Study guide

Heat, Temperature, and Thermal Expansion

SOPEEC 4th Class Power Engineer Part 4A — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 Examination and Mechanics Foundations

Examination, Certification and Study Method Applied Mathematics & Units of Measurement Moments, Free-Body Diagrams and Equilibrium Scalars, Graphical Vectors and Force Components

2 Motion, Energy and Plant Drives

Simple Machines and Mechanical Advantage Kinematics and Linear Motion Work, Pressure, Power and Mechanical Energy Dry Friction, Sliding Loads and Friction Power Stress, Strain, Material Behaviour and Safety Factors Belts, Gears, Couplings and Transmitted Power

3 Heat, Thermodynamic Laws and Steam

Heat, Temperature, and Thermal Expansion Thermodynamic Laws and Ideal Gas Calculations Conduction, Convection and Radiation Heat Exchanger Construction, Balances and Operation Thermodynamics of Steam & Steam Tables

4 Chemistry of Plant Fluids

Chemical Principles for Power Engineers

5 Legislation, Canadian Standards and ASME Codes

Jurisdictional Acts, Regulations and Plant Responsibilities Canadian Standards, Registration and Refrigerant Safety ASME Construction, Materials, Examination and Welding Codes

6 Plant Safety and Fire Protection

Plant Hazard Assessment, Worker Rights and PPE Safety Programs, Permits, Isolation and Confined Spaces WHMIS, SDSs and Dangerous-Material Handling Fire Prevention, Detection, Fixed Systems and Emergency Plans Fire Classes, Extinguishing Agents and Portable Response

7 Environment and Plant Emissions

Plant Environmental Impacts, Approvals and Monitoring Gaseous Emissions, Controls and Plant Noise Liquid and Solid Wastes, Containment and Spill Response

8 Materials, Welding and Examination

Ferrous and Nonferrous Materials, Alloys and Heat Treatment Welding Processes, Discontinuities and Hydrogen Control Material Tests and Weld Examination Methods

9 Piping, Valves and Drainage

Piping Dimensions, Materials, Joints, Expansion and Supports Industrial Valves, Non-Return Devices and Reducing Stations Steam Traps, Drainage, Separators and Water Hammer

10 Electrical Principles and Plant Power

Electrical Quantities, DC Circuits, Power and Energy AC Waveforms, Reactance and Power Factor Magnetic Circuits, Electromagnets and Induction Electrical Meter Designs, Connections and Interpretation AC and DC Motors, Generators and Three-Phase Connections Transformer Ratios, Losses, Cooling and Ratings Electrical Distribution, Protection and Station DC Systems

11 Process Measurements and Control Systems

Pressure Sensors, Transmitters and Impulse Connections Mechanical Thermometers, RTDs and Thermocouples Direct and Inferential Liquid-Level Measurement Flow, Humidity and Composition Instruments Control-System Purpose, Feedback and Controller Modes Transmitters, Recorders, Signals and Final Control Elements Boiler Programming, Flame Supervision and Functional Tests Electronic Signal Conditioning, Logic and Digital Controllers Relays, Contactors, Starter Circuits and Electrical Interlocks

12 Sketches, Diagrams and Operating Communication

Equipment Sketches and Plant Line Tracing Plant Diagrams, P&IDs and Instrument Tags Radios, Alarms, Records and Shift Handover

13 Boiler Development and Construction

Boiler Development, Components and Configurations Firetube Designs, Gas Passes, Stays and Bracing Watertube Circulation, Drums and Heat-Recovery Surfaces Resistance-Element and Electrode Boilers Sectional, Coil, Finned-Tube and Condensing Heating Boilers Power and Heating Boiler Code Scopes and Protective Functions

14 Combustion, Fuel, Draft, Feedwater, Blowdown and Cleaning

Combustion Conditions, Air Supply and Flue-Gas Analysis Gas, Liquid and Solid Boiler Fuel Systems Natural, Forced, Induced and Balanced Draft Open and Pressurized Feedwater Systems Continuous and Bottom Blowdown, Discharge and Balances Fireside Deposits, Sootblowers and Offline Cleaning

Heat, Temperature, and Thermal Expansion

Key Takeaways Explain This Topic AI

Heat is energy transferred because of temperature difference; temperature is a property of thermal state.

