Study guide
10.4 California Payroll: Wages, Overtime, Meal and Rest Periods, and Deposits
California C-39 Roofing Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Planning, Codes, and Roofing Estimating
1.1 California Building Codes, Title 24 Energy Standards, and Plan Reading 1.2 Roof Geometry, Area Calculations, and Pitch Multipliers 1.3 Material Takeoffs, Squares, and Waste Calculations 1.4 Roof System Selection, Specifications, Permits, and Project Scheduling 1.5 Labor Production Rates, Overhead, Profit, and Roofing Bid Pricing
2 Chapter 2: Job Site Preparation and Substrate Remediation
2.1 Jobsite Protection, Material Staging, and Temporary Weatherproofing 2.2 Tear-Off Procedures, Overlay Limitations, and Hazardous Materials 2.3 Roof Deck Inspection, Substrate Preparation, and Sheathing Repairs
3 Chapter 3: Low-Slope Roof Systems — Built-Up, Modified Bitumen, and Single-Ply
3.1 Built-Up Roofing (BUR) Systems, Felts, and Hot Bitumen Application 3.2 Modified Bitumen Membrane Systems (APP vs. SBS) and Installation 3.3 Single-Ply Roofing Membranes (TPO, PVC, EPDM) and Seaming Methods
4 Chapter 4: Low-Slope Roof Systems — SPF, Coatings, Flashings, and Maintenance
4.1 Spray Polyurethane Foam (SPF) and Liquid-Applied Protective Coatings 4.2 Low-Slope Drainage, Perimeters, Penetration Flashings, and Scuppers 4.3 Low-Slope Diagnostics, Blister Repairs, and Preventative Maintenance
5 Chapter 5: Steep-Slope Roofing — Flashing, Underlayment, and Ventilation
5.1 Steep-Slope Underlayments, Felt Grades, and Self-Adhering Ice/Water Barriers 5.2 Flashing Details: Valleys, Drip Edges, Step Flashing, Aprons, and Crickets 5.3 Attic and Roof Ventilation: NFVA Requirements, Vent Types, and Airflow Balance
6 Chapter 6: Steep-Slope Roofing — Materials, Installation, and Repair
6.1 Asphalt Shingle Installation, Fastening Patterns, and Wind/Slope Requirements 6.2 Concrete and Clay Tile Roofing (TRI Standards, Battens, and Fastening) 6.3 Standing Seam Metal Panels, Wood Shakes, Slate, and Steep-Slope Repairs 6.4 Steep-Slope Leak Diagnosis, Targeted Repairs, and the Repair-or-Replace Decision
7 Chapter 7: California Roofing Safety — Cal/OSHA, Fall Protection, and Hazards
7.1 Cal/OSHA Fall Protection: Residential Roofing (§1731), Roof Hazards (§1730), and PFAS 7.2 Cal/OSHA Ladder Safety, Scaffold Erection, and Power Line Clearance 7.3 Heat Illness Prevention (CCR §3395), Hot Asphalt Safety, and Personnel PPE 7.4 Injury and Illness Prevention Program, Safety Training, Recordkeeping, and Cal/OSHA Reporting 7.5 Hazard Communication, Asbestos, Lead, and Silica: Managing Unknown Materials
8 Chapter 8: CSLB Licensing Law and Business Organization
8.1 CSLB Licensing Classifications, Bond Requirements, and License Law 8.2 Business Entity Choice, Personnel of Record, and Qualifier Responsibilities 8.3 Advertising Rules, Home Improvement Salespersons, and Subcontracting
9 Chapter 9: Business Finances, Financial Reporting, and Taxes
9.1 Cash Management, Job Costing, and Working Capital 9.2 Budgeting, Business Planning, and Break-Even Analysis 9.3 Financial Reporting: Statements, Accounting Methods, and Key Ratios 9.4 Federal and California Taxes for Roofing Contractors
10 Chapter 10: Employment Requirements, Supervision, and Payroll
10.1 Hiring: Worker Classification, Verification, and New-Hire Reporting 10.2 Supervising and Training Employees 10.3 Performance Evaluation, Personnel Records, and Termination 10.4 California Payroll: Wages, Overtime, Meal and Rest Periods, and Deposits
11 Chapter 11: Insurance, Bonds, and Payment Remedies
11.1 Workers' Compensation Insurance for California Roofing Contractors 11.2 Business Insurance and Surety Bonds 11.3 California Mechanics Lien Law, 20-Day Preliminary Notices, and Lien Waivers
12 Chapter 12: Contract Requirements, Bidding, and Project Execution
12.1 California Roofing Contracts, Home Improvement Law (B&P §7159), and Warranties 12.2 Bidding Practices, Bid Documents, and Competitive Bidding Law 12.3 Job Cost Control and Change Order Management 12.4 Project Organization, Scheduling, and Documentation 12.5 Payments: Progress Payments, Retention, and California Prompt Payment Law
13 Chapter 13: Public Works Roofing Projects
13.1 Prevailing Wage, DIR Registration, and Certified Payroll 13.2 Public Works Bonding and Insurance Requirements
10.4 California Payroll: Wages, Overtime, Meal and Rest Periods, and Deposits
Key Takeaways Explain This Topic AI
California pays overtime daily as well as weekly: time and one-half over 8 hours in a workday or 40 hours in a workweek, and double time over 12 hours in a workday.
