.1 Pulp Biology & Endodontic Diagnosis 17.2 Canal Morphology & Access Preparation 17.3 Instrumentation, Irrigation & Obturation 17.4 Endodontic Emergencies, Trauma & Retreatment

19 Chapter 18: Oral Surgery, Trauma & Orofacial Pain

18.1 Exodontia Principles & Complications 18.2 Impacted Teeth & Minor Oral Surgery 18.3 Maxillofacial Trauma 18.4 Orofacial Pain, TMD & Dental Emergencies

20 Chapter 19: Orthodontics

19.1 Growth, Development & Orthodontic Diagnosis 19.2 Malocclusion Classification & Treatment Planning 19.3 Appliances, Interceptive & Comprehensive Orthodontics

21 Chapter 20: Pediatric Dentistry

20.1 Behavior Management & Primary Dentition Care 20.2 Pediatric Pulp Therapy 20.3 Pediatric Trauma & Space Management

22 Chapter 21: Geriatric & Special Needs Dentistry

21.1 Geriatric Dentistry Considerations 21.2 Special Needs Patients in Dental Practice

23 Chapter 22: Prevention & Evidence-Based Dentistry

22.1 Fluoride, Sealants & Prevention Strategies 22.2 Epidemiology, Caries Indices & Public Health 22.3 Evidence-Based Dentistry & Biostatistics

24 Chapter 23: Infection Control, Ethics & Jurisprudence

23.1 Infection Control & Sterilization 23.2 Ethics & Professionalism for Canadian Practice 23.3 Jurisprudence, Consent & Clinical Records

25 Chapter 24: Integrated Review & Exam Strategy

24.1 High-Yield Differentials Across Domains 24.2 Case Vignette Reasoning Patterns 24.3 Exam-Day Strategy & Pathway Next Steps (ACJ/NDECC)

6.3 Occlusion Principles & Angle Classification

Key Takeaways Explain This Topic AI

Angle Class I: mesiobuccal cusp of the maxillary first molar aligns with the buccal groove of the mandibular first molar; Class II is distal mandibular relation; Class III is mesial mandibular relation

Overjet is horizontal overlap of incisors; overbite is vertical overlap; reverse overjet and anterior/posterior crossbite describe transverse or sagittal discrepancies

Centric relation (CR) is a bone-to-bone condylar position independent of teeth; centric occlusion (CO)/maximum intercuspation (MIP) is tooth-determined; CR–CO discrepancy is clinically important

Curve of Spee is the anteroposterior occlusal curve (concave upward in mandible); Curve of Wilson is the mediolateral curve across left and right posterior teeth

Canine guidance and mutually protected occlusion vs group function are common lateral guidance schemes tested conceptually on the AFK

Last updated: July 2026

Quick Answer: Angle Class I = MB cusp of 16/26 in buccal groove of 46/36 ; Class II = mandible distal (molar); Class III = mandible mesial. Overjet = horizontal; overbite = vertical. CR is condylar; CO/MIP is dental. Know Curves of Spee and Wilson .

Occlusion links dental anatomy to orthodontics, prosthodontics, and TMD screening. AFK expects definitions and classification more than full articulator programming, but concepts of CR, MIP, and guidance appear across domains.

Ideal Occlusion — Working Framework

No single “perfect” occlusion exists in every patient, but teaching norms include:

Static intercuspation with stable posterior contacts and lighter anterior contacts in MIP.

Anterior guidance in protrusion that discludes posteriors.

In lateral excursion, either canine guidance (canines disclude posteriors) or group function (shared working-side posterior contacts without nonworking interferences).

Absence of nonworking (balancing) interferences that can load the joint or fracture restorations.

Midlines roughly coincident; arches coordinated in transverse width.

Mutually protected occlusion concept: posteriors protect anteriors in MIP (vertical stops); anteriors protect posteriors in excursions (disclusion). This is a design ideal for many fixed reconstructions—not a claim that all natural dentitions show pure canine guidance.

Angle Classification (Sagittal Molar Relation)

Edward Angle’s system classifies malocclusion by first permanent molar relationship (canine relation is a parallel descriptor).

Class Molar relationship (FDI 16 to 46 / 26 to 36) Mandible relative to maxilla Clinical notes

Class I (neutrocclusion) MB cusp of maxillary first molar aligns with buccal groove of mandibular first molar Neutral sagittal molar May still have crowding, open bite, crossbite

Class II (distocclusion) Mandibular molar is distal ; MB cusp of 16 sits mesial to the buccal groove of 46 (often aligns with embrasure between 45–46 or on 45) Retrognathic molar relation Division 1: large overjet, proclined upper incisors; Division 2: retroclined upper centrals, deep bite often

Class III (mesiocclusion) Mandibular molar is mesial ; MB cusp of 16 sits distal to buccal groove of 36/46 Prognathic molar relation May show reverse overjet; true skeletal vs dental Class III differs

Half-cusp and subdivision language: Class II subdivision means Class II on one side and Class I on the other. AFK may describe relations in words without naming “Angle” if the molar landmark is clear.

Canine classification (often paired):

Class I canine: maxillary canine cusp tip between mandibular canine and first premolar (distal to 33/43).

Class II canine: maxillary canine mesial to that embrasure (sits over mandibular canine more).

Class III canine: maxillary canine distal, toward the mandibular premolar embrasure more.

