Study guide
3.2 Structural Inspection Methodology, Sanitation & Exclusion
Ontario Pesticide Structural Exterminator Module Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Ontario Pesticide Legislation, Regulatory Framework & Licensing
1.1 Regulatory Authorities & Statutory Framework 1.2 Structural Exterminator Licensing & Qualifications 1.3 Warning Signs, Storage & Transportation Rules 1.4 Record-Keeping & Controlled Substances 1.5 Pesticide Classes, Purchase Rules & the Cosmetic Pesticides Ban
2 Chapter 2: Pesticide Safety, Toxicology & Environmental Protection
2.1 Pesticide Classification, Labels & Formulations 2.2 Toxicology, Exposure Routes & Personal Protective Equipment 2.3 Environmental Fate, Spills Action Centre & Emergency Response 2.4 Insecticide Modes of Action & Resistance Management
3 Chapter 3: Structural IPM, Inspection & Site Management
3.1 Structural IPM Principles, Monitoring & Action Thresholds 3.2 Structural Inspection Methodology, Sanitation & Exclusion 3.3 Sensitive Sites, Occupant Notification & Re-Entry
4 Chapter 4: Vertebrate Pests of Structures — Rodents, Birds & Wildlife
4.1 Norway Rats, Roof Rats & House Mice Biology 4.2 Rodent Inspection, Exclusion & Non-Chemical Control 4.3 Rodenticides, Baiting Strategies & Secondary Poisoning Risks 4.4 Pest Birds: Pigeons, Starlings & House Sparrows 4.5 Bats, Wildlife & the Limits of a Pesticide Licence
5 Chapter 5: Biology & Control of Structural Insects and Other Arthropods
5.1 Insect & Arthropod Biology: Anatomy, Orders & Metamorphosis 5.2 Cockroach Identification, Biology & Control 5.3 Structural Ants Biology, Nesting & Baiting 5.4 Bed Bug Biology, Inspection & Integrated Management 5.5 Stored Product Pests & Flea Management 5.6 Filth & Nuisance Flies in Structures 5.7 Fabric Pests, Silverfish & Occasional Invaders 5.8 Stinging Insects, Spiders, Ticks & Mites
6 Chapter 6: Wood-Destroying Organisms & the Termite Class Boundary
6.1 Termite Biology, Castes & Detection 6.2 Termite Control Techniques & Chemical Barriers 6.3 Powderpost Beetles, Carpenter Ants & Wood Decay
7 Chapter 7: Application Equipment, Calibration & Techniques
7.1 Compressed Air Sprayers & Structural Equipment 7.2 Nozzle Selection, Spray Patterns & Droplet Dynamics 7.3 Equipment Calibration & Delivery Rates 7.4 Specialized Tools: Dusters, Foggers & Bait Applicators
8 Chapter 8: Structural Treatment Calculations & Math
8.1 Structural Area, Perimeter & Volume Calculations 8.2 Liquid Dilution & Tank Mixing Calculations 8.3 Active Ingredient (a.i.) & Finished Spray Rate Math 8.4 Space Treatment, Fogging & Bait Density Calculations
3.2 Structural Inspection Methodology, Sanitation & Exclusion
Key Takeaways Explain This Topic AI
A structural inspection is systematic and directional — exterior to interior, ground level upward — so that no zone is skipped because the complaint pointed elsewhere.
Conditions conducive to infestation (moisture, harbourage, food, entry) are the real findings; the pests are only the symptom.
Exclusion materials must resist gnawing: copper mesh, stainless wool, sheet metal, hardware cloth and mortar hold, while expanding foam and steel wool alone do not.
A house mouse passes a gap of about 6 mm and a rat about 13 mm, so exclusion is judged with a measuring tool, not by eye.
Every inspection ends in a written list of client-side corrections with owners and deadlines, because sanitation and exclusion failures the client controls will otherwise reverse your treatment.
Last updated: September 2026
3.2 Structural Inspection Methodology, Sanitation & Exclusion
Note
The single most common professional failure is treating where the complaint was made rather than where the pest lives. A disciplined, directional inspection is the cure, and it is what separates a technician from an applicator.
Tools Before Technique
A structural inspection cannot be done with a flashlight alone. Carry:
A bright focused torch and a mirror on a telescoping handle for behind and beneath equipment.
A moisture meter — moisture is the master variable for carpenter ants, wood decay fungi, silverfish, sowbugs, springtails and drain flies.
A screwdriver or awl for probing suspect wood; sound wood resists, decayed wood yields.
