Study guide

18.1 The Exam Conversion Sheet, Units & Dimensional Analysis

California Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: California Water Regulatory Framework & Certification Ladders

1.1 State Water Board & Regional Boards Structure 1.2 Drinking Water Certification: T1-T5 & D1-D5 Requirements 1.3 Wastewater Certification: Grades I-V & OIT Requirements 1.4 Safe Drinking Water Standards, MCLs & Emerging Contaminants 1.5 California Waterworks Standards (Title 22, Chapter 16) 1.6 Public Water System Types, Permits & the Sanitary Survey

2 Chapter 2: California Water Rights, Title 22 & Environmental Policy

2.1 California Title 22 Recycled Water Standards 2.2 California Environmental Quality Act (CEQA) & Proposition 218 2.3 Water Rights & California Water Resources

3 Chapter 3: Drinking Water Source Quality & Coagulation/Flocculation

3.1 Source Water Quality & Watershed Management 3.2 Coagulation Chemistry & Flash Mixing 3.3 Flocculation & Jar Testing 3.4 Wells, Aquifers & Groundwater Hydraulics 3.5 Raw Water Storage, Clearwells & Reservoir Management

4 Chapter 4: Clarification & Granular Media Filtration

4.1 Sedimentation & Advanced Clarification 4.2 Granular Media Filtration Mechanics & Media Types 4.3 Filter Operation, Backwash Cycles & SWTR Compliance

5 Chapter 5: Disinfection, Oxidation & Advanced Water Treatment

5.1 Chlorination Chemistry & Breakpoint Curves 5.2 Disinfection Kinetics & CT Calculations 5.3 Alternative Disinfection: Ozone, UV & Chlorine Dioxide 5.4 Advanced Treatment: Membranes, AOP & PFAS Adsorption 5.5 Chloramination & Nitrification Control 5.6 Iron & Manganese Removal 5.7 Fluoridation Practice & Compliance 5.8 Corrosion Control Treatment & Water Stability 5.9 Taste & Odor Control and Algal Toxin Management

6 Chapter 6: Wastewater Preliminary & Primary Treatment

6.1 Preliminary Treatment: Screening & Grit Removal 6.2 Primary Clarification Operations 6.3 Primary Sludge Characteristics & Pumping 6.4 Stabilization Ponds, Lagoons & Small-Plant Processes

7 Chapter 7: Secondary Biological Treatment & Activated Sludge

7.1 Activated Sludge Process Fundamentals 7.2 Process Control Parameters: F/M, MCRT & SVI 7.3 Activated Sludge Microbiology & Troubleshooting 7.4 Fixed-Film & Hybrid Biological Processes

8 Chapter 8: Biological Nutrient Removal, Water Reuse & Solids Handling

8.1 Biological Nitrogen Removal: Nitrification & Denitrification 8.2 Biological Phosphorus Removal (EBPR) & Chemical Precipitation 8.3 Anaerobic & Aerobic Digestion 8.4 Sludge Thickening, Dewatering & Biosolids Disposal 8.5 Wastewater Disinfection: Chlorination, Dechlorination & UV

9 Chapter 9: Distribution Systems, Collection Networks & Hydraulics

9.1 Hydraulics, Pressure & Flow Dynamics 9.2 Centrifugal Pumps, Motors & VFDs 9.3 Distribution Network Infrastructure & Cross-Connection Control 9.4 Wastewater Collection Systems, SSMP & FOG Management

10 Chapter 10: Laboratory Analytics, Safety & Water Math

10.1 Water & Wastewater Laboratory Methods 10.2 Laboratory Quality Assurance & Regulatory Reporting 10.3 Chemical Safety, Hazardous Gases & Confined Space 10.4 Essential Water & Wastewater Math for Operators

11 Chapter 11: Federal & California Drinking Water Rules

11.1 The Revised Total Coliform Rule & Assessments 11.2 The Lead and Copper Rule and Service Line Replacement 11.3 Surface Water Treatment Rules & Log Removal Credit 11.4 Stage 1 & Stage 2 Disinfection Byproduct Rules 11.5 Secondary MCLs, Notification Levels & Response Levels 11.6 Public Notification, Consumer Confidence Reports & Recordkeeping

12 Chapter 12: Distribution System Design, Demand & Hydraulics

12.1 System Layout, Pressure Zones & Distribution Maps 12.2 Water Demand, Peaking Factors & Fire Flow 12.3 Distribution Storage: Types, Sizing & Turnover 12.4 Head Loss, C-Factor & Distribution Hydraulic Calculations 12.5 Water Hammer, Surge Control & Air Management

