Study guide

2.4 IV Flow Rates, Infusion Times & Electrolyte Solutions

PEBC Pharmacy Technician Qualifying Examination Part I MCQ

Track your progress as you read

Finished sections get a check mark.

1 Introduction: PEBC Technician Qualifying Exam Part I Overview

0.1 Exam Facts, 2026 Blueprint & Test-Taking Strategy

2 Chapter 1: Prescription Intake, Adjudication & Processing

1.1 Prescription Legal Validity, Essential Elements & Order Intake 1.2 Patient Profile Setup, Drug Insurance & Third-Party Adjudication 1.3 Order Clarification, Refill Authorizations & Prescription Transfers

3 Chapter 2: Pharmaceutical Calculations for Pharmacy Practice

2.1 Metric Conversions, Ratio Strengths & Percentage Concentrations 2.2 Dosing Regimens, Days Supply & Pediatric/Geriatric Calculations 2.3 Alligation Alternate & Concentration Adjustments 2.4 IV Flow Rates, Infusion Times & Electrolyte Solutions

4 Chapter 3: Non-Sterile Compounding & NAPRA Standards

3.1 NAPRA Non-Sterile Standards, Facilities & Equipment Requirements 3.2 Master Formulation Records, Compounding Procedures & Beyond-Use Dates 3.3 Hazardous Non-Sterile Handling & Quality Assurance

5 Chapter 4: Sterile Compounding & Aseptic Technique

4.1 Cleanroom Engineering Controls, ISO Classifications & Airflow Workstations 4.2 Aseptic Technique, Hand Hygiene & Garbing Protocols 4.3 Parenteral Admixtures, Reconstitution & Sterile Beyond-Use Dates

6 Chapter 5: Product Release, Verification & Dispensing Systems

5.1 Technical Verification & Independent Double Checks 5.2 Final Product Inspection, Packaging & Auxiliary Labelling 5.3 Automated Dispensing Cabinets, Unit-Dose Systems & Technology 5.4 Patient Handover, Identity Verification & Technical Device Demonstrations

7 Chapter 6: Inventory Control, Cold Chain & Drug Distribution

6.1 Inventory Management, Ordering & Stock Rotation (FIFO) 6.2 Cold Chain Management, Temperature Monitoring & Excursion Protocols 6.3 Drug Recalls, Quarantine Protocols & Safe Disposal

8 Chapter 7: Patient Care & Clinical Support for Pharmacy Technicians

7.1 Patient Data Collection & Best Possible Medication History (BPMH) 7.2 Screening for Drug Therapy Problems & Pharmacist Referral Triggers 7.3 Compliance Packaging, Adherence Aids & Patient Support 7.4 Physical Measurements, Point-of-Care Testing & Supporting Medication Administration

9 Chapter 8: Canadian Pharmacy Legislation & Regulatory Framework

8.1 Canadian Federal Legislation: Food and Drugs Act & CDSA 8.2 Controlled Substances: The Controlled Substances Regulations, Narcotics, Controlled Drugs, Targeted Substances & Cannabis 8.3 Provincial Colleges of Pharmacy, Technician Scope of Practice & Privacy Laws

10 Chapter 9: Patient Safety, Continuous Quality Improvement & Ethics

9.1 Medication Incident Reporting, Root Cause Analysis & Continuous Quality Improvement 9.2 Error Prevention Strategies, High-Alert Medications & LASA Safeguards 9.3 Code of Ethics, Confidentiality & Professional Boundaries 9.4 Equity, Diversity, Inclusion & Cultural Safety in Pharmacy Practice

11 Chapter 10: Pharmacology Foundations, Communication & Public Health

10.1 Key Canadian Drug Classes, Common Indications & Canadian Brand/Generic Names 10.2 Evidence-Informed Decision Making & Authoritative Drug Information References 10.3 Interprofessional Collaboration, Effective Communication & Documentation Standards 10.4 Public Health Promotion, Harm Reduction & Community Wellness Programs

2.4 IV Flow Rates, Infusion Times & Electrolyte Solutions

Key Takeaways Explain This Topic AI

Intravenous volumetric infusion pumps deliver flow rates in millilitres per hour (mL/hr); gravity infusions require drop rate calculations in drops per minute (gtt/min) using the administration tubing drop factor.

Administration sets are categorized as macrodrip (10, 15, or 20 gtt/mL) for routine adult infusions, or microdrip (60 gtt/mL) for pediatric and precision infusions; on a 60 gtt/mL set, mL/hr numerically equals gtt/min.

