Study guide

5.3 Alternative Disinfection: Ozone, UV & Chlorine Dioxide

California Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: California Water Regulatory Framework & Certification Ladders

1.1 State Water Board & Regional Boards Structure 1.2 Drinking Water Certification: T1-T5 & D1-D5 Requirements 1.3 Wastewater Certification: Grades I-V & OIT Requirements 1.4 Safe Drinking Water Standards, MCLs & Emerging Contaminants 1.5 California Waterworks Standards (Title 22, Chapter 16) 1.6 Public Water System Types, Permits & the Sanitary Survey

2 Chapter 2: California Water Rights, Title 22 & Environmental Policy

2.1 California Title 22 Recycled Water Standards 2.2 California Environmental Quality Act (CEQA) & Proposition 218 2.3 Water Rights & California Water Resources

3 Chapter 3: Drinking Water Source Quality & Coagulation/Flocculation

3.1 Source Water Quality & Watershed Management 3.2 Coagulation Chemistry & Flash Mixing 3.3 Flocculation & Jar Testing 3.4 Wells, Aquifers & Groundwater Hydraulics 3.5 Raw Water Storage, Clearwells & Reservoir Management

4 Chapter 4: Clarification & Granular Media Filtration

4.1 Sedimentation & Advanced Clarification 4.2 Granular Media Filtration Mechanics & Media Types 4.3 Filter Operation, Backwash Cycles & SWTR Compliance

5 Chapter 5: Disinfection, Oxidation & Advanced Water Treatment

5.1 Chlorination Chemistry & Breakpoint Curves 5.2 Disinfection Kinetics & CT Calculations 5.3 Alternative Disinfection: Ozone, UV & Chlorine Dioxide 5.4 Advanced Treatment: Membranes, AOP & PFAS Adsorption 5.5 Chloramination & Nitrification Control 5.6 Iron & Manganese Removal 5.7 Fluoridation Practice & Compliance 5.8 Corrosion Control Treatment & Water Stability 5.9 Taste & Odor Control and Algal Toxin Management

6 Chapter 6: Wastewater Preliminary & Primary Treatment

6.1 Preliminary Treatment: Screening & Grit Removal 6.2 Primary Clarification Operations 6.3 Primary Sludge Characteristics & Pumping 6.4 Stabilization Ponds, Lagoons & Small-Plant Processes

7 Chapter 7: Secondary Biological Treatment & Activated Sludge

7.1 Activated Sludge Process Fundamentals 7.2 Process Control Parameters: F/M, MCRT & SVI 7.3 Activated Sludge Microbiology & Troubleshooting 7.4 Fixed-Film & Hybrid Biological Processes

8 Chapter 8: Biological Nutrient Removal, Water Reuse & Solids Handling

8.1 Biological Nitrogen Removal: Nitrification & Denitrification 8.2 Biological Phosphorus Removal (EBPR) & Chemical Precipitation 8.3 Anaerobic & Aerobic Digestion 8.4 Sludge Thickening, Dewatering & Biosolids Disposal 8.5 Wastewater Disinfection: Chlorination, Dechlorination & UV

9 Chapter 9: Distribution Systems, Collection Networks & Hydraulics

9.1 Hydraulics, Pressure & Flow Dynamics 9.2 Centrifugal Pumps, Motors & VFDs 9.3 Distribution Network Infrastructure & Cross-Connection Control 9.4 Wastewater Collection Systems, SSMP & FOG Management

10 Chapter 10: Laboratory Analytics, Safety & Water Math

10.1 Water & Wastewater Laboratory Methods 10.2 Laboratory Quality Assurance & Regulatory Reporting 10.3 Chemical Safety, Hazardous Gases & Confined Space 10.4 Essential Water & Wastewater Math for Operators