Absolute zero (0 K, -273.15°C, -459.67°F, 0°R) represents the theoretical state where molecular translational kinetic energy is at its minimum.

Sensible heat produces measurable temperature change without a phase change (Q = m·c·ΔT), while latent heat powers isothermal phase changes (334 kJ/kg for ice fusion, 2257 kJ/kg for atmospheric water vaporization).

Restrained thermal expansion can cause stress; ΔL = L₀αΔT predicts free linear growth for the stated coefficient.

Bimetallic strips exploit differences in linear expansion coefficients between bonded metals to translate temperature variations into mechanical displacement for thermostats and safety switches.

Last updated: October 2026

Thermodynamics is the foundational science governing steam plant operation, boiler efficiency, and energy conversion. For the 4th Class Power Engineer, understanding the fundamental physical distinction between thermal energy, heat, and temperature is critical for safe plant operation and precise engineering calculations.

1. Physical Foundations: Heat vs. Temperature

In everyday language, "heat" and "temperature" are often used interchangeably, but in engineering physics they represent distinctly different physical phenomena:

Temperature ( T T T ): An intensive thermodynamic property that characterizes thermal state; average translational kinetic energy is a useful temperature model for an ideal gas. It indicates the thermal intensity or "hotness" of a body and determines the direction of spontaneous heat transfer. Temperature does not depend on the mass of the substance.

Heat ( Q Q Q ): Thermal energy in transit across a thermodynamic boundary solely as a result of a temperature difference between two bodies or systems. Heat is a path function and energy in transition; a system does not contain heat—it contains internal energy ( U U U ). Once transferred, heat becomes internal kinetic and potential energy within the receiving body.

Thermal energy spontaneously flows from a region of higher temperature to a region of lower temperature until thermal equilibrium is established. This concept is formalized by the Zeroth Law of Thermodynamics : if two systems are each in thermal equilibrium with a third system, they must be in thermal equilibrium with each other. The Zeroth Law provides the theoretical basis for temperature measurement with thermometers. Heat Unit Relationships:

  • 1 Joule (J) = 1 Newton · metre (N·m)
  • 1 kilojoule (kJ) = 1,000 J
  • 1 Megajoule (MJ) = 1,000,000 J
  • 1 British Thermal Unit (Btu) ≈ 1.055 kJ
  • 2. Engineering Temperature Scales & Absolute Zero

Power engineering utilizes four primary temperature scales, grouped into relative scales (referenced to physical freezing/boiling points of water) and absolute scales (referenced to absolute zero):

Scale Symbol Base Reference Point Freezing Point ( H 2 O H_2O H 2 ​ O ) Boiling Point ( H 2 O H_2O H 2 ​ O ) Absolute Zero

Celsius ∘ C ^\circ\text{C} ∘ C Metric Relative 0 ∘ C 0^\circ\text{C} 0 ∘ C 100 ∘ C 100^\circ\text{C} 10 0 ∘ C − 273.15 ∘ C -273.15^\circ\text{C} − 273.1 5 ∘ C

Kelvin K \text{K} K Metric Absolute 273.15 K 273.15\text{ K} 273.15 K 373.15 K 373.15\text{ K} 373.15 K 0 K 0\text{ K} 0 K

Fahrenheit ∘ F ^\circ\text{F} ∘ F Imperial Relative 32 ∘ F 32^\circ\text{F} 3 2 ∘ F 212 ∘ F 212^\circ\text{F} 21 2 ∘ F − 459.67 ∘ F -459.67^\circ\text{F} − 459.6 7 ∘ F

Rankine ∘ R ^\circ\text{R} ∘ R Imperial Absolute 491.67 ∘ R 491.67^\circ\text{R} 491.6 7 ∘ R 671.67 ∘ R 671.67^\circ\text{R} 671.6 7 ∘ R 0 ∘ R 0^\circ\text{R} 0 ∘ R

Absolute Zero

Absolute zero ( 0 K 0\text{ K} 0 K or − 273.15 ∘ C -273.15^\circ\text{C} − 273.1 5 ∘ C ) is the theoretical temperature that sets the lower endpoint of thermodynamic temperature; quantum zero-point motion does not vanish. At this point, the internal thermal kinetic energy of the molecules reaches its absolute thermodynamic minimum. While absolute zero can be approached within fractions of a microkelvin in cryogenic laboratories, the Third Law of Thermodynamics dictates that it cannot be achieved in a finite number of steps.

