Study guide
10.2 Supervising and Training Employees
California C-39 Roofing Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Planning, Codes, and Roofing Estimating
1.1 California Building Codes, Title 24 Energy Standards, and Plan Reading 1.2 Roof Geometry, Area Calculations, and Pitch Multipliers 1.3 Material Takeoffs, Squares, and Waste Calculations 1.4 Roof System Selection, Specifications, Permits, and Project Scheduling 1.5 Labor Production Rates, Overhead, Profit, and Roofing Bid Pricing
2 Chapter 2: Job Site Preparation and Substrate Remediation
2.1 Jobsite Protection, Material Staging, and Temporary Weatherproofing 2.2 Tear-Off Procedures, Overlay Limitations, and Hazardous Materials 2.3 Roof Deck Inspection, Substrate Preparation, and Sheathing Repairs
3 Chapter 3: Low-Slope Roof Systems — Built-Up, Modified Bitumen, and Single-Ply
3.1 Built-Up Roofing (BUR) Systems, Felts, and Hot Bitumen Application 3.2 Modified Bitumen Membrane Systems (APP vs. SBS) and Installation 3.3 Single-Ply Roofing Membranes (TPO, PVC, EPDM) and Seaming Methods
4 Chapter 4: Low-Slope Roof Systems — SPF, Coatings, Flashings, and Maintenance
4.1 Spray Polyurethane Foam (SPF) and Liquid-Applied Protective Coatings 4.2 Low-Slope Drainage, Perimeters, Penetration Flashings, and Scuppers 4.3 Low-Slope Diagnostics, Blister Repairs, and Preventative Maintenance
5 Chapter 5: Steep-Slope Roofing — Flashing, Underlayment, and Ventilation
5.1 Steep-Slope Underlayments, Felt Grades, and Self-Adhering Ice/Water Barriers 5.2 Flashing Details: Valleys, Drip Edges, Step Flashing, Aprons, and Crickets 5.3 Attic and Roof Ventilation: NFVA Requirements, Vent Types, and Airflow Balance
6 Chapter 6: Steep-Slope Roofing — Materials, Installation, and Repair
6.1 Asphalt Shingle Installation, Fastening Patterns, and Wind/Slope Requirements 6.2 Concrete and Clay Tile Roofing (TRI Standards, Battens, and Fastening) 6.3 Standing Seam Metal Panels, Wood Shakes, Slate, and Steep-Slope Repairs 6.4 Steep-Slope Leak Diagnosis, Targeted Repairs, and the Repair-or-Replace Decision
7 Chapter 7: California Roofing Safety — Cal/OSHA, Fall Protection, and Hazards
7.1 Cal/OSHA Fall Protection: Residential Roofing (§1731), Roof Hazards (§1730), and PFAS 7.2 Cal/OSHA Ladder Safety, Scaffold Erection, and Power Line Clearance 7.3 Heat Illness Prevention (CCR §3395), Hot Asphalt Safety, and Personnel PPE 7.4 Injury and Illness Prevention Program, Safety Training, Recordkeeping, and Cal/OSHA Reporting 7.5 Hazard Communication, Asbestos, Lead, and Silica: Managing Unknown Materials
8 Chapter 8: CSLB Licensing Law and Business Organization
8.1 CSLB Licensing Classifications, Bond Requirements, and License Law 8.2 Business Entity Choice, Personnel of Record, and Qualifier Responsibilities 8.3 Advertising Rules, Home Improvement Salespersons, and Subcontracting
9 Chapter 9: Business Finances, Financial Reporting, and Taxes
9.1 Cash Management, Job Costing, and Working Capital 9.2 Budgeting, Business Planning, and Break-Even Analysis 9.3 Financial Reporting: Statements, Accounting Methods, and Key Ratios 9.4 Federal and California Taxes for Roofing Contractors
10 Chapter 10: Employment Requirements, Supervision, and Payroll
10.1 Hiring: Worker Classification, Verification, and New-Hire Reporting 10.2 Supervising and Training Employees 10.3 Performance Evaluation, Personnel Records, and Termination 10.4 California Payroll: Wages, Overtime, Meal and Rest Periods, and Deposits
11 Chapter 11: Insurance, Bonds, and Payment Remedies
11.1 Workers' Compensation Insurance for California Roofing Contractors 11.2 Business Insurance and Surety Bonds 11.3 California Mechanics Lien Law, 20-Day Preliminary Notices, and Lien Waivers
12 Chapter 12: Contract Requirements, Bidding, and Project Execution
12.1 California Roofing Contracts, Home Improvement Law (B&P §7159), and Warranties 12.2 Bidding Practices, Bid Documents, and Competitive Bidding Law 12.3 Job Cost Control and Change Order Management 12.4 Project Organization, Scheduling, and Documentation 12.5 Payments: Progress Payments, Retention, and California Prompt Payment Law
13 Chapter 13: Public Works Roofing Projects
13.1 Prevailing Wage, DIR Registration, and Certified Payroll 13.2 Public Works Bonding and Insurance Requirements
10.2 Supervising and Training Employees
Key Takeaways Explain This Topic AI
The CSLB qualifier's duty of direct supervision and control under B&P § 7068.1 is a licensing obligation distinct from a foreman's day-to-day field supervision, and it cannot be delegated away entirely.
Cal/OSHA § 3203(a)(7) requires supervisors to be trained to familiarize themselves with the safety and health hazards to which the employees under their immediate direction and control are exposed.
Employers with five or more employees must provide two hours of sexual harassment prevention training to supervisors and one hour to non-supervisory employees every two years, and within six months of hire or promotion.