Coin or gap gauges to measure openings objectively against the 6 mm and 13 mm rules.
Collection vials and a hand lens so identification is not done from memory.
A camera — a dated photograph of a gap under a service door persuades a building manager far better than a sentence does.
The Directional Sweep
Work the same order every time so that fatigue and distraction cannot make you skip a zone.
Zone 1 — Site and exterior grounds. Vegetation touching the wall, mulch depth against the foundation, standing water, downspout discharge, waste storage location and container condition, pallet and material storage against the building, bird nesting and roosting evidence, rodent burrows and runways.
Zone 2 — The building envelope. Foundation cracks, weep holes, air conditioner line penetrations, gas and electrical entries, dryer and bathroom vents, soffit and fascia gaps, roof-line junctions, window and door frames, overhead and personnel door thresholds, loading dock levellers and seals.
Zone 3 — Entry and receiving. Where goods come in is where pests come in. Inspect incoming pallets, cardboard, produce and dry goods; look at how long material sits on the dock and whether it is stored on the floor.
Zone 4 — Interior harbourage. Beneath and behind cooking equipment, motor housings and compressor compartments (warm, dark, undisturbed — the German cockroach's ideal), false ceilings, wall voids, elevator pits, utility chases, cable and pipe runs, storage rooms, staff lockers, cardboard accumulations.
Zone 5 — Moisture and mechanical. Leaking taps and traps, condensate lines, floor drains and their biofilm, sump pits, dishwasher and ice machine drains, crawlspaces, roof leaks, humidity in basements. Follow water and you will find pests.
Tip
Inspect during the pest's active period where possible. A German cockroach inspection at 10 a.m. tells you far less than the same inspection thirty minutes after lights-out, and rodent runways are easiest to interpret with a torch held at a low, raking angle to the floor.
Sanitation: Removing What Sustains the Population
Sanitation is not tidiness. It is the systematic removal of food, water and harbourage.
- Condition found Correction Pest it starves
- Grease accumulation beneath cooking line Deep clean including equipment removal German cockroach
Cardboard stored on the floor Sealed plastic bins on racking, 45 cm from walls Cockroaches, stored product pests, rodents
Open dumpster within a few metres of a door Move, close, clean, drain to sewer not to grade Filth flies, rats, wasps
- Dry goods without stock rotation First-in first-out with dated stock Stored product beetles and moths
- Standing water in floor drain trough Repair drainage, scrub biofilm Drain flies, phorid flies
Roof or plumbing leak wetting framing Repair the leak, dry and replace wet wood Carpenter ants, decay fungi, sowbugs
The rule of storage — everything up off the floor, out from the wall, rotated and inspectable — solves more warehouse pest problems than any product.
Exclusion: Materials and Tolerances
Exclusion is permanent control. It is also the part of the job most often done badly.
Gap tolerances. A house mouse can pass an opening of roughly 6 mm (about the diameter of a pencil); a rat needs roughly 13 mm . Young rodents pass smaller gaps than adults. Measure — the eye consistently underestimates a gap seen from standing height.
Materials that hold:
- Copper mesh or stainless steel wool packed into voids, then sealed
- Sheet metal or aluminium flashing over chewed timber edges
- Hardware cloth (galvanised mesh) over vents and weep openings, sized to exclude the target
- Mortar, concrete patch or masonry cement for foundation defects
- Brush or rubber door sweeps set with no visible daylight at the threshold, plus astragals on double doors
Materials that fail:
Expanding polyurethane foam used alone. Rodents chew straight through it. Foam is a sealant over a rodent-proof core, never the core.
Ordinary steel wool. It rusts and disintegrates; copper or stainless equivalents do not.
Duct tape, plastic sheet, wood filler and caulk alone in any rodent-pressure location.
Sequence matters. Never seal a structure before you know the pest is out. Excluding rodents into a wall void produces a decomposition and blow fly complaint a week later; excluding bats during the maternity period traps flightless young inside.
Turning Findings Into a Corrective Action List
An inspection that ends in your notebook has achieved nothing. Give the client a written list, and make it actionable:
What the defect is, in plain language.
Where it is, precisely enough for a maintenance worker to find it.
Why it matters — which pest it admits or sustains.
Who owns the fix — you, the client's maintenance staff, or a trade.
By when , with the correction verified at the next visit.
Items you cannot lawfully or practically perform yourself — replacing decayed sill plate, re-grading soil away from a foundation, repairing a roof — still belong on the list. Documenting them protects the client, makes the programme work, and protects you if the infestation recurs because the correction was never made.