Study guide
6.1 The OACETT Act, 1998 & Self-Regulatory Status
OACETT Professional Practice Exam PPE
Track your progress as you read
Finished sections get a check mark.
1 Introduction
About the OACETT PPE: Format, Sources, Fees & Study Plan
2 Chapter 1: Canadian Legal System, Tort Law & Professional Liability
1.1 The Canadian Legal System, Constitutional Divisions & Courts 1.2 Principles of Tort Law, Duty of Care & Professional Negligence 1.3 Professional Liability, Pure Economic Loss & Limitation Periods
3 Chapter 2: Contract Law, Tendering & Business Organizations
2.1 Essential Elements of a Valid Contract 2.2 Contract Interpretation, Performance, Breach & Remedies 2.3 Tendering Law & Key Engineering Contract Clauses 2.4 Business Organizations & Professional Practice Structures
4 Chapter 3: Workplace Legislation, Environmental Law & Intellectual Property
3.1 Ontario Occupational Health and Safety Act (OHSA) & Worker Rights 3.2 Employment Standards Act & Ontario Human Rights Code 3.3 Labour Relations Act, WSIA & Workers' Compensation 3.4 Intellectual Property Protection & Environmental Regulations
5 Chapter 4: Professional Ethics, The Paramount Duty & Technical Competence
4.1 Foundations of Professional Ethics & Moral Reasoning 4.2 Analyzing Ethical Problems: Statement Types, Problem Types & the Design Model 4.3 The OACETT Code of Ethics: Clauses (a) to (k), the Rules & the Paramount Duty 4.4 Professional Competence & Objective Technical Opinions
6 Chapter 5: Professional Conduct, Conflicts of Interest & Duty to Report
5.1 Loyalty, Confidentiality & Fair Dealing with Clients and Employers 5.2 Identifying, Disclosing & Managing Conflicts of Interest 5.3 Overruled Judgments, Duty to Report & Whistleblowing
7 Chapter 6: OACETT Act, By-law 20 & Certification Governance
6.1 The OACETT Act, 1998 & Self-Regulatory Status 6.2 Certification Pathways: C.Tech. vs. C.E.T., the RPPC & the Admission Steps 6.3 OACETT By-law 20: Governance, Membership Classes & Rights
8 Chapter 7: Professional Misconduct, Discipline & Practice Standards
7.1 Professional Misconduct & Incompetence: Rules of Professional Conduct 3.1 to 3.11 7.2 Complaints and Disciplinary Procedures 7.3 CPD, the Member Identification Stamp & Professional Responsibility
6.1 The OACETT Act, 1998 & Self-Regulatory Status
Key Takeaways Explain This Topic AI
OACETT was incorporated in 1962, received its own Act in 1984, and operates under the OACETT Act, 1998 (Bill Pr25, S.O. 1998, c. Pr7), which received Royal Assent on December 18, 1998.
Section 2 of the Act lists eight objects, including maintaining discipline among members and enforcing high ethical and professional standards of conduct.
Under section 7, the council (now the Board) makes by-laws, but a new by-law expires at the end of the next annual meeting unless the members confirm it.
Section 11 reserves the designations C.Tech., C.E.T., A.Sc.T. and Certified Engineering Technician to registered members, and section 11(6) makes misuse an offence.
Sections 12 and 13 protect titles, not work: non-members may still perform technical work and call themselves technicians or technologists.
Last updated: October 2026
The OACETT Act, 1998 & Self-Regulatory Status
Professional self-regulation is a privilege that a provincial legislature grants to a body it trusts to set standards and discipline its own members. For engineering and applied science technicians and technologists in Ontario, that privilege rests on a short private statute: the Ontario Association of Certified Engineering Technicians and Technologists Act, 1998 . The Act has only 16 sections, and the Practice section of the Professional Practice Exam (PPE) expects you to know what each part does and, just as important, what the Act does not do.
