Study guide
3.1 NAPRA Non-Sterile Standards, Facilities & Equipment Requirements
PEBC Pharmacy Technician Qualifying Examination Part I MCQ
Track your progress as you read
Finished sections get a check mark.
1 Introduction: PEBC Technician Qualifying Exam Part I Overview
0.1 Exam Facts, 2026 Blueprint & Test-Taking Strategy
2 Chapter 1: Prescription Intake, Adjudication & Processing
1.1 Prescription Legal Validity, Essential Elements & Order Intake 1.2 Patient Profile Setup, Drug Insurance & Third-Party Adjudication 1.3 Order Clarification, Refill Authorizations & Prescription Transfers
3 Chapter 2: Pharmaceutical Calculations for Pharmacy Practice
2.1 Metric Conversions, Ratio Strengths & Percentage Concentrations 2.2 Dosing Regimens, Days Supply & Pediatric/Geriatric Calculations 2.3 Alligation Alternate & Concentration Adjustments 2.4 IV Flow Rates, Infusion Times & Electrolyte Solutions
4 Chapter 3: Non-Sterile Compounding & NAPRA Standards
3.1 NAPRA Non-Sterile Standards, Facilities & Equipment Requirements 3.2 Master Formulation Records, Compounding Procedures & Beyond-Use Dates 3.3 Hazardous Non-Sterile Handling & Quality Assurance
5 Chapter 4: Sterile Compounding & Aseptic Technique
4.1 Cleanroom Engineering Controls, ISO Classifications & Airflow Workstations 4.2 Aseptic Technique, Hand Hygiene & Garbing Protocols 4.3 Parenteral Admixtures, Reconstitution & Sterile Beyond-Use Dates
6 Chapter 5: Product Release, Verification & Dispensing Systems
5.1 Technical Verification & Independent Double Checks 5.2 Final Product Inspection, Packaging & Auxiliary Labelling 5.3 Automated Dispensing Cabinets, Unit-Dose Systems & Technology 5.4 Patient Handover, Identity Verification & Technical Device Demonstrations
7 Chapter 6: Inventory Control, Cold Chain & Drug Distribution
6.1 Inventory Management, Ordering & Stock Rotation (FIFO) 6.2 Cold Chain Management, Temperature Monitoring & Excursion Protocols 6.3 Drug Recalls, Quarantine Protocols & Safe Disposal
8 Chapter 7: Patient Care & Clinical Support for Pharmacy Technicians
7.1 Patient Data Collection & Best Possible Medication History (BPMH) 7.2 Screening for Drug Therapy Problems & Pharmacist Referral Triggers 7.3 Compliance Packaging, Adherence Aids & Patient Support 7.4 Physical Measurements, Point-of-Care Testing & Supporting Medication Administration
9 Chapter 8: Canadian Pharmacy Legislation & Regulatory Framework
8.1 Canadian Federal Legislation: Food and Drugs Act & CDSA 8.2 Controlled Substances: The Controlled Substances Regulations, Narcotics, Controlled Drugs, Targeted Substances & Cannabis 8.3 Provincial Colleges of Pharmacy, Technician Scope of Practice & Privacy Laws
10 Chapter 9: Patient Safety, Continuous Quality Improvement & Ethics
9.1 Medication Incident Reporting, Root Cause Analysis & Continuous Quality Improvement 9.2 Error Prevention Strategies, High-Alert Medications & LASA Safeguards 9.3 Code of Ethics, Confidentiality & Professional Boundaries 9.4 Equity, Diversity, Inclusion & Cultural Safety in Pharmacy Practice
11 Chapter 10: Pharmacology Foundations, Communication & Public Health
10.1 Key Canadian Drug Classes, Common Indications & Canadian Brand/Generic Names 10.2 Evidence-Informed Decision Making & Authoritative Drug Information References 10.3 Interprofessional Collaboration, Effective Communication & Documentation Standards 10.4 Public Health Promotion, Harm Reduction & Community Wellness Programs
3.1 NAPRA Non-Sterile Standards, Facilities & Equipment Requirements
Key Takeaways Explain This Topic AI
NAPRA's non-sterile compounding standards sort preparations into Levels A, B and C using a documented risk assessment that must be reviewed at least every 12 months.