13 Chapter 13: Distribution Equipment Operation, Maintenance & Inspection

13.1 Valves: Types, Operation & Exercising Programs 13.2 Fire Hydrants: Types, Testing & Maintenance 13.3 Water Meters: Types, Accuracy & Meter Management 13.4 Instrumentation, In-Line Sensors, Telemetry & SCADA 13.5 Electrical Systems, Motors & Standby Generators 13.6 External Corrosion, Cathodic Protection & Asset Inspection

14 Chapter 14: Water Mains, Piping & Field Construction

14.1 Pipe Materials & Pipe Selection 14.2 Joints, Fittings, Thrust Restraint & Bedding 14.3 Main Installation, Tapping & Service Line Installation 14.4 Leak Detection, Water Loss Auditing & Main Repair 14.5 Main Cleaning & Maintenance: Flushing, Pigging & Lining 14.6 Excavation, Trench Safety & Utility Locating

15 Chapter 15: Disinfecting Distribution Facilities & Maintaining Water Quality

15.1 Water Main Disinfection (AWWA C651) 15.2 Disinfecting Storage Reservoirs (C652) & Wells (C654) 15.3 Maintaining Distribution Water Quality: Residual, Biofilm & Discolored Water 15.4 Cross-Connection Control Program Administration & Device Testing

16 Chapter 16: Plant Equipment, Chemical Feed & Maintenance

16.1 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 16.2 Gas Chlorination Equipment & Hypochlorite Systems 16.3 Blowers, Compressors & Aeration Equipment 16.4 Flow Measurement Devices: Meters, Weirs & Flumes 16.5 Preventive Maintenance, CMMS & Asset Management

17 Chapter 17: Utility Management, Administration & Emergency Response

17.1 Planning, Organizing, Directing & Controlling a Utility Work Group 17.2 Budgets, Water Rates & Financial Management 17.3 Operator Training, Staffing & Safety Program Development 17.4 Energy Management & Optimization 17.5 Emergency Response Planning, Risk & Resilience & Security 17.6 Water Conservation Planning & Drought Response

18 Chapter 18: Applied Operator Mathematics Workshop

18.1 The Exam Conversion Sheet, Units & Dimensional Analysis 18.2 Distribution & Hydraulic Math Workshop 18.3 Treatment & Wastewater Process Math Workshop

18.1 The Exam Conversion Sheet, Units & Dimensional Analysis

Key Takeaways Explain This Topic AI

The State Water Board provides an Exam Conversion Sheet at the examination, so the task is knowing which formula to apply rather than memorizing all of them.

The conversion sheet gives 1 percent equals 10,000 mg/L, 1 gpg equals 17.1 mg/L, 1 MGD equals 694.4 gpm and 1.55 cfs, and 1 psi equals 2.31 feet of water.

Dimensional analysis, in which units are carried through every step and cancelled, catches most setup errors before arithmetic begins.

23 CCR 3701(b) requires wastewater examinations at every grade to include mathematical problems related to process control and evaluation.

The most common exam math errors are unit mismatches, forgetting to divide by purity, and using theoretical detention time where T10 is required.

Last updated: September 2026

You Get a Formula Sheet

The State Water Board publishes an Exam Conversion Sheet and provides it during the drinking water treatment and distribution examinations. That single fact reframes what preparation means: you are not being tested on whether you memorized 3,960 - you are being tested on whether you can identify what is being asked, choose the right relationship, get the units right, and interpret the answer.

The sheet's core conversions, worth knowing cold anyway because you will use them daily:

  • Quantity Conversion
  • Percent to concentration 1 % = 10,000 mg/L = 10,000 ppm
  • Concentration equivalence 1 mg/L = 1 ppm
  • Grains per gallon 1 gpg = 17.1 mg/L
  • Water weight 1 gal (H₂O) = 8.34 lb ; 1 ft³ (H₂O) = 62.3832 lb
  • Volume 1 ft³ = 7.48 gal ; 1 acre-foot = 325,851 gal ; 1 CCF = 100 ft³ = 748 gal
  • Area 1 acre = 43,560 ft²
  • Flow 1 MGD = 694.4 gpm = 1.55 cfs ; 1 cfs = 448.8 gpm
  • Pressure and head 1 psi = 2.31 ft ; 1 ft (H₂O) = 0.433 psi
  • Time 1 day = 1,440 min = 86,400 s
  • Power 1 hp = 0.746 kW = 746 W = 33,000 ft-lb/min
  • Mass 1 lb = 454 g = 7,000 grains; 1 ton = 2,000 lb
  • Length 1 mile = 5,280 ft; 1 yd = 3 ft; 1 yd³ = 27 ft³

