Study guide
2.3 Alligation Alternate & Concentration Adjustments
PEBC Pharmacy Technician Qualifying Examination Part I MCQ
Track your progress as you read
Finished sections get a check mark.
1 Introduction: PEBC Technician Qualifying Exam Part I Overview
0.1 Exam Facts, 2026 Blueprint & Test-Taking Strategy
2 Chapter 1: Prescription Intake, Adjudication & Processing
1.1 Prescription Legal Validity, Essential Elements & Order Intake 1.2 Patient Profile Setup, Drug Insurance & Third-Party Adjudication 1.3 Order Clarification, Refill Authorizations & Prescription Transfers
3 Chapter 2: Pharmaceutical Calculations for Pharmacy Practice
2.1 Metric Conversions, Ratio Strengths & Percentage Concentrations 2.2 Dosing Regimens, Days Supply & Pediatric/Geriatric Calculations 2.3 Alligation Alternate & Concentration Adjustments 2.4 IV Flow Rates, Infusion Times & Electrolyte Solutions
4 Chapter 3: Non-Sterile Compounding & NAPRA Standards
3.1 NAPRA Non-Sterile Standards, Facilities & Equipment Requirements 3.2 Master Formulation Records, Compounding Procedures & Beyond-Use Dates 3.3 Hazardous Non-Sterile Handling & Quality Assurance
5 Chapter 4: Sterile Compounding & Aseptic Technique
4.1 Cleanroom Engineering Controls, ISO Classifications & Airflow Workstations 4.2 Aseptic Technique, Hand Hygiene & Garbing Protocols 4.3 Parenteral Admixtures, Reconstitution & Sterile Beyond-Use Dates
6 Chapter 5: Product Release, Verification & Dispensing Systems
5.1 Technical Verification & Independent Double Checks 5.2 Final Product Inspection, Packaging & Auxiliary Labelling 5.3 Automated Dispensing Cabinets, Unit-Dose Systems & Technology 5.4 Patient Handover, Identity Verification & Technical Device Demonstrations
7 Chapter 6: Inventory Control, Cold Chain & Drug Distribution
6.1 Inventory Management, Ordering & Stock Rotation (FIFO) 6.2 Cold Chain Management, Temperature Monitoring & Excursion Protocols 6.3 Drug Recalls, Quarantine Protocols & Safe Disposal
8 Chapter 7: Patient Care & Clinical Support for Pharmacy Technicians
7.1 Patient Data Collection & Best Possible Medication History (BPMH) 7.2 Screening for Drug Therapy Problems & Pharmacist Referral Triggers 7.3 Compliance Packaging, Adherence Aids & Patient Support 7.4 Physical Measurements, Point-of-Care Testing & Supporting Medication Administration
9 Chapter 8: Canadian Pharmacy Legislation & Regulatory Framework
8.1 Canadian Federal Legislation: Food and Drugs Act & CDSA 8.2 Controlled Substances: The Controlled Substances Regulations, Narcotics, Controlled Drugs, Targeted Substances & Cannabis 8.3 Provincial Colleges of Pharmacy, Technician Scope of Practice & Privacy Laws
10 Chapter 9: Patient Safety, Continuous Quality Improvement & Ethics
9.1 Medication Incident Reporting, Root Cause Analysis & Continuous Quality Improvement 9.2 Error Prevention Strategies, High-Alert Medications & LASA Safeguards 9.3 Code of Ethics, Confidentiality & Professional Boundaries 9.4 Equity, Diversity, Inclusion & Cultural Safety in Pharmacy Practice
11 Chapter 10: Pharmacology Foundations, Communication & Public Health
10.1 Key Canadian Drug Classes, Common Indications & Canadian Brand/Generic Names 10.2 Evidence-Informed Decision Making & Authoritative Drug Information References 10.3 Interprofessional Collaboration, Effective Communication & Documentation Standards 10.4 Public Health Promotion, Harm Reduction & Community Wellness Programs
2.3 Alligation Alternate & Concentration Adjustments
Key Takeaways Explain This Topic AI
Alligation alternate is a rapid mathematical grid method used to calculate the proportional parts of two different strength preparations required to compound an intermediate desired strength.
