Study guide
4.1 Chemical & Physical Properties of Natural Gas vs. Propane
TSSA Gas Technician 3 G3
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Safety & Workplace Practices
1.1 Personal Protective Equipment (PPE) & Worksite Hazard Identification 1.2 WHMIS, GHS, Safety Data Sheets (SDS) & Chemical Safety 1.3 Electrical Safety, Lockout/Tagout (LOTO) & Confined Space Awareness
2 Chapter 2: Fasteners, Hand Tools & Power Tools
2.1 Hand Tools for Gas Piping and Mechanical Assembly 2.2 Power Tools, Threading Machines & Mechanical Fasteners
3 Chapter 3: Testing Instruments & Diagnostics
3.1 Pressure Measurement: U-Tube, Inclined & Digital Manometers 3.2 Electrical Multimeters, Combustion Analyzers & Electronic Leak Detectors
4 Chapter 4: Fuel Gas Properties & Combustion Principles
4.1 Chemical & Physical Properties of Natural Gas vs. Propane 4.2 Combustion Chemistry, Flammability Limits & Ignition Temperatures 4.3 Complete vs. Incomplete Combustion, Carbon Monoxide Hazards & Air Requirements
5 Chapter 5: Ontario Acts, Regulations & G.3 Scope of Authority
5.1 Technical Standards and Safety Act & O. Reg. 215/01 Certification 5.2 O. Reg. 211/01, O. Reg. 212/01 & TSSA Code Adoption Documents (CAD) 5.3 Unacceptable Conditions, Warning Notices & Red Tag Procedures
6 Chapter 6: CSA B149 Code Navigation & General Requirements
6.1 CSA B149.1 & CSA B149.2 Scope, Structure & Key Definitions 6.2 General Installation Rules: Instructions, Access, Clearances & Garages (Clause 4)
7 Chapter 7: Introduction to Electricity & Electrical Safety
7.1 Electrical Fundamentals: Ohm's Law, Power & Circuit Configurations 7.2 Line Voltage (120V) vs. Low Voltage (24V), Transformers & Circuit Protection 7.3 Basic Electrical Controls, Switches & Ladder Diagram Schematics
8 Chapter 8: Technical Manuals, Specifications & Architectural Drawings
8.1 Reading Appliance Rating Plates, Certified Manuals & Specifications 8.2 Architectural Blueprints, Mechanical Drawings & Piping Schematics
9 Chapter 9: Customer Relations, Professional Conduct & Documentation
9.1 Professional Communication, Ethics & Customer Service Standards 9.2 Work Orders, Service Documentation & Red Tag Communication
10 Chapter 10: Piping & Tubing Systems: Materials, Joining & Installation
10.1 Piping & Tubing Materials: Steel, Copper, CSST & Plastic 10.2 Pipe Joining Methods: Threading, Flaring, Brazing & Approved Sealants 10.3 Piping Installation: Supports, Hangers, Drip Legs, Dirt Pockets & Valves
11 Chapter 11: Gas Pipe Sizing, Pressure Testing & Purging Procedures
11.1 Gas Pipe & Tubing Sizing Fundamentals (Tables & Pressure Drop) 11.2 Pressure Testing, Leak Testing & the Ontario Test Tag (Clause 6.22) 11.3 Purging Procedures, Safety Protocols & Leak Detection (Clauses 6.23–6.24)
12 Chapter 12: Gas Appliances, Burners & Combustion Air Fundamentals
12.1 Appliance Classifications, Categories (I–IV), Approvals & Clearances 12.2 Atmospheric & Power Burners: Operation, Aeration & Flame Adjustment 12.3 Ignition Systems & Flame Safeguards: Standing Pilot, HSI, DSI, Thermocouples & Flame Rods 12.4 Combustion Air & Basic Venting Requirements (Clause 8)
4.1 Chemical & Physical Properties of Natural Gas vs. Propane
Key Takeaways Explain This Topic AI
Natural gas consists predominantly of methane ( CH 4 \text{CH}_4 CH 4 , 85 % to 95 % 85\%\text{ to }95\% 85% to 95% ) with a specific gravity of approximately 0.60 0.60 0.60 , making it lighter than air so it ascends toward ceilings and roof peaks.