And the geometry: Area of a circle = 0.785 × D 2 Circumference = 3.14 × D \text{Area of a circle} = 0.785 \times D^{2} \qquad \text{Circumference} = 3.14 \times D Area of a circle = 0.785 × D 2 Circumference = 3.14 × D Cylinder volume (gal) = 0.785 × D 2 × Height (ft) × 7.48 \text{Cylinder volume (gal)} = 0.785 \times D^{2} \times \text{Height (ft)} \times 7.48 Cylinder volume (gal) = 0.785 × D 2 × Height (ft) × 7.48 Rectangular basin (gal) = L × W × H × 7.48 \text{Rectangular basin (gal)} = L \times W \times H \times 7.48 Rectangular basin (gal) = L × W × H × 7.48

Important

On the wastewater side, 23 CCR 3701(b) requires that examinations at every grade include "mathematical problems related to process control and evaluation." There is no grade at which you can avoid the math, and the difficulty scales: Grade I problems are conversions and simple dosage, Grade III adds "limitations, controls, and performance calculations for primary and secondary treatment and sludge-handling processes," and Grade IV adds the same for tertiary processes plus budget development and control .

Dimensional Analysis: The Method That Prevents Errors

Write every quantity with its units, arrange the expression so unwanted units cancel, and confirm that what remains is the unit you were asked for. If the units do not come out right, the setup is wrong and no amount of careful arithmetic will fix it.

Example. Convert 2.4 MGD to gpm using only cancellation: 2.4 MG day × 1,000,000 gal 1 MG × 1 day 1,440 min = 1,667 gpm 2.4 \frac{\text{MG}}{\text{day}} \times \frac{1{,}000{,}000 \text{ gal}}{1 \text{ MG}} \times \frac{1 \text{ day}}{1{,}440 \text{ min}} = \textbf{1,667 gpm} 2.4 day MG ​ × 1 MG 1 , 000 , 000 gal ​ × 1 , 440 min 1 day ​ = 1,667 gpm

MG cancels, day cancels, gal/min remains. (Checking against the sheet: 2.4 x 694.4 = 1,667. Same answer, two routes.)

Example. A basin is 60 ft x 22 ft with a water depth of 13 ft . How many gallons? 60 ft × 22 ft × 13 ft = 17,160 ft 3 × 7.48 gal ft 3 = 128,357 gal 60 \text{ ft} \times 22 \text{ ft} \times 13 \text{ ft} = 17{,}160 \text{ ft}^3 \times \frac{7.48 \text{ gal}}{\text{ft}^3} = \textbf{128,357 gal} 60 ft × 22 ft × 13 ft = 17 , 160 ft 3 × ft 3 7.48 gal ​ = 128,357 gal

Example. A well casing is 10 inches in diameter with 300 ft of standing water. 0.785 × ( 10 / 12 ft ) 2 × 300 ft × 7.48 = 0.785 × 0.694 × 300 × 7.48 = 1,223 gal 0.785 \times (10/12 \text{ ft})^2 \times 300 \text{ ft} \times 7.48 = 0.785 \times 0.694 \times 300 \times 7.48 = \textbf{1,223 gal} 0.785 × ( 10/12 ft ) 2 × 300 ft × 7.48 = 0.785 × 0.694 × 300 × 7.48 = 1,223 gal

Or with the shortcut gal/ft = 0.0408 × D²(in) : 0.0408 x 100 x 300 = 1,224 gal . The small difference is rounding; both are acceptable.

The Pounds Formula: One Relationship, Many Questions lb/day = Flow (MGD) × Concentration (mg/L) × 8.34 \text{lb/day} = \text{Flow (MGD)} \times \text{Concentration (mg/L)} \times 8.34 lb/day = Flow (MGD) × Concentration (mg/L) × 8.34

This single expression answers questions about chemical feed, organic loading, solids loading, sludge mass, and removal - it is the most-used formula in the trade. 8.34 is the weight of a gallon of water in pounds , so the formula is really "gallons times concentration times weight per gallon."

