Study guide
10.3 Flight Planning, NOTAMs & Energy Planning
Transport Canada RPAS Advanced Operations Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Certificate Path, Flight Review & Recency
2 Chapter 1: Canadian Aviation Framework & CARs Part IX
1.1 Aeronautics Act, CARs Structure & Document Production 1.2 RPAS Registration, Marking & Ownership 1.3 Basic vs Advanced Privileges 1.4 General Operating Rules (VLOS, Altitude, Right of Way)
3 Chapter 2: Advanced Operating Rules & Modern Privileges
2.1 Safety Assurance Declarations (Standard 922) 2.2 Operations Near and Over People 2.3 Medium Drones (25–150 kg) 2.4 EVLOS and Sheltered Operations
4 Chapter 3: Controlled Airspace, ATC & Authorization
3.1 Airspace Structure Classes A–G 3.2 Class C, D & E Entry and Transponder Context 3.3 RPAS Flight Authorization (NAV Drone) 3.4 ATC Instructions, Clearances & Deconfliction
5 Chapter 4: Aerodromes & Airspace Proximity
4.1 Certified Airports & the 5.6 km Rule 4.2 Heliports, Control Zones & Uncontrolled Aerodromes 4.3 Class F Special-Use Airspace & Forest Fire Restrictions
6 Chapter 5: Meteorology Fundamentals
5.1 Atmosphere, Pressure & Altimetry 5.2 Moisture, Stability & Clouds 5.3 Wind, Turbulence & Surface-Based Layers 5.4 Fronts, Thunderstorms & Icing
7 Chapter 6: Aviation Weather Products & Minima
6.1 METAR Decoding 6.2 TAF Decoding 6.3 Weather Services & RPAS Weather Minima
8 Chapter 7: RPAS Systems, Power & Instruments
7.1 Airframes, Electrical Systems & Propulsion 7.2 Batteries, LiPo Safety & TDG 7.3 Data Links, Control Stations & Autopilots 7.4 Compass, Altimeter, Airspeed & IMU
9 Chapter 8: Maintenance, Payloads & Safety Assurance Hardware
8.1 Maintenance, Technical Logs & Serviceability 8.2 Payloads, Launch & Recovery Systems 8.3 Manufacturer Declarations & Modified RPAS
10 Chapter 9: Human Factors & Crew Resource Management
9.1 Physiology, Fatigue & Fitness to Fly 9.2 Decision-Making, Attitudes & Situational Awareness 9.3 CRM, Visual Observers & SOPs
11 Chapter 10: Navigation, Charts & Flight Planning
10.1 Navigation Definitions, Variation & UTC 10.2 VNC, VTA Charts & Canada Flight Supplement 10.3 Flight Planning, NOTAMs & Energy Planning 10.4 GNSS, Radio Theory & Transponders
12 Chapter 11: Flight Operations & Emergencies
11.1 Site Survey, Pre-Flight & Performance 11.2 Weight & Balance, Contamination & Winter Ops 11.3 Lost Link, Flyaway & Emergency Procedures 11.4 Incidents, Accidents & Reporting
13 Chapter 12: Theory of Flight
12.1 Principles of Flight & Four Forces 12.2 Aerofoils, Stability & Load Factor 12.3 Multi-Rotor Dynamics & Helicopter Controls
14 Chapter 13: Radiotelephony
13.1 Phraseology, Phonetics & Operator Certificate 13.2 Frequencies, MF/ATF & Emergency Calls
15 Chapter 14: Exam Strategy & Flight Review Prep
14.1 Written Exam Strategy & Study Plan 14.2 Flight Review Exercises (Standard 921.02 / TP 15395)
10.3 Flight Planning, NOTAMs & Energy Planning
Key Takeaways Explain This Topic AI
Choose a flying area using airspace class, aerodrome proximity, people/property risk, terrain/obstacles, weather, RF environment, and emergency landing options—not client convenience alone.
NOTAMs publish time-critical aeronautical information including fire restrictions, airshows, and other temporary flight constraints; read them for the volume and time you will actually fly.
Plan fuel/energy with reserves: wind, temperature/density altitude, payload, hover vs cruise mix, and contingency for a second approach or diversion to an alternate LZ.
Weight and balance, serviceability, correct configuration, and documents available to the crew (certificate, registration, manuals, authorizations) are preflight legal and safety gates.