Commercial propane vapor ( C 3 H 8 \text{C}_3\text{H}_8 C 3 H 8 ) has a specific gravity of approximately 1.52 1.52 1.52 , making it over 50 % 50\% 50% heavier than air; leaking propane sinks and pools in low-lying basements, crawl spaces, and floor drains.
At atmospheric pressure, natural gas boils at − 259 ∘ F -259^\circ\text{F} − 25 9 ∘ F ( − 162 ∘ C -162^\circ\text{C} − 16 2 ∘ C ), whereas propane boils at − 44 ∘ F -44^\circ\text{F} − 4 4 ∘ F ( − 42 ∘ C -42^\circ\text{C} − 4 2 ∘ C ); sub-zero Canadian temperatures require sizing propane tanks for winter wetted vaporization surface.
Propane expands at a liquid-to-gas ratio of 1 : 270 1:270 1 : 270 at standard temperature and pressure; liquid propane has a density of ≈ 4.20 to 4.24 lbs/US gal \approx 4.20\text{ to }4.24\text{ lbs/US gal} ≈ 4.20 to 4.24 lbs/US gal ( S G ≈ 0.51 SG \approx 0.51 SG ≈ 0.51 relative to water) and containers must never exceed 80 % 80\% 80% filling capacity.
CSA B149.1 Clause 4.24 requires natural gas supplying an occupied building to be odourized in accordance with CSA Z662 (readily detectable at no more than 1 / 5 1/5 1/5 of the lower flammable limit, about 0.8 % 0.8\% 0.8% gas in air) or be monitored by an approved gas detection system; never rely solely on smell because of odour fade.
Last updated: October 2026
Chemical & Physical Properties of Natural Gas vs. Propane
Understanding the physical and chemical characteristics of hydrocarbon fuel gases is the foundation of professional gas technician practice in Ontario. Under the Technical Standards and Safety Act, 2000 , Ontario Regulation 211/01 ( Propane Storage and Handling ), and Ontario Regulation 212/01 ( Gaseous Fuels ), certified Gas Technician 3 (G.3) certificate holders inspect, handle, and service equipment operating on two distinct fuels: natural gas and commercial propane. Although both belong to the alkane hydrocarbon family, their fundamental differences in molecular structure, specific gravity, boiling point, vaporization rate, and expansion ratios govern appliance design, piping installation, storage safety, and emergency response procedures under the CSA B149.1 Natural Gas and Propane Installation Code and the CSA B149.2 Propane Storage and Handling Code.
Chemical Composition & Molecular Structures
Fuel gases utilized in Canadian heating and power applications are saturated aliphatic hydrocarbons classified as alkanes or paraffins. Alkanes are composed entirely of carbon and hydrogen atoms connected by stable single covalent bonds, sharing the general chemical formula C n H 2 n + 2 \text{C}_n\text{H}_{2n+2} C n H 2 n + 2 :
Natural Gas: Raw natural gas extracted from geologic formations is a mixture of combustible and inert compounds. Once refined for commercial utility distribution, it is composed predominantly of methane ( CH 4 \text{CH}_4 CH 4 ) , which typically accounts for 85 % to 95 % 85\%\text{ to }95\% 85% to 95% of the total volume. The remaining fraction includes minor amounts of heavier alkanes such as ethane ( C 2 H 6 \text{C}_2\text{H}_6 C 2 H 6 , 2 % to 7 % 2\%\text{ to }7\% 2% to 7% ), propane ( C 3 H 8 \text{C}_3\text{H}_8 C 3 H 8 ), and butane ( C 4 H 10 \text{C}_4\text{H}_{10} C 4 H 10 ), alongside non-combustible inert gases including nitrogen ( N 2 \text{N}_2 N 2 , 1 % to 3 % 1\%\text{ to }3\% 1% to 3% ) and carbon dioxide ( CO 2 \text{CO}_2 CO 2 , 0.5 % to 2 % 0.5\%\text{ to }2\% 0.5% to 2% ). Because methane contains only one carbon atom bonded to four hydrogen atoms, it is the lightest and simplest hydrocarbon molecule. Natural gas is non-toxic; however, when released in an enclosed space, it acts as a simple asphyxiant by displacing life-supporting oxygen.
