Study guide

5.2 Navigation Fundamentals, Coordinates & UTC Time Conversion

Transport Canada RPAS Basic Operations Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Overview

1.1 About the Transport Canada Small Basic Exam 1.2 How to Use This Study Guide & Exam Strategy

2 Chapter 2: Air Law — Regulatory Framework, Certification & Registration

2.1 Regulatory Scope & RPA Weight Categories 2.2 Pilot Certification, Minimum Age & Recency Requirements 2.3 RPA Registration, Marking & Record Keeping

3 Chapter 3: Air Law — Operational Limits, Airspace Buffers & Compliance

3.1 Altitude Limits, Bystander Separation & Right of Way 3.2 Aerodrome Stand-offs, Forest Fires & Special Approvals 3.3 Fitness to Fly, Impairment Rules & Incident Reporting

4 Chapter 4: Airspace Classification & Air Traffic Services

4.1 Canadian Airspace Classes A–G & Uncontrolled Operations 4.2 Special Use Airspace, NOTAMs & NAV CANADA Services

5 Chapter 5: Navigation, Aeronautical Charts & Time

5.1 Aeronautical Charts & the Canada Flight Supplement 5.2 Navigation Fundamentals, Coordinates & UTC Time Conversion

6 Chapter 6: Meteorology — Aviation Weather Reports & Density Altitude

6.1 Decoding METAR and TAF Weather Reports 6.2 Density Altitude & Atmospheric Pressure Effects

7 Chapter 7: Meteorology — Weather Hazards, Turbulence & Visibility

7.1 Thunderstorms, Wind Shear & Turbulence 7.2 Icing, Fog Types & VLOS Weather Minimums 7.3 Wind, Local Effects & Low-Level Cloud Recognition

8 Chapter 8: RPAS Systems, Power Plants & Fail-Safes

8.1 RPA Airframes, Propulsion & Electrical Systems 8.2 LiPo Battery Care, Charging & Cold-Weather Operations 8.3 Fuel Systems, Launch & Recovery Systems, Payloads & Maintenance Records

9 Chapter 9: C2 Link, Avionics & Theory of Flight

9.1 Command & Control (C2), Sensors & Fail-Safe Modes 9.2 Aerodynamics & Four Forces of Flight 9.3 Flight Instruments: Magnetic Compass, Altimeter, Airspeed Indicator & IMU 9.4 Airframe Configurations, Stability & Flight Controls

10 Chapter 10: Flight Operations, Planning & Risk Management

10.1 Pilot-in-Command Duties, SOPs & Checklists 10.2 Site Survey, Environmental Analysis & Hazard Mitigation

11 Chapter 11: Weight & Balance, Emergencies & Night Operations

11.1 Weight & Balance, Center of Gravity & Performance 11.2 Emergency Procedures, Flyaways & Night Flight

12 Chapter 12: Human Factors & Aeronautical Radiotelephony

12.1 Human Performance, IMSAFE & Crew Resource Management 12.2 Visual Scanning, Visual Observers & Radiotelephony Phraseology 12.3 Hearing, Illusions, the Operating Environment & Operating Pressures

5.2 Navigation Fundamentals, Coordinates & UTC Time Conversion

Key Takeaways Explain This Topic AI

Along any meridian of longitude, exactly 1 minute of latitude equals 1 nautical mile (1.852 km or 6,076 feet), whereas the physical distance represented by 1 minute of longitude decreases toward the poles.

Aeronautical charts, parallels, meridians, and published textual weather reports (METAR, TAF, GFA) reference True North ('if you read it, it is True'), while runway numbers, compasses, and tower radio broadcasts reference Magnetic North ('if you hear it, it is Magnetic').

Magnetic variation is the angular difference between True North and Magnetic North, calculated using the rule 'East is least (subtract), West is best (add)' to convert True headings to Magnetic headings.

