Study guide

7.2 Amalgam, Composite Resin & Glass Ionomer

NDEB Assessment of Fundamental Knowledge AFK

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About the AFK & NDEB Equivalency Process 1.2 Format, Scoring, Attempts & Exam-Day Rules 1.3 Official Blueprint Weights & Study Strategy

2 Chapter 1: Head & Neck Anatomy

1.1 Osteology, Fascial Spaces & Odontogenic Spread 1.2 Cranial Nerves Relevant to Dentistry 1.3 Vascular Supply, Lymphatics, TMJ & Mastication

3 Chapter 2: Human Physiology for Dentistry

2.1 Cardiovascular & Respiratory Physiology 2.2 Renal, Endocrine & Acid-Base Physiology 2.3 Neuromuscular Physiology & Salivary Function

4 Chapter 3: Biochemistry, Nutrition & Biomaterials

3.1 Metabolism, Enzymes & Oral Biochemistry 3.2 Vitamins, Minerals & Nutritional Deficiencies 3.3 Biomaterials Science: Properties & Biocompatibility

5 Chapter 4: Oral Histology, Embryology & Growth

4.1 Tooth Development & Oral Embryology 4.2 Enamel, Dentin, Cementum, Pulp & Periodontium Histology 4.3 Craniofacial Growth & Development

6 Chapter 5: Microbiology, Immunology & Cariology

5.1 Oral Microbiome, Pathogens & Biofilms 5.2 Immunology & Hypersensitivity in the Oral Cavity 5.3 Cariology: Etiology, Progression & Prevention Science

7 Chapter 6: Dental Anatomy & Occlusion

6.1 Permanent & Primary Tooth Morphology & Roots 6.2 Eruption Sequences & FDI Numbering 6.3 Occlusion Principles & Angle Classification

8 Chapter 7: Restorative Principles & Direct Materials

7.1 Caries Diagnosis & Operative Principles 7.2 Amalgam, Composite Resin & Glass Ionomer 7.3 Adhesion, Bonding & Pulp Protection

9 Chapter 8: Indirect Restorations & Prosthodontics

8.1 Crowns, Bridges, Onlays & Preparation Design 8.2 Complete Dentures & Removable Partial Dentures 8.3 Occlusion Concepts in Prosthodontics

10 Chapter 9: Implants & Advanced Restorative

9.1 Implant Biology & Osseointegration 9.2 Implant Planning, Prosthetics & Complications 9.3 Clinical Dental Materials Selection & Failures

11 Chapter 10: Oral Medicine — Mucosal Disease

10.1 White, Red & Ulcerative Mucosal Lesions 10.2 Oral Cancer & Premalignant Conditions 10.3 Vesiculobullous & Immune-Mediated Mucosal Disease

12 Chapter 11: Oral Pathology — Hard Tissues

11.1 Cysts of the Jaws 11.2 Odontogenic Tumors 11.3 Bone Pathology & Fibro-Osseous Lesions

13 Chapter 12: Salivary Disease, Systemic Manifestations & Oral Radiology

12.1 Salivary Gland Disease 12.2 Systemic Disease Oral Manifestations 12.3 Radiation Physics & Radiographic Technique 12.4 Radiographic Anatomy, Lesions & Interpretation

14 Chapter 13: Local Anesthesia & Analgesia

13.1 Local Anesthetics & Vasoconstrictors 13.2 Injection Techniques, Failures & Complications 13.3 Analgesics, Anxiolysis & Sedation

15 Chapter 14: Systemic Pharmacology & Medical Emergencies

14.1 Antibiotics & Antimicrobials in Dentistry 14.2 Drug Interactions & the Medically Compromised Patient 14.3 Recognition of Medical Emergencies in the Dental Office 14.4 Emergency Drugs & Management Protocols

16 Chapter 15: Periodontics Foundations

15.1 Periodontal Anatomy & Pathogenesis 15.2 2017 AAP Classification of Periodontal Diseases 15.3 Periodontal Examination & Diagnosis