Commercial Propane (LPG): Liquefied petroleum gas marketed in Ontario for stationary heating, space heating, and commercial applications must conform to the Canadian General Standards Board standard for Grade HD-5 propane . Commercial HD-5 (CAN/CGSB-3.14) consists of at least 90 % 90\% 90% propane ( C 3 H 8 \text{C}_3\text{H}_8 C 3 H 8 ) , with a maximum allowable concentration of 5 % 5\% 5% propylene / propene ( C 3 H 6 \text{C}_3\text{H}_6 C 3 H 6 , an unsaturated hydrocarbon), and the remainder composed of butane, isobutane ( C 4 H 10 \text{C}_4\text{H}_{10} C 4 H 10 ), and trace alkanes. Propane contains three carbon atoms bonded to eight hydrogen atoms. Like methane, propane is non-toxic but acts as a rapid asphyxiant in confined, unventilated spaces.
Specific Gravity & Atmospheric Buoyancy
Specific gravity ( S G SG SG ) of a gas expresses the ratio of its density compared to the density of clean, dry ambient air at standard temperature and pressure ( 60 ∘ F / 15.6 ∘ C 60^\circ\text{F} / 15.6^\circ\text{C} 6 0 ∘ F /15. 6 ∘ C and 14.73 psia / 101.325 kPa 14.73\text{ psia} / 101.325\text{ kPa} 14.73 psia /101.325 kPa ), where air is assigned an arbitrary reference specific gravity of 1.00 1.00 1.00 .
Natural Gas ( S G ≈ 0.55 to 0.65 SG \approx 0.55\text{ to }0.65 SG ≈ 0.55 to 0.65 ; Nominal 0.60 0.60 0.60 )
Because natural gas has a specific gravity of approximately 0.60 0.60 0.60 , it is approximately 40 % 40\% 40% lighter than ambient air ( 0.60 < 1.00 0.60 < 1.00 0.60 < 1.00 ). When a leak occurs indoors or outdoors:
The escaping gas naturally ascends toward ceilings, roof trusses, and attic spaces.
It diffuses rapidly into open atmospheres and readily escapes through high-level roof vents, soffits, and upper-wall ventilation louvers.
While buoyancy minimizes the likelihood of prolonged floor-level accumulation, it creates severe explosion risks in unvented ceiling pockets, false bulkheads, and overhead joist spaces.
Propane Vapor ( S G ≈ 1.50 to 1.55 SG \approx 1.50\text{ to }1.55 SG ≈ 1.50 to 1.55 ; Nominal 1.52 1.52 1.52 )
Propane vapor has a specific gravity of approximately 1.52 1.52 1.52 , meaning it is more than 50 % 50\% 50% heavier than ambient air ( 1.52 > 1.00 1.52 > 1.00 1.52 > 1.00 ). When propane vapor escapes from a cylinder, piping joint, or burner orifice:
It behaves hydraulically like an invisible fluid, sinking toward the floor and flowing downhill along contours.
It settles and pools in low-lying zones such as basements, crawl spaces, elevator pits, plumbing trenches, and floor drains.
Heavy propane vapor does not dissipate through standard upper-level building ventilation; instead, it forms persistent stratified layers that displace oxygen and resist natural convection.
Warning
Leaking propane will pool in basements and low-grade trenches for hours or days without dissipating. A slight disturbance, pilot light, or motor contactor arc can ignite the accumulated vapor pocket, resulting in a devastating low-level explosion. Always ventilate low-lying spaces with explosion-proof blowers before servicing propane appliances.
Code Mandates Driven by Specific Gravity
The fundamental specific gravity divergence between natural gas and propane dictates distinct safety clauses across CSA B149.1 and CSA B149.2:
Keeping Propane Out of Low Spaces: CSA B149.2 limits where propane cylinders may be stored—as a rule, not inside occupied buildings—because leaking vapour sinks into basements, pits and crawl spaces and lingers there.
Regulator and Relief Vent Clearances: CSA B149.1 Clause 5.6 and Table 5.3 set clearances from regulator and relief-device vent discharges to building openings and air intakes (the 2025 edition bases them on relief capacity). Propane cylinders are also located so their relief discharge is at least 3 ft 3\text{ ft} 3 ft ( 1 m 1\text{ m} 1 m ) from any building opening and 10 ft 10\text{ ft} 10 ft ( 3 m 3\text{ m} 3 m ) from any mechanical air intake, because heavy vapour drains into basements.