Compass deviation is caused by onboard electromagnetic interference from drone motors, ESCs, and payloads, or by nearby steel structures, requiring pre-flight calibration away from metallic surfaces.

Coordinated Universal Time (UTC or Zulu) standardizes aviation time across Canada's six time zones, spanning offsets from UTC-3:30 (NST) in Newfoundland to UTC-8 (PST) in the Pacific region.

Last updated: September 2026

5.2 Navigation Fundamentals, Coordinates & UTC Time Conversion

Exam Focus: Transport Canada's RPAS Basic exam tests geographic coordinates, magnetic variation mathematics, and Coordinated Universal Time (UTC) conversions. Master the rule that 1 minute of latitude equals 1 nautical mile, the convention that printed data is True while radio/compass data is Magnetic, the "East is least, West is best" formula, and Canadian time zone offsets from UTC.

Safe air navigation requires an unambiguous framework for position, heading, and time. Because remotely piloted aircraft combine GNSS positioning, digital magnetometers, and aviation weather reports, pilots must seamlessly convert between coordinates, magnetic bearings, and UTC timestamps.

Geographic Coordinates: Latitude and Longitude

Earth's surface is mapped using a spherical coordinate grid of latitude parallels and longitude meridians:

1. Latitude (Parallels)

Geometry: Parallels run East-West, measuring distance North or South from the Equator (0°) to the North Pole (90°N) and South Pole (90°S). Because parallels never intersect, spacing between degrees remains constant worldwide.

Distance Equivalence:

1 degree of latitude (1°) = 60 nautical miles (NM) ≈ 111.1 kilometres.

1 minute of latitude (1') = exactly 1 nautical mile (1.852 km or 6,076.1 ft) .

1 second of latitude (1") = approximately 101.3 feet (30.8 m) .

Chart Measurement Rule: The latitude scale on VNC side borders serves as a universal distance ruler: 1 minute of latitude equals 1 nautical mile.

2. Longitude (Meridians)

Geometry: Meridians run North-South from pole to pole, crossing the Equator at right angles. Measured from the Prime Meridian (0°) in Greenwich to 180° West across Canada (~52°W in Newfoundland to 141°W in Yukon).

Meridian Convergence: Meridians converge at the poles. While 1 minute of longitude equals 1 NM at the Equator, the physical distance between meridians shrinks toward the poles: Distance = 1 NM × cos ⁡ ( Latitude ) \text{Distance} = 1\text{ NM} \times \cos(\text{Latitude}) Distance = 1 NM × cos ( Latitude ) . Exam Rule: Never use the longitude scale to measure distances on a chart.

3. Coordinate Notations

Coordinates appear in three standard formats:

Format Notation Structure Example (Ottawa Macdonald-Cartier ARP)

Degrees, Minutes, Seconds (DMS) D D ∘ M M ′ S S " DD^\circ MM' SS" D D ∘ M M ′ SS " 45 ∘ 19 ′ 21 " N , 075 ∘ 40 ′ 09 " W 45^\circ 19' 21" \text{ N}, 075^\circ 40' 09" \text{ W} 4 5 ∘ 1 9 ′ 21" N , 07 5 ∘ 4 0 ′ 09" W

Degrees and Decimal Minutes (DDM) D D ∘ M M . m m m ′ DD^\circ MM.mmm' D D ∘ MM . mm m ′ 45 ∘ 19.350 ′ N , 075 ∘ 40.150 ′ W 45^\circ 19.350' \text{ N}, 075^\circ 40.150' \text{ W} 4 5 ∘ 19.35 0 ′ N , 07 5 ∘ 40.15 0 ′ W

Decimal Degrees (DD) D D . d d d d ∘ DD.dddd^\circ DD . ddd d ∘ 45.3225 ∘ N , − 75.6692 ∘ W 45.3225^\circ \text{ N}, -75.6692^\circ \text{ W} 45.322 5 ∘ N , − 75.669 2 ∘ W

Conversions: Divide seconds by 60 for decimal minutes ( 21 " ÷ 60 = 0.35 ′ 21" \div 60 = 0.35' 21" ÷ 60 = 0.3 5 ′ ); divide minutes by 60 for decimal degrees ( 19.35 ′ ÷ 60 = 0.3225 ∘ 19.35' \div 60 = 0.3225^\circ 19.3 5 ′ ÷ 60 = 0.322 5 ∘ ).