Electrolytes are expressed in milliequivalents (mEq = [mg * valence] / MW) based on chemical charge, and millimoles (mmol = mg / MW); Canadian hospital practice standardizes clinical laboratory values and additive orders in millimoles.

Solution osmolarity dictates administration route: peripheral parenteral nutrition is generally kept at or below about 900 mOsmol/L to limit phlebitis, and more concentrated nutrition solutions go through central venous access.

Normal Saline (0.9% NaCl) provides 154 mEq/L each of Na+ and Cl- with an osmolarity of 308 mOsmol/L, making it physiologically isotonic with human blood plasma.

Last updated: September 2026

IV Flow Rates, Infusion Times & Electrolyte Solutions

Intravenous (IV) therapy delivers fluids, electrolytes, and life-sustaining medications directly into the venous circulation. Because intravenous administration bypasses protective gastrointestinal absorption barriers and first-pass hepatic metabolism, incorrect infusion rates or improperly calculated electrolyte concentrations can precipitate immediate toxicity, heart arrhythmias, pulmonary edema, or vascular collapse.

  • Intravenous Infusion Calculations
  • 1. Volumetric Pump Infusion Rate (mL/hr)

In modern Canadian hospitals, intravenous fluids are predominantly infused using electronic volumetric infusion pumps programmed in millilitres per hour (mL/hr) : Flow Rate (mL/hr) = Total Infusion Volume (mL) Infusion Time (hours) \text{Flow Rate (mL/hr)} = \frac{\text{Total Infusion Volume (mL)}}{\text{Infusion Time (hours)}} Flow Rate (mL/hr) = Infusion Time (hours) Total Infusion Volume (mL) ​

Worked Example: A physician orders 1,000 mL of 0.9% Sodium Chloride to be infused over 8 hours. Flow Rate = 1 , 000 mL 8 hr = 125 mL/hr \text{Flow Rate} = \frac{1,000\text{ mL}}{8\text{ hr}} = 125\text{ mL/hr} Flow Rate = 8 hr 1 , 000 mL ​ = 125 mL/hr

2. Gravity Drop Rate Calculations (gtt/min)

When electronic infusion pumps are unavailable (e.g., during emergency transport, field operations, or backup protocols), fluid flow is regulated via manual gravity administration tubing calibrated with a specific drop factor (drops per millilitre, gtt/mL ). Drop Rate (gtt/min) = Volume to Infuse (mL) × Drop Factor (gtt/mL) Time in Minutes (min) \text{Drop Rate (gtt/min)} = \frac{\text{Volume to Infuse (mL)} \times \text{Drop Factor (gtt/mL)}}{\text{Time in Minutes (min)}} Drop Rate (gtt/min) = Time in Minutes (min) Volume to Infuse (mL) × Drop Factor (gtt/mL) ​

Alternatively, if the flow rate in mL/hr is already known: Drop Rate (gtt/min) = Flow Rate (mL/hr) × Drop Factor (gtt/mL) 60 min/hr \text{Drop Rate (gtt/min)} = \frac{\text{Flow Rate (mL/hr)} \times \text{Drop Factor (gtt/mL)}}{60\text{ min/hr}} Drop Rate (gtt/min) = 60 min/hr Flow Rate (mL/hr) × Drop Factor (gtt/mL) ​

Types of IV Administration Sets

  • Set Type Drop Factor Clinical Use Special Rule
  • Macrodrip 10 gtt/mL Blood sets, rapid fluid resuscitation 1 mL = 10 drops
  • Macrodrip 15 gtt/mL Standard adult medical/surgical infusions 1 mL = 15 drops
  • Macrodrip 20 gtt/mL Standard adult infusions (manufacturer-specific sets) 1 mL = 20 drops
  • Microdrip (Minidrip) 60 gtt/mL Pediatric, neonatal, critical care titrations mL/hr equals gtt/min

The Microdrip Golden Rule: Because a microdrip set delivers 60 gtt/mL and 1 hour contains 60 minutes, the 60 in the numerator and denominator cancel out. Therefore, on a microdrip set:

Drop Rate (gtt/min) = Flow Rate (mL/hr) \text{Drop Rate (gtt/min)} = \text{Flow Rate (mL/hr)} Drop Rate (gtt/min) = Flow Rate (mL/hr)

3. Infusion Time and Volume Delivered Infusion Time (hours) = Total Volume (mL) Flow Rate (mL/hr) \text{Infusion Time (hours)} = \frac{\text{Total Volume (mL)}}{\text{Flow Rate (mL/hr)}} Infusion Time (hours) = Flow Rate (mL/hr) Total Volume (mL) ​ Volume Delivered (mL) = Flow Rate (mL/hr) × Time Elapsed (hours) \text{Volume Delivered (mL)} = \text{Flow Rate (mL/hr)} \times \text{Time Elapsed (hours)} Volume Delivered (mL) = Flow Rate (mL/hr) × Time Elapsed (hours)

Electrolyte Calculations: Milliequivalents and Millimoles

Electrolytes are inorganic minerals that dissociate into electrically charged ions when dissolved in water. In pharmacy practice, electrolyte dosages are quantified based on ionic activity rather than simple weight.