Piping Purge Rules (Clause 6.23): Whether a system must be purged outdoors depends on pressure (over 2 psig 2\text{ psig} 2 psig ) and pipe size and length (Table 6.4), not on the fuel. Propane's heavy vapour makes outdoor discharge, an attended discharge point, and combustible gas indicator monitoring especially important.
Boiling Points, Vaporization & Canadian Winter Challenges
The atmospheric boiling point is the temperature at which a liquid converts into vapor at standard atmospheric pressure ( 14.7 psia / 101.325 kPa 14.7\text{ psia} / 101.325\text{ kPa} 14.7 psia /101.325 kPa ):
Natural Gas (Methane): Atmospheric boiling point is − 259 ∘ F -259^\circ\text{F} − 25 9 ∘ F ( − 162 ∘ C -162^\circ\text{C} − 16 2 ∘ C ) . Under all earthly climatic conditions, natural gas is hundreds of degrees above its boiling point and exists solely as a superheated gas. Because its critical temperature is − 116.6 ∘ F -116.6^\circ\text{F} − 116. 6 ∘ F ( − 82.6 ∘ C -82.6^\circ\text{C} − 82. 6 ∘ C ), it cannot be liquefied by pressure alone at ambient temperatures; storage as Liquefied Natural Gas (LNG) requires cryogenic vacuum vessels maintained below − 259 ∘ F -259^\circ\text{F} − 25 9 ∘ F . Utility distribution occurs exclusively in the vapor phase.
Propane: Atmospheric boiling point is − 44 ∘ F -44^\circ\text{F} − 4 4 ∘ F ( − 42 ∘ C -42^\circ\text{C} − 4 2 ∘ C ) . At any temperature above − 44 ∘ F -44^\circ\text{F} − 4 4 ∘ F , liquid propane boils and vaporizes vigorously at atmospheric pressure. Because propane has a critical temperature of 206 ∘ F 206^\circ\text{F} 20 6 ∘ F ( 96.7 ∘ C 96.7^\circ\text{C} 96. 7 ∘ C ), it is easily liquefied under moderate pressure at ordinary ambient temperatures. Inside a sealed storage container, propane maintains a liquid-vapor equilibrium under its own saturated vapor pressure (approximately 24 psig 24\text{ psig} 24 psig at 0 ∘ F 0^\circ\text{F} 0 ∘ F , 92 psig 92\text{ psig} 92 psig at 60 ∘ F 60^\circ\text{F} 6 0 ∘ F , and 172 psig 172\text{ psig} 172 psig at 100 ∘ F 100^\circ\text{F} 10 0 ∘ F ).
The Winter Vaporization Starvation Phenomenon
In Northern Ontario, winter temperatures frequently drop below − 20 ∘ F -20^\circ\text{F} − 2 0 ∘ F ( − 29 ∘ C -29^\circ\text{C} − 2 9 ∘ C ) and occasionally approach the − 44 ∘ F -44^\circ\text{F} − 4 4 ∘ F ( − 42 ∘ C -42^\circ\text{C} − 4 2 ∘ C ) boiling threshold of propane. When an appliance fires, vapor is drawn from the top of the container, forcing the liquid below to boil. Boiling extracts the latent heat of vaporization from the liquid itself (about 184 BTU/lb 184\text{ BTU/lb} 184 BTU/lb at the − 44 ∘ F -44^\circ\text{F} − 4 4 ∘ F boiling point, and somewhat less at warmer liquid temperatures).
If the ambient air temperature is extremely low or if the tank liquid level is low, the external wetted surface area of the steel tank cannot absorb ambient thermal energy fast enough to replenish this latent heat. The liquid propane rapidly chills below ambient temperature, frost lines appear on the outside of the container shell, internal vapor pressure collapses, and downstream furnaces starve for gas. Certified technicians must calculate container vaporization capacities based on winter temperatures and wetted surface area rather than total vessel storage volume.