In the alligation matrix, pure active drug powders, bulk chemicals, or concentrated liquids are assigned a strength of 100%, while pure diluents (purified water, petrolatum, simple syrup) are assigned 0%.
The single-stock dilution equation C1 * V1 = C2 * V2 (or Q1 * C1 = Q2 * C2) mathematically represents mass conservation when a single stock solution is diluted with an inert 0% solvent.
To convert alligation parts into measurable quantities, each component's part is divided by the total sum of parts and multiplied by the desired final weight or volume.
Compounding quality assurance requires technicians to verify that the final calculated weight or volume and active drug mass precisely equal the prescribed order parameters.
Last updated: September 2026
Alligation Alternate & Concentration Adjustments
Non-sterile compounding in Canadian community and hospital pharmacies regularly requires technicians to prepare customized drug concentrations that are not commercially available from pharmaceutical manufacturers. To achieve the exact prescribed strength, technicians must mix products of higher and lower strengths, fortify commercial bases with pure active drug powders, or dilute stock concentrates with inert bases.
Mathematical Principles of Concentration Mixing
All concentration calculations are governed by the Law of Conservation of Mass : the total mass of active drug in the final compounded product must exactly equal the sum of the active drug masses contributed by each individual starting ingredient.
Alligation Medial vs. Alligation Alternate
Alligation Medial: Used to find the resulting average concentration when known quantities of two or more preparations of differing strengths are blended together.
Alligation Alternate: Used to determine the relative proportions (parts) of two starting preparations of differing strengths needed to compound a target intermediate strength.
Setting Up the Alligation Alternate Grid (Tic-Tac-Toe Matrix)
The alligation grid simplifies proportional calculations without requiring complex algebraic systems of equations.
- The Grid Layout Higher Strength (H) |Desired - Lower| = Parts of Higher Strength
- \ /
- Desired (D)
- / \
- Lower Strength (L) |Higher - Desired| = Parts of Lower Strength
- ------------------------------------------------
- TOTAL PARTS = Sum of Parts
- Step-by-Step Rules for Constructing the Matrix
Verify Feasibility: The desired concentration ( D D D ) must lie between the higher concentration ( H H H ) and the lower concentration ( L L L ). You cannot prepare a 15% cream from 5% and 10% ingredients.
Place Strengths in Column 1:
Place the Higher Concentration ( H H H ) in the top left corner.
Place the Lower Concentration ( L L L ) in the bottom left corner.
Place the Desired Strength in the Center:
Place the Desired Concentration ( D D D ) in the center box.
Cross-Subtract Diagonally:
Subtract the lower concentration from the desired concentration: ∣ D − L ∣ |D - L| ∣ D − L ∣ . Write this number in the top right corner . This represents the Parts of Higher Strength needed.
Subtract the desired concentration from the higher concentration: ∣ H − D ∣ |H - D| ∣ H − D ∣ . Write this number in the bottom right corner . This represents the Parts of Lower Strength needed.
Sum the Total Parts:
Add the two values in the right-hand column: Total Parts = Parts of H + Parts of L \text{Total Parts} = \text{Parts of } H + \text{Parts of } L Total Parts = Parts of H + Parts of L .
Calculate Specific Amounts (Grams or Millilitres): Amount of Higher Component = Parts of H Total Parts × Desired Final Quantity \text{Amount of Higher Component} = \frac{\text{Parts of } H}{\text{Total Parts}} \times \text{Desired Final Quantity} Amount of Higher Component = Total Parts Parts of H × Desired Final Quantity Amount of Lower Component = Parts of L Total Parts × Desired Final Quantity \text{Amount of Lower Component} = \frac{\text{Parts of } L}{\text{Total Parts}} \times \text{Desired Final Quantity} Amount of Lower Component = Total Parts Parts of L × Desired Final Quantity
Working with 100% and 0% Ingredients
A frequent source of exam errors involves knowing what values to enter when an ingredient is pure active drug or an unmedicated base:
Pure active drug substances (pure chemical powders, crystals, pure USP liquids) contain 100% active medication: enter 100% in the grid.
