Study guide
10.1 Environmental Protection: Drift, Runoff, Water Protection, and Spill Response
California Structural Pest Control — Branch 2 General Pest Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Licensing, Laws, and SPCB Regulations
1.1 SPCB Board Rules, Licensing, and Field Rep Requirements 1.2 Recordkeeping, Reporting, and Disciplinary Procedures 1.3 SPCB vs. DPR vs. EPA: Regulatory Jurisdictions
2 Chapter 2: Structural Pest Identification: Cockroaches and Ants
2.1 Biology and Identification of California Pest Cockroaches 2.2 Biology, Trails, and Identification of California Ants 2.3 Metamorphosis and Basic Insect Anatomy
3 Chapter 3: Identification: Flying, Stinging, Fabric, and Stored Product Pests
3.1 Stinging and Biting Insects: Bees, Wasps, Hornets, Yellowjackets, and Bed Bugs 3.2 Flies, Gnats, and Occasional Invaders 3.3 Stored Product Pests and Fabric Pests
4 Chapter 4: Biology & Identification: Rodents and Vertebrate Pests
4.1 Commensal Rodents Biology and Habits 4.2 Signs of Rodent Infestation and Harborages 4.3 Birds and Other Vertebrate Pests
5 Chapter 5: Inspections, Monitoring, and Conducive Conditions
5.1 Customer Interviewing and Inspection Techniques 5.2 Identifying Conducive Conditions 5.3 Pest Monitoring Tools, Traps, and Thresholds
6 Chapter 6: Integrated Pest Management (IPM) & Treatment Planning
6.1 Principles and Steps of Integrated Pest Management 6.2 Mechanical, Cultural, Biological, and Physical Controls 6.3 Chemical Control Selection, Resistance Management, and Treatment Planning
7 Chapter 7: Pest Control Equipment, Maintenance, and Calibration
7.1 Application Equipment: Compressed Air Sprayers, Dusters, and Bait Guns 7.2 Equipment Maintenance and Troubleshooting 7.3 Equipment Calibration
8 Chapter 8: Pesticides, Formulations, Labels, and Calculations
8.1 Pesticide Formulations and Adjuvants 8.2 Deciphering the Pesticide Label 8.3 Dose, Dilution, and Area Application Calculations
9 Chapter 9: Treatment Preparation, Notification, and Application
9.1 Site Preparation, Customer Notification, and Chemical Safety 9.2 Pesticide Application Techniques 9.3 Post-Application Notice, Service Records, and Re-entry Directions
10 Chapter 10: Safety, Environmental Protection, and Personal Safety
10.1 Environmental Protection: Drift, Runoff, Water Protection, and Spill Response 10.2 Pesticide Storage, Transport, Container Disposal, and Waste Management 10.3 Personal Protection: Exposure Routes, PPE Requirements, and Respirator Programs 10.4 Symptoms of Pesticide Poisoning, First Aid, and Emergency Procedures
10.1 Environmental Protection: Drift, Runoff, Water Protection, and Spill Response
Key Takeaways Explain This Topic AI
Under 3 CCR 6970, listed pyrethroids may not be applied outdoors to any site during precipitation, except to the underside of eaves, or to surfaces with standing water.
Before and during an application, evaluate weather, equipment, and surroundings, and do not apply or continue when drift could contaminate people or nontarget property (3 CCR 6614); follow any wind limit on the label.
The Three Cs of pesticide spill response are Control the leak, Contain the spill, and Clean up the contaminated materials immediately.
Spray drift is minimized by using lower pressure and nozzles that produce larger droplet sizes, reducing the generation of drift-prone fine particles.