Liquid Density, Thermal Expansion & The 80% Filling Rule
Liquid propane is significantly lighter than water, possessing a liquid specific gravity of approximately 0.504 to 0.510 0.504\text{ to }0.510 0.504 to 0.510 at 60 ∘ F 60^\circ\text{F} 6 0 ∘ F ( 15.6 ∘ C 15.6^\circ\text{C} 15. 6 ∘ C ) relative to water ( S G = 1.00 SG = 1.00 SG = 1.00 ). Liquid propane has a density of 4.20 to 4.24 lbs per US gallon 4.20\text{ to }4.24\text{ lbs per US gallon} 4.20 to 4.24 lbs per US gallon ( 0.504 to 0.510 kg/L 0.504\text{ to }0.510\text{ kg/L} 0.504 to 0.510 kg/L ), compared to water at 8.33 lbs/gal 8.33\text{ lbs/gal} 8.33 lbs/gal ( 1.00 kg/L 1.00\text{ kg/L} 1.00 kg/L ). Consequently, liquid propane floats on top of water.
Volumetric Thermal Expansion
Liquid propane exhibits an exceptionally high coefficient of volumetric thermal expansion—nearly 16 times 16\text{ times} 16 times that of water. For every 10 ∘ F 10^\circ\text{F} 1 0 ∘ F ( 5.6 ∘ C 5.6^\circ\text{C} 5. 6 ∘ C ) rise in temperature, the volume of liquid propane expands by approximately 1.5 % 1.5\% 1.5% .
The 80% Maximum Filling Rule
To prevent overpressurization, CSA B149.2 and Transport Canada cylinder rules limit how full a container may be. Cylinders are filled by weight to a maximum filling density of 42 % 42\% 42% of water capacity by weight, and fixed liquid-level gauges are set so the liquid occupies roughly 80 % 80\% 80% of the container volume (the exact maximum depends on container size and liquid temperature):
The remaining vapour headspace (roughly 20 % 20\% 20% ) serves as an indispensable cushion.
Liquid propane is virtually incompressible. If a container were filled completely to 100 % 100\% 100% liquid capacity on a cold morning (e.g., 10 ∘ F / − 12 ∘ C 10^\circ\text{F} / -12^\circ\text{C} 1 0 ∘ F / − 1 2 ∘ C ) and subsequent solar exposure warmed the tank to 80 ∘ F 80^\circ\text{F} 8 0 ∘ F ( 27 ∘ C 27^\circ\text{C} 2 7 ∘ C ), the thermal expansion of the liquid would eliminate the vapor space. The resulting hydraulic pressure would rapidly exceed vessel design ratings, opening the internal spring-loaded pressure relief valve or rupturing the tank shell.
Liquid-to-Gas Expansion Ratio (1:270)
At standard atmospheric pressure and 60 ∘ F 60^\circ\text{F} 6 0 ∘ F ( 15.6 ∘ C 15.6^\circ\text{C} 15. 6 ∘ C ), liquid propane expands into approximately 270 times its liquid volume when vaporizing into gas ( 1 : 270 1:270 1 : 270 expansion ratio). For comparison, LNG expands at roughly 1 : 600 1:600 1 : 600 .
Consider the practical jobsite implications of this expansion factor: 1 US gallon of liquid propane = 0.1337 cu ft of liquid 1\text{ US gallon of liquid propane} = 0.1337\text{ cu ft of liquid} 1 US gallon of liquid propane = 0.1337 cu ft of liquid 0.1337 cu ft liquid × 270 ≈ 36.1 cu ft of pure propane vapor 0.1337\text{ cu ft liquid} \times 270 \approx 36.1\text{ cu ft of pure propane vapor} 0.1337 cu ft liquid × 270 ≈ 36.1 cu ft of pure propane vapor
Because propane has a lower flammable limit (LFL) of 2.15 % 2.15\% 2.15% in air, this single gallon of liquid creates an explosive fuel-air mixture totaling: 36.1 cu ft 0.0215 ≈ 1,679 cubic feet of explosive atmosphere \frac{36.1\text{ cu ft}}{0.0215} \approx 1{,}679\text{ cubic feet of explosive atmosphere} 0.0215 36.1 cu ft ≈ 1 , 679 cubic feet of explosive atmosphere
In theory, one gallon of liquid propane is enough to bring a 14 ft × 15 ft × 8 ft 14\text{ ft} \times 15\text{ ft} \times 8\text{ ft} 14 ft × 15 ft × 8 ft basement to its lower flammable limit if it mixed evenly.
