Study guide
8.2 Liquid Dilution & Tank Mixing Calculations
Ontario Pesticide Structural Exterminator Module Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Ontario Pesticide Legislation, Regulatory Framework & Licensing
1.1 Regulatory Authorities & Statutory Framework 1.2 Structural Exterminator Licensing & Qualifications 1.3 Warning Signs, Storage & Transportation Rules 1.4 Record-Keeping & Controlled Substances 1.5 Pesticide Classes, Purchase Rules & the Cosmetic Pesticides Ban
2 Chapter 2: Pesticide Safety, Toxicology & Environmental Protection
2.1 Pesticide Classification, Labels & Formulations 2.2 Toxicology, Exposure Routes & Personal Protective Equipment 2.3 Environmental Fate, Spills Action Centre & Emergency Response 2.4 Insecticide Modes of Action & Resistance Management
3 Chapter 3: Structural IPM, Inspection & Site Management
3.1 Structural IPM Principles, Monitoring & Action Thresholds 3.2 Structural Inspection Methodology, Sanitation & Exclusion 3.3 Sensitive Sites, Occupant Notification & Re-Entry
4 Chapter 4: Vertebrate Pests of Structures — Rodents, Birds & Wildlife
4.1 Norway Rats, Roof Rats & House Mice Biology 4.2 Rodent Inspection, Exclusion & Non-Chemical Control 4.3 Rodenticides, Baiting Strategies & Secondary Poisoning Risks 4.4 Pest Birds: Pigeons, Starlings & House Sparrows 4.5 Bats, Wildlife & the Limits of a Pesticide Licence
5 Chapter 5: Biology & Control of Structural Insects and Other Arthropods
5.1 Insect & Arthropod Biology: Anatomy, Orders & Metamorphosis 5.2 Cockroach Identification, Biology & Control 5.3 Structural Ants Biology, Nesting & Baiting 5.4 Bed Bug Biology, Inspection & Integrated Management 5.5 Stored Product Pests & Flea Management 5.6 Filth & Nuisance Flies in Structures 5.7 Fabric Pests, Silverfish & Occasional Invaders 5.8 Stinging Insects, Spiders, Ticks & Mites
6 Chapter 6: Wood-Destroying Organisms & the Termite Class Boundary
6.1 Termite Biology, Castes & Detection 6.2 Termite Control Techniques & Chemical Barriers 6.3 Powderpost Beetles, Carpenter Ants & Wood Decay
7 Chapter 7: Application Equipment, Calibration & Techniques
7.1 Compressed Air Sprayers & Structural Equipment 7.2 Nozzle Selection, Spray Patterns & Droplet Dynamics 7.3 Equipment Calibration & Delivery Rates 7.4 Specialized Tools: Dusters, Foggers & Bait Applicators
8 Chapter 8: Structural Treatment Calculations & Math
8.1 Structural Area, Perimeter & Volume Calculations 8.2 Liquid Dilution & Tank Mixing Calculations 8.3 Active Ingredient (a.i.) & Finished Spray Rate Math 8.4 Space Treatment, Fogging & Bait Density Calculations
8.2 Liquid Dilution & Tank Mixing Calculations
Key Takeaways Explain This Topic AI
The universal dilution formula C₁ × V₁ = C₂ × V₂ governs all tank mixing: C₁ is concentrate strength %, V₁ is volume of concentrate required, C₂ is target finished spray %, and V₂ is total finished batch volume.
To solve for required concentrate volume, isolate V₁: V₁ = (C₂ × V₂) / C₁; water volume equals total finished volume minus concentrate volume (V_water = V₂ - V₁).
Wettable powder (dry product) tank math requires calculating grams of commercial product: Mass (g) = (Target % × Batch Volume L × 10) / Guarantee Fraction.
Standard concentration equivalencies must be internalized: 1% = 10,000 parts per million (ppm) = 10 grams per litre (g/L); 0.05% = 500 ppm = 0.5 g/L.
Chemical formulations must be added to spray tanks strictly following the W-A-L-E-S protocol (Water half full, Agitate, Liquids/flowables/dry powders, Emulsifiable concentrates, Surfactants/top to mark) to prevent chemical antagonism, flocs, and precipitation.
