Study guide

3.1 Skeletal Architecture, Joint Classifications & Arthrokinematics

RMT Clinical Knowledge and Theory CKT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Health History, Clinical Reasoning & Red Flags

1.1 Patient Health History & Interviewing 1.2 Red Flags, Yellow Flags & Emergency Referrals 1.3 Systemic Contraindications & Pharmacological Considerations

2 Chapter 2: Infection Prevention, Clinical Safety & Professional Hygiene

2.1 Routine Practices & Infection Control in Healthcare 2.2 Communicable Diseases & Dermatological Manifestations 2.3 Clinical Ergonomics & Body Mechanics for Therapists

3 Chapter 3: Foundational Health Sciences — Musculoskeletal Anatomy & Biomechanics

3.1 Skeletal Architecture, Joint Classifications & Arthrokinematics 3.2 Head, Neck & Trunk Myology and Biomechanics 3.3 Upper Extremity Myology & Scapulohumeral Rhythm 3.4 Lower Extremity Myology & Pelvifemoral Mechanics

4 Chapter 4: Foundational Health Sciences — Neuroanatomy & Pain Physiology

4.1 Nervous System Organization & Peripheral Nerve Pathways 4.2 Neurological Assessment: Dermatomes, Myotomes & Reflexes 4.3 Pain Neurobiology, Sensitization & Pain Management

5 Chapter 5: Foundational Health Sciences — Tissue Healing & Systemic, Neurological and Visceral Pathology

5.1 Tissue Injury, Inflammation & Healing Stages 5.2 Cardiovascular & Lymphatic Pathology 5.3 Respiratory & Immune System Pathology 5.4 Endocrine, Metabolic & Bone Disorders 5.5 Neurological Conditions of the Central & Peripheral Nervous System 5.6 Digestive, Urinary & Reproductive System Conditions

6 Chapter 6: Clinical Examination — Posture, Gait, Palpation & Vital Signs

6.1 Postural Assessment & Structural Deviations 6.2 Gait Analysis & Pathological Gait Patterns 6.3 Palpatory Examination & Tissue Texture Abnormalities 6.4 Vital Signs, Clinical Observation & Functional (ADL) Assessment

7 Chapter 7: Clinical Examination — Range of Motion & End-Feel Assessment

7.1 Active, Passive & Resisted Range of Motion Principles 7.2 Joint End-Feels: Normal & Pathological 7.3 Capsular Patterns of Major Joints

8 Chapter 8: Orthopedic Special Tests — Spine & Pelvis

8.1 Cervical Spine & Thoracic Outlet Syndrome Tests 8.2 Lumbar Spine & Neurological Compression Tests 8.3 Sacroiliac Joint & Pelvic Girdle Tests

9 Chapter 9: Orthopedic Special Tests — Extremities

9.1 Shoulder Complex Special Tests 9.2 Elbow, Forearm & Wrist Special Tests 9.3 Hand, Carpal & Compression Tests 9.4 Hip, Knee, Ankle & Foot Special Tests

10 Chapter 10: Clinical Pathology & Musculoskeletal Conditions

10.1 Peripheral Nerve Entrapment Syndromes 10.2 Tendinopathies & Overuse Syndromes 10.3 Joint Dysfunctions, Degenerative & Ligamentous Pathology 10.4 Chronic Pain Syndromes, Whiplash & Central Sensitivity

11 Chapter 11: Treatment Principles & Clinical Planning

11.1 Clinical Decision-Making & Treatment Planning 11.2 Informed Consent, Professional Boundaries, Positioning & Draping 11.3 Treatment Modifications for Systemic Conditions & Special Populations 11.4 Clinical Documentation, SOAP Notes & Discharge Planning 11.5 Post-Surgical Conditions, Implanted Devices & Ostomies 11.6 Stages of Life, Mental Health & Trauma-Informed Care 11.7 Patient Transfers, Assisted Dressing & Mobility Aids