On the seventh consecutive day of work in a workweek, the first 8 hours are paid at time and one-half and all hours beyond 8 are paid at double time.
A non-exempt employee is entitled to an unpaid 30-minute meal period for a shift over 5 hours and a second meal period for a shift over 10 hours, plus a paid 10-minute rest period for each 4 hours worked or major fraction thereof.
Missing a required meal period or rest period obligates the employer to pay one additional hour of pay at the employee's regular rate for each workday the break was not provided, up to one hour for meal periods and one for rest periods per day.
California paid sick leave requires accrual of at least 1 hour for every 30 hours worked, with employers required to provide at least 40 hours or 5 days per year.
Last updated: September 2026
California Payroll: Wages, Overtime, Meal and Rest Periods, and Deposits
Quick Answer: California overtime is daily , not just weekly: time and one-half over 8 hours in a workday or 40 in a workweek , and double time over 12 hours in a workday . On the seventh consecutive day in a workweek, the first 8 hours are at time and one-half and everything past 8 is double time . A shift over 5 hours earns an unpaid 30-minute meal period ; over 10 hours , a second one. Every 4 hours or major fraction earns a paid 10-minute rest period . Miss a meal or rest period and the employer owes one additional hour of pay at the regular rate per workday, per category. The statewide minimum wage is $16.90 per hour effective January 1, 2026 , and many California cities set a higher local rate.
1. Minimum Wage
The California statewide minimum wage is $16.90 per hour for all employers effective January 1, 2026 , up from $16.50. The rate is indexed and adjusts annually.
Local ordinances often set a higher rate. Cities and counties across California — Los Angeles, San Francisco, San Jose, Oakland, San Diego, Berkeley, Emeryville, Pasadena, Santa Monica, and many others — impose their own minimum wages, and the rate is generally set by where the employee performs the work , not where the employer is based. A roofing crew that works Monday in one city and Tuesday in another may be owed two different rates in the same week. Check the local ordinance for every job site.
2. Overtime — Where California Departs from Federal Law
Federal law requires overtime only past 40 hours in a workweek. California adds a daily rule and a seventh-day rule.
- Condition Rate
- Over 8 hours in a workday 1.5 × regular rate
- Over 40 hours in a workweek 1.5 × regular rate
- Over 12 hours in a workday 2.0 × regular rate
- First 8 hours on the 7th consecutive day of work in a workweek 1.5 × regular rate
- Beyond 8 hours on the 7th consecutive day 2.0 × regular rate
Daily and weekly overtime are not stacked for the same hour — an hour paid as daily overtime is not counted again toward the weekly threshold.
The Regular Rate
Overtime is computed on the regular rate of pay , not the base hourly wage. The regular rate includes non-discretionary bonuses, production or piece-rate earnings, and shift differentials. A roofing company paying a production bonus must recompute the regular rate for the period the bonus covers and pay the overtime differential on it.