11 Chapter 11: Federal & California Drinking Water Rules

11.1 The Revised Total Coliform Rule & Assessments 11.2 The Lead and Copper Rule and Service Line Replacement 11.3 Surface Water Treatment Rules & Log Removal Credit 11.4 Stage 1 & Stage 2 Disinfection Byproduct Rules 11.5 Secondary MCLs, Notification Levels & Response Levels 11.6 Public Notification, Consumer Confidence Reports & Recordkeeping

12 Chapter 12: Distribution System Design, Demand & Hydraulics

12.1 System Layout, Pressure Zones & Distribution Maps 12.2 Water Demand, Peaking Factors & Fire Flow 12.3 Distribution Storage: Types, Sizing & Turnover 12.4 Head Loss, C-Factor & Distribution Hydraulic Calculations 12.5 Water Hammer, Surge Control & Air Management

13 Chapter 13: Distribution Equipment Operation, Maintenance & Inspection

13.1 Valves: Types, Operation & Exercising Programs 13.2 Fire Hydrants: Types, Testing & Maintenance 13.3 Water Meters: Types, Accuracy & Meter Management 13.4 Instrumentation, In-Line Sensors, Telemetry & SCADA 13.5 Electrical Systems, Motors & Standby Generators 13.6 External Corrosion, Cathodic Protection & Asset Inspection

14 Chapter 14: Water Mains, Piping & Field Construction

14.1 Pipe Materials & Pipe Selection 14.2 Joints, Fittings, Thrust Restraint & Bedding 14.3 Main Installation, Tapping & Service Line Installation 14.4 Leak Detection, Water Loss Auditing & Main Repair 14.5 Main Cleaning & Maintenance: Flushing, Pigging & Lining 14.6 Excavation, Trench Safety & Utility Locating

15 Chapter 15: Disinfecting Distribution Facilities & Maintaining Water Quality

15.1 Water Main Disinfection (AWWA C651) 15.2 Disinfecting Storage Reservoirs (C652) & Wells (C654) 15.3 Maintaining Distribution Water Quality: Residual, Biofilm & Discolored Water 15.4 Cross-Connection Control Program Administration & Device Testing

16 Chapter 16: Plant Equipment, Chemical Feed & Maintenance

16.1 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 16.2 Gas Chlorination Equipment & Hypochlorite Systems 16.3 Blowers, Compressors & Aeration Equipment 16.4 Flow Measurement Devices: Meters, Weirs & Flumes 16.5 Preventive Maintenance, CMMS & Asset Management

17 Chapter 17: Utility Management, Administration & Emergency Response

17.1 Planning, Organizing, Directing & Controlling a Utility Work Group 17.2 Budgets, Water Rates & Financial Management 17.3 Operator Training, Staffing & Safety Program Development 17.4 Energy Management & Optimization 17.5 Emergency Response Planning, Risk & Resilience & Security 17.6 Water Conservation Planning & Drought Response

18 Chapter 18: Applied Operator Mathematics Workshop

18.1 The Exam Conversion Sheet, Units & Dimensional Analysis 18.2 Distribution & Hydraulic Math Workshop 18.3 Treatment & Wastewater Process Math Workshop

5.3 Alternative Disinfection: Ozone, UV & Chlorine Dioxide

Key Takeaways Explain This Topic AI

Ozone (O₃, oxidation potential 2.07 V) is a potent oxidant generated via corona discharge from dry air or liquid oxygen (LOX) that rapidly inactivates chlorine-resistant Cryptosporidium oocysts and destroys taste and odor compounds (MIB, geosmin).

Ozonation of source waters containing bromide (Br⁻) forms the regulated carcinogenic disinfection byproduct bromate (BrO₃⁻, MCL 10 µg/L), which is controlled via acid addition (pH suppression to 6.0–6.5), ammonia addition, or staged dosing.

Ultraviolet (UV) disinfection operates at a germicidal UVC wavelength of ~254 nm, photochemically dimerizing thymine bases in microbial DNA/RNA to prevent replication without generating regulated halogenated DBPs.