12 Chapter 12: Massage Techniques & Manual Modalities

12.1 Swedish Massage Techniques & Hemodynamic Effects 12.2 Myofascial Release & Connective Tissue Techniques 12.3 Neuromuscular Therapy & Trigger Point Deactivation 12.4 Joint Mobilization & Manual Lymph Drainage

13 Chapter 13: Therapeutic & Remedial Exercise

13.1 Stretching Principles & Neurophysiological Flexibility Training 13.2 Therapeutic Strengthening & Neuromuscular Re-education 13.3 Functional Spinal & Core Stabilization Exercise 13.4 Patient Home-Care Prescription & Ergonomic Self-Care 13.5 Range-of-Motion, Cardiovascular, Proprioceptive & Breathing Exercise

14 Chapter 14: Thermal Applications & Hydrotherapy

14.1 Cryotherapy: Physiological Mechanisms, Applications & Stages 14.2 Thermotherapy: Physiological Mechanisms & Modalities 14.3 Contrast Therapy, Vascular Rhythms & Safety Precautions

3.1 Skeletal Architecture, Joint Classifications & Arthrokinematics

Key Takeaways Explain This Topic AI

Bone remodeling balances osteoblastic matrix synthesis with osteoclastic resorption, dynamically reorganizing trabecular architecture in response to mechanical strain in accordance with Wolff's law.

Articulations are categorized structurally as fibrous, cartilaginous, or synovial, and functionally as synarthroses, amphiarthroses, or diarthroses, with synovial joints providing primary human mobility through six mechanical sub-types.

The convex-concave rule dictates that when a convex articular surface moves on a fixed concave surface, roll and slide occur in opposite directions; when a concave surface moves on a fixed convex surface, roll and slide occur in the same direction.

Close-packed positions maximize articular congruency and ligamentous tension to enhance joint stability under load, whereas loose-packed (resting) positions optimize joint volume and allow passive accessory motion and joint mobilization.

A capsular pattern represents a predictable, proportional limitation of passive range of motion characteristic of global joint capsule inflammation or progressive capsular fibrosis.

Last updated: October 2026

Skeletal Architecture, Joint Classifications & Arthrokinematics

Understanding the structural architecture of the skeletal system and the mechanical rules governing joint motion is fundamental to orthopedic physical assessment, clinical reasoning, and manual therapy intervention. Registered Massage Therapists (RMTs) evaluate bone landmarks, assess joint mobility, identify restrictions, and apply targeted joint mobilizations based on these core biomechanical principles.

1. Bone Tissue Biology and Osseous Remodeling

Bone is a dynamic, highly vascularized connective tissue undergoing continuous metabolic turnover and structural remodeling throughout life. It serves vital mechanical functions—providing a rigid structural framework, protecting internal organs, and serving as levers for skeletal muscle action—as well as physiological functions, including mineral homeostasis (calcium and phosphate storage) and hematopoiesis.

Cellular Components of Bone

Bone tissue homeostasis relies on the coordinated activity of four specialized cell types:

Osteoprogenitor Cells: Unspecialized mesenchymal stem cells located in the inner layer of the periosteum, the endosteum, and the vascular canals. They undergo mitotic division to differentiate into osteoblasts in response to chemical and mechanical signals.

Osteoblasts: Bone-forming cells that synthesize and secrete the organic components of the bone matrix ( osteoid ), primarily composed of type I collagen fibers and ground substance (glycosaminoglycans and proteoglycans). Osteoblasts also secrete alkaline phosphatase, an enzyme essential for initiating calcium and phosphate precipitation to mineralize the osteoid.

Osteocytes: Mature bone cells derived from osteoblasts that have become entrapped within mineralized matrix chambers called lacunae . Osteocytes maintain extensive communication networks with neighboring cells via cytoplasmic processes passing through microscopic fluid-filled canals termed canaliculi . Osteocytes function as primary mechanosensors: they detect mechanical strain, fluid shear stress, and microdamage within bone, releasing biochemical signaling molecules (such as sclerostin and nitric oxide) that direct osteoclasts and osteoblasts to initiate targeted remodeling.