17 Chapter 16: Periodontal Therapy & Systemic Links

16.1 Nonsurgical Periodontal Therapy 16.2 Surgical Periodontics Basics 16.3 Periodontal–Systemic Relationships

18 Chapter 17: Endodontics

17.1 Pulp Biology & Endodontic Diagnosis 17.2 Canal Morphology & Access Preparation 17.3 Instrumentation, Irrigation & Obturation 17.4 Endodontic Emergencies, Trauma & Retreatment

19 Chapter 18: Oral Surgery, Trauma & Orofacial Pain

18.1 Exodontia Principles & Complications 18.2 Impacted Teeth & Minor Oral Surgery 18.3 Maxillofacial Trauma 18.4 Orofacial Pain, TMD & Dental Emergencies

20 Chapter 19: Orthodontics

19.1 Growth, Development & Orthodontic Diagnosis 19.2 Malocclusion Classification & Treatment Planning 19.3 Appliances, Interceptive & Comprehensive Orthodontics

21 Chapter 20: Pediatric Dentistry

20.1 Behavior Management & Primary Dentition Care 20.2 Pediatric Pulp Therapy 20.3 Pediatric Trauma & Space Management

22 Chapter 21: Geriatric & Special Needs Dentistry

21.1 Geriatric Dentistry Considerations 21.2 Special Needs Patients in Dental Practice

23 Chapter 22: Prevention & Evidence-Based Dentistry

22.1 Fluoride, Sealants & Prevention Strategies 22.2 Epidemiology, Caries Indices & Public Health 22.3 Evidence-Based Dentistry & Biostatistics

24 Chapter 23: Infection Control, Ethics & Jurisprudence

23.1 Infection Control & Sterilization 23.2 Ethics & Professionalism for Canadian Practice 23.3 Jurisprudence, Consent & Clinical Records

25 Chapter 24: Integrated Review & Exam Strategy

24.1 High-Yield Differentials Across Domains 24.2 Case Vignette Reasoning Patterns 24.3 Exam-Day Strategy & Pathway Next Steps (ACJ/NDECC)

7.2 Amalgam, Composite Resin & Glass Ionomer

Key Takeaways Explain This Topic AI

Dental amalgam is mercury mixed with silver-tin-copper alloy; high-copper alloys minimize the weak, corrosive γ₂ (Sn–Hg) phase and reduce creep-related marginal failure.

Composite resin is a filled methacrylate polymer; filler loading, degree of conversion, polymerization shrinkage, and cavity C-factor control stress, seal, and clinical success.

Glass ionomer sets by acid–base reaction, bonds chemically to tooth mineral, and releases (and can recharge) fluoride—ideal for root caries, high-risk, and sandwich applications.

Amalgam needs macromechanical retention and tolerates moisture better than bonding steps; composite needs isolation and adhesive technique; GIC trades strength for adhesion and fluoride.

Material selection balances aesthetics, occlusal load, isolation quality, caries risk, and remaining tooth structure—not a single universal restorative for every cavity.

Last updated: July 2026

7.2 Amalgam, Composite Resin & Glass Ionomer

Quick Answer: Dental amalgam is a metallic restorative from silver-tin (and copper) alloy mixed with mercury; modern high-copper alloys minimize corrosive γ₂ (Sn–Hg) . Composite resin is a filled polymer relying on adhesion , with properties dominated by filler , polymerization shrinkage , and C-factor . Glass ionomer cement (GIC) chemically bonds to tooth and releases fluoride , excelling in low-stress, high-caries-risk, and moisture-challenged sites. Choose materials by load, isolation, aesthetics, and caries risk—not brand slogans.

This section is the core direct-restorative materials triad for AFK. Biomaterials science (modulus, creep, corrosion, polymerization) was introduced earlier; here you apply those properties to clinical selection and failure modes .

