Transformer Ratios, Losses, Cooling and Ratings

SOPEEC 4th Class Power Engineer Part 4A — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 Examination and Mechanics Foundations

Examination, Certification and Study Method Applied Mathematics & Units of Measurement Moments, Free-Body Diagrams and Equilibrium Scalars, Graphical Vectors and Force Components

2 Motion, Energy and Plant Drives

Simple Machines and Mechanical Advantage Kinematics and Linear Motion Work, Pressure, Power and Mechanical Energy Dry Friction, Sliding Loads and Friction Power Stress, Strain, Material Behaviour and Safety Factors Belts, Gears, Couplings and Transmitted Power

3 Heat, Thermodynamic Laws and Steam

Heat, Temperature, and Thermal Expansion Thermodynamic Laws and Ideal Gas Calculations Conduction, Convection and Radiation Heat Exchanger Construction, Balances and Operation Thermodynamics of Steam & Steam Tables

4 Chemistry of Plant Fluids

Chemical Principles for Power Engineers

5 Legislation, Canadian Standards and ASME Codes

Jurisdictional Acts, Regulations and Plant Responsibilities Canadian Standards, Registration and Refrigerant Safety ASME Construction, Materials, Examination and Welding Codes

6 Plant Safety and Fire Protection

Plant Hazard Assessment, Worker Rights and PPE Safety Programs, Permits, Isolation and Confined Spaces WHMIS, SDSs and Dangerous-Material Handling Fire Prevention, Detection, Fixed Systems and Emergency Plans Fire Classes, Extinguishing Agents and Portable Response

7 Environment and Plant Emissions

Plant Environmental Impacts, Approvals and Monitoring Gaseous Emissions, Controls and Plant Noise Liquid and Solid Wastes, Containment and Spill Response

8 Materials, Welding and Examination

Ferrous and Nonferrous Materials, Alloys and Heat Treatment Welding Processes, Discontinuities and Hydrogen Control Material Tests and Weld Examination Methods

9 Piping, Valves and Drainage

Piping Dimensions, Materials, Joints, Expansion and Supports Industrial Valves, Non-Return Devices and Reducing Stations Steam Traps, Drainage, Separators and Water Hammer

10 Electrical Principles and Plant Power

Electrical Quantities, DC Circuits, Power and Energy AC Waveforms, Reactance and Power Factor Magnetic Circuits, Electromagnets and Induction Electrical Meter Designs, Connections and Interpretation AC and DC Motors, Generators and Three-Phase Connections Transformer Ratios, Losses, Cooling and Ratings Electrical Distribution, Protection and Station DC Systems

11 Process Measurements and Control Systems

Pressure Sensors, Transmitters and Impulse Connections Mechanical Thermometers, RTDs and Thermocouples Direct and Inferential Liquid-Level Measurement Flow, Humidity and Composition Instruments Control-System Purpose, Feedback and Controller Modes Transmitters, Recorders, Signals and Final Control Elements Boiler Programming, Flame Supervision and Functional Tests Electronic Signal Conditioning, Logic and Digital Controllers Relays, Contactors, Starter Circuits and Electrical Interlocks

12 Sketches, Diagrams and Operating Communication

Equipment Sketches and Plant Line Tracing Plant Diagrams, P&IDs and Instrument Tags Radios, Alarms, Records and Shift Handover

13 Boiler Development and Construction

Boiler Development, Components and Configurations Firetube Designs, Gas Passes, Stays and Bracing Watertube Circulation, Drums and Heat-Recovery Surfaces Resistance-Element and Electrode Boilers Sectional, Coil, Finned-Tube and Condensing Heating Boilers Power and Heating Boiler Code Scopes and Protective Functions

14 Combustion, Fuel, Draft, Feedwater, Blowdown and Cleaning

Combustion Conditions, Air Supply and Flue-Gas Analysis Gas, Liquid and Solid Boiler Fuel Systems Natural, Forced, Induced and Balanced Draft Open and Pressurized Feedwater Systems Continuous and Bottom Blowdown, Discharge and Balances Fireside Deposits, Sootblowers and Offline Cleaning

Transformer Ratios, Losses, Cooling and Ratings

Key Takeaways Explain This Topic AI

Ideal voltage ratio equals turns ratio; current changes inversely.

Core losses differ from load-dependent winding I²R losses.

Laminations reduce circulating eddy currents.

A transformer’s frequency, voltage, load and cooling ratings constrain use.

Last updated: October 2026

Transformer Principles, Efficiency & Cooling Classifications

A transformer is a static electromagnetic device that transfers alternating current electrical energy from one circuit to another at the same frequency through mutual electromagnetic induction , altering voltage and current levels proportionally.