Odorization Standards & The Odor Fade Phenomenon
In their natural refined states, both methane and propane are completely colorless, tasteless, and odorless. Without artificial odorization, hazardous leaks would accumulate undetected until triggered by an ignition source.
Odourization: The 1/5 LFL Rule
CSA B149.1 Clause 4.24 (odourization) requires natural gas supplying an occupied building to be odourized in accordance with CSA Z662 or otherwise be readily detectable, or the building must have an approved gas detection system. Commercial propane is odourized before delivery (ethyl mercaptan is the usual odourant). The odorant must impart a distinct, unpleasant, and unmistakable sulfur-like smell (frequently described as rotten cabbage or skunk spray). The industry standard odorants are sulfur-bearing organic compounds termed mercaptans (thiols) , primarily tert-butyl mercaptan, isopropyl mercaptan, or ethyl mercaptan (ethanethiol).
The detection target is that a person with a normal sense of smell can readily detect the gas at a concentration of not more than one-fifth ( 1 / 5 1/5 1/5 th or 20 % 20\% 20% ) of the lower flammable limit (LFL) in air:
Natural Gas: LFL = 4.0 % ⟹ Odorization Threshold = 4.0 % 5 = 0.8 % by volume ( 8,000 ppm ) \text{LFL} = 4.0\% \implies \text{Odorization Threshold} = \frac{4.0\%}{5} = 0.8\%\text{ by volume } (8{,}000\text{ ppm}) LFL = 4.0% ⟹ Odorization Threshold = 5 4.0% = 0.8% by volume ( 8 , 000 ppm )
Propane: LFL = 2.15 % ⟹ Odorization Threshold = 2.15 % 5 ≈ 0.43 % by volume ( 4,300 ppm ) \text{LFL} = 2.15\% \implies \text{Odorization Threshold} = \frac{2.15\%}{5} \approx 0.43\%\text{ by volume } (4{,}300\text{ ppm}) LFL = 2.15% ⟹ Odorization Threshold = 5 2.15% ≈ 0.43% by volume ( 4 , 300 ppm )
This 5 : 1 5:1 5 : 1 safety factor guarantees that occupants can perceive escaping gas long before concentrations reach the minimum threshold required for combustion.
The Odor Fade Phenomenon
Odor fade is the partial or complete loss of odorant potency in fuel gas, leaving the gas odorless and undetectable by human smell. Gas technicians must recognize the five major causes of odor fade:
Adsorption on New Steel Piping (Stripping): Active sulfur molecules in mercaptans physically bond to the internal metallic surfaces of new, unseasoned black iron, steel, or copper piping. New piping must be seasoned through repeated gas purges until internal adsorption sites are fully saturated.
Oxidation by Rust and Mill Scale: Internal iron oxide (rust, Fe 2 O 3 \text{Fe}_2\text{O}_3 Fe 2 O 3 ) and mill scale chemically react with ethyl and butyl mercaptans, converting them into disulfides ( RSSR \text{RSSR} RSSR ), which have little to no perceptible odor.
Soil Filtration in Underground Leaks: When an underground gas main or service line ruptures, escaping gas migrates through the soil toward building foundations. Moist clay, sand, and organic soil act as a chromatographic filter, adsorbing the heavy polar mercaptan molecules while allowing methane or propane vapor to pass silently into basements.
Liquid Dilution & Condensate: Water or liquid hydrocarbon condensates inside storage tanks dissolve and dilute mercaptans, reducing their vapor concentration.
Olfactory Fatigue & Masking: Continuous low-level exposure numbs human olfactory receptors within minutes (olfactory adaptation). Strong ambient scents (cooking spices, solvent fumes, construction dust) can also mask mercaptans.
Important
Never rely on your sense of smell alone to declare an area gas-free. Always verify gas tightness and atmosphere safety using calibrated combustible gas indicators (electronic sniffers), ultrasonic leak detectors, and certified bubble-test solutions.