Rearranged: mg/L = lb/day Flow (MGD) × 8.34 Flow (MGD) = lb/day mg/L × 8.34 \text{mg/L} = \frac{\text{lb/day}}{\text{Flow (MGD)} \times 8.34} \qquad \text{Flow (MGD)} = \frac{\text{lb/day}}{\text{mg/L} \times 8.34} mg/L = Flow (MGD) × 8.34 lb/day ​ Flow (MGD) = mg/L × 8.34 lb/day ​

Example, three ways. A plant treats 3.6 MGD with an influent BOD of 215 mg/L .

Load = 3.6 x 215 x 8.34 = 6,455 lb/day

The same plant feeds 48 lb/day of a coagulant.

Dose = 48 / (3.6 x 8.34) = 48 / 30.0 = 1.6 mg/L

The plant must deliver 6,455 lb/day at 180 mg/L .

  • Flow = 6,455 / (180 x 8.34) = 6,455 / 1,501 = 4.30 MGD
  • When 8.34 Is Not Right

The 8.34 factor assumes water at a specific gravity of 1.0. For a chemical solution , use its actual weight per gallon: lb/gal = Solution % 100 × 8.34 × Specific Gravity \text{lb/gal} = \frac{\text{Solution \%}}{100} \times 8.34 \times \text{Specific Gravity} lb/gal = 100 Solution % ​ × 8.34 × Specific Gravity

For sludge , the specific gravity is typically taken as 1.0 for thin sludges and slightly higher for thickened sludge; for lime slurry, ferric chloride, or 50 percent caustic , the weight per gallon is substantially more than 8.34 and must be used.

Flow, Velocity, and Detention Time Q = A × V V = Q A A = Q V Q = A \times V \qquad V = \frac{Q}{A} \qquad A = \frac{Q}{V} Q = A × V V = A Q ​ A = V Q ​

In operator units: Q gpm = 2.448 × D ( in ) 2 × V ( ft/s ) Q_{\text{gpm}} = 2.448 \times D^{2}_{(\text{in})} \times V_{(\text{ft/s})} Q gpm ​ = 2.448 × D ( in ) 2 ​ × V ( ft/s ) ​ Detention Time = Volume Flow \text{Detention Time} = \frac{\text{Volume}}{\text{Flow}} Detention Time = Flow Volume ​

Example. A 14-inch main carries 1,500 gpm .

V = 1,500 / (2.448 x 196) = 1,500 / 479.8 = 3.13 ft/s

Example. A 420,000-gallon basin at 2.8 MGD .

  • Flow = 2.8 x 694.4 = 1,944 gpm
  • DT = 420,000 / 1,944 = 216 minutes = 3.6 hours

Warning

Detention time and contact time are not the same number. Detention time is volume divided by flow. T10 contact time for a CT calculation is detention time multiplied by the baffling factor (0.1 unbaffled, 0.3 poor, 0.5 average, 0.7 superior). Using theoretical detention time in a CT calculation overstates disinfection - it is one of the most consequential errors an operator can make, and it appears on exams constantly.

The Five Recurring Setup Errors

  • Error Example Fix
  • Unit mismatch Using gpm where the formula wants MGD Convert first, then compute; carry units through

Forgetting purity or available chlorine 100 lb of chlorine ordered when the product is 65 percent HTH Always divide by the purity or available fraction

Using detention time instead of T10 CT computed on theoretical DT Multiply by the baffling factor

Diameter versus radius Using D where the formula wants r, or forgetting to convert inches to feet The operator formula uses 0.785 × D² , so it wants diameter , in feet

Percent as a decimal or a whole number Dividing by 65 instead of 0.65 Write it as a decimal fraction every time

Sanity Checks

Before writing the answer down, ask three questions:

Is the order of magnitude plausible? A chemical dose of 4,000 mg/L is not a dose, it is a spill. A detention time of 0.02 minutes is not a clarifier.

Do the units match what was asked? lb/day, mg/L, gpm, gal, ft/s, hours - the question named one.

Does it move the right direction? More flow at the same dose means more pounds per day. A lower C-factor means more head loss. Higher MLSS at the same food means a lower F/M.

Tip

On a multiple-choice exam, the distractors are built from the classic errors. If a dosage problem offers an answer that is exactly your result multiplied by 0.65, you forgot to divide by purity. If it offers an answer 1.44 times yours, you mixed up per-minute and per-day. Recognizing that a distractor is an error you almost made is a legitimate and fast way to confirm your work.