Temperature Conversion Formulas

Power engineers frequently convert between operating specifications and thermodynamic calculations: Celsius to Kelvin: T K = T C + 273.15 \text{Celsius to Kelvin: } T_K = T_C + 273.15 Celsius to Kelvin: T K ​ = T C ​ + 273.15 Fahrenheit to Rankine: T R = T F + 459.67 \text{Fahrenheit to Rankine: } T_R = T_F + 459.67 Fahrenheit to Rankine: T R ​ = T F ​ + 459.67 Celsius to Fahrenheit: T F = 9 5 T C + 32 = 1.8 T C + 32 \text{Celsius to Fahrenheit: } T_F = \frac{9}{5}T_C + 32 = 1.8 T_C + 32 Celsius to Fahrenheit: T F ​ = 5 9 ​ T C ​ + 32 = 1.8 T C ​ + 32 Fahrenheit to Celsius: T C = 5 9 ( T F − 32 ) = T F − 32 1.8 \text{Fahrenheit to Celsius: } T_C = \frac{5}{9}(T_F - 32) = \frac{T_F - 32}{1.8} Fahrenheit to Celsius: T C ​ = 9 5 ​ ( T F ​ − 32 ) = 1.8 T F ​ − 32 ​

Scale Intervals: Because the Celsius and Kelvin scales have the same size degree increment, a temperature change of 1 ∘ C 1^\circ\text{C} 1 ∘ C equals a change of 1 K 1\text{ K} 1 K ( Δ T C = Δ T K \Delta T_C = \Delta T_K Δ T C ​ = Δ T K ​ ). Similarly, Δ T F = Δ T R \Delta T_F = \Delta T_R Δ T F ​ = Δ T R ​ . The relationship between scale intervals is: 1.0 ∘ C = 1.0 K = 1.8 ∘ F = 1.8 ∘ R 1.0^\circ\text{C} = 1.0\text{ K} = 1.8^\circ\text{F} = 1.8^\circ\text{R} 1. 0 ∘ C = 1.0 K = 1. 8 ∘ F = 1. 8 ∘ R

3. Sensible Heat and Specific Heat Capacity

Sensible heat is heat energy transferred to or from a substance that results in a change in temperature without causing a change in physical phase (state). It is called "sensible" because the energy change can be directly "sensed" by a thermometer.

The quantity of sensible heat transferred depends on the mass, the specific heat capacity, and the temperature differential: Q = m c Δ T = m c ( T 2 − T 1 ) Q = m c \Delta T = m c (T_2 - T_1) Q = m c Δ T = m c ( T 2 ​ − T 1 ​ )

Where:

  • Q Q Q = quantity of heat transferred ( kJ \text{kJ} kJ )
  • m m m = mass of the substance ( kg \text{kg} kg )

c c c = specific heat capacity of the substance ( [ kJ / ( kg ⋅ ∘ C ) ] [\text{kJ}/(\text{kg}\cdot^\circ\text{C})] [ kJ / ( kg ⋅ ∘ C )] or [ kJ / ( kg ⋅ K ) ] [\text{kJ}/(\text{kg}\cdot\text{K})] [ kJ / ( kg ⋅ K )] )

Δ T = T 2 − T 1 \Delta T = T_2 - T_1 Δ T = T 2 ​ − T 1 ​ = temperature change ( ∘ C ^\circ\text{C} ∘ C or K \text{K} K )

Specific Heat Capacity ( c c c )

Specific heat capacity is the amount of heat energy required to raise the temperature of 1 kg 1\text{ kg} 1 kg of a substance by 1 ∘ C 1^\circ\text{C} 1 ∘ C (or 1 K 1\text{ K} 1 K ):