1. Milliequivalents (mEq)

A milliequivalent expresses the chemical combining activity of an electrolyte relative to 1 mg of hydrogen. It factors in both the molecular weight and the electrical charge (valence) of the ion: mEq = Weight in mg × Valence Molecular Weight (MW) \text{mEq} = \frac{\text{Weight in mg} \times \text{Valence}}{\text{Molecular Weight (MW)}} mEq = Molecular Weight (MW) Weight in mg × Valence ​ Weight in mg = mEq × Molecular Weight (MW) Valence \text{Weight in mg} = \frac{\text{mEq} \times \text{Molecular Weight (MW)}}{\text{Valence}} Weight in mg = Valence mEq × Molecular Weight (MW) ​

Valence Values of Common Pharmacy Electrolytes

Monovalent Ions (Valence = 1):

Na + \text{Na}^+ Na + (Sodium), K + \text{K}^+ K + (Potassium), Cl − \text{Cl}^- Cl − (Chloride), HCO 3 − \text{HCO}_3^- HCO 3 − ​ (Bicarbonate), NH 4 + \text{NH}_4^+ NH 4 + ​ (Ammonium), Li + \text{Li}^+ Li + (Lithium).

For monovalent electrolytes: 1 mEq = 1 mmol 1\text{ mEq} = 1\text{ mmol} 1 mEq = 1 mmol .

Divalent Ions (Valence = 2):

Ca 2 + \text{Ca}^{2+} Ca 2 + (Calcium), Mg 2 + \text{Mg}^{2+} Mg 2 + (Magnesium), SO 4 2 − \text{SO}_4^{2-} SO 4 2 − ​ (Sulfate), HPO 4 2 − \text{HPO}_4^{2-} HPO 4 2 − ​ (Phosphate).

For divalent electrolytes: 1 mmol = 2 mEq 1\text{ mmol} = 2\text{ mEq} 1 mmol = 2 mEq (or 1 mEq = 0.5 mmol 1\text{ mEq} = 0.5\text{ mmol} 1 mEq = 0.5 mmol ).

Trivalent Ions (Valence = 3):

Fe 3 + \text{Fe}^{3+} Fe 3 + (Ferric), Al 3 + \text{Al}^{3+} Al 3 + (Aluminum), PO 4 3 − \text{PO}_4^{3-} PO 4 3 − ​ (Phosphate ion in specific basic salts).

2. Millimoles (mmol) in Canadian Practice

In accordance with SI standards, Canadian hospital laboratories and electronic health records express electrolyte levels and additive orders in millimoles (mmol) rather than milliequivalents: mmol = Weight in mg Molecular Weight (MW) \text{mmol} = \frac{\text{Weight in mg}}{\text{Molecular Weight (MW)}} mmol = Molecular Weight (MW) Weight in mg ​

Worked Example: Potassium Chloride (KCl) has a molecular weight of 74.55 g/mol. How many millimoles and milliequivalents of potassium are provided by 1.5 g of KCl?

Convert grams to milligrams: 1.5 g = 1 , 500 mg 1.5\text{ g} = 1,500\text{ mg} 1.5 g = 1 , 500 mg .

Calculate millimoles: mmol = 1 , 500 / 74.55 = 20.12 mmol \text{mmol} = 1,500 / 74.55 = 20.12\text{ mmol} mmol = 1 , 500/74.55 = 20.12 mmol .

Since potassium ( K + \text{K}^+ K + ) is monovalent (valence = 1), 20.12 mmol = 20.12 mEq 20.12\text{ mmol} = 20.12\text{ mEq} 20.12 mmol = 20.12 mEq .