  • Dental Amalgam
  • Composition and mixing

Amalgam = liquid mercury + alloy powder (triturated → plastic mass → sets in the cavity).

  • Alloy component Typical role
  • Silver (Ag) Strength, corrosion resistance, sets expansion tendency
  • Tin (Sn) Improves amalgamation; reduces expansion; involved in γ₂ in low-copper alloys
  • Copper (Cu) Strength; in high-copper alloys suppresses γ₂

Zinc (Zn) (if present) Scavenger in manufacturing; moisture contamination of zinc-containing amalgam can cause delayed expansion

Mercury (Hg) Reacts with alloy particles to form matrix phases

Trituration mixes alloy and mercury. Under/over-trituration alters plasticity, working time, and strength. Condensation adapts material to walls and reduces excess mercury-rich matrix; carving establishes anatomy before full set; polishing (when indicated) is delayed until set is adequate.

Metallurgical phases (high yield)

Classic low-copper amalgam reaction (simplified teaching):

Alloy particle (mainly γ = Ag₃Sn ) + Hg → γ₁ (Ag₂Hg₃) matrix + γ₂ (Sn₇–₈Hg) + unreacted γ particles

  • Phase Identity Clinical meaning
  • γ (gamma) Ag–Sn alloy particle remnant Unreacted core; strengthens if well distributed
  • γ₁ (gamma-1) Ag–Hg Principal matrix; relatively corrosion-resistant
  • γ₂ (gamma-2) Sn–Hg Weak, corrosion-prone ; linked to breakdown and ditching in low-copper amalgams

η' (eta-prime) Cu–Sn (e.g., Cu₆Sn₅) in high-copper systems Replaces γ₂ pathway; improves corrosion resistance and strength

High-copper amalgams (single-composition or admixed) are modern standard teaching: copper reacts preferentially with tin so γ₂ is minimized or eliminated , improving clinical performance.

Properties and clinical behavior

Property Amalgam teaching point

Strength Adequate compressive strength for many posterior loads after full set; early strength lower—avoid heavy occlusion immediately

Creep Time-dependent plastic deformation under load; high creep associated with marginal breakdown; high-copper alloys show lower creep

Dimensional change Slight contraction or expansion depending on composition/technique; zinc + moisture → delayed expansion

Corrosion Seals microgaps over time (corrosion products) but excessive corrosion weakens low-copper alloys

Thermal conductivity High → deep amalgams may need base/liner for pulp thermal protection historically emphasized

  • Esthetics Metallic gray—not for aesthetic zones
  • Bond to tooth None chemically—needs mechanical retention form
  • Longevity Excellent track record in stress-bearing posterior restorations when isolation and form are correct
  • Advantages and limitations
  • Advantages Limitations
  • Durable in heavy occlusion Poor aesthetics

Technique relatively forgiving of mild moisture vs composite bonding Requires more tooth removal for retention (undercuts)

  • Self-sealing corrosion products Mercury content—public concern; environmental handling rules
  • Good wear resistance Can fracture tooth if large/weak cusps not protected
  • Radiopaque Galvanic effects with dissimilar metals possible

Mercury safety (exam level): Set amalgam is stable for clinical use; occupational risk is mainly from vapor during placement/removal —use water spray, high-volume suction, rubber dam, and proper scrap storage. True allergy is uncommon; lichenoid contact reactions are a separate Type IV discussion.

  • Indications (typical)
  • Moderate-to-large posterior restorations where isolation for bonding is poor and aesthetics are not critical
  • Core build-ups in non-aesthetic zones (composite/RMGI cores often compete)
  • Patients where moisture control or cooperation limits adhesive success
  • Situations needing a robust direct metallic restoration under heavy function
  • Composite Resin
  • Basic structure

Dental composite = resin matrix + inorganic filler + coupling agent (silane) + initiators/accelerators + pigments/stabilizers.