Substance State Specific Heat Capacity c c c [ kJ / ( kg ⋅ ∘ C ) ] [\text{kJ}/(\text{kg}\cdot^\circ\text{C})] [ kJ / ( kg ⋅ ∘ C )]

  • Water Liquid ( 0 ∘ C − 100 ∘ C 0^\circ\text{C} - 100^\circ\text{C} 0 ∘ C − 10 0 ∘ C ) 4.187 4.187 4.187
  • Ice Solid ( − 10 ∘ C -10^\circ\text{C} − 1 0 ∘ C ) 2.090 2.090 2.090
  • Steam Vapor (at 100 ∘ C 100^\circ\text{C} 10 0 ∘ C , atmospheric) 2.010 2.010 2.010
  • Carbon Steel Solid (Boiler Plate / Pipe) 0.490 0.490 0.490
  • Cast Iron Solid 0.540 0.540 0.540
  • Copper Solid 0.385 0.385 0.385
  • Air Gas ( c p c_p c p ​ at constant pressure) 1.005 1.005 1.005

Key Exam Insight: Liquid water has an exceptionally high specific heat capacity ( 4.187 kJ/(kg ⋅ ∘ C) 4.187\text{ kJ/(kg}\cdot^\circ\text{C)} 4.187 kJ/(kg ⋅ ∘ C) ), which is more than eight times that of carbon steel. This high thermal storage capability makes water an ideal heat transfer fluid in power boilers, central heating, and district energy loops.

4. Latent Heat and Phase Changes

Latent heat is heat energy absorbed or released by a substance during an isothermal change of state (phase) at constant pressure, during which the temperature remains strictly constant. "Latent" means hidden, because no thermometer detects a temperature rise while phase change is underway.

Instead of raising molecular velocity (temperature), latent heat supplies the energy required to overcome intermolecular bonds and alter the molecular arrangement: Q = m L Q = m L Q = m L

Where:

  • Q Q Q = latent heat transferred ( kJ \text{kJ} kJ )
  • m m m = mass undergoing phase change ( kg \text{kg} kg )

L L L = specific latent heat ( h i f h_{if} h i f ​ or h f g h_{fg} h f g ​ ) of the substance ( kJ/kg \text{kJ/kg} kJ/kg ) LATENT HEAT OF FUSION (334 kJ/kg)

  • Ice at 0°C <=========================> Water at 0°C
  • Melting (+) / Freezing (-)
  • LATENT HEAT OF VAPORIZATION (2257 kJ/kg)
  • Water at 100°C <========================> Steam at 100°C
  • Boiling (+) / Condensing (-)
  • Primary Latent Heats of Water (at Atmospheric Pressure 101.325 kPa 101.325\text{ kPa} 101.325 kPa )

Latent Heat of Fusion ( h i f h_{if} h i f ​ ): The energy required to melt 1 kg 1\text{ kg} 1 kg of ice at 0 ∘ C 0^\circ\text{C} 0 ∘ C into liquid water at 0 ∘ C 0^\circ\text{C} 0 ∘ C (or released when water freezes at 0 ∘ C 0^\circ\text{C} 0 ∘ C ): h i f = 334 kJ/kg h_{if} = 334\text{ kJ/kg} h i f ​ = 334 kJ/kg

Latent Heat of Vaporization ( h f g h_{fg} h f g ​ ): The energy required to convert 1 kg 1\text{ kg} 1 kg of saturated liquid water at 100 ∘ C 100^\circ\text{C} 10 0 ∘ C into dry saturated steam at 100 ∘ C 100^\circ\text{C} 10 0 ∘ C (or released when steam condenses): h f g = 2257 kJ/kg h_{fg} = 2257\text{ kJ/kg} h f g ​ = 2257 kJ/kg

Notice that the latent heat of vaporization is nearly seven times greater than the latent heat of fusion. This explains why steam carries immense energy per unit mass and why a steam burn causes vastly more tissue destruction than a liquid water burn at the same temperature.