The Ideal Transformer Relationship

An ideal transformer consists of two isolated windings wound on a common high-permeability laminated ferromagnetic core. The primary winding connects to the AC input source, while the secondary winding connects to the load. Neglecting internal losses: V p V s = N p N s = I s I p = a \frac{V_p}{V_s} = \frac{N_p}{N_s} = \frac{I_s}{I_p} = a V s ​ V p ​ ​ = N s ​ N p ​ ​ = I p ​ I s ​ ​ = a

Where:

• V p , V s V_p, V_s V p ​ , V s ​ = Primary and secondary RMS terminal voltages
• N p , N s N_p, N_s N p ​ , N s ​ = Number of turns in primary and secondary coils
• I p , I s I_p, I_s I p ​ , I s ​ = Primary and secondary currents
• a a a = Turns ratio

Fundamental Rule of Conservation of Energy: A step-up transformer increases voltage while proportionally reducing current; a step-down transformer decreases voltage while proportionally increasing current. Total apparent power remains constant: S p = V p ⋅ I p = V s ⋅ I s = S s S_p = V_p \cdot I_p = V_s \cdot I_s = S_s S p ​ = V p ​ ⋅ I p ​ = V s ​ ⋅ I s ​ = S s ​ .

Transformer Losses & Efficiency

Because transformers have zero moving parts or bearings, their operating efficiencies are high, often exceeding 98 % 98\% 98% . Internal energy losses are categorized into two primary forms:

Copper Losses ( I 2 R I^2R I 2 R Losses): Resistive heat generated by load currents flowing through the primary and secondary copper windings. Copper losses vary with the square of the connected electrical load current ( P cu ∝ I 2 P_{\text{cu}} \propto I^2 P cu ​ ∝ I 2 ).

Iron (Core) Losses: Losses that occur continuously in the magnetic core whenever the transformer is energized, at the applied voltage and frequency, with load-related changes and other losses considered:

Hysteresis Loss: Energy expended overcoming internal molecular friction as magnetic domains reverse alignment 120 times per second under 60 Hz 60\text{ Hz} 60 Hz AC. Minimized by constructing the core from grain-oriented silicon alloy steel.

Eddy Current Loss: Circulating electrical currents induced inside the conductive core iron itself by the alternating magnetic flux. Minimized by constructing the core from thin, stacked sheets of silicon steel (laminations) , insulated from each other by a microscopic layer of baked varnish or oxide film. The laminations break up the circular conductive loops, raising electrical resistance and slashing eddy current heating.

Transformer Cooling Classifications

Internal heat generated by copper and core losses must be dissipated to prevent thermal breakdown of winding insulation. Transformers are classified by their cooling mechanisms under IEEE/CSA standards:

Classification Code Description & Mechanism Typical Application

AA (Dry-Type) Ventilated dry-type transformer cooled strictly by natural air convection through casing louvers. Indoor institutional buildings, control rooms, boiler plant motor control centers.

FA (Dry-Type) Forced-air cooling utilizing thermostatic electric fans to boost radiator capacity. Indoor substations handling peak auxiliary loads.

ONAN O il N atural, A ir N atural. Core and windings are immersed in mineral insulating oil inside an outdoor steel tank. Oil circulates by natural thermal siphon convection through external cooling tubes/radiators, cooled by ambient air. Standard outdoor industrial unit substations ( 500 kVA 500\text{ kVA} 500 kVA to 10 MVA 10\text{ MVA} 10 MVA ).

ONAF O il N atural, A ir F orced. Employs external motorized fans directed at radiator banks to enhance air cooling while oil circulates by natural thermosiphon. High-load distribution substations ( 5 MVA 5\text{ MVA} 5 MVA to 50 MVA 50\text{ MVA} 50 MVA ).

OFAF / ODAF Forced oil circulation and forced air cooling; OD identifies directed oil flow. Employs external centrifugal pumps to circulate hot transformer oil through radiators while motorized fans force high-velocity air across cooling fins. Central utility generation step-up transformers ( > 50 MVA > 50\text{ MVA} > 50 MVA ).

Turns-ratio example and operating limits

An ideal single-phase transformer has 1,000 primary turns and 100 secondary turns. With 600 V applied to its rated primary, the ideal secondary voltage is 60 V. If the secondary supplies 20 A, its apparent load is 1,200 VA and ideal primary current is 2 A. The frequency is unchanged. Real input includes magnetizing current and losses, so exact equality of input and output real power is an idealization.

Do not connect a transformer designed for AC directly to steady DC. Without alternating flux and the intended inductive impedance, current can become excessive and overheat the winding. Rated frequency, voltage, kVA, cooling condition and insulation limits all matter. An autotransformer shares part of a winding between circuits and does not provide the same electrical separation as a separate-winding transformer. Instrument transformers serve measurement/protection duties and have their own secondary safety requirements.

Source notes

Official scope and technical references checked 2026-10-17: Reference 1 ; Reference 2 . Archived DOE handbooks are used for physical principles, not current Canadian legal requirements.