Component Role

Matrix (e.g., Bis-GMA, UDMA, TEGDMA) Polymerizable organic phase; TEGDMA lowers viscosity but may increase shrinkage

Filler (silica, glass, zirconia-silica) Strength, wear resistance, ↓ shrinkage relative to unfilled resin, radiopacity, handling

  • Silane coupling agent Bonds filler to resin so stress transfers through the composite
  • Photoinitiator (e.g., camphorquinone systems) Light-activated free-radical polymerization
  • Classification by filler (common teaching)
  • Type Filler character Clinical use notes
  • Macrofill (historical) Large particles Rough; rarely used today
  • Microfill Submicron silica Excellent polish/esthetics; weaker—anteriors, not heavy stress
  • Hybrid / microhybrid Mixed particle sizes Strength + decent polish; universal workhorses historically

Nanofill / nanohybrid Nano-scale particles ± blends High polish retention + strength; common modern universal composites

Flowable Lower filler % Lower viscosity; liners, small preparations, PRR; higher shrinkage stress risk

Packable / condensable Higher viscosity Posterior handling mimic of amalgam—less emphasized than early marketing suggested

Bulk-fill Chemistry/translucency for thicker increments Faster posterior placement if used per depth limits

Filler loading roughly tracks mechanical properties: more filler (by volume) → higher strength/modulus, lower polymerization shrinkage strain of the paste , better wear—up to limits of handling.

Polymerization

Most direct composites are light-cured free-radical addition polymers:

  • Light (typically blue, ~468 nm for CQ) activates initiator system
  • Free radicals open methacrylate double bonds
  • Polymer network forms; degree of conversion is never 100%
  • Material hardens; residual monomer and incomplete cure at depth are clinical risks
  • Factor improving cure Factor impairing cure
  • Adequate light intensity and correct wavelength Old/damaged light, wrong tip distance
  • Appropriate exposure time Too short exposure
  • Incremental thickness within manufacturer limits Oversized bulk beyond material capability
  • Light color-compatible shade/translucency Very dark/opaque shades need more attention

Chemical-cure / dual-cure systems are used for cores, cements, and deep areas where light access is limited.

Polymerization shrinkage and C-factor

Composite shrinks toward the center of the mass / toward bonded walls as monomers pack closer— volumetric shrinkage often taught in the ~2–5% range depending on formulation.

C-factor (configuration factor) = bonded surfaces / unbonded surfaces .

C-factor Example Stress implication

High (e.g., ~5) Class I box with five walls bonded, only occlusal free High shrinkage stress → debond, cusp flexure, postoperative sensitivity, white line margins

  • Moderate Class II Intermediate
  • Low Class IV or small chip with few bonded walls Stress relieved more easily

Clinical controls for shrinkage stress:

  • Incremental placement (oblique layers) to lower effective C-factor per increment
  • Soft-start or appropriate light protocols (material-dependent teaching)
  • Bond to enamel margins when possible (stronger, more stable bond)
  • Avoid overheating pulp with excessive continuous light on deep preps
  • Use of liners/flowables judiciously (does not eliminate need for good technique)
  • Bulk-fill materials only within their indicated depth and technique
  • Clinical strengths and weaknesses of composite
  • Strengths Weaknesses
  • Excellent aesthetics Technique sensitive (isolation, bonding)
  • Conserves tooth (adhesion) Polymerization shrinkage stress
  • Bonds and can reinforce remaining structure Wear/degradation over time; secondary caries if seal fails
  • Versatile for III, IV, V, I, II Requires enamel for best margins when possible
  • Repairable Depth of cure limits; light access

Indications: aesthetic restorations; conservative posterior restorations with good isolation; recontouring; diastema closure; core build-ups (appropriate materials); sealants/PRR (related resin systems).

  • Glass Ionomer Cement (GIC) and Resin-Modified GIC
  • Chemistry and bond

Conventional GIC: fluoroaluminosilicate glass powder + polyalkenoic acid liquid (e.g., polyacrylic acid). Setting is an acid–base reaction (not free-radical polymerization).