5. Thermal Expansion of Solids: Linear Expansion

When a solid absorbs thermal energy, its molecules vibrate with greater amplitude, increasing the mean equilibrium distance between adjacent atoms. Consequently, the solid expands in all dimensions. In long, slender components such as steam piping, boiler firetubes, and waterwall risers, the longitudinal expansion is paramount.

Linear Expansion Formula Δ L = L 0 α Δ T = L 0 α ( T 2 − T 1 ) \Delta L = L_0 \alpha \Delta T = L_0 \alpha (T_2 - T_1) Δ L = L 0 ​ α Δ T = L 0 ​ α ( T 2 ​ − T 1 ​ )

Where:

  • Δ L \Delta L Δ L = increase in length ( m \text{m} m or mm \text{mm} mm )
  • L 0 L_0 L 0 ​ = original length at initial temperature ( m \text{m} m or mm \text{mm} mm )

α \alpha α = coefficient of linear expansion ( ∘ C − 1 ^\circ\text{C}^{-1} ∘ C − 1 or m/(m ⋅ ∘ C) \text{m/(m}\cdot^\circ\text{C)} m/(m ⋅ ∘ C) )

Δ T \Delta T Δ T = temperature rise ( T 2 − T 1 T_2 - T_1 T 2 ​ − T 1 ​ ) in ∘ C ^\circ\text{C} ∘ C or K \text{K} K

L f L_f L f ​ = final length: L f = L 0 + Δ L = L 0 ( 1 + α Δ T ) L_f = L_0 + \Delta L = L_0(1 + \alpha \Delta T) L f ​ = L 0 ​ + Δ L = L 0 ​ ( 1 + α Δ T )

  • Material Coefficient of Linear Expansion α \alpha α ( ∘ C − 1 ^\circ\text{C}^{-1} ∘ C − 1 )
  • Carbon Steel 12 × 10 − 6 12 \times 10^{-6} 12 × 1 0 − 6 ( 0.000012 0.000012 0.000012 )
  • Cast Iron 10.5 × 10 − 6 10.5 \times 10^{-6} 10.5 × 1 0 − 6 ( 0.0000105 0.0000105 0.0000105 )
  • Austenitic Stainless Steel (304/316) 17 × 10 − 6 17 \times 10^{-6} 17 × 1 0 − 6 ( 0.000017 0.000017 0.000017 )
  • Copper 16.5 × 10 − 6 16.5 \times 10^{-6} 16.5 × 1 0 − 6 ( 0.0000165 0.0000165 0.0000165 )
  • Aluminum 23 × 10 − 6 23 \times 10^{-6} 23 × 1 0 − 6 ( 0.000023 0.000023 0.000023 )
  • Invar (36% Ni-Fe Alloy) 1.2 × 10 − 6 1.2 \times 10^{-6} 1.2 × 1 0 − 6 ( 0.0000012 0.0000012 0.0000012 )
  • Engineering Consequences in Steam Plants

Steam Header Piping: A 100 m 100\text{ m} 100 m carbon steel steam line operating at 250 ∘ C 250^\circ\text{C} 25 0 ∘ C expands by over 270 mm 270\text{ mm} 270 mm (nearly 11 inches 11\text{ inches} 11 inches ). If restrained by rigid structural anchors, the thermal compressive stress developed within the pipe wall exceeds the yield strength of the steel, shearing anchor bolts, tearing pipe hangers, or fracturing valve flanges. Engineers install expansion loops (U-bends) , omega loops , bellows expansion joints , and slip-type packed expansion joints alongside sliding shoe guides to absorb thermal travel safely.

Boiler Tubes and Drums: Water-tube boiler drums are mounted to allow unhindered thermal growth. The upper steam drum is typically hung from heavy structural steel columns, while the lower mud drum rests on sliding pedestal feet or is freely suspended by the vertical riser and downcomer tube banks.

Furnace Refractory Linings: High-temperature firebrick linings expand at different rates than the external boiler casing. Ceramic expansion joints packed with compressible ceramic fiber blanket prevent wall cracking and structural deformation.