Last updated: September 2026
8.2 Liquid Dilution & Tank Mixing Calculations
Note
Chemical Formulation Dilution Standards : Licensed structural exterminators rarely apply commercial insecticides in their manufactured concentrate form. Technical concentrates—such as Emulsifiable Concentrates (EC), Suspension Concentrates (SC), and Microencapsulated slurries (CS)—contain high percentages of active ingredient (e.g., 10% to 50%) designed to be diluted with water into finished spray emulsions or suspensions (e.g., 0.05% to 0.5%). Achieving the exact active ingredient concentration mandated by the PMRA label is a legal duty under Ontario Regulation 63/09. Over-concentrating finished spray wastes expensive chemical, increases toxic residues, and damages client surfaces; under-concentrating leads to pest resurgence and promotes pesticide resistance.
The Core Dilution Formula: C 1 × V 1 = C 2 × V 2 C_1 \times V_1 = C_2 \times V_2 C 1 × V 1 = C 2 × V 2
The mathematical relationship governing any solution or emulsion dilution is based on the conservation of active ingredient mass. The mass of pure chemical in the measured concentrate must exactly equal the mass of pure chemical distributed throughout the final diluted batch: C 1 × V 1 = C 2 × V 2 \mathbf{C_1 \times V_1 = C_2 \times V_2} C 1 × V 1 = C 2 × V 2
Where:
C 1 C_1 C 1 = Concentration of the commercial concentrate formulation (as a percentage, %, or g/L, as stated on the label guarantee).
V 1 V_1 V 1 = Volume of commercial concentrate required to be measured into the tank.
C 2 C_2 C 2 = Desired target concentration of the finished spray mixture (as a percentage, %, or g/L, as mandated by the label directions).
V 2 V_2 V 2 = Total target volume of finished spray mixture to be prepared.
Solving for the Required Concentrate Volume ( V 1 V_1 V 1 )
To determine the exact quantity of commercial concentrate formulation to add to your spray tank, rearrange the formula to solve for V 1 V_1 V 1 : V 1 = C 2 × V 2 C 1 \mathbf{V_1 = \frac{C_2 \times V_2}{C_1}} V 1 = C 1 C 2 × V 2
Calculating Carrier Water Volume
Once V 1 V_1 V 1 is calculated, the volume of carrier water required to achieve total batch volume V 2 V_2 V 2 is: V water = V 2 − V 1 \mathbf{V_{\text{water}} = V_2 - V_1} V water = V 2 − V 1
(Note: When V 1 V_1 V 1 represents a tiny volume, such as 15 mL in a 10-litre batch, exterminators typically fill the tank to the final 10 L calibration mark with water. However, when large volumes of concentrate are required, deducting V 1 V_1 V 1 from V 2 V_2 V 2 is mathematically and physically essential to prevent over-filling and dilution errors.) +-----------------------------------------------------------------------------------+
- | The Dilution Principle Visualized |
- +-----------------------------------------------------------------------------------+
- | |
- | [ V₁: Small Volume ] [ V₂: Large Finished Batch ] |
- | [ C₁: High Strength ] [ C₂: Target Weak Strength ] |
- | |
- | Concentrate (e.g. 25%) + Carrier Water = Finished Emulsion (e.g. 0.5%) |
- | (200 mL) (9.8 L) (10.0 L) |
- | |
- | Total Mass of Active Ingredient Remains Constant |
- +-----------------------------------------------------------------------------------+
- Step-by-Step Worked Liquid Mixing Examples
- Example A: Commercial Permethrin Emulsion for Perimeter Ants
Scenario : An exterminator needs to prepare 10 litres of a 0.5% finished permethrin spray emulsion to treat a commercial foundation band. The service truck carries a commercial permethrin Emulsifiable Concentrate with a 25% guarantee ( C 1 = 25 % C_1 = 25\% C 1 = 25% , C 2 = 0.5 % C_2 = 0.5\% C 2 = 0.5% , V 2 = 10 L V_2 = 10\text{ L} V 2 = 10 L ).