Chemical adhesion: carboxyl groups of polyacid chelate/bond to calcium in enamel and dentin—true ionic adhesion without light (though conditioning improves performance).

  • Property Conventional GIC Resin-modified GIC (RMGI)
  • Set Acid–base Acid–base + resin polymerization (light/dual)
  • Moisture More tolerant than composite bonding, still not “wet field ignore” Improved early strength/handling

Strength / wear Lower—avoid heavy stress-bearing bulk alone Better than conventional; still < hybrid composite for high stress

  • Fluoride Significant release/recharge potential Fluoride release retained
  • Aesthetics Opaque/acceptable Improved translucency
  • Finish Sensitive early Can finish earlier after light cure (product-dependent)
  • Fluoride release

GIC releases fluoride into adjacent tooth and plaque fluid and can be recharged by topical fluorides—useful for high caries risk, root caries, and sandwich techniques. Fluoride release alone does not replace plaque control or justify leaving open margins.

Clinical uses

  • Use Why GIC/RMGI fits
  • Root caries / Class V in elders Adhesion to dentin/cementum, fluoride, moisture tolerance
  • High caries-risk temporary or transitional restorations Fluoride; easy repair/replace

Liner/base under composite (open/closed sandwich) Seals dentin, fluoride, reduces configuration stress somewhat

  • Atraumatic restorative treatment (ART) Hand excavation + GIC in public health settings
  • Luting (some GICs) Chemical bond for crowns/ortho bands (select products)
  • Pediatric restorations when isolation poor Handling and fluoride advantages

Not ideal as sole material for large stress-bearing posterior restorations in adults when composite or amalgam/indirect options are feasible—wear and fracture risk.

Comparative Selection Table

  • Criterion Amalgam Composite GIC/RMGI
  • Aesthetics Poor Excellent Fair–good (RMGI better)
  • Primary retention Mechanical Micromechanical/chemical adhesion systems Chemical ± light resin
  • Moisture tolerance Moderate Poor for bonding steps Better than composite
  • Fluoride None meaningful None (unless giomer-type hybrids) Yes
  • Shrinkage stress N/A (sets metallurgically) Significant issue Low polymerization stress (conventional)
  • Heavy occlusion bulk Strong Good with proper design Weakest
  • Tooth conservation Least (retention form) Best Good
  • Failure Modes Worth Memorizing

Amalgam: marginal ditching (historical γ₂/creep), bulk fracture, tooth cusp fracture, recurrent caries at margins, galvanism

Composite: debonding from shrinkage stress, secondary caries from leakage, wear, discoloration, postoperative sensitivity from open margins or aggressive etch on deep dentin without protection strategy

GIC: wear, fracture in stress, early moisture contamination of conventional set, desiccation cracking if unprotected

AFK Integration Scenarios

Large MOD in a second molar, poor isolation, heavy bruxism, low aesthetic demand → amalgam (or indirect) often more reliable than a heroic multi-surface composite.

Class IV fracture central incisor → composite with enamel bevel and adhesive protocol.

Root caries on buccal of mandibular premolar, high risk → RMGI/GIC excellent first-line direct choice.

High C-factor deep Class I → incremental composite, excellent bond to enamel rim, consider liner; do not bulk improperly.

Why high-copper amalgam is preferred → eliminates/reduces γ₂ → less corrosion, less creep, better margins.

  • Rapid review list
  • Amalgam phases: γ, γ₁, γ₂; high-copper → η′ pathway, little γ₂
  • Creep ↑ with poor alloys → marginal failure
  • Composite = resin + filler + silane; light cure; shrinkage + C-factor drive stress
  • GIC = acid–base glass + polyacid; chemical bond; fluoride release
  • Match material to load, isolation, aesthetics, and caries risk

Section 7.3 details how adhesives create the hybrid layer that makes composite dentistry work, and how liners/bases and pulp caps protect the pulp when preparations deepen.