Comparison of Natural Gas vs. Commercial Propane
Technical Property Natural Gas (Methane) Commercial Propane (HD-5)
Primary Chemical Formula CH 4 \text{CH}_4 CH 4 (Methane ≥ 85 % \ge 85\% ≥ 85% ) C 3 H 8 \text{C}_3\text{H}_8 C 3 H 8 (Propane ≥ 90 % \ge 90\% ≥ 90% )
Hydrocarbon Family Saturated Alkane / Paraffin Saturated Alkane / Paraffin
Specific Gravity (Air = 1.00) ≈ 0.60 \approx 0.60 ≈ 0.60 (Lighter than air; rises) ≈ 1.52 \approx 1.52 ≈ 1.52 (Heavier than air; sinks)
Atmospheric Boiling Point − 259 ∘ F -259^\circ\text{F} − 25 9 ∘ F ( − 162 ∘ C -162^\circ\text{C} − 16 2 ∘ C ) − 44 ∘ F -44^\circ\text{F} − 4 4 ∘ F ( − 42 ∘ C -42^\circ\text{C} − 4 2 ∘ C )
Physical State at Ambient Temp/Pressure Superheated gas (non-condensable) Saturated vapor / pressurized liquid
Liquid Specific Gravity (Water = 1.00) 0.42 to 0.45 0.42\text{ to }0.45 0.42 to 0.45 (at − 259 ∘ F -259^\circ\text{F} − 25 9 ∘ F ) 0.504 to 0.510 0.504\text{ to }0.510 0.504 to 0.510 (at 60 ∘ F 60^\circ\text{F} 6 0 ∘ F )
Liquid Density ≈ 3.5 lbs/US gal \approx 3.5\text{ lbs/US gal} ≈ 3.5 lbs/US gal (LNG) ≈ 4.20 to 4.24 lbs/US gal \approx 4.20\text{ to }4.24\text{ lbs/US gal} ≈ 4.20 to 4.24 lbs/US gal
Liquid-to-Gas Expansion Ratio ≈ 1 : 600 \approx 1:600 ≈ 1 : 600 (as cryogenic LNG) ≈ 1 : 270 \approx 1:270 ≈ 1 : 270 (at standard conditions)
Maximum Container Filling Limit Not applicable (distributed as gas) About 80 % 80\% 80% liquid by volume ( 42 % 42\% 42% of water capacity by weight for cylinders)
Gross Heating Value ≈ 1,000 BTU/cu ft \approx 1{,}000\text{ BTU/cu ft} ≈ 1 , 000 BTU/cu ft ( 37.3 MJ/m 3 37.3\text{ MJ/m}^3 37.3 MJ/m 3 ) ≈ 2,500 BTU/cu ft \approx 2{,}500\text{ BTU/cu ft} ≈ 2 , 500 BTU/cu ft ( 93.1 MJ/m 3 93.1\text{ MJ/m}^3 93.1 MJ/m 3 )
Lower Flammable Limit (LFL / LEL) 4.0 % 4.0\% 4.0% gas in air by volume 2.15 % 2.15\% 2.15% gas in air by volume
Upper Flammable Limit (UFL / UEL) 15.0 % 15.0\% 15.0% gas in air by volume 9.6 % 9.6\% 9.6% gas in air by volume
Odour Detection Target (1/5 LFL) 0.8 % 0.8\% 0.8% in air ( 1 / 5 1/5 1/5 th of 4.0 % 4.0\% 4.0% ) 0.43 % 0.43\% 0.43% in air ( 1 / 5 1/5 1/5 th of 2.15 % 2.15\% 2.15% )
Auto-Ignition Temperature ≈ 1,200 ∘ F \approx 1{,}200^\circ\text{F} ≈ 1 , 20 0 ∘ F ( 649 ∘ C 649^\circ\text{C} 64 9 ∘ C ) ≈ 920 ∘ F to 1,020 ∘ F \approx 920^\circ\text{F}\text{ to }1{,}020^\circ\text{F} ≈ 92 0 ∘ F to 1 , 02 0 ∘ F ( 493 ∘ C to 549 ∘ C 493^\circ\text{C}\text{ to }549^\circ\text{C} 49 3 ∘ C to 54 9 ∘ C )