1. Legislative History of OACETT
Year Event
1962 OACETT is incorporated by letters patent dated March 19, 1962, with the sponsorship of the Association of Professional Engineers of Ontario (APEO, now Professional Engineers Ontario)
1965 OACETT adopts its first Code of Ethics
1984 The Ontario Association of Certified Engineering Technicians and Technologists Act, 1984 gives the association its own governing statute
1998 Bill Pr25 re-enacts the governing Act: first reading November 24, second and third readings December 17, and Royal Assent December 18, 1998 (S.O. 1998, c. Pr7)
1999 The Institute of Engineering Technology of Ontario (IETO) is set up to run certification; its role later passed to today's Registration and Professional Practice Committee (RPPC)
The 1998 Act is a private Act . OACETT applied for it, and the preamble records that the association asked the Legislature to re-enact its governing statute, change its objects, structure and administration, add designations, and describe the work its members perform. Section 14 repeals the 1984 Act, and under section 15 the 1998 Act came into force on Royal Assent.
2. What Each Part of the Act Does
- Sections Heading Key Content
- 1 Association continued OACETT is continued as a corporation without share capital , composed of its members
- 2 Objects Eight objects (listed below)
- 3 Powers The Association has the capacity and the rights, powers and privileges of a natural person
4–5 Council The affairs of the Association are managed by its council (now called the Board of Directors), which has 12 to 24 councillors; elected councillors and officers must make up at least two-thirds
6 Officers The president, president-elect and vice-presidents are elected in accordance with the by-laws
7 By-laws The council may make by-laws; a new by-law or amendment takes effect when passed but expires at the end of the next annual meeting unless confirmed there; by-laws are open to public inspection at head office
8 Registration OACETT registers members who meet its requirements, in four classes; a person refused registration may appeal the refusal in accordance with the by-laws (s. 8(3))
- 9 Register OACETT keeps a register of members in good standing, open to public inspection at head office
- 10 Designations The titles each class may use
- 11 Prohibitions Who may not use the titles; contravention is an offence (s. 11(6))
- 12 Description of work What members' work consists of
13 Rights preserved Non-members keep the right to call themselves technicians or technologists and to do the work
- 14–16 General Repeal of the 1984 Act, commencement, short title
- The Eight Statutory Objects (Section 2)
To establish, maintain and conduct an institute or association within Ontario for technicians, engineering technicians, applied science technologists and engineering technologists, for the purpose of granting membership and registration to persons who meet the standards of the Association.
To maintain discipline among its members.
To assist members in advancing their status, recognition and welfare, and in increasing their knowledge, skill and proficiency.
To establish and maintain consistent registration requirements for technicians, engineering technicians, applied science technologists, engineering technologists and other classes of members.
To establish, promote and enforce high ethical and professional standards of conduct for members.
To accept donations, gifts, legacies and bequests for use in promoting its objects and carrying on its work.
To carry on benevolent work in connection with the families of dead, retired or incapacitated members who are in need.
To co-operate with other organizations whose objects are, in whole or in part, the same as or similar to its objects.
Objects 2 and 5 are the statutory foundation for OACETT's Code of Ethics, Rules of Professional Conduct, and discipline process. Object 3 explains why the association also delivers member services and continuing education. Exam questions often test whether you recognize that OACETT is both a certifying body and a professional association serving its members.
3. Classes, Titles and Title Protection (Sections 8, 10 and 11)
Section 8(2) creates four classes of registration, and section 10 attaches a designation to each:
Class (s. 8(2)) Designation (s. 10) Abbreviation
Certified technician Certified Technician C.Tech.
Certified engineering technician Certified Engineering Technician C.E.T. (s. 10(2))
Applied science technologist Applied Science Technologist A.Sc.T.
Certified engineering technologist Certified Engineering Technologist C.E.T.