True North vs. Magnetic North

Aviation recognizes two directional references:

True North (Geographic North): Earth's rotational axis where meridians intersect; the reference for charts.

Magnetic North: The fluctuating polar region toward which magnetic compass needles align.

The Fundamental Aviation Convention "IF YOU READ IT IN PRINT, IT IS TRUE.

IF YOU HEAR IT OVER THE RADIO, IT IS MAGNETIC."

True North References: VNC/VTA charts, parallels, meridians, and published weather reports: METARs, TAFs, Graphic Area Forecasts (GFAs) , and Upper Winds (FD).

Magnetic North References: Aircraft compasses, magnetometers, runway numbers (e.g., Runway 24 = ~240° magnetic), and verbal radio reports from ATC towers, Flight Service Stations (FSS), and ATIS broadcasts.

Magnetic Variation and Isogonic Lines

Magnetic Variation is the horizontal angle between True North and Magnetic North at a given location.

Isogonic Lines: Dashed magenta lines on VNC charts connecting points of equal magnetic variation (e.g., 10°W , 15°W , 12°E ).

The Agonic Line: A line of 0° variation where True and Magnetic North align. East of this line variation is West; west of it variation is East.

Canadian Values: Ranges from ~20°W in Newfoundland and ~13°W in Ottawa/Montreal, to 0° near Thunder Bay, and ~14°E in Alberta and ~16°E in Vancouver.

Calculation Rule: "East is Least, West is Best" Magnetic Heading = True Heading − Easterly Variation ( "East is least" — subtract ) Magnetic Heading = True Heading + Westerly Variation ( "West is best" — add ) \begin{aligned}

\text{Magnetic Heading} &= \text{True Heading} - \text{Easterly Variation} \quad &(\text{"East is least" — subtract}) \\

\text{Magnetic Heading} &= \text{True Heading} + \text{Westerly Variation} \quad &(\text{"West is best" — add})

\end{aligned} Magnetic Heading Magnetic Heading ​ = True Heading − Easterly Variation = True Heading + Westerly Variation ​ ( "East is least" — subtract ) ( "West is best" — add ) ​

Conversely, to convert Magnetic to True: True = Magnetic + East \text{True} = \text{Magnetic} + \text{East} True = Magnetic + East or Magnetic − West \text{Magnetic} - \text{West} Magnetic − West .

Worked Example: A True Track of 085° with 14°W variation yields: 085 ∘ + 14 ∘ = 099 ∘ Magnetic 085^\circ + 14^\circ = 099^\circ \text{ Magnetic} 08 5 ∘ + 1 4 ∘ = 09 9 ∘ Magnetic .

Compass Deviation & Drone Magnetometer Errors

Compass deviation is caused by electromagnetic disturbances within or near the aircraft:

Internal Sources: High-current wiring from battery to ESCs/motors, camera gimbal magnets, video transmitters, and metallic airframe components.

External Sources: Launching near reinforced concrete with steel rebar, chain-link fences, utility covers, and motor vehicles.

The "Toilet-Bowl" Effect: When deviation corrupts heading data, GNSS position-hold conflicts with magnetometer readings, producing circular oscillations during hover and risking uncommanded drops into manual Attitude (ATTI) mode.

Mitigation: Calibrate compasses in open fields, at least 15 metres away from metal infrastructure.

Coordinated Universal Time (UTC / Zulu)

Aviation operates globally on Coordinated Universal Time (UTC) , designated by the letter "Z" (Zulu) , referencing the Prime Meridian (0°).