UV reactors utilize Low-Pressure High-Output (LPHO) or Medium-Pressure (MP) mercury arc lamps, with delivered dose (mJ/cm²) governed by UV Transmittance (UVT %), lamp sleeve quartz fouling, and bioassay validation using MS2 bacteriophage.

Chlorine dioxide (ClO₂, 2.63x oxidizing capacity of chlorine) is a selective dissolved gas oxidant generated on-site from sodium chlorite (NaClO₂) that does not form trihalomethanes (TTHM) or haloacetic acids (HAA5), but is regulated for chlorite (ClO₂⁻, MCL 1.0 mg/L) and chlorate (ClO₃⁻) byproducts.

Last updated: August 2026

Alternative Disinfection: Ozone, UV & Chlorine Dioxide

While chlorination remains the dominant disinfection technology in North America, stringent regulatory limits on halogenated Disinfection Byproducts (DBPs) —specifically Total Trihalomethanes (TTHMs) and Five Haloacetic Acids (HAA5) under the EPA Stage 1 and Stage 2 Disinfectants and Disinfection Byproducts Rules—alongside the discovery of chlorine-resistant pathogens like Cryptosporidium parvum , have driven the widespread adoption of advanced alternative disinfectants.

Water and wastewater treatment facilities increasingly deploy Ozonation ( O 3 O_3 O 3 ​ ) , Ultraviolet (UV) Disinfection , and Chlorine Dioxide ( C l O 2 ClO_2 Cl O 2 ​ ) as primary disinfectants and advanced oxidants.

Oxidant Chemical Species Chemical Formula / Symbol Standard Oxidation Potential ( E ∘ E^\circ E ∘ , Volts) Relative Oxidation Power vs. Chlorine

  • Hydroxyl Free Radical ∙ OH \bullet\text{OH} ∙ OH 2.80 V 2.06x
  • Ozone O 3 \text{O}_3 O 3 ​ 2.07 V 1.52x
  • Hydrogen Peroxide H 2 O 2 \text{H}_2\text{O}_2 H 2 ​ O 2 ​ 1.78 V 1.31x
  • Potassium Permanganate KMnO 4 \text{KMnO}_4 KMnO 4 ​ 1.68 V 1.24x
  • Chlorine Dioxide ClO 2 \text{ClO}_2 ClO 2 ​ 1.57 V 1.15x (2.63x stoichiometric oxidation capacity)
  • Hypochlorous Acid HOCl \text{HOCl} HOCl 1.49 V 1.10x
  • Gaseous Chlorine Cl 2 \text{Cl}_2 Cl 2 ​ 1.36 V 1.00x (Baseline)
  • Hypochlorite Ion OCl − \text{OCl}^- OCl − 0.89 V 0.65x
  • 1. Ozonation ( O 3 O_3 O 3 ​ ) Systems & Process Chemistry

Ozone ( O 3 O_3 O 3 ​ ) is an unstable, pale blue gas with a sharp, pungent odor. Possessing a standard oxidation potential of 2.07 V , ozone is one of the most powerful oxidants utilized in water treatment.

Ozone Generation Physics

Because ozone is thermodynamically unstable and rapidly decomposes into diatomic oxygen ( O 2 O_2 O 2 ​ ), it cannot be shipped or stored and must be generated on-site continuously:

Feed Gas Preparation: Ozone is produced from either clean, ambient air compressed and dried to a severe dew point ( < − 60 ∘ C or − 76 ∘ F < -60^\circ\text{C} \text{ or } -76^\circ\text{F} < − 6 0 ∘ C or − 7 6 ∘ F ) to prevent corrosive nitric acid ( H N O 3 HNO_3 H N O 3 ​ ) formation, or high-purity Liquid Oxygen (LOX, >93% purity) .