6. Bimetallic Strips in Controls & Thermostats

A bimetallic strip consists of two distinct metal strips having significantly different coefficients of linear expansion ( α \alpha α ), mechanically bonded together along their faces by brazing, riveting, or welding. Cold State (Straight):

  • +---------------------------------------+ High Expansion (e.g., Brass: α = 19 x 10^-6)
  • +---------------------------------------+ Low Expansion (e.g., Invar: α = 1.2 x 10^-6)

Heated State (Curved):

  • ( \\\ High expansion elongates more \\\ )
  • ( +---------------------------------+ )

( +---------------------------------+ ) Bends toward low-expansion metal!

Operating Principle

At ambient bonding temperature, the composite strip remains flat and straight.

When heated, the metal with the higher coefficient of expansion (e.g., brass) expands significantly more than the metal with the low coefficient (e.g., Invar).

Because the metals are rigidly bonded, the higher expansion metal is constrained from slipping and forces the entire strip to bend into an arc toward the metal with the lower coefficient .

When cooled below the reference temperature, the higher-expansion metal contracts more rapidly, causing the strip to bend in the opposite direction.

Power Engineering Applications

Thermostats: The mechanical deflection makes or breaks electrical contacts to open or close fuel solenoid valves, motorized dampers, and heating contactors.

Dial Thermometers: The bimetallic strip is wound into a continuous helical coil inside a protective thermowell. Thermal deflection rotates an axial shaft attached to a pointer needle over a calibrated dial.

Thermal Overload Relays: Motor circuit current passes through a small heater element positioned next to a bimetallic strip. Sustained overcurrent heats the strip, causing it to deflect and trip a spring-loaded latch, opening the magnetic contactor coil circuit before the motor windings overheat.

7. Volumetric Expansion of Fluids and the Anomaly of Water

Liquids and gases lack fixed structural shape and exhibit volumetric (cubical) expansion when heated: Δ V = V 0 β Δ T \Delta V = V_0 \beta \Delta T Δ V = V 0 ​ β Δ T

Where Δ V \Delta V Δ V is volume change, V 0 V_0 V 0 ​ is original volume, and β \beta β is the volumetric expansion coefficient ( ∘ C − 1 ^\circ\text{C}^{-1} ∘ C − 1 ). For isotropic solids, β ≈ 3 α \beta \approx 3\alpha β ≈ 3 α . For liquids, β \beta β is vastly larger than for solids (e.g., boiler water β ≈ 0.0006 / ∘ C \beta \approx 0.0006/^\circ\text{C} β ≈ 0.0006 / ∘ C at operating temperatures; fuel oil β ≈ 0.0008 / ∘ C \beta \approx 0.0008/^\circ\text{C} β ≈ 0.0008 / ∘ C ).

The Thermodynamic Anomaly of Water

Pure water exhibits an anomalous density characteristic between 0 ∘ C 0^\circ\text{C} 0 ∘ C and 4 ∘ C 4^\circ\text{C} 4 ∘ C :

As liquid water is warmed from 0 ∘ C 0^\circ\text{C} 0 ∘ C to 3.98 ∘ C 3.98^\circ\text{C} 3.9 8 ∘ C (approx. 4 ∘ C 4^\circ\text{C} 4 ∘ C ), it contracts in volume, reaching its maximum density of 1000 kg/m 3 1000\text{ kg/m}^3 1000 kg/m 3 ( 1.000 g/cm 3 1.000\text{ g/cm}^3 1.000 g/cm 3 ) at 4 ∘ C 4^\circ\text{C} 4 ∘ C .

Above 4 ∘ C 4^\circ\text{C} 4 ∘ C , water expands normally with rising temperature.

When liquid water at 0 ∘ C 0^\circ\text{C} 0 ∘ C freezes into solid ice at 0 ∘ C 0^\circ\text{C} 0 ∘ C , the water molecules rearrange into an open hexagonal crystalline lattice, expanding in volume by approximately 9 % 9\% 9% .

Plant Protection Rule: Freezing of trapped water can rupture piping and cast-iron sections; the actual pressure depends on confinement and the system’s response. Low-temperature freeze stats, automated drain valves, and glycol loops prevent this hazard.