Identify Variables :
- C 1 = 25 % C_1 = 25\% C 1 = 25%
- V 1 = Unknown V_1 = \text{Unknown} V 1 = Unknown
- C 2 = 0.5 % C_2 = 0.5\% C 2 = 0.5%
- V 2 = 10 L V_2 = 10\text{ L} V 2 = 10 L
Apply the Solved Formula : V 1 = C 2 × V 2 C 1 = 0.5 % × 10 L 25 % = 5 25 = 0.20 Litres V_1 = \frac{C_2 \times V_2}{C_1} = \frac{0.5\% \times 10\text{ L}}{25\%} = \frac{5}{25} = 0.20\text{ Litres} V 1 = C 1 C 2 × V 2 = 25% 0.5% × 10 L = 25 5 = 0.20 Litres
Convert to Millilitres : 0.20 L × 1 , 000 mL/L = 200 mL of commercial concentrate 0.20\text{ L} \times 1,000\text{ mL/L} = 200\text{ mL of commercial concentrate} 0.20 L × 1 , 000 mL/L = 200 mL of commercial concentrate
Calculate Water Volume : V water = V 2 − V 1 = 10.0 L − 0.2 L = 9.8 Litres of water V_{\text{water}} = V_2 - V_1 = 10.0\text{ L} - 0.2\text{ L} = 9.8\text{ Litres of water} V water = V 2 − V 1 = 10.0 L − 0.2 L = 9.8 Litres of water
Example B: Preparing a 3.8 L (1 Gallon) Hand Sprayer Batch
Scenario : A technician is preparing a standard 3.8-litre (1 US gallon) B&G compressed air sprayer for indoor German cockroach crack-and-crevice treatments. The target label concentration is 0.05% active ingredient , and the product is a 10% Suspension Concentrate (SC) .
Identify Variables :
- C 1 = 10 % C_1 = 10\% C 1 = 10%
- V 1 = Unknown V_1 = \text{Unknown} V 1 = Unknown
- C 2 = 0.05 % C_2 = 0.05\% C 2 = 0.05%
- V 2 = 3.8 L V_2 = 3.8\text{ L} V 2 = 3.8 L ( 3 , 800 mL 3,800\text{ mL} 3 , 800 mL )
Apply the Solved Formula : V 1 = C 2 × V 2 C 1 = 0.05 % × 3 , 800 mL 10 % = 190 10 = 19 mL V_1 = \frac{C_2 \times V_2}{C_1} = \frac{0.05\% \times 3,800\text{ mL}}{10\%} = \frac{190}{10} = 19\text{ mL} V 1 = C 1 C 2 × V 2 = 10% 0.05% × 3 , 800 mL = 10 190 = 19 mL
Mixing Execution :
The exterminator adds approximately 2 litres of clean water to the B&G tank.
Using a calibrated chemical graduated cylinder, the technician measures 19 mL of the 10% SC concentrate and pours it into the tank.
The technician adds clean water until the liquid level reaches the 3.8-litre line (adding 3 , 781 mL 3,781\text{ mL} 3 , 781 mL of water), seals the tank, and agitates thoroughly.
Wettable Powder (WP) & Dry Product Formulation Mixing
Wettable Powders (WP) and Water-Dispersible Granules (WDG) are dry formulations containing active ingredient toxicant bonded to micronized inert mineral clays (talc, kaolin, silica) along with wetting and dispersing agents. Because dry formulations are measured by weight (mass) rather than liquid volume, mixing math differs from liquid concentrates.
The Fundamental Mass Relationship
Water has a physical density where 1 litre of water has a mass of 1 kilogram (1,000 grams) . Therefore:
A 1% active ingredient concentration in water represents 10 grams of pure active ingredient per litre of water ( 1 % = 10 g/L 1\% = 10\text{ g/L} 1% = 10 g/L ).
A 0.1% active ingredient concentration represents 1.0 gram of pure active ingredient per litre of water ( 0.1 % = 1 g/L 0.1\% = 1\text{ g/L} 0.1% = 1 g/L ).
To determine the mass of dry formulated product (grams) needed to produce a specific target concentration in a batch volume of water: Mass of Pure a.i. Required (g) = Target Concentration (%) × 10 × Batch Volume (L) \text{Mass of Pure a.i. Required (g)} = \text{Target Concentration (\%)} \times 10 \times \text{Batch Volume (L)} Mass of Pure a.i. Required (g) = Target Concentration (%) × 10 × Batch Volume (L) Mass of Formulated Product (g) = Target Concentration (%) × 10 × Batch Volume (L) Product Guarantee Fraction \mathbf{\text{Mass of Formulated Product (g)} = \frac{\text{Target Concentration (\%)} \times 10 \times \text{Batch Volume (L)}}{\text{Product Guarantee Fraction}}} Mass of Formulated Product (g) = Product Guarantee Fraction Target Concentration (%) × 10 × Batch Volume (L)
Or expressed as a single standard formula: Mass (grams) = C 2 ( % ) × V 2 ( L ) × 1 , 000 Guarantee (%) \mathbf{\text{Mass (grams)} = \frac{C_2 (\%) \times V_2 (\text{L}) \times 1,000}{\text{Guarantee (\%)}}} Mass (grams) = Guarantee (%) C 2 ( % ) × V 2 ( L ) × 1 , 000
Worked Example: Wettable Powder Tank Mix
An exterminator needs to mix an 8-litre batch of finished residual insecticide spray at a target concentration of 0.25% active ingredient using a commercial 75% Wettable Powder (75 WP) .