Dielectric Barrier Corona Discharge: The prepared oxygen gas passes through a narrow discharge gap between two high-voltage electrodes separated by a dielectric barrier (glass or ceramic). A high-voltage AC electric field (6,000 to 20,000 volts at frequencies up to several kilohertz) dissociates diatomic oxygen molecules ( O 2 O_2 O 2 ​ ) into oxygen radicals, which collide with intact oxygen molecules to form ozone: O 2 + e − ⟶ 2 O ∙ \text{O}_2 + e^- \longrightarrow 2\text{O}^\bullet O 2 ​ + e − ⟶ 2 O ∙ O ∙ + O 2 + M ⟶ O 3 + M \text{O}^\bullet + \text{O}_2 + M \longrightarrow \text{O}_3 + M O ∙ + O 2 ​ + M ⟶ O 3 ​ + M

Air-fed generators produce 1% to 3% ozone by weight .

LOX-fed systems achieve 8% to 14% ozone by weight with significantly lower energy consumption per pound of ozone generated. ┌──────────────────────────────────────────────────────────────────────────┐

  • │ Ozone Contactor & Destruct Train │
  • ├──────────────────────────────────────────────────────────────────────────┤
  • │ [LOX / Air Prep] ──► [Corona Discharge Generator] │
  • │ │ │
  • │ ▼ Ozone Gas Injection │
  • │ [Raw/Clarified Water] ──► [Multi-Stage Deep Contactor (18-22 ft)] │
  • │ │ │
  • │ ┌────────────────────────┴────────────────────────┐ │
  • │ ▼ Off-Gas (Contactor Headspace) ▼ Ozone Residual │
  • │ [Demister & Preheater] [Ozonated Water to Biological │
  • │ │ Activated Carbon / Filters] │
  • │ ▼ │
  • │ [Thermal (300°C) or Catalytic (MnO₂) Destruct Unit] │
  • │ │ │
  • │ ▼ Safe Ambient Exhaust (< 0.1 ppm O₃) │
  • └──────────────────────────────────────────────────────────────────────────┘
  • Ozone Contact Basins & Off-Gas Destruction

Contact Chambers: Ozone contactors are deep concrete structures (typically 18 to 22 feet deep to maximize gas dissolution) featuring multiple over-under baffle chambers. Ozone is transferred into the water column via fine-bubble porous ceramic diffusers or pressurized side-stream venturi injection systems.

Off-Gas Destruction: Ozone is toxic to human respiratory systems, with an OSHA Permissible Exposure Limit (PEL) of 0.1 ppm (8-hr TWA) and an Immediately Dangerous to Life or Health (IDLH) threshold of 5.0 ppm . Undissolved ozone gas collecting in the contactor headspace must be routed through ozone destruct units —using high-temperature thermal destruction (300°C to 350°C) or catalytic manganese dioxide ( M n O 2 MnO_2 M n O 2 ​ ) beds—to convert residual O 3 O_3 O 3 ​ back into diatomic oxygen ( O 2 O_2 O 2 ​ ) before atmospheric discharge.

Ozone Applications & Disinfection Byproduct Control

Pathogen Inactivation: Ozone is hundreds of times more effective than free chlorine against Giardia cysts and Cryptosporidium oocysts, achieving 2-log to 3-log Cryptosporidium inactivation at modest C T CT CT values ( C T ≈ 5 to 15 mg ⋅ min/L CT \approx 5\text{ to } 15\text{ mg}\cdot\text{min/L} CT ≈ 5 to 15 mg ⋅ min/L depending on temperature).

Oxidation of Micropollutants: Ozone rapidly cleaves aromatic rings and carbon-carbon double bonds, destroying taste-and-odor compounds ( 2-Methylisoborneol [MIB] and geosmin ), cyanotoxins (microcystins), iron, manganese, color, and pharmaceutical residues.