Osteoclasts: Large, multinucleated giant cells derived from the monocyte-macrophage hematopoietic lineage. Located in shallow resorption depressions on bone surfaces ( Howship's lacunae ), osteoclasts seal off a microenvironment beneath their ruffled borders and secrete hydrochloric acid (dissolving inorganic calcium hydroxyapatite) and lysosomal enzymes like cathepsin K (degrading organic collagen). This process releases calcium and phosphate into systemic circulation.

Extracellular Matrix Architecture

The bone matrix is a composite material optimized for both tensile strength and compressive resistance:

Organic Component (Osteoid ~35% dry weight): Composed predominantly of type I collagen fibers arranged in parallel sheets. Provides flexibility, elasticity, and high tensile strength, preventing bone from becoming brittle.

Inorganic Component (~65% dry weight): Composed of crystallized mineral salts, primarily calcium hydroxyapatite [ C a 10 ( P O 4 ) 6 ( O H ) 2 Ca_{10}(PO_4)_6(OH)_2 C a 10 ​ ( P O 4 ​ ) 6 ​ ( O H ) 2 ​ ], with incorporated calcium carbonate, magnesium, and sodium. Mineral crystals deposit along collagen fibrils, providing extraordinary compressive stiffness and hardness.

Compact (Cortical) vs. Cancellous (Trabecular) Bone

Bone tissue is organized into two structural varieties that differ in density, porosity, and metabolic rate:

  • Characteristic Compact (Cortical) Bone Cancellous (Trabecular / Spongy) Bone
  • Structural Unit Osteon (Haversian System) Interconnecting Trabeculae (Pores)
  • Porosity & Density Dense and solid; 5% to 10% porosity Porous lattice; 50% to 90% porosity
  • Skeletal Mass ~80% of total adult skeleton mass ~20% of total adult skeleton mass
  • Surface Area Smaller surface-to-volume ratio Much larger surface-to-volume ratio (~10× cortical)
  • Metabolic Turnover Slower metabolic and remodeling rate Rapid remodeling; high metabolic activity
  • Vascular Architecture Haversian & Volkmann canals Direct diffusion from marrow sinusoidal capillaries

Primary Mechanical Role Resists bending, torsion, and longitudinal shear Absorbs shock, distributes compressive loads

Primary Locations Diaphysis of long bones; outer cortex of all bones Epiphyses/metaphyses of long bones; vertebrae; pelvis

In compact bone, concentric lamellae surround a central Haversian canal containing blood vessels and nerve fibers. Perpendicular Volkmann's (perforating) canals connect Haversian canals to each other and to the outer vascularized periosteum . Cancellous bone consists of a three-dimensional network of branching bony struts ( trabeculae ) aligned precisely along lines of internal mechanical stress, with intervening spaces filled with red or yellow bone marrow.

Wolff's Law of Bone Remodeling

Wolff's Law , formulated by German anatomist and surgeon Julius Wolff, states that bone adapts structurally to the mechanical loads under which it is placed . When mechanical loading on a bone increases, the bone remodels over time to become thicker, denser, and stronger along the primary vectors of force. Conversely, when mechanical loading decreases, bone mass is resorbed through increased osteoclastic activity relative to osteoblastic synthesis, resulting in osteopenia or osteoporosis. Mechanical Loading / Strain Applied

  • │
  • ▼
  • Fluid Shear Stress in Canaliculi Detected by Osteocytes
  • │
  • ▼
  • Downregulation of Sclerostin & Activation of Wnt/β-Catenin Pathway
  • │
  • ▼
  • Osteoblast Recruitment & Targeted Osteoid Mineralization
  • │
  • ▼
  • Increased Trabecular Density & Cortical Bone Hypertrophy along Stress Lines

Clinical RMT Relevance:

Immobilization & Disuse: Prolonged bed rest, joint immobilization in a rigid cast, or sedentary lifestyle induces rapid local bone loss and ligamentous weakening. During post-fracture or post-cast rehabilitation, therapists must recognize that remobilizing tissues have reduced structural tolerances and require progressive, graded loading.