Determine Pure a.i. Required : Pure a.i. = 0.25 × 10 g/L × 8 L = 2.5 g/L × 8 L = 20 grams of pure a.i. \text{Pure a.i.} = 0.25 \times 10\text{ g/L} \times 8\text{ L} = 2.5\text{ g/L} \times 8\text{ L} = 20\text{ grams of pure a.i.} Pure a.i. = 0.25 × 10 g/L × 8 L = 2.5 g/L × 8 L = 20 grams of pure a.i.
Account for Product Guarantee (75%) : Mass of 75 WP Product = 20 g 0.75 = 26.67 grams \text{Mass of 75 WP Product} = \frac{20\text{ g}}{0.75} = 26.67\text{ grams} Mass of 75 WP Product = 0.75 20 g = 26.67 grams (rounded to 26.7 g)
Alternative Single-Step Formula : Mass = 0.25 × 8 × 1 , 000 75 = 2 , 000 75 = 26.67 grams \text{Mass} = \frac{0.25 \times 8 \times 1,000}{75} = \frac{2,000}{75} = 26.67\text{ grams} Mass = 75 0.25 × 8 × 1 , 000 = 75 2 , 000 = 26.67 grams
Tip
The Pre-Slurry Mandate for Wettable Powders : Never pour dry wettable powders directly into a full spray tank. The dry clay particles will float on the water surface, form un-dispersed clumps ("doughballs"), and instantly clog inline filters and nozzle tips. Always pre-slurry : measure the dry powder into a small container, add a few hundred millilitres of water, stir vigorously into a smooth liquid slurry, and pour the slurry into the half-filled tank under agitation.
Concentration Units: Percentage, ppm, ppt, and g/L
Provincial examination questions frequently test the exterminator's ability to interconvert between different units of chemical concentration:
Unit of Concentration Abbreviation Mathematical Ratio Practical Metric Equivalent Common Structural Application
1.0 Percent 1.0% 1 / 100 1 / 100 1/100 10 , 000 ppm = 10 g/L 10,000\text{ ppm} = 10\text{ g/L} 10 , 000 ppm = 10 g/L High-strength termiticide pre-treatments
0.5 Percent 0.5% 5 / 1 , 000 5 / 1,000 5/1 , 000 5 , 000 ppm = 5 g/L 5,000\text{ ppm} = 5\text{ g/L} 5 , 000 ppm = 5 g/L Exterior barrier pyrethroid sprays
0.1 Percent 0.1% 1 / 1 , 000 1 / 1,000 1/1 , 000 1 , 000 ppm = 1 g/L 1,000\text{ ppm} = 1\text{ g/L} 1 , 000 ppm = 1 g/L Standard residual interior sprays
0.05 Percent 0.05% 5 / 10 , 000 5 / 10,000 5/10 , 000 500 ppm = 0.5 g/L 500\text{ ppm} = 0.5\text{ g/L} 500 ppm = 0.5 g/L Sensitive crack-and-crevice applications
0.01 Percent 0.01% 1 / 10 , 000 1 / 10,000 1/10 , 000 100 ppm = 0.1 g/L 100\text{ ppm} = 0.1\text{ g/L} 100 ppm = 0.1 g/L Ant baits, ultra-low residual pyrethroids
0.005 Percent 0.005% 5 / 100 , 000 5 / 100,000 5/100 , 000 50 ppm = 0.05 g/L 50\text{ ppm} = 0.05\text{ g/L} 50 ppm = 0.05 g/L Anticoagulant rodenticide bait blocks
Conversion Equations
From Percentage to ppm : ppm = Percentage (%) × 10 , 000 \text{ppm} = \text{Percentage (\%)} \times 10,000 ppm = Percentage (%) × 10 , 000
From ppm to Percentage : Percentage (%) = ppm 10 , 000 \text{Percentage (\%)} = \frac{\text{ppm}}{10,000} Percentage (%) = 10 , 000 ppm
From Percentage to g/L : g/L = Percentage (%) × 10 \text{g/L} = \text{Percentage (\%)} \times 10 g/L = Percentage (%) × 10
Quick Check : A water quality analysis shows a chemical concentration of 2 , 500 ppm 2,500\text{ ppm} 2 , 500 ppm . Expressed as a percentage: 2 , 500 / 10 , 000 = 0.25 % 2,500 / 10,000 = 0.25\% 2 , 500/10 , 000 = 0.25% .