Important: Angle Class I molar does not equal “ideal occlusion.” Crowding, open bite, crossbite, and CR–MIP slides can all exist in Class I.

Overjet, Overbite, Open Bite, Crossbite

Term Definition Typical values / notes

Overjet Horizontal (labiolingual) distance between maxillary and mandibular incisors Normal ~2–3 mm; increased in Class II div 1; negative = reverse overjet

Overbite Vertical overlap of maxillary over mandibular incisors Normal ~2–4 mm or ~10–50% crown coverage depending on text; deep bite = excessive; open bite = negative vertical overlap

Anterior open bite No vertical overlap/incisal contact of anteriors in MIP Habits, skeletal pattern, airway-related growth

Anterior crossbite One or more maxillary anteriors occlude lingual to mandibular anteriors Dental or skeletal Class III patterns

Posterior crossbite Buccal cusps of maxillary posteriors occlude lingual to mandibular buccal cusps (common single-tooth or segmental) Transverse discrepancy; may be unilateral with functional shift

Scissor (buccal) bite Maxillary posterior teeth completely buccal to mandibular without normal overlap Less common transverse problem

Edge-to-edge Incisors meet at incisal edges Zero overjet/overbite borderline

Functional shift: a premature contact (often a primary canine or molar interference) forces the mandible to slide into a crossbite appearance—treatment may be occlusal, not only orthopedic. AFK may contrast true skeletal asymmetry with a shift.

Centric Relation vs Centric Occlusion / MIP

Concept Definition Determined by

Centric relation (CR) Maxillomandibular relationship in which the condyles are in their most superior anterior position in the fossae, braced against the articular eminences with the discs interposed (modern teaching varies slightly in wording) Joints / ligaments / muscles—not teeth

Centric occlusion (CO) Occlusion of opposing teeth when mandible is in CR Teeth when mandible is in CR

Maximum intercuspation (MIP) / intercuspal position (ICP) Complete intercuspation of opposing teeth independent of condylar position Teeth

In many dentate patients, MIP ≠ CR . A CR–MIP discrepancy (slide from first CR contact into MIP) is common. Large slides, especially with lateral components, matter for diagnosis of occlusal disease, prosthetic design, and TMD evaluation. Recording CR (e.g., bimanual manipulation, leaf gauge concepts at a high level) is more prosthodontic detail; AFK cares that CR is condylar and MIP is dental .

Retruded contact position (RCP) is often used synonymously with first tooth contact in CR in older literature—recognize the vocabulary cluster: CR / RCP vs ICP / MIP / CO.

Curves of Spee and Wilson; Compensating Curve

Curve of Spee (anteroposterior): From the cusp tip of the mandibular canine along buccal cusps of premolars and molars, the occlusal line forms a curve that is concave superiorly in the mandible (convex for the maxillary arch alignment). A deep Curve of Spee is associated with deep bite tendencies and may be leveled in orthodontics. Prosthodontic setups use a controlled curve for balanced or lingualized schemes.

Curve of Wilson (mediolateral): The mediolateral curvature of the occlusal plane across left and right posterior teeth. Mandibular posterior crowns incline lingually somewhat; maxillary posteriors have a compensating buccal inclination so lingual cusps can function. On frontal view, the mandibular curve is concave superiorly.

Compensating curve (complete dentures): Artificial curve incorporating Spee/Wilson concepts so that balanced occlusion can be developed on an articulator—high-yield when prosthodontics overlaps this chapter.

Bonwill triangle and Monson sphere are historical geometric models of mandibular arch form and spherical occlusal surfaces—occasionally mentioned; know they relate to idealized 4-inch sphere concepts rather than clinical measurement tools.

Guidance and Excursive Movements

Protrusive movement: mandible moves forward; ideally incisal guidance (central/lateral incisors) separates posteriors.

Laterotrusive (working) side: side toward which mandible moves; contacts may be canine only or group function.

Mediotrusive (nonworking/balancing) side: opposite side; contacts here in natural dentition are often considered interferences for fixed restorative goals (though complete dentures may use balancing contacts for stability).

Bennett movement: immediate/progressive mandibular side-shift of the working condyle—advanced articulator concept; recognition-level for AFK.

Clinical Integration

Restoring a single crown: match existing MIP contacts; avoid introducing nonworking interferences.

Raising vertical dimension: prosthodontic decision involving CR records and phonetics/esthetics—beyond pure classification but linked to CR vs MIP.

Pediatric anterior crossbite or posterior crossbite: early interceptive thinking; distinguish dental crossbite of one tooth from skeletal transverse deficiency.

Class II division 2: retroclined maxillary centrals with deep overbite—different from division 1 proclination/large overjet.

AFK Exam Traps

Overjet ≠ overbite —horizontal vs vertical; reverse them and you lose easy points.

Class II means the mandible is distal (or maxilla relatively mesial)—describe the mandibular molar’s position relative to the maxillary molar.

Class I molars can still be malocclusion (crowding, open bite).

CR is not MIP —CR is joint-based; MIP is maximum tooth fit.

Curve of Spee is sagittal (front-to-back); Curve of Wilson is frontal/mediolateral—do not swap names.

If you can assign Angle class from a molar description, define overjet/overbite/crossbite, and separate CR from MIP, you will clear the majority of AFK occlusion stems in this chapter.