  • 8. Worked Engineering Calculations
  • Example 1: Total Heat Required for Ice to Steam Conversion

Problem: Calculate the total thermal energy in kilojoules ( kJ \text{kJ} kJ ) required to convert 6 kg 6\text{ kg} 6 kg of ice at − 15 ∘ C -15^\circ\text{C} − 1 5 ∘ C into dry saturated steam at atmospheric pressure ( 100 ∘ C 100^\circ\text{C} 10 0 ∘ C , 101.325 kPa 101.325\text{ kPa} 101.325 kPa ).

Given Constants:

Specific heat of ice: c ice = 2.09 kJ/(kg ⋅ ∘ C) c_{\text{ice}} = 2.09\text{ kJ/(kg}\cdot^\circ\text{C)} c ice ​ = 2.09 kJ/(kg ⋅ ∘ C)

Latent heat of fusion of ice: h i f = 334 kJ/kg h_{if} = 334\text{ kJ/kg} h i f ​ = 334 kJ/kg

Specific heat of water: c w = 4.187 kJ/(kg ⋅ ∘ C) c_w = 4.187\text{ kJ/(kg}\cdot^\circ\text{C)} c w ​ = 4.187 kJ/(kg ⋅ ∘ C)

Latent heat of vaporization of water: h f g = 2257 kJ/kg h_{fg} = 2257\text{ kJ/kg} h f g ​ = 2257 kJ/kg

Step-by-Step Solution:

Sensible heat to warm ice from − 15 ∘ C -15^\circ\text{C} − 1 5 ∘ C to 0 ∘ C 0^\circ\text{C} 0 ∘ C : Q 1 = m c ice Δ T 1 = ( 6 kg ) × ( 2.09 kJ/(kg ⋅ ∘ C) ) × ( 0 − ( − 15 ) ) ∘ C Q_1 = m c_{\text{ice}} \Delta T_1 = (6\text{ kg}) \times (2.09\text{ kJ/(kg}\cdot^\circ\text{C)}) \times (0 - (-15))^\circ\text{C} Q 1 ​ = m c ice ​ Δ T 1 ​ = ( 6 kg ) × ( 2.09 kJ/(kg ⋅ ∘ C) ) × ( 0 − ( − 15 ) ) ∘ C Q 1 = 6 × 2.09 × 15 = 188.1 kJ Q_1 = 6 \times 2.09 \times 15 = 188.1\text{ kJ} Q 1 ​ = 6 × 2.09 × 15 = 188.1 kJ

Latent heat of fusion to melt ice at 0 ∘ C 0^\circ\text{C} 0 ∘ C into liquid water at 0 ∘ C 0^\circ\text{C} 0 ∘ C : Q 2 = m h i f = ( 6 kg ) × ( 334 kJ/kg ) = 2004.0 kJ Q_2 = m h_{if} = (6\text{ kg}) \times (334\text{ kJ/kg}) = 2004.0\text{ kJ} Q 2 ​ = m h i f ​ = ( 6 kg ) × ( 334 kJ/kg ) = 2004.0 kJ

Sensible heat to heat liquid water from 0 ∘ C 0^\circ\text{C} 0 ∘ C to boiling point ( 100 ∘ C 100^\circ\text{C} 10 0 ∘ C ): Q 3 = m c w Δ T 2 = ( 6 kg ) × ( 4.187 kJ/(kg ⋅ ∘ C) ) × ( 100 − 0 ) ∘ C Q_3 = m c_w \Delta T_2 = (6\text{ kg}) \times (4.187\text{ kJ/(kg}\cdot^\circ\text{C)}) \times (100 - 0)^\circ\text{C} Q 3 ​ = m c w ​ Δ T 2 ​ = ( 6 kg ) × ( 4.187 kJ/(kg ⋅ ∘ C) ) × ( 100 − 0 ) ∘ C Q 3 = 6 × 4.187 × 100 = 2512.2 kJ Q_3 = 6 \times 4.187 \times 100 = 2512.2\text{ kJ} Q 3 ​ = 6 × 4.187 × 100 = 2512.2 kJ