Unmedicated bases, diluents, or vehicles (purified water, normal saline, white petrolatum, cold cream, simple syrup) contain no active medication: enter 0% in the grid.
Single-Stock Dilution: C 1 × V 1 = C 2 × V 2 C_1 \times V_1 = C_2 \times V_2 C 1 × V 1 = C 2 × V 2
When diluting a single concentrated stock solution with an inert solvent (water or normal saline), the alligation grid can be used, or you can apply the standard dilution equation: C 1 × V 1 = C 2 × V 2 or Q 1 × C 1 = Q 2 × C 2 C_1 \times V_1 = C_2 \times V_2 \quad \text{or} \quad Q_1 \times C_1 = Q_2 \times C_2 C 1 × V 1 = C 2 × V 2 or Q 1 × C 1 = Q 2 × C 2
Where:
- C 1 C_1 C 1 = Initial concentration of stock solution
- V 1 V_1 V 1 (or Q 1 Q_1 Q 1 ) = Initial volume (or quantity) of stock solution required
- C 2 C_2 C 2 = Target final concentration desired
V 2 V_2 V 2 (or Q 2 Q_2 Q 2 ) = Target final volume (or quantity) of compounded solution Volume of Stock Needed ( V 1 ) = C 2 × V 2 C 1 \text{Volume of Stock Needed } (V_1) = \frac{C_2 \times V_2}{C_1} Volume of Stock Needed ( V 1 ) = C 1 C 2 × V 2 Volume of Diluent to Add = V 2 − V 1 \text{Volume of Diluent to Add} = V_2 - V_1 Volume of Diluent to Add = V 2 − V 1
- Practical Compounding Scenarios
- Scenario 1: Compounding an Intermediate Alcohol Solution
Order: Prepare 500 mL of 70% v/v ethyl alcohol using 95% v/v ethyl alcohol and sterile water for irrigation (0%).
Method A: Dilution Equation C 1 × V 1 = C 2 × V 2 C_1 \times V_1 = C_2 \times V_2 C 1 × V 1 = C 2 × V 2 95 % × V 1 = 70 % × 500 mL 95\% \times V_1 = 70\% \times 500\text{ mL} 95% × V 1 = 70% × 500 mL V 1 = 70 × 500 95 = 368.42 mL V_1 = \frac{70 \times 500}{95} = 368.42\text{ mL} V 1 = 95 70 × 500 = 368.42 mL Volume of Water to Add = 500 mL − 368.42 mL = 131.58 mL \text{Volume of Water to Add} = 500\text{ mL} - 368.42\text{ mL} = 131.58\text{ mL} Volume of Water to Add = 500 mL − 368.42 mL = 131.58 mL
- Method B: Alligation Alternate Matrix
- H = 95 % H = 95\% H = 95% , D = 70 % D = 70\% D = 70% , L = 0 % L = 0\% L = 0%
- Parts of 95%: ∣ 70 − 0 ∣ = 70 parts |70 - 0| = 70\text{ parts} ∣70 − 0∣ = 70 parts
- Parts of 0%: ∣ 95 − 70 ∣ = 25 parts |95 - 70| = 25\text{ parts} ∣95 − 70∣ = 25 parts
- Total Parts: 70 + 25 = 95 parts 70 + 25 = 95\text{ parts} 70 + 25 = 95 parts
Volume of 95%: ( 70 / 95 ) × 500 mL = 368.42 mL (70 / 95) \times 500\text{ mL} = 368.42\text{ mL} ( 70/95 ) × 500 mL = 368.42 mL
Volume of Water: ( 25 / 95 ) × 500 mL = 131.58 mL (25 / 95) \times 500\text{ mL} = 131.58\text{ mL} ( 25/95 ) × 500 mL = 131.58 mL
Both methods yield identical results: 368.42 mL of 95% alcohol and 131.58 mL of sterile water.
Scenario 2: Blending Commercial Creams of Differing Strengths
Order: Prepare 120 g of 1.5% w/w hydrocortisone cream by blending commercial Hydrocortisone 2.5% cream and Hydrocortisone 0.5% cream.