Bromate ( B r O 3 − BrO_3^- B r O 3 − ​ ) Formation & Mitigation: When raw water contains natural bromide ions ( B r − Br^- B r − ), ozone oxidizes bromide to hypobromous acid ( H O B r / O B r − HOBr/OBr^- H OB r / OB r − ) and subsequently to bromate ( B r O 3 − BrO_3^- B r O 3 − ​ ) , a potent human carcinogen regulated with a strict MCL of 10 µg/L (0.010 mg/L) : Br − + O 3 ⟶ OBr − + O 2 \text{Br}^- + \text{O}_3 \longrightarrow \text{OBr}^- + \text{O}_2 Br − + O 3 ​ ⟶ OBr − + O 2 ​ OBr − + 2 O 3 ⟶ BrO 3 − + 2 O 2 \text{OBr}^- + 2\text{O}_3 \longrightarrow \text{BrO}_3^- + 2\text{O}_2 OBr − + 2 O 3 ​ ⟶ BrO 3 − ​ + 2 O 2 ​

Warning

Bromate Control Strategies:

Acid Addition (pH Depression): Lowering contactor water pH to 6.0–6.5 shifts the equilibrium from hypobromite ion ( O B r − OBr^- OB r − ) to hypobromous acid ( H O B r HOBr H OB r ), suppressing the rate of bromate formation.

Ammonia Addition: Adding low doses of ammonia ( 0.1 – 0.3 mg/L 0.1\text{–}0.3\text{ mg/L} 0.1 – 0.3 mg/L ) binds with hypobromous acid to form bromamines ( N H 2 B r NH_2Br N H 2 ​ B r ), sequestering bromine away from the bromate pathway.

Hydrogen Peroxide Addition: H 2 O 2 H_2O_2 H 2 ​ O 2 ​ reduces hypobromite back to bromide ( B r − Br^- B r − ).

2. Ultraviolet (UV) Disinfection Mechanics

Ultraviolet (UV) disinfection is a physical, chemical-free process that inactivates pathogens without creating regulated halogenated DBPs or adding chemical mass to the water stream. ┌──────────────────────────────────────────────────────────────────────────┐

  • │ Ultraviolet Germicidal Mechanism │
  • ├──────────────────────────────────────────────────────────────────────────┤
  • │ UVC Photons (~254 nm) Strike Microbial Cell │
  • │ │ │
  • │ ▼ │
  • │ Absorbed by DNA / RNA Pyrimidine Bases (Thymine / Uracil) │
  • │ │ │
  • │ ▼ │
  • │ Forms Cyclobutane Pyrimidine Dimers (Thymine Dimers C=C Bond) │
  • │ │ │
  • │ ▼ │
  • │ Blocks DNA Polymerase Transcription & Cell Replication │
  • │ │ │
  • │ ▼ │
  • │ Microorganism Rendered Completely Non-Infectious (Sterilized) │
  • └──────────────────────────────────────────────────────────────────────────┘
  • Photochemical Germicidal Mechanism

UV light occupies the electromagnetic spectrum between 100 nm and 400 nm. Germicidal UV (UVC band, specifically 200 to 280 nm , with peak absorption at 254 to 265 nm ) is absorbed by microbial nucleic acids (DNA and RNA). The photon energy induces adjacent thymine bases (in DNA) or uracil bases (in RNA) to form covalent carbon-carbon bonds, creating cyclobutane pyrimidine dimers (thymine dimers) . These dimers distort the DNA double helix, preventing DNA polymerase from transcribing or replicating the genetic code. The pathogen is not physically ruptured or lysed, but is permanently sterilized and incapable of causing infection.

UV Lamp Technologies

  • Feature Low-Pressure High-Output (LPHO) Lamps Medium-Pressure (MP) Lamps
  • Emission Spectrum Monochromatic (almost exclusively at 253.7 nm) Polychromatic broad-spectrum (200 to 300+ nm)
  • Lamp Surface Operating Temp 40°C to 100°C (104°F to 212°F) 600°C to 900°C (1,112°F to 1,652°F)
  • Electrical-to-UVC Efficiency 35% to 40% (High efficiency) 10% to 15% (Lower efficiency)
  • Power Density per Lamp Moderate (requires more lamps) Extremely High (compact footprint, fewer lamps)
  • Quartz Sleeve Scaling Potential Low to Moderate Severe (high heat bakes hardness/iron onto quartz)
  • Typical Lamp Lifetime 12,000 to 16,000 hours 4,000 to 8,000 hours
  • Operating Parameters & Sizing Formulas

