Study guide

5.1 Insect & Arthropod Biology: Anatomy, Orders & Metamorphosis

Ontario Pesticide Structural Exterminator Module Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Ontario Pesticide Legislation, Regulatory Framework & Licensing

1.1 Regulatory Authorities & Statutory Framework 1.2 Structural Exterminator Licensing & Qualifications 1.3 Warning Signs, Storage & Transportation Rules 1.4 Record-Keeping & Controlled Substances 1.5 Pesticide Classes, Purchase Rules & the Cosmetic Pesticides Ban

2 Chapter 2: Pesticide Safety, Toxicology & Environmental Protection

2.1 Pesticide Classification, Labels & Formulations 2.2 Toxicology, Exposure Routes & Personal Protective Equipment 2.3 Environmental Fate, Spills Action Centre & Emergency Response 2.4 Insecticide Modes of Action & Resistance Management

3 Chapter 3: Structural IPM, Inspection & Site Management

3.1 Structural IPM Principles, Monitoring & Action Thresholds 3.2 Structural Inspection Methodology, Sanitation & Exclusion 3.3 Sensitive Sites, Occupant Notification & Re-Entry

4 Chapter 4: Vertebrate Pests of Structures — Rodents, Birds & Wildlife

4.1 Norway Rats, Roof Rats & House Mice Biology 4.2 Rodent Inspection, Exclusion & Non-Chemical Control 4.3 Rodenticides, Baiting Strategies & Secondary Poisoning Risks 4.4 Pest Birds: Pigeons, Starlings & House Sparrows 4.5 Bats, Wildlife & the Limits of a Pesticide Licence

5 Chapter 5: Biology & Control of Structural Insects and Other Arthropods

5.1 Insect & Arthropod Biology: Anatomy, Orders & Metamorphosis 5.2 Cockroach Identification, Biology & Control 5.3 Structural Ants Biology, Nesting & Baiting 5.4 Bed Bug Biology, Inspection & Integrated Management 5.5 Stored Product Pests & Flea Management 5.6 Filth & Nuisance Flies in Structures 5.7 Fabric Pests, Silverfish & Occasional Invaders 5.8 Stinging Insects, Spiders, Ticks & Mites

6 Chapter 6: Wood-Destroying Organisms & the Termite Class Boundary

6.1 Termite Biology, Castes & Detection 6.2 Termite Control Techniques & Chemical Barriers 6.3 Powderpost Beetles, Carpenter Ants & Wood Decay

7 Chapter 7: Application Equipment, Calibration & Techniques

7.1 Compressed Air Sprayers & Structural Equipment 7.2 Nozzle Selection, Spray Patterns & Droplet Dynamics 7.3 Equipment Calibration & Delivery Rates 7.4 Specialized Tools: Dusters, Foggers & Bait Applicators

8 Chapter 8: Structural Treatment Calculations & Math

8.1 Structural Area, Perimeter & Volume Calculations 8.2 Liquid Dilution & Tank Mixing Calculations 8.3 Active Ingredient (a.i.) & Finished Spray Rate Math 8.4 Space Treatment, Fogging & Bait Density Calculations

5.1 Insect & Arthropod Biology: Anatomy, Orders & Metamorphosis

Key Takeaways Explain This Topic AI

Insects have three body regions, three pairs of legs and one pair of antennae; arachnids have two body regions, four pairs of legs and no antennae.

Centipedes carry one pair of legs per body segment and are predators, while millipedes carry two pairs per segment and feed on decaying plant material.

Ametabolous development (silverfish, firebrats) involves no metamorphosis and continued moulting as an adult; gradual metamorphosis produces nymphs; complete metamorphosis inserts a larval and a pupal stage.

Mouthpart type dictates tactics: chewing and lapping insects can be baited, while a piercing-sucking insect such as a bed bug will never take a bait.

Complete metamorphosis usually separates the larva and the adult by habitat and food, so a control programme must find and treat the larval site rather than only the visible adults.

Last updated: September 2026

5.1 Insect & Arthropod Biology: Anatomy, Orders & Metamorphosis

Note

This is the section the rest of the chapter rests on. Almost every "why did the treatment fail" question in structural pest control resolves to one of three biological facts: the specimen was placed in the wrong group, the wrong life stage was targeted, or the mouthparts made the chosen formulation useless.

Placing a Specimen: The Arthropod Classes

All the animals in this chapter are arthropods — segmented bodies, jointed appendages, an external skeleton of chitin, and growth by moulting (ecdysis). Beyond that they diverge, and a count of body regions and legs settles the identification in seconds.

Group Body regions Legs Antennae Structural examples

Insecta (insects) 3 — head, thorax, abdomen 3 pairs, all on the thorax 1 pair Cockroaches, ants, beetles, flies, moths, fleas, bed bugs

  • Arachnida (arachnids) 2 — cephalothorax and abdomen 4 pairs none Spiders, mites, ticks, pseudoscorpions
  • Chilopoda (centipedes) head plus many segments 1 pair per segment 1 pair House centipede — a predator

Diplopoda (millipedes) head plus many segments 2 pairs per segment 1 pair Millipedes — feed on decaying plant matter

Isopoda (crustaceans) head, thorax, abdomen 7 pairs 2 pairs Sowbugs and pillbugs — breathe through gills, so they need constant moisture

Two operational conclusions fall straight out of that table. A millipede invasion is a moisture and organic-debris problem outdoors; a house centipede indoors is telling you there are other insects present for it to eat. And sowbugs indoors always mean liquid water , because a gill-breathing crustacean cannot survive a dry basement.