CAR 901.27 site survey and 901.24 pre-flight information requirements formalize what professional planners already do: know the site and the aeronautical/weather picture before launch.
Last updated: July 2026
10.3 Flight Planning, NOTAMs & Energy Planning
Quick Answer: Pick the flying area for safety and legality , not only access. Read NOTAMs (fires, airshows, temporary restrictions), CFS , charts, weather, and authorizations. Plan energy/fuel reserves , weight and balance , and configuration/serviceability . Keep crew documents available. Complete a real site survey (CAR 901.27) and obtain required pre-flight information (CAR 901.24) before you arm motors.
Navigation products only pay off when they feed a deliberate plan. Advanced operations fail when pilots “wing it” inside a control zone, launch with 12% battery because the client is waiting, or skip NOTAMs and discover a forest-fire restriction after the fact. This section is the planning bridge between chart literacy and airborne decision-making.
Factors in choosing a flying area
Build a structured site-selection filter:
Factor Questions to answer
Airspace Class? Floor/ceiling? Authorization required? Class F nearby?
Aerodromes Inside 5.6 km of certified airport/military? 1.9 km of heliport? CFS remarks?
People & property Distances to bystanders, roads, gatherings; near/over people privileges and declarations?
- Terrain & obstacles Towers, wires, trees, reflective glass, water, steep slopes
- Weather & microclimate Wind, gusts, density altitude, visibility, icing, fog risk
- RF / GNSS environment Urban canyons, high-power transmitters, metal structures
- Emergency options Abort LZ, lost-link path that avoids people and approach paths
- Access & security Legal access to launch land; privacy and local bylaws
Mission fit Can VLOS (or approved EVLOS with observers) actually be maintained for the whole task?
A site that is perfect for photography but sits under a busy final approach without authorization is a no-go , not a “careful quick flight.” Document the go/no-go rationale; Advanced professionalism is visible in the planning record as much as in stick skills.
NOTAMs: temporary truth over the chart
A NOTAM (Notice to Airmen / Notice to Air Missions) is a time-sensitive notice containing information essential to personnel concerned with flight operations. Charts and CFS describe the baseline; NOTAMs describe what is different right now .
- Why RPAS pilots must read them
- Temporary restricted or hazardous areas
- Aerodrome closures, lighting failures, crane obstacles
- Airshows , fly-ins, major public events with aviation impact
- Forest fire related flight restrictions and aerial firefighting activity
- Navigation aid and communication outages (context for manned traffic behaviour)
- Other TFR-like temporary flight restrictions in Canadian publication form
- Fire, airshow, and temporary restriction themes
Forest fires: Aerial firefighting aircraft operate at low level with high workload and may use tankers, helicopters, and lead planes. Temporary restrictions around fires protect those crews and ground teams. Launching an RPAS into or toward a fire zone without clearance can ground firefighting aircraft and create criminal/civil exposure. Treat fire NOTAMs as hard stops unless you are an authorized participant under the published conditions.
Airshows and major events: Expect temporary restricted airspace, display boxes, and unusual traffic. Consumer drones near airshows are a classic enforcement target.
Other temporary constraints: Crane NOTAMs, VIP movements, military exercises, and disaster response can all alter an otherwise “green” chart picture.
How to read NOTAMs efficiently
Filter by location (aerodrome, FIR, radius around site) and time (UTC!).
Decode the condition: what is restricted, from what altitude, until when.
Translate Zulu validity to local crew briefing times (Section 10.1).
If ambiguous, escalate—contact FIC / appropriate authority / do not assume entry is allowed.
Re-check close to launch; NOTAMs can appear the morning of the job.
CFS in the planning loop
Use the CFS (Section 10.2) during planning to:
- Confirm aerodrome type and communication environment
- Note elevation for performance planning
- Identify special procedures and hazards in remarks
- Support authorization and vicinity briefings near airports/heliports
Pair CFS + chart + NOTAM + weather + authorization status into one briefing sheet for the pilot-in-command and visual observers.
Energy / “fuel” requirements and battery reserves
RPAS “fuel planning” is energy planning . LiPo (or other chemistry) packs are finite, temperature-sensitive, and nonlinear under high current.