Last updated: October 2026
- 10.1 Environmental Protection: Drift, Runoff, Water Protection, and Spill Response
- The Critical Importance of Environmental Protection
Environmental protection is not just a regulatory obligation; it is a foundational component of modern Integrated Pest Management (IPM). Structural pest control technicians in California operate under the joint jurisdiction of the California Department of Pesticide Regulation (DPR) and the Structural Pest Control Board (SPCB). These agencies enforce strict environmental standards to protect the state's diverse ecosystems, endangered species, and vital water resources. Every pesticide application carries the potential to impact non-target organisms, contaminate soil, and degrade water quality if not executed with precision and care. Applicators must understand the pathways of pesticide movement in the environment—principally through spray drift, vapor drift, and surface runoff—and employ effective prevention strategies to mitigate these risks. Failure to prevent environmental contamination can lead to severe civil penalties, license revocation, and long-term ecological damage.
Pesticide Drift: Mechanics, Prevention, and Wind Constraints
Pesticide drift refers to the physical movement of pesticide droplets or vapor through the air to non-target areas during or after application. Drift is classified into two primary types: particle drift and vapor drift.
Particle Drift: This is the physical movement of liquid spray droplets away from the target site. It occurs during application and is heavily influenced by meteorological conditions and application equipment settings.
Vapor Drift: This occurs after application when volatile pesticide residues evaporate from the treated surface and move off-site as a gas. Vapor drift is primarily determined by the chemical properties of the pesticide (its volatility) and high ambient temperatures.
To prevent particle drift, technicians must closely monitor meteorological conditions. Wind is a critical weather factor. California requires the applicator to evaluate the equipment, meteorological conditions, the property, and surrounding properties before and while applying, and no application may be made or continued when there is a reasonable possibility of contaminating people not involved in the application or damaging or contaminating nontarget property (3 CCR 6614). Follow any wind-speed limit the label sets; DPR's PSIS N-1 warns that too much wind can drift pesticides onto people or sensitive plants. However, the absence of wind also presents a severe hazard known as a temperature inversion . In normal atmospheric conditions, air near the ground is warmer and rises, dispersing airborne particles. During a temperature inversion, a layer of cool air is trapped near the ground by a layer of warm air above it. Under these stable conditions, extremely small pesticide droplets can remain suspended in the air like fog and drift horizontally for miles with subtle breezes. Therefore, applications should be avoided during calm, stagnant conditions, particularly in the early morning or late evening.
Equipment configuration is the technician's primary tool for controlling droplet size, which directly correlates with drift risk. Small droplets (less than 150 microns in diameter) are highly prone to drift because they remain airborne longer. Large droplets fall rapidly and are less affected by wind. The three main factors controlling droplet size are:
Nozzle Selection: Fan-type nozzles generally produce larger, more uniform droplets compared to cone-type nozzles. Low-drift or air-induction nozzles are specifically engineered to minimize the production of fine particles.
Operating Pressure: High pressure shears the liquid sheet into smaller droplets. Technicians must operate sprayers at the lowest effective pressure recommended by the label to prevent the formation of mist or fine spray.
Shear Angle: The angle of the nozzle relative to the direction of travel or wind can also affect droplet shear, though this is more relevant in agricultural settings than structural applications.
Runoff Prevention and Water Resource Protection
Pesticide runoff occurs when rainwater, irrigation water, or hose-downs carry pesticide residues off treated surfaces and into soil, storm drains, or surface water. Unlike agricultural runoff, which primarily impacts rural streams, structural pest control runoff in urban environments quickly enters concrete-lined storm drains. Because storm drains flow directly into local water bodies without treatment, urban pesticide applications are a major source of aquatic toxicity in California.
To combat this, California has enacted specific surface water protection regulations, particularly targeting pyrethroid insecticides (e.g., bifenthrin, cyfluthrin, deltamethrin). The most critical rules include:
Who and What: 3 CCR 6970 applies to anyone performing pest control for hire who applies listed pyrethroids (including bifenthrin, cyfluthrin, cypermethrin, deltamethrin, lambda-cyhalothrin, and permethrin) outdoors to structural, residential, industrial, and institutional sites.
No Application During Precipitation: Applications to any site during precipitation are prohibited, except applications made to the underside of eaves. Applications to soil, lawn, turf, or impervious surfaces with standing water, including puddles, are also prohibited. There is no 24-hour rain-forecast rule in 6970; follow any weather restriction on the label.
