Study guide

10.5 Pesticide Fate in the Environment

Ontario Pesticide Applicator Core Exam OPT&C

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Certification vs MECP Licence 1.3 Closed-Book Study Strategy

2 Legislation & Federal–Provincial Framework

2.1 Federal PMRA and the Pest Control Products Act 2.2 Ontario Pesticides Act and O. Reg. 63/09 2.3 Ontario Pesticide Classes A–E 2.4 What Is a Pesticide and Who Needs a Licence

3 Licensing Roles & Categories

3.1 Exterminator Licence Categories Overview 3.2 Technicians, Trainees, and Supervision 3.3 Operator and Vendor Licences

4 Pesticide Labels

4.1 The Label Is the Law 4.2 Signal Words and Hazard Statements 4.3 PCP Number and Product Identity 4.4 Directions for Use, REI, PHI, and SDS

5 Toxicology & First Aid

5.1 Routes of Exposure 5.2 Toxicity Measures: LD50 and Related Concepts 5.3 Recognizing Pesticide Poisoning 5.4 First Aid and Decontamination

6 Personal Protective Equipment

6.1 Label PPE Requirements 6.2 Gloves, Protective Clothing, and Eye Protection 6.3 Respirators 6.4 PPE Care, Cleaning, and Removal

7 Formulations & Equipment

7.1 Formulation Types 7.2 Application Equipment and Nozzles 7.3 Adjuvants and Tank Mixes 7.4 Pesticide Types, Selectivity, and Modes of Action

8 Application Rates & Calibration

8.1 Safe Mixing and Loading 8.2 Calibration Basics 8.3 Application Rate Calculations

9 Integrated Pest Management

9.1 IPM Philosophy and Steps 9.2 Pest Identification and Monitoring 9.3 Action Thresholds 9.4 Non-Chemical Tactics and Resistance Management

10 Environmental Protection

10.1 Drift and Weather 10.2 Protecting Groundwater and Surface Water 10.3 Pollinators and Non-Target Organisms 10.4 Buffers and Sensitive Sites 10.5 Pesticide Fate in the Environment

11 Ontario Cosmetic Pesticide Ban

11.1 Cosmetic Pesticide Ban Rules and the Allowable List 11.2 Exceptions to the Cosmetic Ban

12 Storage, Transport & Disposal

12.1 Secure Pesticide Storage 12.2 Transporting Pesticides Safely 12.3 Triple Rinse and Empty Containers 12.4 Leftover Product, Recycling, and Disposal

13 Emergency & Spill Response

13.1 Spill Response Steps 13.2 Spill Kits and Pesticide Fires 13.3 Spills Action Centre Reporting

10.5 Pesticide Fate in the Environment

Key Takeaways Explain This Topic AI

Adsorption binds pesticide to the surface of clay and organic matter and reduces movement; absorption is uptake into a plant or organism; desorption releases bound product back into the soil solution.

Breakdown occurs by microbial degradation (usually the largest route in warm, moist, biologically active soil), chemical degradation such as hydrolysis, and photodegradation by sunlight.

Persistence is often expressed as half-life—the time for half the applied amount to break down; longer half-life means longer control but greater carryover, residue, and non-target exposure risk.

Movement pathways are leaching downward, runoff across the surface, volatilization into vapour, and drift during application; sandy low-organic soils over a shallow water table are the classic leaching hot spot.

Persistent, fat-soluble residues can bioaccumulate in organisms and biomagnify up the food chain—the mechanism behind secondary poisoning of predators and scavengers.

Last updated: August 2026

10.5 Pesticide Fate in the Environment

Quick Answer: Fate is what happens to a pesticide after it leaves the nozzle. Product can be adsorbed onto soil particles, absorbed into plants and organisms, broken down by microbes, chemistry, or sunlight, or moved by leaching, runoff, volatilization, and drift. Persistence (often described as half-life ) decides how long any of that matters. Sandy, low-organic soils over a shallow water table are the classic high-risk site for leaching; hot, dry, windy conditions are the classic high-risk conditions for volatilization.

Sections 10.1–10.4 covered how product leaves the target area and who it can harm. This section explains what happens to the product that stays —in soil, on plants, and in water. Ontario Core candidates are expected to reason about site vulnerability and product behaviour, not just to memorize a buffer number.