Worked Example
A roofer earns $32.00 per hour and works 11 hours on Monday during a heat-shortened week. 8 hours × 32.00 = $ 256.00 8 \text{ hours} \times 32.00 = \$256.00 8 hours × 32.00 = $256.00 3 hours × ( 32.00 × 1.5 ) = 3 × 48.00 = $ 144.00 3 \text{ hours} \times (32.00 \times 1.5) = 3 \times 48.00 = \$144.00 3 hours × ( 32.00 × 1.5 ) = 3 × 48.00 = $144.00 Monday total = $ 400.00 \text{Monday total} = \mathbf{\$400.00} Monday total = $400.00
If the same roofer had worked 14 hours: 8 at straight time ($256), 4 at time and one-half ($192), and 2 at double time ($128) = $576.00 .
3. Meal and Rest Periods
Break Trigger Rules
First meal period Shift over 5 hours 30 minutes, unpaid and duty-free, beginning no later than the end of the fifth hour . May be waived by mutual consent if the shift is 6 hours or less
Second meal period Shift over 10 hours Another 30 minutes, beginning no later than the end of the tenth hour. May be waived if the shift is 12 hours or less and the first meal period was not waived
Rest period Every 4 hours or major fraction thereof 10 minutes, paid , insofar as practicable in the middle of each work period. 3.5 to 6 hours = one rest break; over 6 to 10 = two; over 10 to 14 = three
The Premium
For each workday that a required meal period is not provided, the employer owes one additional hour of pay at the employee's regular rate . The same is true for rest periods, separately. That is up to two premium hours per employee per day .
Roofing exposure is concentrated in three practices: crews "working through" lunch to beat the weather, a foreman calling the crew back before 30 minutes have elapsed, and an on-duty meal period that is not genuinely duty-free. All three are premium-generating.
4. Itemized Wage Statements (Labor Code § 226)
Every pay period, each employee must receive a wage statement showing:
- Gross wages earned
- Total hours worked (for non-exempt employees)
- Piece-rate units and rate, where applicable
- All deductions
- Net wages earned
- The inclusive dates of the pay period
- The employee's name and the last four digits of their Social Security number or an employee ID
- The legal name and address of the legal entity that is the employer
- All applicable hourly rates and the corresponding hours worked at each rate
Defective wage statements generate statutory penalties per employee per pay period, and copies must be retained for three years .
Paydays. Labor Code § 204 generally requires wages to be paid at least twice during each calendar month on designated paydays, with work performed in the first half of a month paid by the 26th and the second half by the 10th of the following month. A weekly or biweekly payroll satisfies the rule when wages are paid within seven calendar days of the close of the payroll period.
5. Paid Sick Leave
California requires employers to provide paid sick leave to employees who work 30 or more days within a year. Accrual is at least 1 hour for every 30 hours worked , and employers must provide at least 40 hours or 5 days per year , whichever is greater under the statute's terms. Employers may cap accrual at 80 hours or 10 days and may use a front-loading method instead of accrual. Accrued paid sick leave carries over but need not be paid out at separation. Many California cities impose more generous local ordinances.
6. Payroll Taxes, Deposits, and Returns
Obligation Agency Form and timing
Federal income tax withholding, Social Security, Medicare IRS Deposited on a monthly or semiweekly schedule determined by the size of the payroll tax liability over a lookback period; reported quarterly on Form 941
Federal unemployment (FUTA) IRS Form 940 , annually; deposited quarterly once the liability threshold is exceeded
California UI, ETT, SDI, and PIT withholding EDD DE 9 and DE 9C quarterly; deposits follow a schedule tied to the federal deposit schedule and the size of the PIT liability
- Wage and tax statements IRS / SSA Form W-2 to employees and W-3 transmittal by January 31
- Non-employee compensation IRS Form 1099-NEC by January 31
Deposit frequency is driven by liability, not headcount. This is a directly tested point: the schedule comes from the amount of the employer's payroll tax liability measured over a lookback period, not from the number of employees, the age of the business, or the mix of salaried and hourly workers.
Withheld taxes are trust fund money. Employee withholding belongs to the government from the moment it is withheld. Using it as working capital exposes responsible individuals — owners, officers, and sometimes bookkeepers — to personal assessment even where the business is a corporation or LLC. Sweep withholding into a separate account on payday.
Permissible deductions are narrow. California allows deductions required by law, deductions the employee authorizes in writing for insurance or benefit plans, and deductions authorized by a collective bargaining agreement. California does not allow an employer to deduct for cash shortages, breakage, loss of equipment, unreturned tools, or ordinary negligence.