Level A covers simple and moderate compounds in a separate designated area; Level B covers complex compounds in a separate, well-ventilated room, with a ventilated containment device when needed.
Level C hazardous compounding needs a dedicated room at negative pressure (at least 2.5 Pa), at least 12 air changes per hour, HEPA-filtered external exhaust, and a C-PEC.
Level C rooms and their containment primary engineering controls must be certified at least every 6 months and after installation, repair or relocation.
A Class A torsion balance has a 6 mg sensitivity requirement, so its minimum weighable quantity at 5% error is 120 mg; smaller amounts need an aliquot.
Last updated: September 2026
NAPRA Non-Sterile Standards, Facilities & Equipment Requirements
Core Principle: Non-sterile compounding is an essential scope of practice for Canadian pharmacy technicians. Under the National Association of Pharmacy Regulatory Authorities (NAPRA) Model Standards for Pharmacy Compounding of Non-Sterile Preparations , compounding facilities must implement rigorous physical, environmental, and equipment standards to ensure product quality, prevent cross-contamination, and protect healthcare personnel.
1. NAPRA Regulatory Framework & Risk Classification
Compounding pharmacies across Canadian provinces and territories are regulated by their respective provincial pharmacy colleges (e.g., OCP, ACP, CPBC) under standards modeled after NAPRA. Before any compounding occurs, the pharmacy must conduct a formal risk assessment of the active pharmaceutical ingredients (APIs), excipients, dosage forms, and compounding processes. NAPRA classifies non-sterile compounding operations into three distinct environmental levels:
Level What It Covers (NAPRA) Facility & Containment Requirements
Level A Simple and moderate compounds as defined in USP <795>: a preparation that follows a USP monograph or a published formula with stability data, or one that needs special calculations or procedures (such as calibrating suppository mould cavities) or lacks stability data for that exact formula. (Mixing or reconstituting commercial products as the manufacturer directs is not considered compounding by Health Canada, but NAPRA encourages using the Level A area for it.) A separate space designated for compounding, clean and orderly, with good lighting and access to a sink with hot and cold running water.
Level B Complex compounds that need special training, environment, facilities or equipment (e.g., transdermal dosage forms, modified-release preparations, some inserts and suppositories for systemic effects), or small quantities of products that need ventilation (certain powders, aromatic products, allergens, or hormones), where the risk assessment shows Level C is not needed. A separate, well-ventilated room with a larger workspace, few interruptions and greater protection from cross-contamination. A ventilated containment device is required for certain powders, aromatic products or hazardous products.
Level C Hazardous preparations whose risk assessment calls for full containment (e.g., NIOSH-listed antineoplastics or reproductive hazards handled in quantity or as powders). A physically separated room dedicated to hazardous compounding, under negative pressure (at least 2.5 Pa, about 0.01 inch water column) relative to surrounding areas, with at least 12 air changes per hour (ACPH) , exhaust vented outside through HEPA filtration, a containment primary engineering control (C-PEC), an eyewash station, and water sources and drains at least 1 metre from the C-PEC.
Risk assessment, not the drug name alone: NAPRA's guidance notes that a simple preparation containing a NIOSH-listed drug (e.g., clonazepam or carbamazepine) may sometimes be made under Level A requirements, if the quantity is small and the risk is mitigated and documented. The assessment weighs the ingredient's hazard, physical form, quantity, frequency and exposure risk, and it must be reviewed at least every 12 months.
- 2. Facility Design, Environmental Controls & Cleaning
- Spatial Workflow & Zoning
Compounding facilities must be designed with logical workflow zones that minimize cross-contamination and eliminate cluttered surfaces. The non-sterile compounding area must be dedicated solely to compounding activities and free from unrelated pharmacy inventory, general dispensing supplies, and foot traffic.
Surfaces & Finishes: Work counters, walls, floors, and ceilings must be smooth, seamless, impervious to water, and non-shedding. Surfaces must withstand repeated exposure to chemical disinfectants, detergents, and sanitizing agents without peeling, pitting, or cracking. Unsealed wood, porous tiles, and fibrous acoustic drop-ceilings are strictly prohibited.
Plumbing & Sinks: The compounding area must have access to a clean sink with hot and cold potable running water, soap, and single-use lint-free towels. Sinks must be positioned far enough from compounding work surfaces to prevent splashing. In a Level C room, NAPRA expects a handwashing sink and an eyewash station, with water sources and drains at least 1 metre from the C-PEC.