Latent heat of vaporization to vaporize water at 100 ∘ C 100^\circ\text{C} 10 0 ∘ C into dry saturated steam at 100 ∘ C 100^\circ\text{C} 10 0 ∘ C : Q 4 = m h f g = ( 6 kg ) × ( 2257 kJ/kg ) = 13542.0 kJ Q_4 = m h_{fg} = (6\text{ kg}) \times (2257\text{ kJ/kg}) = 13542.0\text{ kJ} Q 4 ​ = m h f g ​ = ( 6 kg ) × ( 2257 kJ/kg ) = 13542.0 kJ

Total heat required ( Q total Q_{\text{total}} Q total ​ ): Q total = Q 1 + Q 2 + Q 3 + Q 4 = 188.1 + 2004.0 + 2512.2 + 13542.0 = 18246.3 kJ Q_{\text{total}} = Q_1 + Q_2 + Q_3 + Q_4 = 188.1 + 2004.0 + 2512.2 + 13542.0 = 18246.3\text{ kJ} Q total ​ = Q 1 ​ + Q 2 ​ + Q 3 ​ + Q 4 ​ = 188.1 + 2004.0 + 2512.2 + 13542.0 = 18246.3 kJ

Example 2: Steam Header Piping Expansion Calculation

Problem: A carbon steel main steam header measures 75 m 75\text{ m} 75 m in length when installed at an ambient plant temperature of 18 ∘ C 18^\circ\text{C} 1 8 ∘ C . During winter peak operation, the header conveys saturated steam at an operating temperature of 245 ∘ C 245^\circ\text{C} 24 5 ∘ C . Taking the coefficient of linear expansion for carbon steel as α = 0.000012 / ∘ C \alpha = 0.000012/^\circ\text{C} α = 0.000012 / ∘ C ( 12 × 10 − 6 / ∘ C 12 \times 10^{-6}/^\circ\text{C} 12 × 1 0 − 6 / ∘ C ), calculate:

The axial elongation of the steam header in millimeters.

The total operating length of the pipe at 245 ∘ C 245^\circ\text{C} 24 5 ∘ C .

Step-by-Step Solution:

Determine the temperature change ( Δ T \Delta T Δ T ): Δ T = T operating − T ambient = 245 ∘ C − 18 ∘ C = 227 ∘ C \Delta T = T_{\text{operating}} - T_{\text{ambient}} = 245^\circ\text{C} - 18^\circ\text{C} = 227^\circ\text{C} Δ T = T operating ​ − T ambient ​ = 24 5 ∘ C − 1 8 ∘ C = 22 7 ∘ C

Calculate axial elongation ( Δ L \Delta L Δ L ): Δ L = L 0 α Δ T = ( 75 m ) × ( 0.000012 / ∘ C ) × ( 227 ∘ C ) \Delta L = L_0 \alpha \Delta T = (75\text{ m}) \times (0.000012/^\circ\text{C}) \times (227^\circ\text{C}) Δ L = L 0 ​ α Δ T = ( 75 m ) × ( 0.000012 / ∘ C ) × ( 22 7 ∘ C ) Δ L = 0.2043 m \Delta L = 0.2043\text{ m} Δ L = 0.2043 m Δ L = 0.2043 m × 1000 mm/m = 204.3 mm \Delta L = 0.2043\text{ m} \times 1000\text{ mm/m} = 204.3\text{ mm} Δ L = 0.2043 m × 1000 mm/m = 204.3 mm

Calculate final operating length ( L f L_f L f ​ ): L f = L 0 + Δ L = 75.0 m + 0.2043 m = 75.2043 m L_f = L_0 + \Delta L = 75.0\text{ m} + 0.2043\text{ m} = 75.2043\text{ m} L f ​ = L 0 ​ + Δ L = 75.0 m + 0.2043 m = 75.2043 m

Practical Engineering Note: The piping designer must provide expansion loops or flexible joints capable of absorbing at least 204.3 mm 204.3\text{ mm} 204.3 mm of axial travel with the flexibility, anchor-load and fatigue provisions required by the applicable design to prevent pipe deformation and excessive flange loading.

Source notes

Official scope and technical references checked 2026-10-17: Reference 1 ; Reference 2 . Archived DOE handbooks are used for physical principles, not current Canadian legal requirements.