Section 11 makes it an offence for anyone not registered in the relevant class to use the designation "alone or in combination with any other word, name, title, initial or description," or to "imply or hold out" that they belong to that class. Because the abbreviation C.E.T. historically served two classes, s. 11(5) allows only a certified engineering technician or a certified engineering technologist to use "C.E.T." Today OACETT certifies new members as C.Tech. or C.E.T.
Section 11(6) states that a person who contravenes any provision of section 11 is guilty of an offence. The Act sets no fine of its own. Prosecution would proceed under Ontario's Provincial Offences Act , whose general penalty in section 61 (a fine of up to $5,000) applies where a statute specifies none.
4. Title Protection vs. Right to Practice
The single most tested idea in this part of the PPE is that OACETT's Act protects titles , not work .
What Members Do: Section 12
Section 12(1) describes the work of all four classes as providing technical services:
(a) within the framework of practices, codes and standards established or enforced under an Act of Ontario or of Canada;
(b) within the framework of published standards in the applicable industry or field; and
(c) under the technical direction of a licensed member of an appropriate profession or, where no licensed professionals practise in the field, under the technical direction of an expert in the field.
Section 12(2) adds that this description does not authorize anyone to provide services that only persons authorized under an Act of Ontario or Canada may provide. A C.E.T. therefore cannot use section 12 as authority to practise professional engineering.
What Non-Members Keep: Section 13
Section 13 preserves the right of any person to describe themselves as a technician, engineering technician, technologist or engineering technologist, and to perform the work described in section 12(1). Only the specific protected designations are reserved.
- Dimension OACETT Act, 1998 (Title Protection) Professional Engineers Act (Licensure)
- Regulator OACETT Professional Engineers Ontario (PEO)
What is protected The designations C.Tech., C.E.T., A.Sc.T. and Certified Engineering Technician The title "professional engineer" and the practice of professional engineering
Effect on non-members May do the same technical work and call themselves technicians or technologists (s. 13), but may not use the protected designations May not practise professional engineering without a licence or a statutory exemption
Basis of members' work Codes, published standards, or the technical direction of a licensed professional (s. 12) Engineering principles applied to safeguard life, health, property, economic interests, the public welfare or the environment
The Professional Engineers Act (R.S.O. 1990, c. P.28) defines the practice of professional engineering as any act of planning, designing, composing, evaluating, advising, reporting, directing or supervising that requires the application of engineering principles and concerns the safeguarding of life, health, property, economic interests, the public welfare or the environment, or the managing of any such act. OACETT certification is not a PEO licence. Where a statute reserves work to a P.Eng., architect or land surveyor, a C.E.T. works under that licensed professional's direction (s. 12(1)(c)).
5. The Association as a Self-Governing Body
Corporation without share capital: OACETT has no shareholders. By-law 20 (s. 1.2.3) requires any surplus to be applied to the association's objects and never divided among members.
Governed by its members: The council, called the Board of Directors in By-law 20, manages OACETT's affairs. Most Board members are elected by Certified Members, and By-law 20 requires that at least 51% be elected or acclaimed.
Accountable to the public: The register (s. 9) and the by-laws (s. 7(3)) are open to public inspection. OACETT also files an annual Fair Registration Practices report with Ontario's Office of the Fairness Commissioner under the Fair Access to Regulated Professions and Compulsory Trades Act, 2006 .
Self-funded: Application fees, annual dues and examination fees, approved by the Board under By-law 20, s. 8.1, pay for admissions, the PPE, CPD audits and discipline.
Common Exam Traps
The Act was passed in 1998 and replaced the 1984 Act. OACETT itself dates from 1962 .
The Act creates title protection, not an exclusive scope of practice (ss. 11 and 13).
The Act does not contain the Code of Ethics or the discipline procedure. Those are in the Board-approved Code of Ethics and Rules of Professional Conduct, By-law 20 (s. 2.5), and the RPPC Terms of Reference.
A by-law passed by the Board expires at the end of the next annual meeting unless the members confirm it (s. 7(2)).