Weight-Bearing Exercise: RMTs prescribe weight-bearing remedial exercise (such as walking, resistance training, and closed-chain stabilization) to stimulate osteocytic mechanotransduction, preserving bone mineral density in aging populations and individuals at risk for osteoporosis.

Manual Loading Limits: Deep, heavy pressure or forceful mobilization over osteoporotic rib cages or osteopenic femoral necks is contraindicated due to the heightened risk of pathological fracture. (High-velocity thrust manipulation is outside massage therapy scope in BC in any case.)

2. Structural and Functional Joint Classifications

An articulation (joint) is the junction where two or more bones or cartilaginous structures meet. Joints are classified according to their degree of movement ( functional classification ) and their anatomical binding material ( structural classification ).

Functional Classification

Synarthrosis: Immovable joint providing maximum structural stability and protection (e.g., cranial sutures).

Amphiarthrosis: Slightly movable joint balancing shock absorption with minor multiplanar compliance (e.g., pubic symphysis, intervertebral discs).

Diarthrosis: Freely movable joint permitting expansive range of motion; all diarthrodial joints are structurally classified as synovial joints.

  • Structural Classification
  • A. Fibrous Joints

Bones are united directly by dense fibrous connective tissue rich in collagen fibers, with no intervening joint cavity.

Suture: Thin layer of dense fibrous tissue uniting interlocking bones of the skull (e.g., coronal suture). Completely immovable in adults (synarthrosis); fibrous sutures eventually ossify into bony synostoses .

Syndesmosis: Bones are bound by greater lengths of dense fibrous tissue organized as an interosseous membrane or ligament, permitting minor yielding movement (amphiarthrosis). Key clinical examples: the inferior tibiofibular syndesmosis (site of "high ankle sprains") and the radioulnar interosseous membrane .

Gomphosis: Peg-in-socket fibrous joint where the root of a tooth is anchored into its alveolar socket by the periodontal ligament (synarthrosis).

B. Cartilaginous Joints

Bones are united by hyaline cartilage or fibrocartilage, lacking a synovial joint cavity.

Synchondrosis (Primary Cartilaginous): Bones are united purely by hyaline cartilage. Usually temporary joints that ossify with skeletal maturity, such as the epiphyseal growth plates of growing long bones and the spheno-occipital synchondrosis. The first sternocostal joint (between the first rib and the manubrium of the sternum) remains a permanent synchondrosis, providing a rigid anchor for thoracic stability.

Symphysis (Secondary Cartilaginous): Articular surfaces are covered by a thin layer of hyaline cartilage, which in turn is bonded to a resilient, compressible intervening pad of fibrocartilage . Symphyses occur in the skeletal midline, functioning as shock-absorbing amphiarthroses. Examples include the pubic symphysis and the intervertebral discs .

C. Synovial Joints (Diarthroses)

Characterized by the presence of a fluid-filled joint cavity separating the articulating bones, conferring low friction and wide ranges of movement. Synovial Joint Key Anatomical Structures:

  • ┌────────────────────────────────────────────────────────┐
  • │ Articular (Hyaline) Cartilage │
  • │ - Avascular, aneural, low-friction bearing surface │
  • │ - Relies on synovial fluid imbibition during loading │
  • ├────────────────────────────────────────────────────────┤
  • │ Joint Capsule (Articular Capsule) │
  • │ - Outer Fibrous Layer: Dense irregular collagen, │
  • │ continuous with periosteum, richly innervated with │
  • │ mechanoreceptors and nociceptors (pain & position) │
  • │ - Inner Synovial Membrane: Vascularized layer of │
  • │ synoviocytes producing synovial fluid │
  • ├────────────────────────────────────────────────────────┤
  • │ Synovial Fluid │
  • │ - Viscous fluid rich in hyaluronic acid & lubricin │
  • │ - Nourishes chondrocytes and lubricates surfaces │
  • ├────────────────────────────────────────────────────────┤
  • │ Accessory Structures │
  • │ - Ligaments (intracapsular & extracapsular) │
  • │ - Fibrocartilage Discs/Menisci (improve congruence) │
  • │ - Bursae and Fat Pads (minimize mechanical friction) │
  • └────────────────────────────────────────────────────────┘
  • Synovial Joint Mechanical Subtypes