The Insect Body

Head — carries the eyes, the antennae (the primary chemical and tactile sense organs) and the mouthparts.

Thorax — three segments, each bearing a pair of legs; the second and third may bear wings.

Abdomen — houses digestion and reproduction, and bears the spiracles , the openings of the tracheal system through which the insect breathes.

Because insects breathe passively through spiracles into tracheal tubes, they have no lungs and no efficient way to hold their breath — which is part of why desiccant dusts and some fumigants work so well against them.

The cuticle carries a thin outer wax layer that controls water loss. Amorphous silica gel and diatomaceous earth kill by adsorbing or abrading that layer; because this is a physical mechanism, there is no enzymatic route to resistance.

Mouthparts Decide the Formulation

Mouthpart type How it works Structural pests What you can use

Chewing Opposed mandibles bite and grind Cockroaches, beetles, ants, crickets, earwigs, termites Baits work; larvae ingest treated material

Piercing-sucking A stylet or beak pierces tissue and draws liquid Bed bugs, mosquitoes, fleas, true bugs Baits are useless ; rely on residual contact, dusts, heat, steam, exclusion

Sponging A spongy labellum laps liquefied food; solids are dissolved with regurgitated fluid House flies and other filth flies Sugar-based fly baits and treated surfaces work

Siphoning A coiled proboscis takes nectar Adult moths and butterflies Adults do little damage; target the larva

Important

Adult clothes moths do not feed. Their mouthparts are non-functional. Every hole in a woollen garment was made by a larva, which is why fabric pest control targets larval harbourage rather than flying adults, and why pheromone traps are a monitoring tool rather than a control.

  • The Three Patterns of Development
  • Ametabolous — no metamorphosis

Egg → immature → adult, with no change in form. Immatures are miniature adults sharing the same food and habitat, and unusually the adult keeps moulting throughout its life. Silverfish and firebrats are the structural examples.

Hemimetabolous — gradual or incomplete metamorphosis

Egg → nymph (several instars) → adult. Nymphs resemble adults, live in the same harbourage and eat the same food; wings, where present, develop externally as pads. Structural examples: cockroaches, bed bugs, true bugs, earwigs, termites and lice .

Control consequence: one habitat, one food source, one treatment location. A residual placed where the adults harbour also contacts the nymphs.

Holometabolous — complete metamorphosis

Egg → larva → pupa → adult. The larva usually differs completely from the adult in form, food and habitat, and the pupa neither feeds nor moves. Structural examples: beetles, flies, moths, fleas, ants, bees and wasps .

Control consequence: two different targets and one that is nearly untouchable. The flea pupa inside its silken cocoon is famously tolerant of insecticide, producing the "pupal window" of continuing emergence after a treatment — the biological reason vacuuming and follow-up visits are mandatory. In fabric pests and stored product pests the adults you see are the dispersal stage; the damage and the population both live at the larval site you have not yet found.

  • Pattern Stages Immature resembles adult? Same food and habitat? Examples
  • Ametabolous egg, immature, adult Yes Yes Silverfish, firebrat
  • Gradual egg, nymph, adult Yes Usually Cockroach, bed bug, earwig, termite
  • Complete egg, larva, pupa, adult No Usually not Beetle, fly, moth, flea, ant, wasp
  • Orders Worth Knowing by Name

Blattodea — cockroaches, and now also the termites, which older manuals still place in the separate order Isoptera . Either name may appear; both refer to the same insects.

Coleoptera — beetles. The largest order; hardened forewings (elytra) meet in a straight line down the back. Carpet beetles, flour beetles, powderpost beetles.

Diptera — true flies. One pair of functional wings; the hind pair is reduced to knob-like halteres . House flies, cluster flies, drain flies, phorid flies.

Hymenoptera — ants, bees and wasps. Two pairs of membranous wings; social species have castes.

Lepidoptera — moths and butterflies, with wings covered in scales. Indian meal moth, clothes moths.

Siphonaptera — fleas. Wingless, flattened side to side, with jumping hind legs.

Hemiptera — true bugs, including bed bugs and boxelder bugs, with a piercing-sucking beak.

Zygentoma (older texts: Thysanura) — silverfish and firebrats.

Dermaptera — earwigs, recognised by the forceps-like cerci at the abdomen tip.

Quick field discriminations that earn marks

Winged ant versus winged termite: the ant has elbowed antennae, a pinched waist, and forewings noticeably longer than the hind wings; the termite has straight bead-like antennae, a broad waist, and four wings of equal length.

True fly versus other winged insect: count the wings. Two means Diptera.

Spider versus insect: eight legs and no antennae means arachnid, so an insecticide bait will never be taken.

Millipede versus centipede: two pairs of legs per segment and a slow cylindrical body means millipede; one pair per segment and a fast flattened body means centipede.