Hard Surfaces, Windows, and Doors: Horizontal impervious surfaces (such as driveways, patios, and sidewalks) and windows and doors may receive only spot treatment, crack and crevice treatment, or pin-stream treatment of 1 inch wide or less.
Soil, Mulch, Gravel, Lawn, Turf, and Groundcover: Spot, pin stream of 1 inch or less, a perimeter band of 3 feet wide or less from the base of the building outward, or broadcast treatment but not within 2 feet of any horizontal impervious surface.
Vertical Surfaces (Walls, Foundations, Fencing): Spot, crack and crevice, pin stream of 1 inch or less, or a perimeter band up to 2 feet above grade. Applications to the underside of eaves are exempt (3 CCR 6972).
Drains and Water: Never apply to a sewer, storm drain, curbside gutter, or a drainage grate or french drain that leads to one. Do not apply to soil, lawn, turf, or impervious surfaces within 25 feet of aquatic habitat located downgradient. For preconstruction termiticide sites, the setback from a downgradient storm drain is 10 feet.
Soil characteristics also play a role. Sandy soils are highly porous and low in organic matter, making them prone to leaching (the vertical downward movement of pesticides through the soil profile into groundwater). Clay soils, conversely, are fine-grained and do not drain easily, which increases the likelihood of water pooling and horizontal runoff.
Spill Response: The Three Cs Protocol
Even with the best preventative measures, pesticide spills can occur during transport, mixing, loading, or application. In the event of a spill, structural pest control technicians must act immediately to protect human health and the environment by executing the "Three Cs" protocol in order:
Control the Leak: The first priority is to stop the flow of pesticide at its source. This must be done while wearing full PPE, including chemical-resistant gloves, protective eyewear, and a respirator if volatile fumes are present. Actions include setting a tipped container upright, patching a punctured hose, closing a valve, or transferring the remaining chemical to a secondary container.
Contain the Spill: Once the leak is stopped, the technician must prevent the spilled liquid from spreading and reaching sensitive areas. This is achieved by creating dikes or barriers using soil, sand, or absorbent snakes from the vehicle's spill kit. Storm drains and soil surfaces must be covered or blocked immediately. For small spills, absorbent powders or clay litters are spread directly over the liquid.
Clean It Up: Soak up liquid spills with absorbent materials such as cat litter, sand, or clay. If the pesticide or absorbent is likely to blow around, moisten it very slightly with water or cover it with a sweeping compound or plastic. On soil, shovel out the top 2 to 3 inches for disposal. Place the clean-up materials in a leak-proof container labeled with the pesticide name and signal word (DPR PSIS N-2). The label may give detailed spill clean-up directions, and most labels list a toll-free number for spill guidance. Never hose down a spill, as this spreads the contamination and causes runoff.
If the spill is on a public road, immediately call 911 and the California Governor's Office of Emergency Services (CalOES) at 1-800-852-7550. Keep people out of the spill area, give first aid to anyone contaminated, and notify your employer; if someone is contaminated or injured, the employer must notify Cal/OSHA.
A Recommended Vehicle Spill Kit
Carrying a spill kit is good practice. The vehicle rules themselves are that pesticides are not transported in the same compartment with people, food, or feed, containers are secured against spills (3 CCR 6682), and pesticide storage on the vehicle is never left unlocked or unattended (16 CCR 1983(c)). A practical kit includes:
Personal Protective Equipment: Chemical-resistant gloves, protective eyewear, coveralls, and any respirator the labels you carry require.
Absorbent Materials: Absorbent clay, cat litter, sand, or spill pillows.
Containment Tools: Absorbent socks or snakes to divert flow.
Cleanup Tools: A broom, a shovel or dustpan, and heavy-duty leak-proof bags or a container, plus a marker to label it with the pesticide name and signal word.
Emergency Information: Emergency contact numbers (including the County Agricultural Commissioner and CalOES) and the product labels.