Synovial Subtype Mechanical Axes Degrees of Freedom Primary Kinematic Actions Clinical & Anatomical Examples

Hinge (Ginglymus) Uniaxial 1 Flexion / Extension Humeroulnar joint (elbow), Interphalangeal (PIP & DIP) joints, Talocrural joint

Pivot (Trochoid) Uniaxial 1 Rotation around a longitudinal axis Median atlantoaxial joint ( C 1 – C 2 C1\text{--}C2 C 1 – C 2 ), Proximal & distal radioulnar joints

Condyloid (Ellipsoid) Biaxial 2 Flexion / Extension, Abduction / Adduction, Circumduction Radiocarpal joint (wrist), Metacarpophalangeal (MCP) joints 2–5, Atlanto-occipital joint ( C 0 – C 1 C0\text{--}C1 C 0 – C 1 )

Saddle (Sellar) Biaxial 2 (+ conjunct axial rotation) Flexion / Extension, Abduction / Adduction, Opposition 1st Carpometacarpal (CMC) joint of thumb (trapeziometacarpal), Sternoclavicular (SC) joint

Ball-and-Socket (Spheroid) Triaxial / Multiaxial 3 Flexion / Extension, Abduction / Adduction, Internal / External Rotation, Circumduction Glenohumeral (shoulder) joint, Acetabulofemoral (hip) joint

Planar (Gliding / Arthrodial) Nonaxial Variable translational sliding Sliding / gliding between flat or slightly curved surfaces Zygapophyseal (facet) joints of spine, Intercarpal joints, Intertarsal joints, Acromioclavicular (AC) joint

3. Arthrokinematics and the Convex-Concave Rule

Clinical movement analysis requires distinguishing between osteokinematic motion and arthrokinematic motion:

Osteokinematics: Gross movement of bones in space relative to cardinal anatomical planes (flexion, extension, abduction, adduction, internal rotation, external rotation). Osteokinematic movement is voluntary and measured clinically using a goniometer.

Arthrokinematics: Involuntary, microscopic accessory motion taking place between the articular surfaces within the joint capsule (joint play). These movements include roll , slide (glide) , and spin .

The Three Arthrokinematic Motions

Roll: Multiple points along one moving articular surface contact multiple consecutive points on the opposing articular surface, analogous to a tire rolling along a road. The direction of articular rolling always occurs in the exact same direction as the moving bone's osteokinematic swing , regardless of whether the moving surface is convex or concave.

Slide (Glide): A single point on one moving articular surface contacts multiple new points on the opposing articular surface, analogous to a locked tire skidding on ice. Pure slide can only occur between completely congruent, flat surfaces.

Spin: A single point on one articular surface rotates around a stationary longitudinal mechanical axis on a single point of the opposing surface, analogous to a spinning top. Key clinical examples: the radial head spinning on the capitulum of the humerus during forearm pronation/supination, and the femoral head spinning during hip flexion/extension.

In natural human movement, pure rolling would quickly cause the moving bone to compress the opposing joint margin and dislocate. Normal physiologic joint motion requires a concurrent combination of roll and slide to maintain joint centration within the articular socket.

The Convex-Concave Rule (Kaltenborn Principles)

The relationship between roll and slide is governed by the curvature of the articulating partners: CONVEX-ON-CONCAVE RULE:

Moving partner is CONVEX, stationary partner is CONCAVE.

Roll and Slide occur in OPPOSITE directions.

  • Bone Swing (Osteokinematics): ▲ [Superior]
  • Articular Roll: ▲ [Superior]
  • Articular Slide (Glide): ▼ [Inferior]

CONCAVE-ON-CONVEX RULE:

Moving partner is CONCAVE, stationary partner is CONVEX.

Roll and Slide occur in the SAME direction.