Title 8 CCR § 1509 requires supervisors to hold toolbox or tailgate safety meetings with their crews at least every 10 working days, and those meetings are the primary documented training record for a roofing crew.
A supervisor's instruction to skip a meal period, work off the clock, or work without fall protection creates direct employer liability, so supervisor training on wage-and-hour and safety rules is a risk control, not a courtesy.
Last updated: September 2026
Supervising and Training Employees
Quick Answer: Supervision in a California roofing company runs on two levels. The CSLB qualifier owes a licensing duty of direct supervision and control under B&P § 7068.1 — direct supervision, or monitoring and being available to assist those to whom it is delegated. The foreman owes day-to-day field supervision. Training is not optional: § 3203(a)(7) requires supervisors to be trained on the hazards their crews face; § 1509(e) requires tailgate meetings at least every 10 working days ; § 1731(d) requires roofing-specific fall hazard training; and employers with five or more employees owe two hours of harassment prevention training to supervisors and one hour to everyone else every two years .
1. Two Layers of Supervision
- Qualifier (RMO / RME) Foreman / Superintendent
- Source of duty B&P § 7068.1 — a licensing obligation Employment; Cal/OSHA § 3203 and § 1509
What it requires Direct supervision or control of construction operations, or monitoring and being available to assist others to whom it is delegated, to secure compliance with license law Directing the crew, enforcing safe practices, managing production and quality on a specific job
Can it be delegated? Partially — but the qualifier stays responsible and must remain available and engaged Yes, within the company's structure
Failure consequence CSLB discipline against the license and the qualifier's own record Employer liability for wage, safety, and harassment violations; termination
CSLB requires the licensee to submit detailed information about the qualifier's actual duties and responsibilities. A qualifier who is a name on a filing and nothing more exposes both the individual and the company.
2. Statutorily Required Training
Training Source Who and how often
IIPP training 8 CCR § 3203(a)(7) All employees at program start, at hire, on new assignment, on new hazards; supervisors on the hazards their crews face
Code of Safe Practices and tailgate meetings 8 CCR § 1509 Supervisors with crews at least every 10 working days
Roofing fall hazards 8 CCR § 1731(d) Gable ends, slipping, roof holes and openings, skylights, ladders and scaffolds, roof access, material placement, impalement, care and use of fall protection
Fall protection systems 8 CCR §§ 1670, 1671.1 Anyone using a PFAS, and anyone working under an infeasibility plan
- Heat illness prevention 8 CCR § 3395 All employees and supervisors before work in the heat
- Hazard communication 8 CCR § 5194 Before first assignment and on new hazards
Respiratory protection 8 CCR § 5144 Anyone required to wear a respirator; includes fit testing and medical evaluation
- Silica 8 CCR § 1532.3 Employees exposed at or above the action level
- Asbestos / lead 8 CCR §§ 1529, 1532.1 Class-specific and task-specific
Harassment prevention Gov. Code § 12950.1 Employers with 5+ employees : 2 hours for supervisors, 1 hour for non-supervisors, every 2 years , and within 6 months of hire or promotion
- Workplace violence prevention Labor Code § 6401.9 Covered employers, at plan rollout and annually
- 3. Structuring On-the-Job Training for a Roofing Crew
Regulatory training is the floor; a roofing company that wants production and quality builds a progression on top of it.
A four-stage crew progression:
Laborer / ground. Site protection, debris handling and the chute, magnetic sweeping, material staging over bearing lines, ladder use, heat and hydration, hazard reporting.
Tear-off and dry-in. Tear-off tooling and sequence, fastener removal, deck inspection and callouts, underlayment type and lap by slope, drip edge sequencing at eaves and rakes, night seals and tarping.
Installer. Layout and offset, fastener placement in the nail line, flashing details, valley construction, ventilation, tile loading and setting, quality standards, manufacturer instruction compliance.
Lead / foreman. Reading plans and specs, running the daily plan, inspection coordination, crew safety and the tailgate, documenting field conditions, customer communication, identifying change-order conditions before anyone does the work.
Teach each task the same way: explain why it matters (code, warranty, safety), demonstrate it, watch the worker do it, correct immediately, then re-check. Pair new workers with an experienced mentor and give the mentor explicit authority to stop unsafe work.
4. What Supervisors Must Be Trained Not to Do
Supervisor conduct binds the employer. Train explicitly against these:
"Work through lunch and I'll pay you for it." California meal period rules are not waivable that way, and each missed meal period is an hour of premium pay.
"Clock out and finish the ridge." Off-the-clock work is unpaid wage liability plus wage statement penalties.
"It's only a couple of hours; skip the harness." Residential fall protection triggers at a 6-foot fall distance on slopes through 7:12 and at any height above 7:12.
"Don't report that; it's minor." Discouraging injury reporting is retaliation and it also defeats the § 3203 communication element.
Tolerating harassing or discriminatory conduct, or retaliating against a worker who raises a safety or wage concern.
5. Documentation
If a training is not documented, it did not happen as far as Cal/OSHA and the Labor Commissioner are concerned. Keep:
- A training matrix by employee showing each required topic and date
- Tailgate meeting records : date, topic, presenter, and crew signatures
- Certification records for fall protection, respirator fit tests, forklift or lift operation, first aid and CPR
- Signed acknowledgements of the IIPP, Code of Safe Practices, heat illness plan, and employee handbook
- Corrective coaching records — what was observed, what was instructed, and when it was re-checked
Training records are kept under § 3203(b); the injury log is kept 5 years ; payroll records 3 years ; and medical and exposure records under § 3204 for the duration of employment plus 30 years .