Format: Four-digit 24-hour time ( 1430Z = 14:30 UTC). A six-digit Date-Time Group includes the day: 211800Z = 21st day at 18:00 UTC.

Canadian Time Zones and Conversion Offsets

Time Zone Standard Time (Winter) Daylight Saving (Summer) Conversion Formula from UTC

Pacific (PT) PST = UTC - 8 PDT = UTC - 7 Local = UTC − 8 hrs (PST) / − 7 hrs (PDT) \text{Local} = \text{UTC} - 8\text{ hrs (PST)} / - 7\text{ hrs (PDT)} Local = UTC − 8 hrs (PST) / − 7 hrs (PDT)

Mountain (MT) MST = UTC - 7 MDT = UTC - 6 Local = UTC − 7 hrs (MST) / − 6 hrs (MDT) \text{Local} = \text{UTC} - 7\text{ hrs (MST)} / - 6\text{ hrs (MDT)} Local = UTC − 7 hrs (MST) / − 6 hrs (MDT)

Central (CT) CST = UTC - 6 CDT = UTC - 5 Local = UTC − 6 hrs (CST) / − 5 hrs (CDT) \text{Local} = \text{UTC} - 6\text{ hrs (CST)} / - 5\text{ hrs (CDT)} Local = UTC − 6 hrs (CST) / − 5 hrs (CDT)

Eastern (ET) EST = UTC - 5 EDT = UTC - 4 Local = UTC − 5 hrs (EST) / − 4 hrs (EDT) \text{Local} = \text{UTC} - 5\text{ hrs (EST)} / - 4\text{ hrs (EDT)} Local = UTC − 5 hrs (EST) / − 4 hrs (EDT)

Atlantic (AT) AST = UTC - 4 ADT = UTC - 3 Local = UTC − 4 hrs (AST) / − 3 hrs (ADT) \text{Local} = \text{UTC} - 4\text{ hrs (AST)} / - 3\text{ hrs (ADT)} Local = UTC − 4 hrs (AST) / − 3 hrs (ADT)

Newfoundland (NT) NST = UTC - 3:30 NDT = UTC - 2:30 Local = UTC − 3.5 hrs (NST) / − 2.5 hrs (NDT) \text{Local} = \text{UTC} - 3.5\text{ hrs (NST)} / - 2.5\text{ hrs (NDT)} Local = UTC − 3.5 hrs (NST) / − 2.5 hrs (NDT)

Saskatchewan Note: Most of Saskatchewan observes CST (UTC-6) year-round without changing to Daylight Saving Time.

  • Practical Worked Conversions
  • Example 1: Decoding a NOTAM Window

A NOTAM specifies a restriction from 1400Z to 1800Z in Eastern Daylight Time (EDT, UTC-4):

Start: 1400 Z − 4 hrs = 1000 local (10:00 AM EDT) 1400Z - 4\text{ hrs} = 1000\text{ local (10:00 AM EDT)} 1400 Z − 4 hrs = 1000 local (10:00 AM EDT) . End: 1800 Z − 4 hrs = 1400 local (2:00 PM EDT) 1800Z - 4\text{ hrs} = 1400\text{ local (2:00 PM EDT)} 1800 Z − 4 hrs = 1400 local (2:00 PM EDT) .

Example 2: Interpreting a TAF Timestamp

A Vancouver TAF valid from 1012/1112 (12:00Z Jan 10 to 12:00Z Jan 11) during Pacific Standard Time (PST, UTC-8):

Start: 1200 Z − 8 hrs = 0400 PST (4:00 AM PST on Jan 10) 1200Z - 8\text{ hrs} = 0400\text{ PST (4:00 AM PST on Jan 10)} 1200 Z − 8 hrs = 0400 PST (4:00 AM PST on Jan 10) . End: 4:00 AM PST on Jan 11.

Loading diagram... Aviation Direction & Time Conversion Architecture