  • Bone Swing (Osteokinematics): ▲ [Anterior]
  • Articular Roll: ▲ [Anterior]
  • Articular Slide (Glide): ▲ [Anterior]
  • 1. Convex Moving on Concave

When a convex articular surface moves on a stationary concave articular surface , the roll occurs in the same direction as bone movement, but the slide (glide) occurs in the OPPOSITE direction to the roll.

Manual Therapy Rule: To restore or increase a restricted osteokinematic motion, the therapist glides the convex joint partner in the direction opposite to the restricted bone motion.

Clinical Application — Shoulder Abduction: The convex humeral head articulates with the shallow concave glenoid fossa. During active shoulder abduction, the humerus rolls superiorly; therefore, the humeral head must slide inferiorly . If the inferior glide is restricted by tight inferior capsular tissue, the humeral head migrates superiorly, impinging the supraspinatus tendon against the coracoacromial arch. To restore shoulder abduction, the RMT applies an inferior glenohumeral glide .

2. Concave Moving on Convex

When a concave articular surface moves on a stationary convex articular surface , the roll and the slide (glide) occur in the SAME direction as the bone movement.

Manual Therapy Rule: To restore or increase a restricted osteokinematic motion, the therapist glides the concave joint partner in the same direction as the restricted bone motion.

Clinical Application — Open-Chain Knee Extension: In an open kinetic chain (such as seated leg extension), the concave tibial plateaus move on the stationary convex femoral condyles. During knee extension, the tibia swings anteriorly, rolls anteriorly, and slides anteriorly on the femoral condyles. To restore open-chain knee extension, the RMT applies an anterior tibial glide .

Joint Mobilization Clinical Application Matrix

Joint & Motion Moving Partner Stationary Partner Curvature Relationship Roll Direction Required Mobilization Glide Direction

Glenohumeral Abduction Humeral Head Glenoid Fossa Convex on Concave Superior Inferior Glide of Humeral Head

Glenohumeral Flexion / IR Humeral Head Glenoid Fossa Convex on Concave Anterior (Flex) / Medial (IR) Posterior Glide of Humeral Head

Glenohumeral Extension / ER Humeral Head Glenoid Fossa Convex on Concave Posterior (Ext) / Lateral (ER) Anterior Glide of Humeral Head

Radiocarpal Wrist Flexion Proximal Carpal Row Distal Radius Convex on Concave Palmar / Anterior Dorsal (Posterior) Glide of Carpals

Radiocarpal Wrist Extension Proximal Carpal Row Distal Radius Convex on Concave Dorsal / Posterior Palmar (Volar) Glide of Carpals

Tibiofemoral Open-Chain Ext Tibial Plateaus Femoral Condyles Concave on Convex Anterior Anterior Glide of Tibia

Tibiofemoral Open-Chain Flex Tibial Plateaus Femoral Condyles Concave on Convex Posterior Posterior Glide of Tibia

Talocrural Dorsiflexion Trochlea of Talus Mortise (Tib/Fib) Convex on Concave Anterior Posterior Glide of Talus

Talocrural Plantarflexion Trochlea of Talus Mortise (Tib/Fib) Convex on Concave Posterior Anterior Glide of Talus

  • 4. Joint Configurations and Capsular Patterns
  • Close-Packed vs. Loose-Packed (Resting) Positions

The alignment and tension of articular structures vary throughout a joint's range of motion: CLOSE-PACKED POSITION: LOOSE-PACKED (RESTING) POSITION:

  • Maximal articular congruency • Minimal articular congruency
  • Joint capsule & ligaments maximally taut • Capsule & ligaments slack / relaxed
  • Articular surfaces tightly compressed • Maximal intra-articular fluid volume
  • Involuntary joint play absent • Maximal accessory joint play available
  • Mechanically stable for heavy loading • Ideal for joint mobilization assessment

Close-Packed Position: The articular surfaces fit together with maximal surface congruency. The capsule and major stabilizing ligaments become twisted, tight, and maximally taut, locking the joint together under high compressive force. The intra-articular volume is at its absolute minimum. Joint play is virtually absent. While exceptionally stable against external forces, the joint is prone to fracture or dislocation if subjected to trauma in this position. Joint-play assessment and mobilization are not performed in the close-packed position , because accessory motion is essentially absent there.