The four things that can happen to an applied pesticide

  • Outcome What it means
  • It binds Adsorption onto soil particles and organic matter holds product in place
  • It is taken up Absorption into plants, soil organisms, or animals
  • It breaks down Degradation by microbes, chemical reaction, or sunlight
  • It moves Leaching down, runoff across, volatilization into air, or drift during application

Most applications involve all four at once in different proportions. The proportions depend on the active ingredient , the formulation , the soil , the weather , and the rate and timing you chose.

Adsorption, desorption, and absorption

These three words look alike and are a favourite exam trap.

Term Definition Consequence

Adsorption The pesticide binds to the surface of soil particles, especially clay and organic matter Product is held in the upper soil, less available to leach and often less available to the pest

Desorption The bound pesticide is released back into the soil solution Slow re-release can extend availability—and extend the window for movement

Absorption The pesticide is taken up into a plant, organism, or material Basis of systemic action; also the basis of crop residues

Memory hook: ad s orption = s ticks to the surface; ab s orption = taken in side.

Soils high in clay and organic matter adsorb strongly. Coarse sandy soils low in organic matter adsorb weakly—which is exactly why Section 10.2 flags sand plus a shallow water table as elevated groundwater risk.

Breakdown: how pesticides degrade

Process Driver Notes

Microbial degradation Soil bacteria and fungi consuming the chemical Usually the largest breakdown route in warm, moist, biologically active soil; slows in cold, dry, compacted, or sterile soil

Chemical degradation Reactions in the soil or spray water, including hydrolysis (reaction with water) Strongly affected by pH ; some products degrade quickly in alkaline spray water, which is why labels may discuss water quality

Photodegradation Sunlight breaking down residues on exposed surfaces Affects product left on the soil surface, foliage, or hard surfaces; incorporation or irrigation may be required by the label to reduce loss

Breakdown is generally good for the environment and bad for residual control —the same property read from two directions. Conditions that slow microbial activity (cold, waterlogged, very dry, very acidic, or heavily compacted soils) extend persistence.

Persistence and half-life

Persistence is how long a pesticide stays active in the environment. It is often expressed as a half-life : the time it takes for half of the applied amount to break down.

Persistence Benefit Risk

Longer half-life Longer control from one application; fewer trips Carryover to the next crop or season, longer re-entry and residue concerns, longer non-target exposure, greater chance of moving off site before it degrades

Shorter half-life Lower carryover and residue risk May require repeat applications, and repeats are themselves an exposure and resistance consideration

Labels manage persistence with rotational-crop / planting-back restrictions , re-treatment intervals , maximum applications per season , and restricted-entry intervals . Those numbers are not arbitrary caution—they are the label's expression of fate data.

Exam discipline: half-life describes breakdown in the environment . It is not the shelf life of the jug, and it never authorizes cutting the labelled rate in half.

  • Movement pathways
  • Leaching (downward)

Water moving down through soil carries dissolved pesticide toward the water table. Leaching risk rises with:

  • Coarse, sandy soil and low organic matter (weak adsorption)
  • Shallow water table (short travel distance)
  • Highly water-soluble, weakly adsorbed active ingredients
  • Heavy rain or over-irrigation shortly after application
  • Preferential flow paths : cracks, macropores, sinkholes, poorly sealed well annuli
  • Runoff (across)

Water moving over the surface carries pesticide either dissolved or bound to eroding soil particles . Risk rises on slopes, on compacted or frozen ground, on bare soil, and when rain follows soon after application.

Volatilization (into the air)

Volatilization is the change from liquid or solid deposit into vapour . It is the source of vapour drift (Section 10.1) and it also represents real product loss from the target.

  • Increases volatilization Reduces it
  • High temperature Cooler application timing
  • Low relative humidity Higher humidity
  • Wind moving vapour away from the surface Calm, non-inversion conditions within label limits
  • Volatile active ingredients and some formulations Products and formulations with lower vapour pressure
  • Product left on the surface Soil incorporation or irrigation where the label directs it
  • Drift (during application)

Covered in Section 10.1—listed here so the full picture of "where the product went" is in one place.