  • Osmolarity, Tonicity & Safety Boundaries
  • Osmolarity Calculations

Osmolarity measures the total number of osmotically active particles (solute particles) per litre of solution, expressed in milliosmoles per litre (mOsmol/L) : mOsmol/L = Grams of Solute/L Molecular Weight (g/mol) × Number of Dissociable Particles ( n ) × 1 , 000 \text{mOsmol/L} = \frac{\text{Grams of Solute/L}}{\text{Molecular Weight (g/mol)}} \times \text{Number of Dissociable Particles } (n) \times 1,000 mOsmol/L = Molecular Weight (g/mol) Grams of Solute/L ​ × Number of Dissociable Particles ( n ) × 1 , 000

Particle Dissociation Values ( n n n )

Non-electrolytes (do not dissociate): Dextrose, Mannitol ⟹ n = 1 \implies n = 1 ⟹ n = 1 .

Binary salts (dissociate into 2 ions): NaCl ( Na + + Cl − ) \text{NaCl} (\text{Na}^+ + \text{Cl}^-) NaCl ( Na + + Cl − ) , KCl ( K + + Cl − ) ⟹ n = 2 \text{KCl} (\text{K}^+ + \text{Cl}^-) \implies n = 2 KCl ( K + + Cl − ) ⟹ n = 2 .

Ternary salts (dissociate into 3 ions): CaCl 2 ( Ca 2 + + 2 Cl − ) ⟹ n = 3 \text{CaCl}_2 (\text{Ca}^{2+} + 2\text{Cl}^-) \implies n = 3 CaCl 2 ​ ( Ca 2 + + 2 Cl − ) ⟹ n = 3 .

Osmolarity of Normal Saline (0.9% NaCl)

Concentration: 0.9 % w/v = 9 g/L 0.9\%\text{ w/v} = 9\text{ g/L} 0.9% w/v = 9 g/L .

Molecular weight of NaCl: 58.44 g/mol 58.44\text{ g/mol} 58.44 g/mol .

Dissociable particles ( n n n ): 2. mOsmol/L = 9 g/L 58.44 g/mol × 2 × 1 , 000 = 308 mOsmol/L \text{mOsmol/L} = \frac{9\text{ g/L}}{58.44\text{ g/mol}} \times 2 \times 1,000 = 308\text{ mOsmol/L} mOsmol/L = 58.44 g/mol 9 g/L ​ × 2 × 1 , 000 = 308 mOsmol/L

Normal human serum osmolarity is approximately 280 to 295 mOsmol/L . Because 308 mOsmol/L closely approximates plasma, 0.9% NaCl is physiologically isotonic .

Comparison of Common Intravenous Solutions

IV Solution Calculated Osmolarity Tonicity Relative to Plasma Clinical Notes

0.9% Sodium Chloride (Normal Saline, NS) 308 mOsmol/L Isotonic Extracellular fluid expansion; 154 mEq/L Na+, 154 mEq/L Cl-

Lactated Ringer's (LR) 273 mOsmol/L Isotonic Surgical replacement; contains Na+, K+, Ca2+, Cl-, lactate

5% Dextrose in Water (D5W) 252 mOsmol/L Isotonic in container; Hypotonic in body Dextrose is rapidly metabolized to CO2 and H2O, leaving free water

0.45% Sodium Chloride (Half-NS) 154 mOsmol/L Hypotonic Shifts fluid into cells; contraindicated in elevated intracranial pressure

3% Sodium Chloride (Hypertonic Saline) 1,026 mOsmol/L Hypertonic Severe symptomatic hyponatremia; given under close monitoring per institutional protocol

  • 10% Dextrose in Water (D10W) 505 mOsmol/L Hypertonic Neonatal hypoglycemia; severe liver failure
  • The Peripheral Venous Osmolarity Threshold

A widely used rule of thumb, taken from parenteral nutrition guidance, is about 900 mOsmol/L for peripheral infusion:

Peripheral Limit: Peripheral parenteral nutrition is generally kept at or below about 900 mOsmol/L . Hospitals set their own limits for other hypertonic infusions.

Central Line Use: Solutions well above that threshold (e.g., concentrated TPN with high dextrose and amino acids) are given through a Central Venous Catheter (CVC) or Peripherally Inserted Central Catheter (PICC), where blood flow dilutes the solution quickly. Some hypertonic products, such as 3% saline, may be given peripherally under a specific institutional protocol.

Mechanism of Harm: Infusing hypertonic solutions ( > 900 mOsmol/L >900\text{ mOsmol/L} > 900 mOsmol/L ) into small peripheral veins draws water rapidly out of vascular endothelial cells, causing extreme chemical phlebitis, endothelial damage, severe pain, venous thrombosis, and severe extravasation necrosis.

Loading diagram... Intravenous Line Selection & Osmolarity Decision Tree