Environmental Controls: Ingredients and preparations must be stored at the temperatures their labels and NAPRA's storage guidance require, with temperatures monitored and recorded. Humidity should be controlled so hygroscopic powders do not absorb moisture, clump or degrade. NAPRA recommends keeping a Level C room at or below 20°C so staff can work comfortably in full PPE.
Routine Cleaning & Disinfection Protocols
Maintaining an immaculate compounding environment is mandatory under NAPRA standards:
Shift Cleaning: Clean all counter surfaces, balance pans, and surrounding work areas at the beginning and end of each operating shift.
Between Compounds: Thoroughly clean and decontaminate work surfaces between preparations of different formulations to prevent chemical cross-contamination.
Spill Management: Clean and decontaminate surfaces immediately following any chemical spill or particulate dispersal.
Sanitization Agents: Standard non-sterile surfaces require cleaning with a neutral germicidal detergent followed by disinfection with 70% isopropyl alcohol (IPA). Surfaces must be allowed to air dry completely to ensure adequate antimicrobial contact time.
Sanitation Logs: Every cleaning activity must be signed, dated, and archived in the facility maintenance log for provincial college inspection.
3. Compounding Equipment & Measuring Devices
Pharmacy technicians must select measuring and mixing equipment appropriate for the physical state, volume, weight, and chemical properties of the compounded ingredients.
Balances & Mass Measurement
Precision weighing is foundational to non-sterile compounding. Pharmacies utilize two primary types of balances:
A. Class A Prescription Torsion Balances
Mechanical balances utilizing an internal counterbalanced torsion wire mechanism. Class A balances have a standard Sensitivity Requirement (SR) of 6 mg , meaning a 6 mg load causes a detectable deflection of the balance pointer by one scale division.
Maximum Capacity: Typically 120 g.
Acceptable Margin of Error: Compounding standards limit weighing error to no more than 5% (0.05) .
Minimum Weighable Quantity (MWQ) Formula: MWQ = Sensitivity Requirement (SR) Acceptable Margin of Error = 6 mg 0.05 = 120 mg \text{MWQ} = \frac{\text{Sensitivity Requirement (SR)}}{\text{Acceptable Margin of Error}} = \frac{6\text{ mg}}{0.05} = 120\text{ mg} MWQ = Acceptable Margin of Error Sensitivity Requirement (SR) = 0.05 6 mg = 120 mg
Practical Rule: A technician must never weigh less than 120 mg directly on a Class A torsion balance. Attempting to weigh 20 mg directly with an SR of 6 mg would create a potential error of 6 / 20 = 30 % 6 / 20 = 30\% 6/20 = 30% , grossly violating compounding standards.
The Aliquot Method: When a prescription requires an amount of active drug smaller than 120 mg (e.g., 15 mg of dexamethasone), the technician must perform an aliquot calculation: weigh at least 120 mg of the active drug, blend it homogeneously with a calculated quantity of an inert diluent (e.g., lactose), and weigh an aliquot of the mixed powder that delivers the exact 15 mg dose.
B. Electronic Analytical Balances
Modern electronic top-loading and analytical balances utilize electromagnetic force restoration. Analytical balances offer readability down to 0.1 mg (0.0001 g) or 1 mg (0.001 g).
Draft Shields: Electronic balances measuring down to 0.1 mg must feature glass draft shields to eliminate air turbulence from room ventilation and breathing.
Leveling: The balance must be verified as level before each use by inspecting the integrated leveling bubble. If off-center, adjust the leveling feet.
Tare Function: Balances must be zeroed with the weighing boat or glassine paper in place before adding chemicals.
Weights & Calibration: Calibration must be verified daily using certified Class 1 or Class 2 reference weights. Reference weights must always be manipulated with plastic-tipped forceps—never bare fingers—to prevent skin oils from altering calibrated mass.
Volumetric Glassware & Measuring Liquids
Selecting the correct volumetric vessel prevents volumetric measurement errors:
Graduated Cylinders:
Cylindrical Graduates: Possess a uniform diameter throughout their height, providing high accuracy. Always preferred over conical graduates for compounding.