UV Dose (Fluence): UV Dose ( mJ/cm 2 ) = UV Intensity ( mW/cm 2 ) × Exposure Time ( seconds ) \text{UV Dose } (\text{mJ/cm}^2) = \text{UV Intensity } (\text{mW/cm}^2) \times \text{Exposure Time } (\text{seconds}) UV Dose ( mJ/cm 2 ) = UV Intensity ( mW/cm 2 ) × Exposure Time ( seconds ) (Note: 1 mJ/cm 2 = 1 mWs/cm 2 = 10 J/m 2 1\text{ mJ/cm}^2 = 1\text{ mWs/cm}^2 = 10\text{ J/m}^2 1 mJ/cm 2 = 1 mWs/cm 2 = 10 J/m 2 )

UV Transmittance (UVT %): The percentage of light at 254 nm that passes through a 1-cm quartz water cell relative to pure deionized water. UVT is reduced by dissolved organic carbon (DOC), iron ( F e 2 + / F e 3 + Fe^{2+}/Fe^{3+} F e 2 + / F e 3 + ), manganese, and suspended turbidity particles. Typical surface waters have a UVT of 85% to 95% ; tertiary recycled water ranges from 65% to 80% .

Quartz Sleeve Fouling & Cleaning: Submerged mercury arc lamps are encased within high-purity fused quartz sleeves. Mineral foulants (calcium, magnesium, iron) and organic biofilms precipitate onto the sleeve surface, reducing UV output. Automated mechanical wipers equipped with Teflon rings, paired with periodic chemical flushes using citric acid or phosphoric acid , clean the sleeves without taking the reactor offline.

Bioassay Validation: Per the EPA UV Disinfection Guidance Manual (UVDGM), UV reactors cannot be rated solely by theoretical modeling. Systems must undergo physical biodosimetry validation testing using non-pathogenic challenge microorganisms (such as MS2 bacteriophage or Bacillus subtilis spores) across various flow rates and UVT conditions to determine the Reduction Equivalent Dose (RED) .

Pathogen Target 1.0-Log (90%) Inactivation 2.0-Log (99%) Inactivation 3.0-Log (99.9%) Inactivation 4.0-Log (99.99%) Inactivation

Cryptosporidium oocysts 2.5 mJ/cm 2 2.5\text{ mJ/cm}^2 2.5 mJ/cm 2 5.8 mJ/cm 2 5.8\text{ mJ/cm}^2 5.8 mJ/cm 2 12.0 mJ/cm 2 12.0\text{ mJ/cm}^2 12.0 mJ/cm 2 22.0 mJ/cm 2 22.0\text{ mJ/cm}^2 22.0 mJ/cm 2

Giardia lamblia cysts 2.1 mJ/cm 2 2.1\text{ mJ/cm}^2 2.1 mJ/cm 2 5.2 mJ/cm 2 5.2\text{ mJ/cm}^2 5.2 mJ/cm 2 11.0 mJ/cm 2 11.0\text{ mJ/cm}^2 11.0 mJ/cm 2 22.0 mJ/cm 2 22.0\text{ mJ/cm}^2 22.0 mJ/cm 2

Enteric Viruses 58.0 mJ/cm 2 58.0\text{ mJ/cm}^2 58.0 mJ/cm 2 100.0 mJ/cm 2 100.0\text{ mJ/cm}^2 100.0 mJ/cm 2 143.0 mJ/cm 2 143.0\text{ mJ/cm}^2 143.0 mJ/cm 2 186.0 mJ/cm 2 186.0\text{ mJ/cm}^2 186.0 mJ/cm 2

Note

UV Pathogen Vulnerability Comparison: Notice that protozoan parasites ( Cryptosporidium and Giardia ) are extraordinarily sensitive to UV irradiation, requiring only 12 mJ/cm² for 3-log inactivation . In contrast, enteric viruses (such as Adenovirus) possess double-stranded DNA or compact protein capsids that require 186 mJ/cm² for 4-log inactivation . Consequently, UV is typically paired with downstream free chlorine or chloramines in multi-barrier systems.