Loose-Packed (Resting) Position: Articular surfaces are least congruent, with the joint capsule and surrounding ligaments in their most relaxed, slackened state. The joint cavity possesses its greatest internal fluid capacity, making this the position of comfort adopted spontaneously by patients presenting with acute joint effusion or inflammatory arthritis. Accessory joint play (glide, spin, traction, distraction) is maximal. All initial joint play assessments and Maitland Grade I and II mobilizations should begin in the loose-packed position .

Joint Configurations Reference Table

Joint Close-Packed Position Loose-Packed (Resting) Position

Glenohumeral Joint Full Abduction and Full External (Lateral) Rotation ~55° Abduction, 30° Horizontal Adduction (Scapular Plane)

  • Humeroulnar Joint Full Extension with Forearm Supination 70° Flexion, 10° Supination
  • Radiocarpal Joint Full Extension with Radial Deviation Neutral flexion/extension with slight Ulnar Deviation

Acetabulofemoral (Hip) Full Extension, slight Abduction, and Internal Rotation 30° Flexion, 30° Abduction, slight External Rotation

  • Tibiofemoral (Knee) Full Extension with Terminal External Rotation of Tibia 25° to 30° Flexion
  • Talocrural Joint Full Dorsiflexion 10° Plantarflexion, midway between Inversion and Eversion
  • Facet (Zygapophyseal) Full Extension Midway between Flexion and Extension
  • Capsular Patterns of Restriction

A capsular pattern is a predictable, proportional limitation of passive range of motion affecting an entire joint. It indicates the presence of a pathological process involving the entire joint capsule , such as extensive joint effusion, acute synovitis, active rheumatoid or osteoarthritis, or diffuse fibrotic capsular contracture (such as adhesive capsulitis).

When testing passive range of motion, the therapist evaluates the relative proportions of limitation rather than absolute degree values. For example, in a glenohumeral capsular pattern, external rotation is markedly restricted, abduction is moderately restricted, and internal rotation is mildly restricted.

Characteristic Capsular Patterns of Major Joints

Glenohumeral Joint: External Rotation is most limited > Abduction is moderately limited > Internal Rotation is least limited (classic ratio: ER > ABD > IR).

Acetabulofemoral (Hip) Joint: Internal Rotation is most limited > Flexion is moderately limited > Abduction is restricted > Extension is mildly restricted (classic ratio: IR > Flexion > Abduction > Extension).

Tibiofemoral (Knee) Joint: Gross limitation of Flexion with only mild limitation of Extension (e.g., 90° loss of flexion vs. 5° to 10° loss of extension).

Talocrural (Ankle) Joint: Plantarflexion is more limited than Dorsiflexion.

Humeroulnar (Elbow) Joint: Flexion is more limited than Extension (e.g., 30° loss of flexion vs. 10° loss of extension).

Cervical & Lumbar Spine: Equal limitation of lateral flexion and rotation bilaterally, followed by marked limitation of extension; flexion is relatively preserved or least limited.

Capsular vs. Non-Capsular Patterns

A non-capsular pattern represents a restriction that does not follow the predictable proportional hierarchy of the joint capsule. Non-capsular restrictions point to localized or extra-articular pathology rather than global capsular involvement:

Internal Derangement: A mechanical block within the joint cavity (such as a displaced meniscal tear in the knee or an intra-articular loose body) causing a sudden, localized restriction in one specific direction (e.g., springy block at end-range extension) while other planes remain completely free.

Isolated Ligamentous Sprain or Adhesion: Restriction and localized pain when a single, specific collateral ligament is placed on stretch, without proportional loss across other motions.

Extra-Articular Muscle Spasm or Contracture: Range is restricted solely in the direction that stretches the tight, hypertonic muscular unit (e.g., rectus femoris contracture restricting knee flexion only when the hip is extended, while knee flexion with the hip flexed remains unrestricted).