Conical Graduates: Have flared sides with a wide top and narrow base. They are easier to stir and clean, but their measurement precision decreases dramatically toward the top as the cross-sectional area expands.
"To Deliver" (TD) vs. "To Contain" (TC): Most graduated cylinders are calibrated TD ("To Deliver"), meaning they deliver the indicated volume, accounting for the microscopic thin film of liquid adhering to the inner glass wall. Volumetric flasks are typically calibrated TC ("To Contain").
The 20% Rule: To minimize percentage measurement error, never measure a liquid volume that represents less than 20% of the cylinder's total capacity. For example, never measure less than 20 mL in a 100 mL graduated cylinder; use a 25 mL or 10 mL cylinder instead.
Reading the Meniscus: Place the cylinder on a flat, level surface. Lower your eye level until your sightline is completely horizontal with the liquid surface. For clear or translucent liquids forming a concave meniscus, read the graduation mark level with the exact bottom of the curved liquid surface. Reading from above causes a parallax under-reading; reading from below causes a parallax over-reading.
Calibrated Pipettes & Syringes: For measuring micro-volumes (under 1 mL) or viscous liquids (e.g., glycerin, polysorbates), oral syringes or positive-displacement pipettes provide far greater volumetric accuracy than graduated cylinders.
Comminution & Blending Tools
Tool Type Material Characteristics Ideal Compounding Applications Key Precautions & Contraindications
Glass Mortar & Pestle Completely smooth, non-porous, non-absorptive, transparent. Preparing liquid solutions, suspensions, emulsions, and oily mixtures. Essential for chemicals that stain (e.g., iodine, gentian violet, coal tar). Not suitable for pulverizing hard crystalline drugs or dense tablets; glass can chip or fracture under high mechanical impact.
Wedgwood Mortar & Pestle Coarse, rough, unglazed ceramic interior with high mechanical friction. Pulverizing hard crystalline salts, coarse granules, and commercial tablets into fine, impalpable powders. Highly porous; absorbs liquid flavors, active drugs, and dyes. Difficult to clean; can harbor residues causing cross-contamination. Not for liquids.
Porcelain Mortar & Pestle Semi-glazed or finely ground unglazed ceramic; intermediate roughness. Blending fine powders, pulverizing soft aggregates, and general non-staining powder mixtures. Less abrasive than Wedgwood, but can still absorb persistent dyes or volatile aromatic oils over prolonged use.
Stainless Steel Spatula Flexible, durable, high tensile strength, smooth metallic finish. Incorporating powders into ointment and cream bases; general mixing on slabs. Contraindicated with iodine, potassium chlorate, tannins, and mercuric salts; metal undergoes oxidation and corrosive chemical degradation.
Hard Rubber / Plastic Spatula Flexible, chemically inert, non-reactive polymer. Handling oxidizing agents, iodine, heavy metal salts, and acid-reacting chemicals. Less rigid than steel; not suitable for heavy mechanical shearing of stiff, waxy ointment bases.
Ground Glass Ointment Slab Non-porous, perfectly flat, rigid, impervious glass tile. Mechanical levigation, spatulation of creams, gels, and ointments. Must be cleaned and decontaminated between preparations. Prevents liquid absorption common to paper pads.
Parchment Compounding Pads Disposable, non-absorbent coated paper bound in tear-off sheets. Routine incorporation of non-penetrating powders into ointment bases. Liquid levigating agents can seep between sheets or soften paper fibers, leading to paper tears during vigorous spatulation.
4. Maintenance, Verification & Calibration Logs
Under NAPRA standards, equipment reliability must be documented to guarantee reproducibility and regulatory auditability:
Daily Balance Verification: Perform zero-point verification and span checks using at least two standard weights (one low, one high) spanning the expected weighing range. Record findings in the balance log.
Certification Schedule: Balances and other instruments are maintained, calibrated or certified according to the manufacturer's specifications. For Level C, NAPRA requires the controlled room (C-SEC) and the C-PEC to be certified at least every 6 months , when new equipment is installed, after repairs that could change operating parameters, and during contamination investigations. Compounding areas are verified at least every 6 months.
Retention of Records: All calibration, maintenance, and facility cleaning logs must be preserved for the minimum period specified by the provincial college of pharmacy (typically between 2 and 10 years).