3. Chlorine Dioxide ( C l O 2 ClO_2 Cl O 2 ​ ) Systems

Chlorine dioxide ( C l O 2 ClO_2 Cl O 2 ​ ) is a synthetic dissolved gas oxidant that exists as a true dissolved gas in water without hydrolyzing into hypochlorous acid or hypochlorite ions.

Oxidation Chemistry & Generation

Oxidizing Capacity: Chlorine dioxide has an oxidation state of + 4 +4 + 4 . In water, it undergoes a 5-electron reduction to chloride ( C l − Cl^- C l − ): ClO 2 + 5 e − + 4 H + ⟶ Cl − + 2 H 2 O \text{ClO}_2 + 5e^- + 4\text{H}^+ \longrightarrow \text{Cl}^- + 2\text{H}_2\text{O} ClO 2 ​ + 5 e − + 4 H + ⟶ Cl − + 2 H 2 ​ O Because of this 5-electron transfer, C l O 2 ClO_2 Cl O 2 ​ has 2.63 times the oxidizing capacity of chlorine on an equivalent weight basis.

On-Site Generation: Gaseous chlorine dioxide is unstable and explosive at air concentrations above 10% by volume . It is generated on site as an aqueous solution using specialized vacuum-driven reactors:

Chlorine Gas - Sodium Chlorite Method: 2 NaClO 2 + Cl 2 ⟶ 2 ClO 2 + 2 NaCl 2\text{NaClO}_2 + \text{Cl}_2 \longrightarrow 2\text{ClO}_2 + 2\text{NaCl} 2 NaClO 2 ​ + Cl 2 ​ ⟶ 2 ClO 2 ​ + 2 NaCl

Hydrochloric Acid - Sodium Chlorite Method (Acid-Chlorite): 5 NaClO 2 + 4 HCl ⟶ 4 ClO 2 + 5 NaCl + 2 H 2 O 5\text{NaClO}_2 + 4\text{HCl} \longrightarrow 4\text{ClO}_2 + 5\text{NaCl} + 2\text{H}_2\text{O} 5 NaClO 2 ​ + 4 HCl ⟶ 4 ClO 2 ​ + 5 NaCl + 2 H 2 ​ O

Operational Benefits & Byproduct Regulations

No Halogenated DBP Formation: Chlorine dioxide does not react with humic and fulvic organic substances via electrophilic substitution, preventing the formation of trihalomethanes (TTHM) and haloacetic acids (HAA5).

Broad pH Independence: Unlike free chlorine, the disinfection efficacy of C l O 2 ClO_2 Cl O 2 ​ remains largely stable across a broad pH range of 6.0 to 10.0 .

Inorganic DBPs & Compliance Limits:

Chlorite ( C l O 2 − ClO_2^- Cl O 2 − ​ ): In water, chlorine dioxide is partially reduced to inorganic chlorite ( C l O 2 + e − → C l O 2 − ClO_2 + e^- \rightarrow ClO_2^- Cl O 2 ​ + e − → Cl O 2 − ​ ). Chlorite is a regulated DBP with an enforceable MCL of 1.0 mg/L .

Chlorine Dioxide Residual: Regulated with a Maximum Residual Disinfectant Level (MRDL) of 0.8 mg/L .

Chlorite Suppression: Utilities feed ferrous iron ( F e 2 + Fe^{2+} F e 2 + ) or sulfur-based reducing agents (sodium sulfite, sodium bisulfite) to reduce chlorite back to harmless chloride ( C l − Cl^- C l − ) before finished water enters the distribution system.

Loading diagram... Alternative Disinfection Comparison & Byproduct Chemistry

Comparative Disinfectant Dose/CT Required for 3-Log (99.9%) Inactivation of Cryptosporidium