Alligation Setup:
- Higher Strength ( H H H ): 2.5%
- Desired Strength ( D D D ): 1.5%
- Lower Strength ( L L L ): 0.5%
Calculations:
- Parts of 2.5%: ∣ 1.5 − 0.5 ∣ = 1.0 part |1.5 - 0.5| = 1.0\text{ part} ∣1.5 − 0.5∣ = 1.0 part
- Parts of 0.5%: ∣ 2.5 − 1.5 ∣ = 1.0 part |2.5 - 1.5| = 1.0\text{ part} ∣2.5 − 1.5∣ = 1.0 part
- Total Parts: 1.0 + 1.0 = 2.0 parts 1.0 + 1.0 = 2.0\text{ parts} 1.0 + 1.0 = 2.0 parts
Weight of 2.5% cream: ( 1.0 / 2.0 ) × 120 g = 60 g (1.0 / 2.0) \times 120\text{ g} = 60\text{ g} ( 1.0/2.0 ) × 120 g = 60 g
Weight of 0.5% cream: ( 1.0 / 2.0 ) × 120 g = 60 g (1.0 / 2.0) \times 120\text{ g} = 60\text{ g} ( 1.0/2.0 ) × 120 g = 60 g
Result: Blend exactly 60 g of 2.5% cream with 60 g of 0.5% cream.
Scenario 3: Fortifying an Ointment with 100% Active Drug Powder
Order: Prepare 90 g of 5% w/w salicylic acid ointment using pure salicylic acid powder USP (100%) and an existing stock of 2% w/w salicylic acid ointment.
Alligation Setup:
- Higher Strength ( H H H ): 100% (pure powder)
- Desired Strength ( D D D ): 5%
- Lower Strength ( L L L ): 2% (stock ointment)
Cross-Subtraction:
- Parts of 100% powder: ∣ 5 − 2 ∣ = 3 parts |5 - 2| = 3\text{ parts} ∣5 − 2∣ = 3 parts
- Parts of 2% ointment: ∣ 100 − 5 ∣ = 95 parts |100 - 5| = 95\text{ parts} ∣100 − 5∣ = 95 parts
- Total Parts: 3 + 95 = 98 parts 3 + 95 = 98\text{ parts} 3 + 95 = 98 parts
Component Quantities:
Weight of Salicylic Acid Powder: ( 3 / 98 ) × 90 g = 2.76 g (3 / 98) \times 90\text{ g} = 2.76\text{ g} ( 3/98 ) × 90 g = 2.76 g
Weight of 2% Ointment: ( 95 / 98 ) × 90 g = 87.24 g (95 / 98) \times 90\text{ g} = 87.24\text{ g} ( 95/98 ) × 90 g = 87.24 g
Quality Control Verification:
Total product weight: 2.76 g + 87.24 g = 90.00 g 2.76\text{ g} + 87.24\text{ g} = 90.00\text{ g} 2.76 g + 87.24 g = 90.00 g (Matches target).
Active drug mass in powder: 2.76 g 2.76\text{ g} 2.76 g .
Active drug mass in 2% ointment: 87.24 g × 0.02 = 1.745 g 87.24\text{ g} \times 0.02 = 1.745\text{ g} 87.24 g × 0.02 = 1.745 g .
Total active drug: 2.76 g + 1.745 g = 4.505 g 2.76\text{ g} + 1.745\text{ g} = 4.505\text{ g} 2.76 g + 1.745 g = 4.505 g .
Final concentration: ( 4.505 g / 90 g ) × 100 % = 5.005 % ≈ 5.0 % (4.505\text{ g} / 90\text{ g}) \times 100\% = 5.005\% \approx 5.0\% ( 4.505 g /90 g ) × 100% = 5.005% ≈ 5.0% . (Verified!).
Compounding Verification & Quality Assurance
NAPRA's Model Standards for Pharmacy Compounding of Non-sterile Preparations require calculations to be documented on the compounding record and verified before compounding begins:
Check Component Sums: Ensure component weights or volumes sum to the desired final quantity.
Check Decimal Consistency: Always maintain consistent units (% w/w with grams, % w/v with millilitres).
Independent Double-Check: Follow the pharmacy's policy for independent verification of calculations. Best practice is for a second regulated technician or pharmacist to recalculate alligation values before compounding begins.