Residues, food, and the food chain

Residues are the amounts of pesticide remaining on or in plants, soil, water, surfaces, or organisms after application.

Health Canada's PMRA sets maximum residue limits (MRLs) for pesticide residues in food under the Pest Control Products Act ; where no specific MRL has been set, a general default limit applies through the Food and Drug Regulations framework.

Pre-harvest intervals (PHI) on the label exist to keep harvested crops within those limits (Section 4.4).

Restricted-entry intervals (REI) manage residues that people would contact by re-entering treated areas.

Bioaccumulation and biomagnification

Some persistent, fat-soluble chemicals can build up in an organism faster than the organism eliminates them ( bioaccumulation ) and reach higher concentrations at each step up the food chain ( biomagnification ). This is the underlying mechanism behind the secondary poisoning concept in Section 10.3: a predator that eats many contaminated prey animals receives a larger dose than any single prey animal carried.

Modern registered products are evaluated for these properties, but the concept still governs professional judgment: do not create unnecessary residues, and follow wildlife and bait-placement statements exactly.

Soil and site factors that change fate

  • Factor Effect
  • Soil texture Sand moves water and solutes fast; clay adsorbs and slows movement
  • Organic matter More organic matter usually means more adsorption and more microbial breakdown
  • Soil pH Affects chemical degradation (hydrolysis) and the availability of some actives
  • Soil moisture Needed for microbial activity, but excess moisture drives leaching and runoff
  • Soil temperature Warmth speeds microbial and chemical breakdown; cold slows it
  • Slope and cover Slope and bare ground favour runoff; vegetation slows it
  • Depth to water table Shorter distance means less soil to intercept a leaching product

Two identical applications on two properties can have completely different environmental outcomes because of these factors. That is why Core teaches you to assess the site , not just read the jug.

Turning fate knowledge into field decisions

Read the label's environmental hazard and groundwater advisory statements before you plan the job.

On coarse soils, shallow water tables, or recharge areas, prefer less mobile or less persistent options when IPM and the label allow.

Apply at the labelled rate —excess is the single easiest way to create both residue and movement problems.

Avoid applying immediately before heavy rain or irrigation when the label or conditions warn against it.

Incorporate or irrigate in when the label directs it to limit volatilization and photodegradation.

Respect setbacks, buffers, and rotational-crop restrictions —they encode fate data you cannot see.

Keep records of product, rate, site, and weather so a later question about carryover or off-site injury can be answered with facts.

Exam-style scenarios

Scenario A — Word choice. Product binds to clay and organic matter → adsorption . Product is taken up into the plant → absorption . Product turns to vapour → volatilization . Product carried down through the soil profile by water → leaching .

Scenario B — Breakdown. A cold, saturated, compacted soil in early spring degrades product more slowly than a warm, moist, biologically active soil in June, because microbial activity is reduced.

Scenario C — Site vulnerability. Sandy soil, 3 m to the water table, mobile active ingredient, heavy rain forecast tonight → the highest-risk combination for groundwater ; follow label groundwater precautions or reschedule.

Scenario D — Persistence trade-off. A residual herbicide gives season-long control and may carry a planting-back restriction for the next crop. Both facts come from the same persistence property.

Scenario E — Food chain. A predator that eats many poisoned rodents can receive far more active ingredient than any one rodent held—the practical face of biomagnification and secondary poisoning.

Memory card for Section 10.5

  • Item Remember
  • Adsorption Sticks to soil particles (clay, organic matter)
  • Absorption Taken up inside a plant or organism
  • Breakdown Microbial (largest), chemical/hydrolysis, photodegradation
  • Persistence Half-life = time for half to break down
  • Leaching Down through soil—sand, shallow water table, mobile actives, excess water
  • Runoff Across the surface—slope, bare ground, rain after application
  • Volatilization Deposit becomes vapour—heat, low humidity, wind, volatile actives
  • Food chain Bioaccumulation and biomagnification behind secondary poisoning

Fate closes the environmental protection chapter: drift and buffers keep product on target , and fate knowledge keeps the product that lands there from becoming tomorrow's water, residue, or wildlife problem.