Build an energy budget
- Term Planning meaning
- Taxi/hover out Climb to height, transit to start of survey
- Mission power Mapping grids, cinema orbits, heavy-lift hover
- Transit home Against expected wind
- Approach & landing Including one go-around / rejected landing
- Reserve Unplanned hover, traffic avoidance, RF reacquire, cold-soaked sag
Never plan to land at 0% or manufacturer “empty.” Professional practice sets a minimum landing state of charge (many operators use policy bands such as landing with meaningful reserve—exact percent is SOP-driven; exam emphasis is plan a reserve , not hope). High density altitude, payload, wind, and low temperature all increase required energy for the same ground track.
Wind effect on range and endurance
Headwind out / tailwind back is not free: time into wind grows more than time with wind shrinks for many profiles; multirotor power also rises fighting wind to hold position.
Station-keeping in gusts can dominate the budget on inspection jobs even with zero “route distance.”
Return-to-home into a strengthening wind is a classic flyaway-to-low-battery sequence—set RTH altitude/path with obstacles and energy in mind.
Fixed-wing RPA: fuel/energy vs wind is classic range/endurance theory; multirotors: every minute is powered flight.
Weight and balance
Even small RPA have mass and centre-of-gravity (CG) limits:
Payload changes (camera, LiDAR, sprayer tanks, loudspeakers) shift CG and raise all-up weight.
Exceeding max takeoff mass reduces thrust margin and may invalidate manufacturer performance and, for declared aircraft, the assumed configuration.
Lateral imbalance causes constant motor differential, heat, and shortened endurance.
Document configuration for the flight; a “quick extra battery taped on” is a maintenance and W&B event, not a hack.
Documents available to the crew
Part IX and professional practice expect relevant documents to be available (not necessarily paper in a briefcase if digital access is accepted and reliable). Typical set:
- Document Why
- Pilot certificate (Advanced as required) Privilege proof
- Aircraft registration / certificate of registration Identity and marking compliance
- Manufacturer manuals / operating instructions 901.30–901.31 themes
- RPAS Flight Authorization / permissions Controlled airspace, DND, site landowner as applicable
- Safety assurance / declaration evidence when required Near/over people, controlled airspace privileges
Site survey / briefing notes, insurance proof if organizational policy Operational control and client requirements
If an inspector or flight reviewer asks and the crew cannot produce required proof, the operation looks non-compliant even if the flying was skillful.
Serviceability and configuration
Flight planning assumes the machine you briefed is the machine you launch:
- Serviceable per CAR 901.29 themes (Chapter 8)
- Correct firmware , props, payload, and failsafe settings for the site
- Batteries within health and temperature limits
- Control link and GNSS status acceptable for the environment
- Lighting configured if night rules apply
A plan that requires Mode C conspicuity awareness or a declared aircraft does not survive swapping to an undeclared backup airframe at the last minute without re-checking privileges.
CAR 901.27 site survey and CAR 901.24 pre-flight information
These two rules are high-yield Advanced planning anchors.
CAR 901.27 — Site survey
901.27 requires a site survey before operation. Conceptually you must assess the operating area for hazards and constraints: airspace, aerodromes, people, obstacles, weather exposure, emergency procedures, and other relevant factors. A drive-by glance from the truck while spinning props is not a survey. Good surveys are written or checklist-based, shared with observers, and updated if conditions change.
CAR 901.24 — Pre-flight information
901.24 requires the pilot to obtain relevant pre-flight information for the intended flight. That information set classically includes weather, NOTAMs / aeronautical information, and other data needed to conduct the flight safely and legally. “I checked the phone weather widget” without NOTAMs or airspace status is incomplete.
Planning sequence that satisfies both spirits:
Define mission, altitude, times (UTC), aircraft, crew roles.
901.24 pack: weather, NOTAMs, CFS/chart/DAH extracts, authorization status.
901.27 site survey on location (or verified remote survey when appropriate and still valid).
Energy/W&B/configuration go/no-go.
Crew brief: lost link, emergencies, sterilize launch area, abort calls.
Launch only if all gates green.
- Common exam traps
- Treating NOTAMs as optional for “short” flights
- Ignoring fire or airshow restrictions because the site is “just outside the smoke”
- Planning battery use to empty with no reserve
- Skipping W&B after payload change
- Documents left at the office with no accessible copy
- Claiming Advanced certificate replaces site survey or pre-flight info duties
Bottom line: Flight planning is controlled decision-making under uncertainty. NOTAMs update the map; energy and W&B update the physics; 901.24 and 901.27 make preparation a legal duty. Advanced pilots who plan well rarely need heroics in the air.