Tank Mixing Sequence: The W-A-L-E-S Protocol
When blending multiple products in a spray tank (such as an insecticide with an Insect Growth Regulator [IGR] and a surfactant), adding chemicals in the wrong sequence causes immediate physical and chemical incompatibility . Severe physical incompatibility causes liquid emulsion breaking, curdling, greasy flocculation, gelatinous precipitate formation, and complete strainer blockage.
To ensure proper chemical dispersion and physical stability, structural exterminators must strictly follow the industry-standard W-A-L-E-S mixing sequence : +-----------------------------------------------------------------------------------+
- | The W-A-L-E-S Mixing Protocol |
- +-----------------------------------------------------------------------------------+
- | |
- | [ W ] ---> WATER: Fill the spray tank 1/3 to 1/2 full with clean carrier water |
- | | |
- | v |
- | [ A ] ---> AGITATE: Begin mechanical, hydraulic, or manual tank agitation |
- | | |
- | v |
- | [ L ] ---> LIQUIDS & FLOWABLES: Add dry powders, wettable powders (pre-slurried), |
- | water-dispersible granules (WDG), and suspension concentrates (SC) |
- | | |
- | v |
- | [ E ] ---> EMULSIFIABLE CONCENTRATES: Add petroleum-based concentrates (EC) |
- | and microencapsulated solutions (CS) |
- | | |
- | v |
- | [ S ] ---> SURFACTANTS & FILL: Add adjuvants, drift retardants, and water |
- | conditioners; add remaining water to reach final target volume |
- +-----------------------------------------------------------------------------------+
- Detailed Breakdown of the Protocol Steps
W - Water First : Always begin with clean carrier water filling one-third to one-half of the tank. NEVER pour chemical concentrate into an dry, empty spray tank . Pouring concentrate directly into an empty tank coats the bottom sump and siphon tube with pure chemical, causing severe foaming, uneven dilution, and intense gasket corrosion.
A - Agitate : Agitation must be initiated before adding any chemical products. Agitation keeps carrier water moving to immediately disperse incoming formulations.
L - Liquids, Flowables & Dry Formulations : Add solid and suspension formulations first. This includes pre-slurried Wettable Powders (WP), Water-Soluble Bags (WSB), Water-Dispersible Granules (WDG), and liquid Suspension Concentrates (SC). These products require maximum water volume and agitation to wet their inert clay carriers and disperse evenly without coagulating.
E - Emulsifiable Concentrates : Add oil-in-water Emulsifiable Concentrates (EC) and microencapsulated formulations (CS) next. The solvent carriers and emulsifiers in ECs instantly disperse throughout the water matrix once dry particles are already wetted.
S - Surfactants & Fill to Volume : Add liquid surfactants, tank adjuvants, synergists (like piperonyl butoxide [PBO]), and foaming agents last. Surfactants lower surface tension and cause violent bubbling if added earlier. Finally, add clean water to bring the tank liquid level exactly to the final calibrated volume mark, maintaining agitation throughout.
Critical Exam Traps
Warning
Common Examination Pitfalls for Section 8.2 :
Trap: Inverting the Dilution Formula : Candidates frequently calculate V 1 = C 1 × V 2 C 2 V_1 = \frac{C_1 \times V_2}{C_2} V 1 = C 2 C 1 × V 2 . If you multiply by the concentrate percentage and divide by the target percentage, your answer will be astronomical (e.g., thousands of litres of concentrate needed for a 10 L batch). Always sanity-check your result: V 1 V_1 V 1 must ALWAYS be smaller than V 2 V_2 V 2 .
Trap: Unit Mismatches in C₁V₁ = C₂V₂ : If V 2 V_2 V 2 is in litres, your calculated V 1 V_1 V 1 will be in litres. If the question asks for millilitres, you must multiply by 1,000. For example, 0.095 L = 95 mL 0.095\text{ L} = 95\text{ mL} 0.095 L = 95 mL .
Trap: Direct Addition of Wettable Powders : Exam questions often ask how to introduce dry wettable powders into a B&G sprayer. The correct procedure is always to pre-slurry with a small volume of water in an external container , never dumping dry powder directly into the tank.
Trap: ppm Conversions : Remember that 1 % = 10 , 000 ppm 1\% = 10,000\text{ ppm} 1% = 10 , 000 ppm . A common exam trick is asking for the percentage of a 500 ppm 500\text{ ppm} 500 ppm solution; candidates often pick 0.5 % 0.5\% 0.5% instead of the correct 0.05 % 0.05\% 0.05% .